- 01 Jul, 2019 40 commits
-
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 0cbade02 upstream. fstests generic/228 reported this failure that fuse fallocate does not honor what 'ulimit -f' has set. This adds the necessary inode_newsize_ok() check. Signed-off-by:
Liu Bo <bo.liu@linux.alibaba.com> Fixes: 05ba1f08 ("fuse: add FALLOCATE operation") Cc: <stable@vger.kernel.org> # v3.5 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 9de5be06 upstream. Writepage requests were cropped to i_size & 0xffffffff, which meant that mmaped writes to any file larger than 4G might be silently discarded. Fix by storing the file size in a properly sized variable (loff_t instead of size_t). Reported-by:
Antonio SJ Musumeci <trapexit@spawn.link> Fixes: 6eaf4782 ("fuse: writepages: crop secondary requests") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by:
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 40db569d upstream. There are wrongly set parenthesis in the code that are resulting in a wrong configuration being programmed for PLLM. The original fix was made by Danny Huang in the downstream kernel. The patch was tested on Nyan Big Tegra124 chromebook, PLLM rate changing works correctly now and system doesn't lock up after changing the PLLM rate due to EMC scaling. Cc: <stable@vger.kernel.org> Tested-by:
Steev Klimaszewski <steev@kali.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-By:
Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
ZhangXiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit f02f3755 upstream. stat command with soft mount never return after server is stopped. When alloc a new client, the state of the client will be set to NFS4CLNT_LEASE_EXPIRED. When the server is stopped, the state manager will work, and accord the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it will drain the slot table and lead other task to wait queue, until the client recovered. Then the stat command is hung. When discover server trunking, the client will renew the lease, but check the client state, it lead the client state corruption. So, we need to call state manager to recover it when detect server ip trunking. Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Janusz Krzysztofik authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 933c1320 upstream. After removal of clock_start() from before soc_camera_init_i2c() in soc_camera_probe() by commit 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650 driver could no longer probe the sensor successfully because its clock was no longer turned on in advance. The issue was initially worked around by adding that missing clock_start() equivalent to OMAP1 camera interface driver - the only user of this sensor - but a propoer fix should be rather implemented in the sensor driver code itself. Fix the issue by inserting a delay between the clock is turned on and the sensor I2C registers are read for the first time. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Fixes: 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Christoph Probst authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 6a54b2e0 upstream. Change strcat to strncpy in the "None" case to fix a buffer overflow when cinode->oplock is reset to 0 by another thread accessing the same cinode. It is never valid to append "None" to any other message. Consolidate multiple writes to cinode->oplock to reduce raciness. Signed-off-by:
Christoph Probst <kernel@probst.it> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Phong Tran authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 44086866 upstream. Now, make the loop explicit to avoid clang warning. ./include/linux/of.h:238:37: warning: multiple unsequenced modifications to 'cell' [-Wunsequenced] r = (r << 32) | be32_to_cpu(*(cell++)); ^~ ./include/linux/byteorder/generic.h:95:21: note: expanded from macro 'be32_to_cpu' ^ ./include/uapi/linux/byteorder/little_endian.h:40:59: note: expanded from macro '__be32_to_cpu' ^ ./include/uapi/linux/swab.h:118:21: note: expanded from macro '__swab32' ___constant_swab32(x) : \ ^ ./include/uapi/linux/swab.h:18:12: note: expanded from macro '___constant_swab32' (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \ ^ Signed-off-by:
Phong Tran <tranmanphong@gmail.com> Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/460Suggested-by:
David Laight <David.Laight@ACULAB.COM> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 4e0eaf23 upstream. Currently, the pages that are allocated for the single mode of MSC are not mapped into the device's dma space and the code is incorrectly using *_to_phys() in place of a dma address. This fails with IOMMU enabled and is otherwise bad practice. Fix the single mode buffer allocation to map the pages into the device's DMA space. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: ba82664c ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Yufen Yu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit ee37e621 upstream. When doing re-add, we need to ensure rdev->mddev->pers is not NULL, which can avoid potential NULL pointer derefence in fallowing add_bound_rdev(). Fixes: a6da4ef8 ("md: re-add a failed disk") Cc: Xiao Ni <xni@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: <stable@vger.kernel.org> # 4.4+ Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Tingwei Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit ee496da4 upstream. Number of free masters is not set correctly in stm free path. Fix this by properly adding the number of output channels before setting them to 0 in stm_output_disclaim(). Currently it is equivalent to doing nothing since master->nr_free is incremented by 0. Fixes: 7bd1d409 ("stm class: Introduce an abstraction for System Trace Module devices") Signed-off-by:
Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Cc: stable@vger.kernel.org # v4.4 Signed-off-by:
-
Junwei Hu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 532b0f7e ] Error message printed: modprobe: ERROR: could not insert 'tipc': Address family not supported by protocol. when modprobe tipc after the following patch: switch order of device registration, commit 7e27e8d6 ("tipc: switch order of device registration to fix a crash") Because sock_create_kern(net, AF_TIPC, ...) is called by tipc_topsrv_create_listener() in the initialization process of tipc_net_ops, tipc_socket_init() must be execute before that. I move tipc_socket_init() into function tipc_init_net(). Fixes: 7e27e8d6 ("tipc: switch order of device registration to fix a crash") Signed-off-by:
Junwei Hu <hujunwei4@huawei.com> Reported-by:
Wang Wang <wangwang2@huawei.com> Reviewed-by:
Kang Zhou <zhoukang7@huawei.com> Reviewed-by:
Suanming Mou <mousuanming@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Junwei Hu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 7e27e8d6 ] When tipc is loaded while many processes try to create a TIPC socket, a crash occurs: PANIC: Unable to handle kernel paging request at virtual address "dfff20000000021d" pc : tipc_sk_create+0x374/0x1180 [tipc] lr : tipc_sk_create+0x374/0x1180 [tipc] Exception class = DABT (current EL), IL = 32 bits Call trace: tipc_sk_create+0x374/0x1180 [tipc] __sock_create+0x1cc/0x408 __sys_socket+0xec/0x1f0 __arm64_sys_socket+0x74/0xa8 ... This is due to race between sock_create and unfinished register_pernet_device. tipc_sk_insert tries to do "net_generic(net, tipc_net_id)". but tipc_net_id is not initialized yet. So switch the order of the two to close the race. This can be reproduced with multiple processes doing socket(AF_TIPC, ...) and one process doing module removal. Fixes: a62fbcce ("tipc: make subscriber server support net namespace") Signed-off-by:
Xiaogang Wang <wangxiaogang3@huawei.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 3ebe1bca ] BUG: unable to handle kernel paging request at ffffffffa018f000 PGD 3270067 P4D 3270067 PUD 3271063 PMD 2307eb067 PTE 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 4138 Comm: modprobe Not tainted 5.1.0-rc7+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ppp_register_compressor+0x3e/0xd0 [ppp_generic] Code: 98 4a 3f e2 48 8b 15 c1 67 00 00 41 8b 0c 24 48 81 fa 40 f0 19 a0 75 0e eb 35 48 8b 12 48 81 fa 40 f0 19 a0 74 RSP: 0018:ffffc90000d93c68 EFLAGS: 00010287 RAX: ffffffffa018f000 RBX: ffffffffa01a3000 RCX: 000000000000001a RDX: ffff888230c750a0 RSI: 0000000000000000 RDI: ffffffffa019f000 RBP: ffffc90000d93c80 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0194080 R13: ffff88822ee1a700 R14: 0000000000000000 R15: ffffc90000d93e78 FS: 00007f2339557540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa018f000 CR3: 000000022bde4000 CR4: 00000000000006f0 Call Trace: ? 0xffffffffa01a3000 deflate_init+0x11/0x1000 [ppp_deflate] ? 0xffffffffa01a3000 do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If ppp_deflate fails to register in deflate_init, module initialization failed out, however ppp_deflate_draft may has been regiestred and not unregistered before return. Then the seconed modprobe will trigger crash like this. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Yunjian Wang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 00f9fec4 ] The error print within mlx4_flow_steer_promisc_add() should be a info print. Fixes: 592e49dd ('net/mlx4: Implement promiscuous mode with device managed flow-steering') Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit d7c04b05 ] When host is under high stress, it is very possible thread running netdev_wait_allrefs() returns from msleep(250) 10 seconds late. This leads to these messages in the syslog : [...] unregister_netdevice: waiting for syz_tun to become free. Usage count = 0 If the device refcount is zero, the wait is over. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 11988499 upstream. KVM allows userspace to violate consistency checks related to the guest's CPUID model to some degree. Generally speaking, userspace has carte blanche when it comes to guest state so long as jamming invalid state won't negatively affect the host. Currently this is seems to be a non-issue as most of the interesting EFER checks are missing, e.g. NX and LME, but those will be added shortly. Proactively exempt userspace from the CPUID checks so as not to break userspace. Note, the efer_reserved_bits check still applies to userspace writes as that mask reflects the host's capabilities, e.g. KVM shouldn't allow a guest to run with NX=1 if it has been disabled in the host. Fixes: d8017474 ("KVM: SVM: Only allow setting of EFER_SVME when CPUID SVM is set") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Michał Wadowski authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 56df90b6 upstream. Add patch for realtek codec in Lenovo B50-70 that fixes inverted internal microphone channel. Device IdeaPad Y410P has the same PCI SSID as Lenovo B50-70, but first one is about fix the noise and it didn't seem help in a later kernel version. So I replaced IdeaPad Y410P device description with B50-70 and apply inverted microphone fix. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1524215Signed-off-by:
Michał Wadowski <wadosm@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jiufei Xue authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit ec084de9 upstream. synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb switch may not go to the workqueue after synchronize_rcu(). Thus previous scheduled switches was not finished even flushing the workqueue, which will cause a NULL pointer dereferenced followed below. VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds. Have a nice day... BUG: unable to handle kernel NULL pointer dereference at 0000000000000278 evict+0xb3/0x180 iput+0x1b0/0x230 inode_switch_wbs_work_fn+0x3c0/0x6a0 worker_thread+0x4e/0x490 ? process_one_work+0x410/0x410 kthread+0xe6/0x100 ret_from_fork+0x39/0x50 Replace the synchronize_rcu() call with a rcu_barrier() to wait for all pending callbacks to finish. And inc isw_nr_in_flight after call_rcu() in inode_switch_wbs() to make more sense. Link: http://lkml.kernel.org/r/20190429024108.54150-1-jiufei.xue@linux.alibaba.comSigned-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by:
Tejun Heo <tj@kernel.org> Suggested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tejun Heo authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 7fc5854f upstream. sync_inodes_sb() can race against cgwb (cgroup writeback) membership switches and fail to writeback some inodes. For example, if an inode switches to another wb while sync_inodes_sb() is in progress, the new wb might not be visible to bdi_split_work_to_wbs() at all or the inode might jump from a wb which hasn't issued writebacks yet to one which already has. This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb switch path against sync_inodes_sb() so that sync_inodes_sb() is guaranteed to see all the target wbs and inodes can't jump wbs to escape syncing. v2: Fixed misplaced rwsem init. Spotted by Jiufei. Signed-off-by:
Jiufei Xue <xuejiufei@gmail.com> Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.comAcked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 767f015e upstream. If the user-provided IV needs to be aligned to the algorithm's alignmask, then skcipher_walk_virt() copies the IV into a new aligned buffer walk.iv. But skcipher_walk_virt() can fail afterwards, and then if the caller unconditionally accesses walk.iv, it's a use-after-free. arm32 xts-aes-neonbs doesn't set an alignmask, so currently it isn't affected by this despite unconditionally accessing walk.iv. However this is more subtle than desired, and it was actually broken prior to the alignmask being removed by commit cc477bf6 ("crypto: arm/aes - replace bit-sliced OpenSSL NEON code"). Thus, update xts-aes-neonbs to start checking the return value of skcipher_walk_virt(). Fixes: e4e7f10b ("ARM: add support for bit sliced AES using NEON instructions") Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit edaf28e9 upstream. If the user-provided IV needs to be aligned to the algorithm's alignmask, then skcipher_walk_virt() copies the IV into a new aligned buffer walk.iv. But skcipher_walk_virt() can fail afterwards, and then if the caller unconditionally accesses walk.iv, it's a use-after-free. salsa20-generic doesn't set an alignmask, so currently it isn't affected by this despite unconditionally accessing walk.iv. However this is more subtle than desired, and it was actually broken prior to the alignmask being removed by commit b62b3db7 ("crypto: salsa20-generic - cleanup and convert to skcipher API"). Since salsa20-generic does not update the IV and does not need any IV alignment, update it to use req->iv instead of walk.iv. Fixes: 2407d608 ("[CRYPTO] salsa20: Salsa20 stream cipher") Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 5e27f38f upstream. If the rfc7539 template is instantiated with specific implementations, e.g. "rfc7539(chacha20-generic,poly1305-generic)" rather than "rfc7539(chacha20,poly1305)", then the implementation names end up included in the instance's cra_name. This is incorrect because it then prevents all users from allocating "rfc7539(chacha20,poly1305)", if the highest priority implementations of chacha20 and poly1305 were selected. Also, the self-tests aren't run on an instance allocated in this way. Fix it by setting the instance's cra_name from the underlying algorithms' actual cra_names, rather than from the requested names. This matches what other templates do. Fixes: 71ebc4d1 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539") Cc: <stable@vger.kernel.org> # v4.2+ Cc: Martin Willi <martin@strongswan.org> Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit f699594d upstream. GCM instances can be created by either the "gcm" template, which only allows choosing the block cipher, e.g. "gcm(aes)"; or by "gcm_base", which allows choosing the ctr and ghash implementations, e.g. "gcm_base(ctr(aes-generic),ghash-generic)". However, a "gcm_base" instance prevents a "gcm" instance from being registered using the same implementations. Nor will the instance be found by lookups of "gcm". This can be used as a denial of service. Moreover, "gcm_base" instances are never tested by the crypto self-tests, even if there are compatible "gcm" tests. The root cause of these problems is that instances of the two templates use different cra_names. Therefore, fix these problems by making "gcm_base" instances set the same cra_name as "gcm" instances, e.g. "gcm(aes)" instead of "gcm_base(ctr(aes-generic),ghash-generic)". This requires extracting the block cipher name from the name of the ctr algorithm. It also requires starting to verify that the algorithms are really ctr and ghash, not something else entirely. But it would be bizarre if anyone were actually using non-gcm-compatible algorithms with gcm_base, so this shouldn't break anyone in practice. Fixes: d00aa19b ("[CRYPTO] gcm: Allow block cipher parameter") Cc: stable@vger.kernel.org Signed-off-by:
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 9b40f79c upstream. Fix to return error code -EINVAL from the invalid alg ivsize error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Kamlakant Patel authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 55be8658 upstream. According to ipmi spec, block number is a number that is incremented, starting with 0, for each new block of message data returned using the middle transaction. Here, the 'blocknum' is data[0] which always starts from zero(0) and 'ssif_info->multi_pos' starts from 1. So, we need to add +1 to blocknum while comparing with multi_pos. Fixes: 7d6380cd ("ipmi:ssif: Fix handling of multi-part return messages"). Reported-by:
Kiran Kolukuluru <kirank@ami.com> Signed-off-by:
Kamlakant Patel <kamlakantp@marvell.com> Message-Id: <1556106615-18722-1-git-send-email-kamlakantp@marvell.com> [Also added a debug log if the block numbers don't match.] Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 4.4 Signed-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 1bee2add upstream. In journal_reclaim() ja->cur_idx of each cache will be update to reclaim available journal buckets. Variable 'int n' is used to count how many cache is successfully reclaimed, then n is set to c->journal.key by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache() loop will write the jset data onto each cache. The problem is, if all jouranl buckets on each cache is full, the following code in journal_reclaim(), 529 for_each_cache(ca, c, iter) { 530 struct journal_device *ja = &ca->journal; 531 unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets; 532 533 /* No space available on this device */ 534 if (next == ja->discard_idx) 535 continue; 536 537 ja->cur_idx = next; 538 k->ptr[n++] = MAKE_PTR(0, 539 bucket_to_sector(c, ca->sb.d[ja->cur_idx]), 540 ca->sb.nr_this_dev); 541 } 542 543 bkey_init(k); 544 SET_KEY_PTRS(k, n); If there is no available bucket to reclaim, the if() condition at line 534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS() will set KEY_PTRS field of c->journal.key to 0. Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in journal_write_unlocked() the journal data is written in following loop, 649 for (i = 0; i < KEY_PTRS(k); i++) { 650-671 submit journal data to cache device 672 } If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data won't be written to cache device here. If system crahed or rebooted before bkeys of the lost journal entries written into btree nodes, data corruption will be reported during bcache reload after rebooting the system. Indeed there is only one cache in a cache set, there is no need to set KEY_PTRS field in journal_reclaim() at all. But in order to keep the for_each_cache() logic consistent for now, this patch fixes the above problem by not setting 0 KEY_PTRS of journal key, if there is no bucket available to reclaim. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Liang Chen authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit a4b732a2 upstream. There is a race between cache device register and cache set unregister. For an already registered cache device, register_bcache will call bch_is_open to iterate through all cachesets and check every cache there. The race occurs if cache_set_free executes at the same time and clears the caches right before ca is dereferenced in bch_is_open_cache. To close the race, let's make sure the clean up work is protected by the bch_register_lock as well. This issue can be reproduced as follows, while true; do echo /dev/XXX> /sys/fs/bcache/register ; done& while true; do echo 1> /sys/block/XXX/bcache/set/unregister ; done & and results in the following oops, [ +0.000053] BUG: unable to handle kernel NULL pointer dereference at 0000000000000998 [ +0.000457] #PF error: [normal kernel read fault] [ +0.000464] PGD 800000003ca9d067 P4D 800000003ca9d067 PUD 3ca9c067 PMD 0 [ +0.000388] Oops: 0000 [#1] SMP PTI [ +0.000269] CPU: 1 PID: 3266 Comm: bash Not tainted 5.0.0+ #6 [ +0.000346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014 [ +0.000472] RIP: 0010:register_bcache+0x1829/0x1990 [bcache] [ +0.000344] Code: b0 48 83 e8 50 48 81 fa e0 e1 10 c0 0f 84 a9 00 00 00 48 89 c6 48 89 ca 0f b7 ba 54 04 00 00 4c 8b 82 60 0c 00 00 85 ff 74 2f <49> 3b a8 98 09 00 00 74 4e 44 8d 47 ff 31 ff 49 c1 e0 03 eb 0d [ +0.000839] RSP: 0018:ffff92ee804cbd88 EFLAGS: 00010202 [ +0.000328] RAX: ffffffffc010e190 RBX: ffff918b5c6b5000 RCX: ffff918b7d8e0000 [ +0.000399] RDX: ffff918b7d8e0000 RSI: ffffffffc010e190 RDI: 0000000000000001 [ +0.000398] RBP: ffff918b7d318340 R08: 0000000000000000 R09: ffffffffb9bd2d7a [ +0.000385] R10: ffff918b7eb253c0 R11: ffffb95980f51200 R12: ffffffffc010e1a0 [ +0.000411] R13: fffffffffffffff2 R14: 000000000000000b R15: ffff918b7e232620 [ +0.000384] FS: 00007f955bec2740(0000) GS:ffff918b7eb00000(0000) knlGS:0000000000000000 [ +0.000420] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000801] CR2: 0000000000000998 CR3: 000000003cad6000 CR4: 00000000001406e0 [ +0.000837] Call Trace: [ +0.000682] ? _cond_resched+0x10/0x20 [ +0.000691] ? __kmalloc+0x131/0x1b0 [ +0.000710] kernfs_fop_write+0xfa/0x170 [ +0.000733] __vfs_write+0x2e/0x190 [ +0.000688] ? inode_security+0x10/0x30 [ +0.000698] ? selinux_file_permission+0xd2/0x120 [ +0.000752] ? security_file_permission+0x2b/0x100 [ +0.000753] vfs_write+0xa8/0x1a0 [ +0.000676] ksys_write+0x4d/0xb0 [ +0.000699] do_syscall_64+0x3a/0xf0 [ +0.000692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit bfc61c36 upstream. When finding out which inodes have references on a particular extent, done by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both v1 and v2) ioctl and from scrub we use the transaction join API to grab a reference on the currently running transaction, since in order to give accurate results we need to inspect the delayed references of the currently running transaction. However, if there is currently no running transaction, the join operation will create a new transaction. This is inefficient as the transaction will eventually be committed, doing unnecessary IO and introducing a potential point of failure that will lead to a transaction abort due to -ENOSPC, as recently reported [1]. That's because the join, creates the transaction but does not reserve any space, so when attempting to update the root item of the root passed to btrfs_join_transaction(), during the transaction commit, we can end up failling with -ENOSPC. Users of a join operation are supposed to actually do some filesystem changes and reserve space by some means, which is not the case of iterate_extent_inodes(), it is a read-only operation for all contextes from which it is called. The reported [1] -ENOSPC failure stack trace is the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- So fix that by using the attach API, which does not create a transaction when there is currently no running transaction. [1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/Reported-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Debabrata Banerjee authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 50b29d8f upstream. Instead of removing EXT4_MOUNT_JOURNAL_CHECKSUM from s_def_mount_opt as I assume was intended, all other options were blown away leading to _ext4_show_options() output being incorrect. Fixes: 1e381f60 ("ext4: do not allow journal_opts for fs w/o journal") Signed-off-by:
Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
-
Kirill Tkhai authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 310a997f upstream. It is never possible, that number of block groups decreases, since only online grow is supported. But after a growing occured, we have to zero inode tables for just created new block groups. Fixes: 19c5246d ("ext4: add new online resize interface") Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Sergei Trofimovich authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 46ca3f73 upstream. The bug manifests as an attempt to access deallocated memory: BUG: unable to handle kernel paging request at ffff9c8735448000 #PF error: [PROT] [WRITE] PGD 288a05067 P4D 288a05067 PUD 288a07067 PMD 7f60c2063 PTE 80000007f5448161 Oops: 0003 [#1] PREEMPT SMP CPU: 6 PID: 388 Comm: loadkeys Tainted: G C 5.0.0-rc6-00153-g5ded5871 #91 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M-D3H, BIOS F12 11/14/2013 RIP: 0010:__memmove+0x81/0x1a0 Code: 4c 89 4f 10 4c 89 47 18 48 8d 7f 20 73 d4 48 83 c2 20 e9 a2 00 00 00 66 90 48 89 d1 4c 8b 5c 16 f8 4c 8d 54 17 f8 48 c1 e9 03 <f3> 48 a5 4d 89 1a e9 0c 01 00 00 0f 1f 40 00 48 89 d1 4c 8b 1e 49 RSP: 0018:ffffa1b9002d7d08 EFLAGS: 00010203 RAX: ffff9c873541af43 RBX: ffff9c873541af43 RCX: 00000c6f105cd6bf RDX: 0000637882e986b6 RSI: ffff9c8735447ffb RDI: ffff9c8735447ffb RBP: ffff9c8739cd3800 R08: ffff9c873b802f00 R09: 00000000fffff73b R10: ffffffffb82b35f1 R11: 00505b1b004d5b1b R12: 0000000000000000 R13: ffff9c873541af3d R14: 000000000000000b R15: 000000000000000c FS: 00007f450c390580(0000) GS:ffff9c873f180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9c8735448000 CR3: 00000007e213c002 CR4: 00000000000606e0 Call Trace: vt_do_kdgkb_ioctl+0x34d/0x440 vt_ioctl+0xba3/0x1190 ? __bpf_prog_run32+0x39/0x60 ? mem_cgroup_commit_charge+0x7b/0x4e0 tty_ioctl+0x23f/0x920 ? preempt_count_sub+0x98/0xe0 ? __seccomp_filter+0x67/0x600 do_vfs_ioctl+0xa2/0x6a0 ? syscall_trace_enter+0x192/0x2d0 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The bug manifests on systemd systems with multiple vtcon devices: # cat /sys/devices/virtual/vtconsole/vtcon0/name (S) dummy device # cat /sys/devices/virtual/vtconsole/vtcon1/name (M) frame buffer device There systemd runs 'loadkeys' tool in tapallel for each vtcon instance. This causes two parallel ioctl(KDSKBSENT) calls to race into adding the same entry into 'func_table' array at: drivers/tty/vt/keyboard.c:vt_do_kdgkb_ioctl() The function has no locking around writes to 'func_table'. The simplest reproducer is to have initrams with the following init on a 8-CPU machine x86_64: #!/bin/sh loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & wait The change adds lock on write path only. Reads are still racy. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Jiri Slaby <jslaby@suse.com> Link: https://lkml.org/lkml/2019/2/17/256Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Steve Twiss authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 6b4814a9 upstream. Mismatch between what is found in the Datasheets for DA9063 and DA9063L provided by Dialog Semiconductor, and the register names provided in the MFD registers file. The changes are for the OTP (one-time-programming) control registers. The two naming errors are OPT instead of OTP, and COUNT instead of CONT (i.e. control). Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Shuning Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit e091eab0 upstream. In some cases, ocfs2_iget() reads the data of inode, which has been deleted for some reason. That will make the system panic. So We should judge whether this inode has been deleted, and tell the caller that the inode is a bad inode. For example, the ocfs2 is used as the backed of nfs, and the client is nfsv3. This issue can be reproduced by the following steps. on the nfs server side, ..../patha/pathb Step 1: The process A was scheduled before calling the function fh_verify. Step 2: The process B is removing the 'pathb', and just completed the call to function dput. Then the dentry of 'pathb' has been deleted from the dcache, and all ancestors have been deleted also. The relationship of dentry and inode was deleted through the function hlist_del_init. The following is the call stack. dentry_iput->hlist_del_init(&dentry->d_u.d_alias) At this time, the inode is still in the dcache. Step 3: The process A call the function ocfs2_get_dentry, which get the inode from dcache. Then the refcount of inode is 1. The following is the call stack. nfsd3_proc_getacl->fh_verify->exportfs_decode_fh->fh_to_dentry(ocfs2_get_dentry) Step 4: Dirty pages are flushed by bdi threads. So the inode of 'patha' is evicted, and this directory was deleted. But the inode of 'pathb' can't be evicted, because the refcount of the inode was 1. Step 5: The process A keep running, and call the function reconnect_path(in exportfs_decode_fh), which call function ocfs2_get_parent of ocfs2. Get the block number of parent directory(patha) by the name of ... Then read the data from disk by the block number. But this inode has been deleted, so the system panic. Process A Process B 1. in nfsd3_proc_getacl | 2. | dput 3. fh_to_dentry(ocfs2_get_dentry) | 4. bdi flush dirty cache | 5. ocfs2_iget | [283465.542049] OCFS2: ERROR (device sdp): ocfs2_validate_inode_block: Invalid dinode #580640: OCFS2_VALID_FL not set [283465.545490] Kernel panic - not syncing: OCFS2: (device sdp): panic forced after error [283465.546889] CPU: 5 PID: 12416 Comm: nfsd Tainted: G W 4.1.12-124.18.6.el6uek.bug28762940v3.x86_64 #2 [283465.548382] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/21/2015 [283465.549657] 0000000000000000 ffff8800a56fb7b8 ffffffff816e839c ffffffffa0514758 [283465.550392] 000000000008dc20 ffff8800a56fb838 ffffffff816e62d3 0000000000000008 [283465.551056] ffff880000000010 ffff8800a56fb848 ffff8800a56fb7e8 ffff88005df9f000 [283465.551710] Call Trace: [283465.552516] [<ffffffff816e839c>] dump_stack+0x63/0x81 [283465.553291] [<ffffffff816e62d3>] panic+0xcb/0x21b [283465.554037] [<ffffffffa04e66b0>] ocfs2_handle_error+0xf0/0xf0 [ocfs2] [283465.554882] [<ffffffffa04e7737>] __ocfs2_error+0x67/0x70 [ocfs2] [283465.555768] [<ffffffffa049c0f9>] ocfs2_validate_inode_block+0x229/0x230 [ocfs2] [283465.556683] [<ffffffffa047bcbc>] ocfs2_read_blocks+0x46c/0x7b0 [ocfs2] [283465.557408] [<ffffffffa049bed0>] ? ocfs2_inode_cache_io_unlock+0x20/0x20 [ocfs2] [283465.557973] [<ffffffffa049f0eb>] ocfs2_read_inode_block_full+0x3b/0x60 [ocfs2] [283465.558525] [<ffffffffa049f5ba>] ocfs2_iget+0x4aa/0x880 [ocfs2] [283465.559082] [<ffffffffa049146e>] ocfs2_get_parent+0x9e/0x220 [ocfs2] [283465.559622] [<ffffffff81297c05>] reconnect_path+0xb5/0x300 [283465.560156] [<ffffffff81297f46>] exportfs_decode_fh+0xf6/0x2b0 [283465.560708] [<ffffffffa062faf0>] ? nfsd_proc_getattr+0xa0/0xa0 [nfsd] [283465.561262] [<ffffffff810a8196>] ? prepare_creds+0x26/0x110 [283465.561932] [<ffffffffa0630860>] fh_verify+0x350/0x660 [nfsd] [283465.562862] [<ffffffffa0637804>] ? nfsd_cache_lookup+0x44/0x630 [nfsd] [283465.563697] [<ffffffffa063a8b9>] nfsd3_proc_getattr+0x69/0xf0 [nfsd] [283465.564510] [<ffffffffa062cf60>] nfsd_dispatch+0xe0/0x290 [nfsd] [283465.565358] [<ffffffffa05eb892>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc] [283465.566272] [<ffffffffa05ea652>] svc_process_common+0x412/0x6a0 [sunrpc] [283465.567155] [<ffffffffa05eaa03>] svc_process+0x123/0x210 [sunrpc] [283465.568020] [<ffffffffa062c90f>] nfsd+0xff/0x170 [nfsd] [283465.568962] [<ffffffffa062c810>] ? nfsd_destroy+0x80/0x80 [nfsd] [283465.570112] [<ffffffff810a622b>] kthread+0xcb/0xf0 [283465.571099] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 [283465.572114] [<ffffffff816f11b8>] ret_from_fork+0x58/0x90 [283465.573156] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 Link: http://lkml.kernel.org/r/1554185919-3010-1-git-send-email-sunny.s.zhang@oracle.comSigned-off-by:
Shuning Zhang <sunny.s.zhang@oracle.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: piaojun <piaojun@huawei.com> Cc: "Gang He" <ghe@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jiri Kosina authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 134fca90 upstream. The semantics of what mincore() considers to be resident is not completely clear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache". That's potentially a problem, as that [in]directly exposes meta-information about pagecache / memory mapping state even about memory not strictly belonging to the process executing the syscall, opening possibilities for sidechannel attacks. Change the semantics of mincore() so that it only reveals pagecache information for non-anonymous mappings that belog to files that the calling process could (if it tried to) successfully open for writing; otherwise we'd be including shared non-exclusive mappings, which - is the sidechannel - is not the usecase for mincore(), as that's primarily used for data, not (shared) text [jkosina@suse.cz: v2] Link: http://lkml.kernel.org/r/20190312141708.6652-2-vbabka@suse.cz [mhocko@suse.com: restructure can_do_mincore() conditions] Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1903062342020.19912@cbobk.fhfr.pmSigned-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Josh Snyder <joshs@netflix.com> Acked-by:
Michal Hocko <mhocko@suse.com> Originally-by:
Dominique Martinet <asmadeus@codewreck.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Chinner <david@fromorbit.com> Cc: Kevin Easton <kevin@guarana.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Cyril Hrubis <chrubis@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daniel Gruss <daniel@gruss.cc> Signed-off-by:
-
Curtis Malainey authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit a46eb523 upstream. The current algorithm allows 3 types of transfers, 16bit, 32bit and burst. According to Realtek, 16bit transfers have a special restriction in that it is restricted to the memory region of 0x18020000 ~ 0x18021000. This region is the memory location of the I2C registers. The current algorithm does not uphold this restriction and therefore fails to complete writes. Since this has been broken for some time it likely no one is using it. Better to simply disable the 16 bit writes. This will allow users to properly load firmware over SPI without data corruption. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Reviewed-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Jon Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit ecb2795c upstream. The max98090 driver defines 3 DAPM muxes; one for the right line output (LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux) and one for the right headphone mixer source (MIXHPRSEL Mux). The same bit is used for the mux as well as the DAPM enable, and although the mux can be correctly configured, after playback has completed, the mux will be reset during the disable phase. This is preventing the state of these muxes from being saved and restored correctly on system reboot. Fix this by marking these muxes as SND_SOC_NOPM. Note this has been verified this on the Tegra124 Nyan Big which features the MAX98090 codec. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
Kailang Yang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 607ca3bd upstream. Let EAPD turn on after set pin output. [ NOTE: This change is supposed to reduce the possible click noises at (runtime) PM resume. The functionality should be same (i.e. the verbs are executed correctly) no matter which order is, so this should be safe to apply for all codecs -- tiwai ] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 7f641e26 upstream. On the machines with AMD GPU or Nvidia GPU, we often meet this issue: after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting even there is no any monitors plugged. When this problem happens, we check the /proc/asound/cardX/eld#N.M, we will find the monitor_present=1, eld_valid=0. The root cause is BIOS or GPU driver makes the PRESENCE valid even no monitor plugged, and of course the driver will not get the valid eld_data subsequently. In this situation, we should not report the jack_plugged event, to do so, let us change the function hdmi_present_sense_via_verbs(). In this function, it reads the pin_sense via snd_hda_pin_sense(), after calling this function, the jack_dirty is 0, and before exiting via_verbs(), we change the shadow pin_sense according to both monitor_present and eld_valid, then in the snd_hda_jack_report_sync(), since the jack_dirty is still 0, it will report jack event according to this modified shadow pin_sense. After this change, the driver will not report Jack_is_plugged event through hdmi_present_sense_via_verbs() if monitor_present is 1 and eld_valid is 0. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit cb517359 upstream. In parse_audio_selector_unit(), the string array 'namelist' is allocated through kmalloc_array(), and each string pointer in this array, i.e., 'namelist[]', is allocated through kmalloc() in the following for loop. Then, a control instance 'kctl' is created by invoking snd_ctl_new1(). If an error occurs during the creation process, the string array 'namelist', including all string pointers in the array 'namelist[]', should be freed, before the error code ENOMEM is returned. However, the current code does not free 'namelist[]', resulting in memory leaks. To fix the above issue, free all string pointers 'namelist[]' in a loop. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit dec3d0b1 upstream. The ->digest() method of crct10dif-pclmul reads the current CRC value from the shash_desc context. But this value is uninitialized, causing crypto_shash_digest() to compute the wrong result. Fix it. Probably this wasn't noticed before because lib/crc-t10dif.c only uses crypto_shash_update(), not crypto_shash_digest(). Likewise, crypto_shash_digest() is not yet tested by the crypto self-tests because those only test the ahash API which only uses shash init/update/final. Fixes: 0b95a7f8 ("crypto: crct10dif - Glue code to cast accelerated CRCT10DIF assembly as a crypto transform") Cc: <stable@vger.kernel.org> # v3.11+ Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
