All accesses to devlink structure from userspace and drivers are locked
with devlink->lock instance mutex. Also, devlinks xa_array iteration is
taken care of by iteration helpers taking devlink reference.

Therefore, remove devlink_mutex as it is no longer needed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert reload command to behave the same way as the rest of the
commands and let if be called with devlink->lock held. Remove the
temporary devl_lock taking from drivers. As the DEVLINK_NL_FLAG_NO_LOCK
flag is no longer used, remove it alongside.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new mark called "unregistering" to be set at the beginning of
devlink_unregister() function. Check this mark during devlinks
iteration in order to prevent getting a reference of devlink which is
being currently unregistered.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__udp_sysctl_init() is called for init_net via udp_sysctl_ops.

While at it, we can rename __udp_sysctl_init() to udp_sysctl_init().

Fixes: 1e802951 ("udp: Move the udp sysctl to namespace.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.20-20220731' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:

====================
pull-request: can-next 2022-07-31

this is a pull request of 36 patches for net-next/master.

The 1st patch is by me and fixes a typo in the mcp251xfd driver.

Vincent Mailhol contributes a series of 9 patches, which clean up the
drivers to make use of KBUILD_MODNAME instead of hard coded names and
remove DRV_VERSION.

Followed by 3 patches by Vincent Mailhol that directly set the
ethtool_ops in instead of calling a function in the slcan, c_can and
flexcan driver.

Vincent Mailhol contributes a KBUILD_MODNAME and pr_fmt cleanup patch
for the slcan driver. Dario Binacchi contributes 6 patches to clean up
the driver and remove the legacy driver infrastructure.

The next 14 patches are by Vincent Mailhol and target the various
drivers, they add ethtool support and reporting of timestamping
capabilities.

Another patch by Vincent Mailhol for the etas_es58x driver to remove
useless calls to usb_fill_bulk_urb().

The last patch is by Christophe JAILLET and fixes a broken link to
Documentation in the can327 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 482a4360 ("docs: networking: convert netdevices.txt to
ReST"), Documentation/networking/netdevices.txt has been replaced by
Documentation/networking/netdevices.rst.

Update the comment accordingly to avoid a 'make htmldocs' warning.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/all/6a54aff884ea4f84b661527d75aabd6632140715.1659249135.git.christophe.jaillet@wanadoo.fr
Fixes: 43da2f07 ("can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Saeed Mahameed says:

====================
mlx5-updates-2022-07-28

Misc updates to mlx5 driver:

1) Gal corrects to use skb_tcp_all_headers on encapsulated skbs.

2) Roi Adds the support for offloading standalone police actions.

3) lama, did some refactoring to minimize code coupling with
mlx5e_priv "god object" in some of the follows, and converts some of the
objects to pointers to preserve on memory when these objects aren't needed.
This is part one of two parts series.

* tag 'mlx5-updates-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Move mlx5e_init_l2_addr to en_main
  net/mlx5e: Split en_fs ndo's and move to en_main
  net/mlx5e: Separate mlx5e_set_rx_mode_work and move caller to en_main
  net/mlx5e: Add mdev to flow_steering struct
  net/mlx5e: Report flow steering errors with mdev err report API
  net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer
  net/mlx5e: Allocate VLAN and TC for featured profiles only
  net/mlx5e: Make mlx5e_tc_table private
  net/mlx5e: Convert mlx5e_tc_table member of mlx5e_flow_steering to pointer
  net/mlx5e: TC, Support tc action api for police
  net/mlx5e: TC, Separate get/update/replace meter functions
  net/mlx5e: Add red and green counters for metering
  net/mlx5e: TC, Allocate post meter ft per rule
  net/mlx5: DR, Add support for flow metering ASO
  net/mlx5e: Fix wrong use of skb_tcp_all_headers() with encapsulation
====================

Link: https://lore.kernel.org/r/20220728205728.143074-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-07-28

This series contains updates to ice driver only.

Michal allows for VF true promiscuous mode to be set for multiple VFs
and adds clearing of promiscuous filters when VF trust is removed.

Maciej refactors ice_set_features() to track/check changed features
instead of constantly checking against netdev features and adds support for
NETIF_F_LOOPBACK.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: allow toggling loopback mode via ndo_set_features callback
  ice: compress branches in ice_set_features()
  ice: Fix promiscuous mode not turning off
  ice: Introduce enabling promiscuous mode on multiple VF's
====================

Link: https://lore.kernel.org/r/20220728195538.3391360-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Edward Cree says:

====================
sfc: VF representors for EF100 - RX side

This series adds the receive path for EF100 VF representors, plus other
 minor features such as statistics.
====================

Link: https://lore.kernel.org/r/cover.1659034549.git.ecree.xilinx@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It's not truly a ring, but the maximum length of the list of queued RX
 SKBs is analogous to an RX ring size, so use that API to configure it.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Representors do not want to be subject to the PF's Ethernet address
 filters, since traffic from VFs will typically have a destination
 either elsewhere on the link segment or on an overlay network.
So, create a dynamic m-port with promiscuous and all-multicast
 filters, and set it as the egress port of representor default rules.
 Since the m-port is an alias of the calling PF's own m-port, traffic
 will still be delivered to the PF's RXQs, but it will be subject to
 the VNRX filter rules installed on the dynamic m-port (specified by
 the v-port ID field of the filter spec).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We need to be able to drop the efx->filter_sem in ef100_filter_table_up()
 so that we can call functions that insert filters (and thus take that
 rwsem for read), which means the efx->type->filter_table_probe method
 needs to be responsible for taking the lock in the first place.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Default rules are low-priority switching rules which the hardware uses
 in the absence of higher-priority rules.  Each representor requires a
 corresponding rule matching traffic from its representee VF and
 delivering to the PF (where a check on INGRESS_MPORT in
 __ef100_rx_packet() will direct it to the representor).  No rule is
 required in the reverse direction, because representor TX uses a TX
 override descriptor to bypass the MAE and deliver directly to the VF.
Since inserting any rule into the MAE disables the firmware's own
 default rules, also insert a pair of rules to connect the PF to the
 physical network port and vice-versa.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the source m-port of a packet in __ef100_rx_packet() is a VF,
 hand off the packet to the corresponding representor with
 efx_ef100_rep_rx_packet().
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If not, for now drop them and warn.  A subsequent patch will look up
 the source m-port to try and find a representor to deliver them to.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Traffic delivered to the (MAE admin) PF could be from either the wire
 or a VF.  The INGRESS_MPORT field of the RX prefix distinguishes these;
 base_mport is the value this field will have for traffic from the wire
 (which should be delivered to the PF's netdevice, not a representor).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Representor RX uses a NAPI context driven by a 'fake interrupt': when
 the parent PF receives a packet destined for the representor, it adds
 it to an SKB list (efv->rx_list), and schedules NAPI if the 'fake
 interrupt' is primed.  The NAPI poll then pulls packets off this list
 and feeds them to the stack with netif_receive_skb_list().
This scheme allows us to decouple representor RX from the parent PF's
 RX fast-path.
This patch implements the 'top half', which builds an SKB, copies data
 into it from the RX buffer (which can then be released), adds it to
 the queue and fires the 'fake interrupt' if necessary.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds the 'bottom half' napi->poll routine for representor RX.
See the next patch (with the top half) for an explanation of the 'fake
 interrupt' scheme used to drive this NAPI context.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Implement .ndo_get_stats64() method to read values out of struct
 efx_rep_sw_stats.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The "ret" variable needs to be initialized at the start.

Fixes: 52323ef7 ("net: marvell: prestera: add phylink support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuKeBBuGtsmd7QdT@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use "jiffies != now" to replace "jiffies - now > 0" to make
code more readable. We want to put a limit on how long the
loop can run for before rescheduling.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220729061712.22666-1-yuzhe@nfschina.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v5.20

Fourth set of patches for v5.20, last few patches before the merge
window. Only driver changes this time, mostly just fixes and cleanup.

Major changes:

brcmfmac
 - support brcm,ccode-map-trivial DT property

wcn36xx
 - add debugfs file to show firmware feature strings

* tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (36 commits)
  wifi: rtw88: check the return value of alloc_workqueue()
  wifi: rtw89: 8852a: adjust IMR for SER L1
  wifi: rtw89: 8852a: update RF radio A/B R56
  wifi: wcn36xx: Add debugfs entry to read firmware feature strings
  wifi: wcn36xx: Move capability bitmap to string translation function to firmware.c
  wifi: wcn36xx: Move firmware feature bit storage to dedicated firmware.c file
  wifi: wcn36xx: Rename clunky firmware feature bit enum
  wifi: brcmfmac: prevent double-free on hardware-reset
  wifi: brcmfmac: support brcm,ccode-map-trivial DT property
  dt-bindings: bcm4329-fmac: add optional brcm,ccode-map-trivial
  wifi: brcmfmac: Replace default (not configured) MAC with a random MAC
  wifi: brcmfmac: Add brcmf_c_set_cur_etheraddr() helper
  wifi: brcmfmac: Remove #ifdef guards for PM related functions
  wifi: brcmfmac: use strreplace() in brcmf_of_probe()
  wifi: plfxlc: Use eth_zero_addr() to assign zero address
  wifi: wilc1000: use existing iftype variable to store the interface type
  wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPI
  wifi: wilc1000: cancel the connect operation during interface down
  wifi: wilc1000: get correct length of string WID from received config packet
  wifi: wilc1000: set station_info flag only when signal value is valid
  ...
====================

Link: https://lore.kernel.org/r/20220729192832.A5011C433D6@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko says:

====================
 bpf-next 2022-07-29

We've added 22 non-merge commits during the last 4 day(s) which contain
a total of 27 files changed, 763 insertions(+), 120 deletions(-).

The main changes are:

1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper,
   from Paul Chaignon.

2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong.

3) Fix for XDP frame length calculation, from Lorenzo Bianconi.

4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate
   s390x quirks with socketcall(), from Ilya Leoshkevich.

5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI,
   from Daniel Müller.

6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai.

7) Fix allocation warnings in netdevsim, from Jakub Kicinski.

8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton.

9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev.

10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei,
    Jörn-Thorben Hinz, Yang Li.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits)
  bpf: Remove unneeded semicolon
  libbpf: Add bpf_obj_get_opts()
  netdevsim: Avoid allocation warnings triggered from user space
  bpf: Fix NULL pointer dereference when registering bpf trampoline
  bpf: Fix test_progs -j error with fentry/fexit tests
  selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout
  bpftool: Don't try to return value from void function in skeleton
  bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro
  bpf: btf: Fix vsnprintf return value check
  libbpf: Support PPC in arch_specific_syscall_pfx
  selftests/bpf: Adjust vmtest.sh to use local kernel configuration
  selftests/bpf: Copy over libbpf configs
  selftests/bpf: Sort configuration
  selftests/bpf: Attach to socketcall() in test_probe_user
  libbpf: Extend BPF_KSYSCALL documentation
  bpf, devmap: Compute proper xdp_frame len redirecting frames
  bpf: Fix bpf_xdp_pointer return pointer
  selftests/bpf: Don't assign outer source IP to host
  bpf: Set flow flag to allow any source IP in bpf_tunnel_key
  geneve: Use ip_tunnel_key flow flags in route lookups
  ...
====================

Link: https://lore.kernel.org/r/20220729230948.1313527-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eliminate the following coccicheck warning:
/kernel/bpf/trampoline.c:101:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220725222733.55613-1-yang.lee@linux.alibaba.com

Add an extensible variant of bpf_obj_get() capable of setting the
`file_flags` parameter.

This parameter is needed to enable unprivileged access to BPF maps.
Without a method like this, users must manually make the syscall.
Signed-off-by: Joe Burton <jevburton@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com

We need to suppress warnings from sily map sizes. Also switch
from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood
the flags when writing this code.

Fixes: 395cacb5 ("netdevsim: bpf: support fake map offload")
Reported-by: syzbot+ad24705d3fd6463b18c6@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220726213605.154204-1-kuba@kernel.org

A panic was reported on arm64:

[   44.517109] audit: type=1334 audit(1658859870.268:59): prog-id=19 op=LOAD
[   44.622031] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000010
[   44.624321] Mem abort info:
[   44.625049]   ESR = 0x0000000096000004
[   44.625935]   EC = 0x25: DABT (current EL), IL = 32 bits
[   44.627182]   SET = 0, FnV = 0
[   44.627930]   EA = 0, S1PTW = 0
[   44.628684]   FSC = 0x04: level 0 translation fault
[   44.629788] Data abort info:
[   44.630474]   ISV = 0, ISS = 0x00000004
[   44.631362]   CM = 0, WnR = 0
[   44.632041] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100ab5000
[   44.633494] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000
[   44.635202] Internal error: Oops: 96000004 [#1] SMP
[   44.636452] Modules linked in: xfs crct10dif_ce ghash_ce virtio_blk
virtio_console virtio_mmio qemu_fw_cfg
[   44.638713] CPU: 2 PID: 1 Comm: systemd Not tainted 5.19.0-rc7 #1
[   44.640164] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[   44.641799] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   44.643404] pc : ftrace_set_filter_ip+0x24/0xa0
[   44.644659] lr : bpf_trampoline_update.constprop.0+0x428/0x4a0
[   44.646118] sp : ffff80000803b9f0
[   44.646950] x29: ffff80000803b9f0 x28: ffff0b5d80364400 x27: ffff80000803bb48
[   44.648721] x26: ffff8000085ad000 x25: ffff0b5d809d2400 x24: 0000000000000000
[   44.650493] x23: 00000000ffffffed x22: ffff0b5dd7ea0900 x21: 0000000000000000
[   44.652279] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff
[   44.654067] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff
[   44.655787] x14: ffff0b5d809d2498 x13: ffff0b5d809d2432 x12: 0000000005f5e100
[   44.657535] x11: abcc77118461cefd x10: 000000000000005f x9 : ffffa7219cb5b190
[   44.659254] x8 : ffffa7219c8e0000 x7 : 0000000000000000 x6 : ffffa7219db075e0
[   44.661066] x5 : ffffa7219d3130e0 x4 : ffffa7219cab9da0 x3 : 0000000000000000
[   44.662837] x2 : 0000000000000000 x1 : ffffa7219cb7a5c0 x0 : 0000000000000000
[   44.664675] Call trace:
[   44.665274]  ftrace_set_filter_ip+0x24/0xa0
[   44.666327]  bpf_trampoline_update.constprop.0+0x428/0x4a0
[   44.667696]  __bpf_trampoline_link_prog+0xcc/0x1c0
[   44.668834]  bpf_trampoline_link_prog+0x40/0x64
[   44.669919]  bpf_tracing_prog_attach+0x120/0x490
[   44.671011]  link_create+0xe0/0x2b0
[   44.671869]  __sys_bpf+0x484/0xd30
[   44.672706]  __arm64_sys_bpf+0x30/0x40
[   44.673678]  invoke_syscall+0x78/0x100
[   44.674623]  el0_svc_common.constprop.0+0x4c/0xf4
[   44.675783]  do_el0_svc+0x38/0x4c
[   44.676624]  el0_svc+0x34/0x100
[   44.677429]  el0t_64_sync_handler+0x11c/0x150
[   44.678532]  el0t_64_sync+0x190/0x194
[   44.679439] Code: 2a0203f4 f90013f5 2a0303f5 f9001fe1 (f9400800)
[   44.680959] ---[ end trace 0000000000000000 ]---
[   44.682111] Kernel panic - not syncing: Oops: Fatal exception
[   44.683488] SMP: stopping secondary CPUs
[   44.684551] Kernel Offset: 0x2721948e0000 from 0xffff800008000000
[   44.686095] PHYS_OFFSET: 0xfffff4a380000000
[   44.687144] CPU features: 0x010,00022811,19001080
[   44.688308] Memory Limit: none
[   44.689082] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]---

It's caused by a NULL tr->fops passed to ftrace_set_filter_ip(). tr->fops
is initialized to NULL and is assigned to an allocated memory address if
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is enabled. Since there is no
direct call on arm64 yet, the config can't be enabled.

To fix it, call ftrace_set_filter_ip() only if tr->fops is not NULL.

Fixes: 00963a2e ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Bruno Goncalves <bgoncalv@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220728114048.3540461-1-xukuohai@huaweicloud.com

When multiple threads are attaching/detaching fentry/fexit programs to
the same trampoline, we may call register_fentry on the same trampoline
twice: register_fentry(), unregister_fentry(), then register_fentry again.
This causes ftrace_set_filter_ip() for the same ip on tr->fops twice,
which leaves duplicated ip in tr->fops. The extra ip is not cleaned up
properly on unregister and thus causes failures with further register in
register_ftrace_direct_multi():

register_ftrace_direct_multi()
{
        ...
        for (i = 0; i < size; i++) {
                hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
                        if (ftrace_find_rec_direct(entry->ip))
                                goto out_unlock;
                }
        }
        ...
}

This can be triggered with parallel fentry/fexit tests with test_progs:

  ./test_progs -t fentry,fexit -j

Fix this by resetting tr->fops in ftrace_set_filter_ip(), so that there
will never be duplicated entries in tr->fops.

Fixes: 00963a2e ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729194106.1207472-1-song@kernel.org

The send_signal/send_signal_tracepoint is pretty flaky, with at least
one failure in every ten runs on a few attempts I've tried it:
  > test_send_signal_common:PASS:pipe_c2p 0 nsec
  > test_send_signal_common:PASS:pipe_p2c 0 nsec
  > test_send_signal_common:PASS:fork 0 nsec
  > test_send_signal_common:PASS:skel_open_and_load 0 nsec
  > test_send_signal_common:PASS:skel_attach 0 nsec
  > test_send_signal_common:PASS:pipe_read 0 nsec
  > test_send_signal_common:PASS:pipe_write 0 nsec
  > test_send_signal_common:PASS:reading pipe 0 nsec
  > test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
  > test_send_signal_common:FAIL:incorrect result unexpected incorrect result: actual 48 != expected 50
  > test_send_signal_common:PASS:pipe_write 0 nsec
  > #139/1   send_signal/send_signal_tracepoint:FAIL

The reason does not appear to be a correctness issue in the strict
sense. Rather, we merely do not receive the signal we are waiting for
within the provided timeout.
Let's bump the timeout by a factor of ten. With that change I have not
been able to reproduce the failure in 150+ iterations. I am also sneaking
in a small simplification to the test_progs test selection logic.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220727182955.4044988-1-deso@posteo.net

A skeleton generated by bpftool previously contained a return followed
by an expression in OBJ_NAME__detach(), which has return type void. This
did not hurt, the bpf_object__detach_skeleton() called there returns
void itself anyway, but led to a warning when compiling with e.g.
-pedantic.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220726133203.514087-1-jthinz@mailbox.tu-berlin.de

Use the ARRAY_SIZE macro and make the code more compact.
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220726093045.3374026-1-clementwei90@163.com

vsnprintf returns the number of characters which would have been written if
enough space had been available, excluding the terminating null byte. Thus,
the return value of 'len_left' means that the last character has been
dropped.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220711211317.GA1143610@laptop

ath.git patches for v5.20. Major changes:

ath11k:

* fix WCN9074 to work again

* revert rfkill support as it was causing problems

The function alloc_workqueue() in rtw_core_init() can fail, but
there is no check of its return value. To fix this bug, its return value
should be checked with new error handling code.

Fixes: fe101716 ("rtw88: replace tx tasklet with work queue")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220723063756.2956189-1-williamsukatube@163.com

SER (system error recovery) L1 (level 1) has a step-by-step handshake
process with FW. These handshakes still rely on B_AX_HS0ISR_IND_INT_EN.
So, even already during recovery, we enable this bit in IMR.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220721074952.19676-1-pkshih@realtek.com

Update to internal tag HALRF_027_00_060.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220622091937.11325-1-pkshih@realtek.com

Add in the ability to easily find the firmware feature bits reported in the
get feature exchange without having to compile-in debug prints.

root@linaro-alip:~# cat /sys/kernel/debug/ieee80211/phy0/wcn36xx/firmware_feat_caps
MCC
P2P
DOT11AC
SLM_SESSIONIZATION
DOT11AC_OPMODE
SAP32STA
TDLS
P2P_GO_NOA_DECOUPLE_INIT_SCAN
WLANACTIVE_OFFLOAD
BEACON_OFFLOAD
SCAN_OFFLOAD
BCN_MISS_OFFLOAD
STA_POWERSAVE
STA_ADVANCED_PWRSAVE
BCN_FILTER
RTT
RATECTRL
WOW
WLAN_ROAM_SCAN_OFFLOAD
SPECULATIVE_PS_POLL
IBSS_HEARTBEAT_OFFLOAD
WLAN_SCAN_OFFLOAD
WLAN_PERIODIC_TX_PTRN
ADVANCE_TDLS
BATCH_SCAN
FW_IN_TX_PATH
EXTENDED_NSOFFLOAD_SLOT
CH_SWITCH_V1
HT40_OBSS_SCAN
UPDATE_CHANNEL_LIST
WLAN_MCADDR_FLT
WLAN_CH144
TDLS_SCAN_COEXISTENCE
LINK_LAYER_STATS_MEAS
MU_MIMO
EXTENDED_SCAN
DYNAMIC_WMM_PS
MAC_SPOOFED_SCAN
FW_STATS
WPS_PRBRSP_TMPL
BCN_IE_FLT_DELTA
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-5-bryan.odonoghue@linaro.org

Move wcn36xx_get_cap_name() function in main.c into firmware.c as
wcn36xx_firmware_get_cap_name().
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-4-bryan.odonoghue@linaro.org

The naming of the get/set/clear firmware feature capability bits doesn't
really follow the established namespace pattern of
wcn36xx_logicalblock_do_something();

The feature bits are accessed by smd.c and main.c. It would be nice to
display the found feature bits in debugfs. To do so though we should tidy
up the namespace a bit.

Move the firmware feature exchange API to its own file - firmware.c giving
us the opportunity to functionally decompose other firmware related
accessors as appropriate in future.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-3-bryan.odonoghue@linaro.org

The enum name "place_holder_in_cap_bitmap" is self descriptively asking to
be changed to something else.

Rename place_holder_in_cap_bitmap to wcn36xx_firmware_feat_caps so that the
contents and intent of the enum is obvious.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-2-bryan.odonoghue@linaro.org