- 29 Jul, 2022 16 commits
-
-
Thomas Zimmermann authored
Each model's specific code is located in a separate file. The type field in struct mga_device is no unused. Remove it. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Jocelyn Falempe <jfalempe@redhat.com> Tested-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-15-tzimmermann@suse.de
-
Thomas Zimmermann authored
The CRTC atomic_enable helper contains per-model branches for G200ER, G200EV and G200SE devices. Implement a dedicated helper for each of them and remove the branches from the shared helper. Signed-off-by:
-
Thomas Zimmermann authored
Move the mode-config code into model-specific code and call the plane/CRTC helpers as needed. This will help with providing per- model implementations of individual helpers. Duplication of the pipeline init function is accepted. Some macros simplify this for shared helpers. v3: * clean up style Signed-off-by:
-
Thomas Zimmermann authored
Move the PIXPLLC code into per-model source files and wire it up with per-model callbacks. No functional changes. The PIXPLLC pixel-clock is part of the CRTC, but really separate hardware that varies with each model of the G200. Move the PIXPLLC code for each model into the per-model source file and call it from CRTC helpers via device functions. This allows to remove struct mgag200_pll and the related code. The new callbacks behave like the CRTC's atomic_check and atomic_enable functions. v3: * clean up style Signed-off-by:
-
Thomas Zimmermann authored
Move the BMC-related code into its own file and wire it up with device callbacks. While programming a new display mode, G200EW3 and G200WB have to de- synchronize with the BMC. Synchronization is done via VIDRST pins and controlled via VRSTEN and HRSTEN bits. Move the BMC code behind a serviceable interface and call it from the CRTC's enable and disable functions. Signed-off-by:
-
Thomas Zimmermann authored
While currently empty, the device callbacks will allow mgag200's modesetting code to interact with the BMC and PIXPLLC. Signed-off-by:
-
Thomas Zimmermann authored
The SCROFF bit controls reading the primary plane's scanout buffer from video memory. Set it from primary-plane code, instead of CRTC code. v3: * only flip SCROFF when enabling/disabling the plane (Jocelyn) Signed-off-by:
-
Thomas Zimmermann authored
Drop simple-KMS in favor of regular atomic helpers. Makes the code more modular and hence better to adapt to per-model requirements. The simple-KMS helpers provide few extra features, so the patch is mostly about open-coding what simple-KMS does. The simple-KMS helpers do mix up plane and CRTC state. Changing to regular atomic helpers requires to split some of the simple-pipe functions into per-plane and per-CRTC code No functional changes. v3: * always run drm_atomic_helper_check_plane_state() * clean up style Signed-off-by:
-
Thomas Zimmermann authored
Move around some modesetting code before dropping simple-KMS helpers. Makes the next patch more readable. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Store the primary plane's color format in the CRTC state and use it for programming the CRTC's gamma LUTs. Gamma tables (i.e., color management) are provided by the CRTC, but depend in the primary plane's color format. Store the format in the CRTC state and use it. This has not been an issue with simple-KMS helpers, which mix-up plane and CRTC state to some extent. For using regular atomic helpers, it's necessary to distinguish between the two. Signed-off-by:
-
Thomas Zimmermann authored
Hold I/O-register lock in atomic_commit_tail to protect all pipeline updates at once. Protects against concurrent I/O access in get-modes helper. Complex modesetting operations involve mode changes, plane updates and possibly BMC updates. Make all this atomic wrt to reading display modes via EDID. It's not so much an issue with simple-KMS helpers, but will become necessary for using regular atomic helpers. v4: * remove empty line Signed-off-by:
-
Thomas Zimmermann authored
The register initialization code contains special cases for G200ER and G200EW3 hardware. Move this to per-model code. Signed-off-by:
-
Thomas Zimmermann authored
Provide an init function for each model's DAC registers. Remove the shared helper. The code for initializing the DAC registers consisted of a large table of default value, plus many exceptions for the various G200 models. Providing a per-model implementation makes if more readable. At some point, some of the initialization should probably move into the modesetting code. v2: * don't duplicate DAC values unnecessarily (Sam, Jocelyn) Signed-off-by:
-
Thomas Zimmermann authored
Split mgag200_modeset_init() into smaller helpers to initialize the mode_config structure and the pipeline. This will be helpful for transforming this code into per-model functions. No functional changes. Signed-off-by:
-
Maíra Canal authored
The igt_check_drm_format_min_pitch() function had a lot of KUNIT_EXPECT_* calls, all of which ended up allocating and initializing various test assertion structures on the stack. This behavior was producing -Wframe-larger-than warnings on PowerPC, i386, and MIPS architectures, such as: drivers/gpu/drm/tests/drm_format_test.c: In function 'igt_check_drm_format_min_pitch': drivers/gpu/drm/tests/drm_format_test.c:271:1: error: the frame size of 3712 bytes is larger than 2048 bytes So, the igt_check_drm_format_min_pitch() test case was split into three smaller functions: one testing single plane formats, one testing multi-planar formats, and the other testing tiled formats. Fixes: 0421bb0b ("drm: selftest: convert drm_format selftest to KUnit") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Tested-by:
André Almeida <andrealmeid@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220729124726.748221-1-mairacanal@riseup.net
-
Simon Ser authored
drm_dp_dpcd_read returns the number of bytes read. The previous code would print garbage on DPCD error, and would exit with on error on success. Signed-off-by:
Simon Ser <contact@emersion.fr> Fixes: cb897542 ("drm/dp_mst: Fix W=1 warnings") Cc: Lyude Paul <lyude@redhat.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/473500/
-
- 28 Jul, 2022 14 commits
-
-
José Expósito authored
Extend the existing test cases to test the conversion from XRGB8888 to RGB565. The documentation and the color picker available on [1] are useful resources to understand this patch and validate the values returned by the conversion function. Tested-by:
Tales L. Aparecida <tales.aparecida@gmail.com> Acked-by:
David Gow <davidgow@google.com> Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Link: http://www.barth-dev.de/online/rgb565-color-picker/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-5-jose.exposito89@gmail.com
-
José Expósito authored
In order to support multiple destination format conversions, store the destination pitch and the expected result in its own structure. Tested-by:
-
José Expósito authored
The tests available at the moment only check the conversion from XRGB8888 to RGB332. However, more conversions will be tested in the future. In order to make the struct and functions present in the tests more generic, rename xrgb8888_to_rgb332_* to convert_xrgb8888_*. Tested-by:
-
José Expósito authored
The tests fail on big endian architectures, like PowerPC: $ ./tools/testing/kunit/kunit.py run \ --kunitconfig=drivers/gpu/drm/tests \ --arch=powerpc --cross_compile=powerpc64-linux-gnu- Transform the XRGB8888 buffer from little endian to the CPU endian before calling the conversion function to avoid this error. Fixes: 8f456104 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb332()") Reported-by:
-
Danilo Krummrich authored
All IDRs in the DRM core and drivers which are applicable for using idr_init_base() over idr_init() should be set up to use a proper base in order to avoid unnecessary tree walks. Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220701190227.284783-3-dakr@redhat.com
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
- 27 Jul, 2022 4 commits
-
-
Daniel Vetter authored
No driver access this anymore, except for the olpc dcon fbdev driver but that has been marked as broken anyways by commit de0952f2 ("staging: olpc_dcon: mark driver as broken"). Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Marek Vasut authored
Add support for Densitron DMT028VGHMCMI-1A TFT matrix into this driver. This is a DSI-attached 480x640 2.83 inch panel. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-2-marex@denx.de
-
Marek Vasut authored
Add compatible string for Densitron DMT028VGHMCMI-1A TFT matrix. This is a DSI-attached 480x640 2.83 inch panel. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Slark Xiao authored
Replace 'the the' with 'the' in the comment. Signed-off-by:
Slark Xiao <slark_xiao@163.com> Signed-off-by:
-
- 26 Jul, 2022 6 commits
-
-
Thomas Zimmermann authored
Replace the driver's own function with drm_plane_helper_destroy(). No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace the driver's own function with drm_plane_helper_destroy(). No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Export the individual plane helpers that make up the plane functions and align the naming with other helpers. The plane helpers are for non-atomic modesetting and exporting them will simplify a later conversion of drivers to atomic modesetting. With struct drm_plane_funcs removed from drm_plane_helper.h, also remove the include statements. It only needs linux/types.h for uint32_t and a number of forward declarations. Signed-off-by:
-
Thomas Zimmermann authored
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by:
-
Thomas Zimmermann authored
Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant is not really a helper, but rather a characteristic of the plane itself. Signed-off-by:
-
Thomas Zimmermann authored
The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of DRM includes the latter header file for using this macro. Move the macro and remove the include statements. Signed-off-by:
-
