- 23 Jul, 2019 25 commits
-
-
Chao Yu authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit 22d61e28 ] As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203227 - Overview When mounting the attached crafted image, following errors are reported. Additionally, it hangs on sync after trying to mount it. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces mkdir test mount -t f2fs tmp.img test sync - Messages kernel BUG at fs/f2fs/recovery.c:549! RIP: 0010:recover_data+0x167a/0x1780 Call Trace: f2fs_recover_fsync_data+0x613/0x710 f2fs_fill_super+0x1043/0x1aa0 mount_bdev+0x16d/0x1a0 mount_fs+0x4a/0x170 vfs_kern_mount+0x5d/0x100 do_mount+0x200/0xcf0 ksys_mount+0x79/0xc0 __x64_sys_mount+0x1c/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 During recovery, if ofs_of_node is inconsistent in between recovered node page and original checkpointed node page, let's just fail recovery instead of making kernel panic. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Miroslav Lichvar authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit fdc6bae9 ] The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock. It is typically set by NTP/PTP implementations and it is automatically updated by the kernel on leap seconds. The initial value is zero (which applications may interpret as unknown), but this value cannot be set by adjtimex. This limitation seems to go back to the original "nanokernel" implementation by David Mills. Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in order to allow setting it back to the initial value. Fixes: 153b5d05 ("ntp: support for TAI") Suggested-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.comSigned-off-by:
-
Matt Redfearn authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit 67793bd3 ] The driver currently sets register 0xfb (Low Refresh Rate) based on the value of mode->vrefresh. Firstly, this field is specified to be in Hz, but the magic numbers used by the code are Hz * 1000. This essentially leads to the low refresh rate always being set to 0x01, since the vrefresh value will always be less than 24000. Fix the magic numbers to be in Hz. Secondly, according to the comment in drm_modes.h, the field is not supposed to be used in a functional way anyway. Instead, use the helper function drm_mode_vrefresh(). Fixes: 9c8af882 ("drm: Add adv7511 encoder driver") Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Matt Redfearn <matt.redfearn@thinci.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.comSigned-off-by:
-
Stephane Eranian authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit c7a28657 ] This patch fixes a restriction/bug introduced by: 583feb08 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") The original patch prevented using multi-entry PEBS when wakeup_events != 0. However given that wakeup_events is part of a union with wakeup_watermark, it means that in watermark mode, PEBS multi-entry is also disabled which is not the intent. This patch fixes this by checking is watermark mode is enabled. Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Cc: kan.liang@intel.com Cc: vincent.weaver@maine.edu Fixes: 583feb08 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") Link: http://lkml.kernel.org/r/20190514003400.224340-1-eranian@google.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Tony Lindgren authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit 48171d0e ] I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: twl6040 0-004b: Failed to write 2d = 19: -121 And then any following register access will produce errors. There 2d offset above is register ACCCTL that gets written on twl6040 powerup. With error checking added to the related regcache_sync() call, the -EREMOTEIO error is reproducable on twl6040 powerup at least duovero. To fix the error, we need to wait until twl6040 is accessible after the powerup. Based on tests on omap4 duovero, we need to wait over 8ms after powerup before register write will complete without failures. Let's also make sure we warn about possible errors too. Note that we have twl6040_patch[] reg_sequence with the ACCCTL register configuration and regcache_sync() will write the new value to ACCCTL. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Binbin Wu authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit dad06532 ] In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by:
Binbin Wu <binbin.wu@intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Cyrill Gorcunov authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit a9e73998 ] While validating new map we require the @start_data to be strictly less than @end_data, which is fine for regular applications (this is why this nit didn't trigger for that long). These members are set from executable loaders such as elf handers, still it is pretty valid to have a loadable data section with zero size in file, in such case the start_data is equal to end_data once kernel loader finishes. As a result when we're trying to restore such programs the procedure fails and the kernel returns -EINVAL. From the image dump of a program: | "mm_start_code": "0x400000", | "mm_end_code": "0x8f5fb4", | "mm_start_data": "0xf1bfb0", | "mm_end_data": "0xf1bfb0", Thus we need to change validate_prctl_map from strictly less to less or equal operator use. Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan Fixes: f606b77f ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation") Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Cc: Andrey Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yue Hu authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit f0fd5050 ] If not find zero bit in find_next_zero_bit(), it will return the size parameter passed in, so the start bit should be compared with bitmap_maxno rather than cma->count. Although getting maxchunk is working fine due to zero value of order_per_bit currently, the operation will be stuck if order_per_bit is set as non-zero. Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.comSigned-off-by:
Yue Hu <huyue2@yulong.com> Reviewed-by:
-
Yue Hu authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit 1df3a339 ] f022d8cb ("mm: cma: Don't crash on allocation if CMA area can't be activated") fixes the crash issue when activation fails via setting cma->count as 0, same logic exists if bitmap allocation fails. Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Mike Kravetz authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit 0919e1b6 ] When a huge page is allocated, PagePrivate() is set if the allocation consumed a reservation. When freeing a huge page, PagePrivate is checked. If set, it indicates the reservation should be restored. PagePrivate being set at free huge page time mostly happens on error paths. When huge page reservations are created, a check is made to determine if the mapping is associated with an explicitly mounted filesystem. If so, pages are also reserved within the filesystem. The default action when freeing a huge page is to decrement the usage count in any associated explicitly mounted filesystem. However, if the reservation is to be restored the reservation/use count within the filesystem should not be decrementd. Otherwise, a subsequent page allocation and free for the same mapping location will cause the file filesystem usage to go 'negative'. Filesystem Size Used Avail Use% Mounted on nodev 4.0G -4.0M 4.1G - /opt/hugepool To fix, when freeing a huge page do not adjust filesystem usage if PagePrivate() is set to indicate the reservation should be restored. I did not cc stable as the problem has been around since reserves were added to hugetlbfs and nobody has noticed. Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Li Rongqing authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit d6a2946a ] msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is enabled on large memory SMP systems, the pages initialization can take a long time, if msgctl10 requests a huge block memory, and it will block rcu scheduler, so release cpu actively. After adding schedule() in free_msg, free_msg can not be called when holding spinlock, so adding msg to a tmp list, and free it out of spinlock rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505 rcu: Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978 rcu: (detected by 11, t=35024 jiffies, g=44237529, q=16542267) msgctl10 R running task 21608 32505 2794 0x00000082 Call Trace: preempt_schedule_irq+0x4c/0xb0 retint_kernel+0x1b/0x2d RIP: 0010:__is_insn_slot_addr+0xfb/0x250 Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48 RSP: 0018:ffff88bce041f758 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: dffffc0000000000 RBX: ffffffff8471bc50 RCX: ffffffff828a2a57 RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88bce041f780 RBP: ffff88bce041f828 R08: ffffed15f3f4c5b3 R09: ffffed15f3f4c5b3 R10: 0000000000000001 R11: ffffed15f3f4c5b2 R12: 000000318aee9b73 R13: ffffffff8471bc50 R14: 1ffff1179c083ef0 R15: 1ffff1179c083eec kernel_text_address+0xc1/0x100 __kernel_text_address+0xe/0x30 unwind_get_return_address+0x2f/0x50 __save_stack_trace+0x92/0x100 create_object+0x380/0x650 __kmalloc+0x14c/0x2b0 load_msg+0x38/0x1a0 do_msgsnd+0x19e/0xcf0 do_syscall_64+0x117/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170 rcu: (detected by 14, t=35016 jiffies, g=44237525, q=12423063) msgctl10 R running task 21608 32170 32155 0x00000082 Call Trace: preempt_schedule_irq+0x4c/0xb0 retint_kernel+0x1b/0x2d RIP: 0010:lock_acquire+0x4d/0x340 Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82 RSP: 0018:ffff88af83417738 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: dffffc0000000000 RBX: ffff88bd335f3080 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88bd335f3d64 RBP: ffff88af83417758 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed13f3f745b2 R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 is_bpf_text_address+0x32/0xe0 kernel_text_address+0xec/0x100 __kernel_text_address+0xe/0x30 unwind_get_return_address+0x2f/0x50 __save_stack_trace+0x92/0x100 save_stack+0x32/0xb0 __kasan_slab_free+0x130/0x180 kfree+0xfa/0x2d0 free_msg+0x24/0x50 do_msgrcv+0x508/0xe60 do_syscall_64+0x117/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe Davidlohr said: "So after releasing the lock, the msg rbtree/list is empty and new calls will not see those in the newly populated tmp_msg list, and therefore they cannot access the delayed msg freeing pointers, which is good. Also the fact that the node_cache is now freed before the actual messages seems to be harmless as this is wanted for msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the info->lock the thing is freed anyway so it should not change things" Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.comSigned-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Reviewed-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Christian Brauner authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit e260ad01 ] Currently when userspace gives us a values that overflow e.g. file-max and other callers of __do_proc_doulongvec_minmax() we simply ignore the new value and leave the current value untouched. This can be problematic as it gives the illusion that the limit has indeed be bumped when in fact it failed. This commit makes sure to return EINVAL when an overflow is detected. Please note that this is a userspace facing change. Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.ioSigned-off-by:
Christian Brauner <christian@brauner.io> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by:
-
Hou Tao authored
BugLink: https://bugs.launchpad.net/bugs/1836666 [ Upstream commit bd8309de ] fsync() needs to make sure the data & meta-data of file are persistent after the return of fsync(), even when a power-failure occurs later. In the case of fat-fs, the FAT belongs to the meta-data of file, so we need to issue a flush after the writeback of FAT instead before. Also bail out early when any stage of fsync fails. Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.comSigned-off-by:
Hou Tao <houtao1@huawei.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Gen Zhang authored
In dlpar_parse_cc_property(), 'prop->name' is allocated by kstrdup(). kstrdup() may return NULL, so it should be checked and handle error. And prop should be freed if 'prop->name' is NULL. Signed-off-by:
Gen Zhang <blackgod016574@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> CVE-2019-12614 (cherry picked from commit efa9ace6) Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
-
Guilherme G. Piccoli authored
BugLink: https://bugs.launchpad.net/bugs/1832082 Currently bnx2x ptp worker tries to read a register with timestamp information in case of TX packet timestamping and in case it fails, the routine reschedules itself indefinitely. This was reported as a kworker always at 100% of CPU usage, which was narrowed down to be bnx2x ptp_task. By following the ioctl handler, we could narrow down the problem to an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with RX filter zeroed; this isn't reproducible for example with ptp4l (from linuxptp) since this tool requests a supported RX filter. It seems NIC FW timestamp mechanism cannot work well with RX_FILTER_NONE - driver's PTP filter init routine skips a register write to the adapter if there's not a supported filter request. This patch addresses the problem of bnx2x ptp thread's everlasting reschedule by retrying the register read 10 times; between the read attempts the thread sleeps for an increasing amount of time starting in 1ms to give FW some time to perform the timestamping. If it still fails after all retries, we bail out in order to prevent an unbound resource consumption from bnx2x. The patch also adds an ethtool statistic for accounting the skipped TX timestamp packets and it reduces the priority of timestamping error messages to prevent log flooding. The code was tested using both linuxptp and chrony. Reported-and-tested-by:
Przemyslaw Hausman <przemyslaw.hausman@canonical.com> Suggested-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by:
David S. Miller <davem@davemloft.net> (backported from commit 3c91f25c linux-net) [gpiccoli: - context adjustment; - used old "STATS_FLAGS_FUNC" instead of bool in bnx2x_stats_arr(); - used pr_err_once() instead of netdev_err_once() due to the lack of the latter in v4.4;] Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1836665Signed-off-by:
-
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1836585 This reverts commit 54cba3ec. Commit "UBUNTU: SAUCE: perf/bench: Drop definition of BIT in numa.c" is causing build failures on tools/perf/bench after stable upstream commit "perf tools: No need to include bitops.h in util.h" removed the inclusion of the header file where the BIT() macro is defined. This causes perf build failures when libnuma is installed. Signed-off-by:
-
Takashi Iwai authored
A few places in mwifiex_uap_parse_tail_ies() perform memcpy() unconditionally, which may lead to either buffer overflow or read over boundary. This patch addresses the issues by checking the read size and the destination size at each place more properly. Along with the fixes, the patch cleans up the code slightly by introducing a temporary variable for the token size, and unifies the error path with the standard goto statement. Reported-by:
huangwen <huangwen@venustech.com.cn> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> CVE-2019-10126 (backported from commit 69ae4f6a) [tyhicks: Backport to Xenial: - There's no need to adjust the WLAN_EID_VENDOR_SPECIFIC case due to missing commit bfc83ea1 ("mwifiex: Fix skipped vendor specific IEs") - Adjust file path due to missing commit 277b024e ("mwifiex: move under marvell vendor directory")] Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Acked-by:
-
Takashi Iwai authored
mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in a couple places without checking the destination size. Since the source is given from user-space, this may trigger a heap buffer overflow. Fix it by putting the length check before performing memcpy(). This fix addresses CVE-2019-3846. Reported-by:
-
Stefan Bader authored
Signed-off-by: -
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1837476Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1837235 This reverts commit d823dfc0 as it seems to be part of a set causing regressions on 32bit.. Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1837235 This reverts commit aceb27a7 as it seems to be part of a set causing regressions on 32bit. Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1837235 This reverts commit a713ff5b as it seems to be part of a set causing regressions on 32bit. Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 17 Jul, 2019 4 commits
-
-
Stefan Bader authored
Signed-off-by: -
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1836880Signed-off-by:
-
Franky Lin authored
BugLink: https:://bugs.launchpad.net/bugs/1836801 A regression was introduced in commit 9c349892 ("brcmfmac: revise handling events in receive path") which moves eth_type_trans() call to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes brcmf_netif_rx() directly. In such case the Ethernet header was not stripped out resulting in null pointer dereference in the networking stack. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: fuse ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype [...] rtsx_pci scsi_mod usbcore usb_common i8042 serio nvme nvme_core CPU: 7 PID: 1340 Comm: irq/136-brcmf_p Not tainted 4.7.0-rc1-mainline #1 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 task: ffff8804a0c5bd00 ti: ffff88049e124000 task.ti: ffff88049e124000 RIP: 0010:[<ffffffff814c3ce6>] [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP: 0018:ffff88049e127ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8804bddd7c40 RCX: 000000000000002f RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8804bddd7d4c RBP: ffff88049e127ce8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8804bddd12c0 R11: 000000000000149e R12: 0000000000017c40 R13: ffff88049e127d08 R14: ffff8804a9bd6d00 R15: ffff8804bddd7d4c FS: 0000000000000000(0000) GS:ffff8804bddc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000048 CR3: 0000000001806000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8804bdddad00 ffff8804ad089e00 0000000000000000 0000000000000282 0000000000000000 ffff8804a9bd6d00 ffff8804a1b27e00 ffff8804a9bd6d00 ffff88002ee88000 ffff88049e127d28 ffffffff814c3f3b ffffffff81311fc3 Call Trace: [<ffffffff814c3f3b>] netif_rx_internal+0x4b/0x170 [<ffffffff81311fc3>] ? swiotlb_tbl_unmap_single+0xf3/0x120 [<ffffffff814c5467>] netif_rx_ni+0x27/0xc0 [<ffffffffa08519e9>] brcmf_netif_rx+0x49/0x70 [brcmfmac] [<ffffffffa08564d4>] brcmf_msgbuf_process_rx+0x2b4/0x570 [brcmfmac] [<ffffffff81020017>] ? __xen_set_pgd_hyper+0x57/0xd0 [<ffffffff810d60b0>] ? irq_forced_thread_fn+0x70/0x70 [<ffffffffa0857381>] brcmf_proto_msgbuf_rx_trigger+0x31/0xe0 [brcmfmac] [<ffffffffa0861e8f>] brcmf_pcie_isr_thread+0x7f/0x110 [brcmfmac] [<ffffffff810d60d0>] irq_thread_fn+0x20/0x50 [<ffffffff810d63ad>] irq_thread+0x12d/0x1c0 [<ffffffff815d07d5>] ? __schedule+0x2f5/0x7a0 [<ffffffff810d61d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff810d6280>] ? irq_thread_dtor+0xb0/0xb0 [<ffffffff81098ea8>] kthread+0xd8/0xf0 [<ffffffff815d4b7f>] ret_from_fork+0x1f/0x40 [<ffffffff81098dd0>] ? kthread_worker_fn+0x170/0x170 Code: 1c f5 60 9a 8e 81 9c 58 0f 1f 44 00 00 48 89 45 d0 fa 66 0f 1f 44 00 00 4c 8d bb 0c 01 00 00 4c 89 ff e8 5e 08 11 00 49 8b 56 20 <48> 8b 52 48 83 e2 01 74 10 8b 8b 08 01 00 00 8b 15 59 c5 42 00 RIP [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP <ffff88049e127ca0> CR2: 0000000000000048 Fixes: 9c349892 ("brcmfmac: revise handling events in receive path") Reported-by:
Rafal Milecki <zajec5@gmail.com> Reported-by:
Grey Christoforo <grey@christoforo.net> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by:
Franky Lin <franky.lin@broadcom.com> [arend@broadcom.com: rephrased the commit message] Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 02 Jul, 2019 3 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1834918Signed-off-by:
-
Kleber Sacilotto de Souza authored
Ignore: yes Signed-off-by:
-
- 01 Jul, 2019 8 commits
-
-
Jiri Benc authored
BugLink: https://bugs.launchpad.net/bugs/1794232 When IPv6 is compiled but disabled at runtime, geneve_sock_add returns -EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole operation of bringing up the tunnel. Ignore failure of IPv6 socket creation for metadata based tunnels caused by IPv6 not being available. This is the same fix as what commit d074bf96 ("vxlan: correctly handle ipv6.disable module parameter") is doing for vxlan. Note there's also commit c0a47e44 ("geneve: should not call rt6_lookup() when ipv6 was disabled") which fixes a similar issue but for regular tunnels, while this patch is needed for metadata based tunnels. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
Nivedita Singhvi <nivedita.singhvi@canonical.com> Acked-by:
-
Daniel Dadap authored
BugLink: https://bugs.launchpad.net/bugs/1828084 recordmcount.pl uses a set of regular expressions to parse the output of objdump(1). However, if objdump(1) output is localized, it may not match the regular expressions, thereby preventing recordmcount.pl from parsing object files correctly. In order to allow recordmcount.pl to function correctly regardless of the current locale settings, set LANG=C when running objdump(1). LC_ALL is already unset in the top-level Makefile, so it is not necessary to also override that environment variable. Signed-off-by:
Daniel Dadap <ddadap@nvidia.com> Reviewed-by:
Robert Morell <rmorell@nvidia.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> (cherry picked from commit e46b94d2) Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
-
Christian Brauner authored
BugLink: https://bugs.launchpad.net/bugs/1833935 proc_get_long() is a funny function. It uses simple_strtoul() and for a good reason. proc_get_long() wants to always succeed the parse and return the maybe incorrect value and the trailing characters to check against a pre-defined list of acceptable trailing values. However, simple_strtoul() explicitly ignores overflows which can cause funny things like the following to happen: echo 18446744073709551616 > /proc/sys/fs/file-max cat /proc/sys/fs/file-max 0 (Which will cause your system to silently die behind your back.) On the other hand kstrtoul() does do overflow detection but does not return the trailing characters, and also fails the parse when anything other than '\n' is a trailing character whereas proc_get_long() wants to be more lenient. Now, before adding another kstrtoul() function let's simply add a static parse strtoul_lenient() which: - fails on overflow with -ERANGE - returns the trailing characters to the caller The reason why we should fail on ERANGE is that we already do a partial fail on overflow right now. Namely, when the TMPBUFLEN is exceeded. So we already reject values such as 184467440737095516160 (21 chars) but accept values such as 18446744073709551616 (20 chars) but both are overflows. So we should just always reject 64bit overflows and not special-case this based on the number of chars. Link: http://lkml.kernel.org/r/20190107222700.15954-2-christian@brauner.ioSigned-off-by:
Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1832661Signed-off-by:
-
Yunsheng Lin authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit f9fc54d3 upstream. The return type for get_regs_len in struct ethtool_ops is int, the hns3 driver may return error when failing to get the regs len by sending cmd to firmware. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
David Ahern authored
BugLink: https://bugs.launchpad.net/bugs/1832661 commit 9b3040a6 upstream. Define __ipv4_neigh_lookup_noref to return NULL when CONFIG_INET is disabled. Fixes: 4b2a2bfe ("neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Kirill Smelkov authoredBugLink: https://bugs.launchpad.net/bugs/1832661 commit bbd84f33 upstream. Starting from commit 9c225f26 ("vfs: atomic f_pos accesses as per POSIX") files opened even via nonseekable_open gate read and write via lock and do not allow them to be run simultaneously. This can create read vs write deadlock if a filesystem is trying to implement a socket-like file which is intended to be simultaneously used for both read and write from filesystem client. See commit 10dce8af ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") for details and e.g. commit 581d21a2 ("xenbus: fix deadlock on writes to /proc/xen/xenbus") for a similar deadlock example on /proc/xen/xenbus. To avoid such deadlock it was tempting to adjust fuse_finish_open to use stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE, and in particular GVFS which actually uses offset in its read and write handlers https://codesearch.debian.net/search?q=-%3Enonseekable+%3D https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481 so if we would do such a change it will break a real user. Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the opened handler is having stream-like semantics; does not use file position and thus the kernel is free to issue simultaneous read and write request on opened file handle. This patch together with stream_open() should be added to stable kernels starting from v3.14+. This will allow to patch OSSPD and other FUSE filesystems that provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all kernel versions. This should work because fuse_finish_open ignores unknown open flags returned from a filesystem and so passing FOPEN_STREAM to a kernel that is not aware of this flag cannot hurt. In turn the kernel that is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE is sufficient to implement streams without read vs write deadlock. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by:
Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Kirill Smelkov authored
fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock BugLink: https://bugs.launchpad.net/bugs/1832661 commit 10dce8af upstream. Commit 9c225f26 ("vfs: atomic f_pos accesses as per POSIX") added locking for file.f_pos access and in particular made concurrent read and write not possible - now both those functions take f_pos lock for the whole run, and so if e.g. a read is blocked waiting for data, write will deadlock waiting for that read to complete. This caused regression for stream-like files where previously read and write could run simultaneously, but after that patch could not do so anymore. See e.g. commit 581d21a2 ("xenbus: fix deadlock on writes to /proc/xen/xenbus") which fixes such regression for particular case of /proc/xen/xenbus. The patch that added f_pos lock in 2014 did so to guarantee POSIX thread safety for read/write/lseek and added the locking to file descriptors of all regular files. In 2014 that thread-safety problem was not new as it was already discussed earlier in 2006. However even though 2006'th version of Linus's patch was adding f_pos locking "only for files that are marked seekable with FMODE_LSEEK (thus avoiding the stream-like objects like pipes and sockets)", the 2014 version - the one that actually made it into the tree as 9c225f26 - is doing so irregardless of whether a file is seekable or not. See https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/ https://lwn.net/Articles/180387 https://lwn.net/Articles/180396 for historic context. The reason that it did so is, probably, that there are many files that are marked non-seekable, but e.g. their read implementation actually depends on knowing current position to correctly handle the read. Some examples: kernel/power/user.c snapshot_read fs/debugfs/file.c u32_array_read fs/fuse/control.c fuse_conn_waiting_read + ... drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read arch/s390/hypfs/inode.c hypfs_read_iter ... Despite that, many nonseekable_open users implement read and write with pure stream semantics - they don't depend on passed ppos at all. And for those cases where read could wait for something inside, it creates a situation similar to xenbus - the write could be never made to go until read is done, and read is waiting for some, potentially external, event, for potentially unbounded time -> deadlock. Besides xenbus, there are 14 such places in the kernel that I've found with semantic patch (see below): drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write() drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write() drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write() drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write() net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write() drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write() drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write() drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write() net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write() drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write() drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write() drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write() drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write() drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write() In addition to the cases above another regression caused by f_pos locking is that now FUSE filesystems that implement open with FOPEN_NONSEEKABLE flag, can no longer implement bidirectional stream-like files - for the same reason as above e.g. read can deadlock write locking on file.f_pos in the kernel. FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990 ("fuse: implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and write routines not depending on current position at all, and with both read and write being potentially blocking operations: See https://github.com/libfuse/osspd https://lwn.net/Articles/308445 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510 Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as "somewhat pipe-like files ..." with read handler not using offset. However that test implements only read without write and cannot exercise the deadlock scenario: https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216 I've actually hit the read vs write deadlock for real while implementing my FUSE filesystem where there is /head/watch file, for which open creates separate bidirectional socket-like stream in between filesystem and its user with both read and write being later performed simultaneously. And there it is semantically not easy to split the stream into two separate read-only and write-only channels: https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169 Let's fix this regression. The plan is: 1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS - doing so would break many in-kernel nonseekable_open users which actually use ppos in read/write handlers. 2. Add stream_open() to kernel to open stream-like non-seekable file descriptors. Read and write on such file descriptors would never use nor change ppos. And with that property on stream-like files read and write will be running without taking f_pos lock - i.e. read and write could be running simultaneously. 3. With semantic patch search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. 4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via steam_open if that bit is present in filesystem open reply. It was tempting to change fs/fuse/ open handler to use stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE, and in particular GVFS which actually uses offset in its read and write handlers https://codesearch.debian.net/search?q=-%3Enonseekable+%3D https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481 so if we would do such a change it will break a real user. 5. Add stream_open and FOPEN_STREAM handling to stable kernels starting from v3.14+ (the kernel where 9c225f26 first appeared). This will allow to patch OSSPD and other FUSE filesystems that provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE in their open handler and this way avoid the deadlock on all kernel versions. This should work because fs/fuse/ ignores unknown open flags returned from a filesystem and so passing FOPEN_STREAM to a kernel that is not aware of this flag cannot hurt. In turn the kernel that is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE is sufficient to implement streams without read vs write deadlock. This patch adds stream_open, converts /proc/xen/xenbus to it and adds semantic patch to automatically locate in-kernel places that are either required to be converted due to read vs write deadlock, or that are just safe to be converted because read and write do not use ppos and there are no other funky methods in file_operations. Regarding semantic patch I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> [ backport to 4.4: actually fixed deadlock on /proc/xen/xenbus as 581d21a2 was not backported to 4.4 ] Signed-off-by:
Kirill Smelkov <kirr@nexedi.com>
Signed-off-by:
-
