- 02 Mar, 2020 18 commits
-
-
Jae Hyun Yoo authored
Video engine in AST2600 has the exactly same register set with AST2500 except VR084 register which provides more precise JPEG size read back. This commit adds support for the difference and adds 'aspeed,ast2600-video-engine' compatible OF string. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
VB2_USERPTR support doesn't make sense for drivers based on vb2_dma_contig, so just drop it. Otherwise, queues using vb2_dma_contig_memops causes v4l2-compliance to fail for VB2_USERPTR mode, due to buffer misalignment. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> [hverkuil-cisco@xs4all.nl: replaced commit log with Helen's suggestion] Signed-off-by:
-
Hans Verkuil authored
Explicitly document that the driver-specific buffer structure must start with the subsystem-specific struct (vb2_v4l2_buffer in the case of V4L2). Signed-off-by:
-
Dafna Hirschfeld authored
The item 'Fix serialization on subdev ops.' was solved, so remove it from the TODO file. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
Remove a spurious 'b' in the "contiguous chunk is too small %lu/%lu b" message. Signed-off-by:
-
Rui Wang authored
VP9 bitstream specification indicate segment data should reset to default when meet key frames, intra only frames or enable error resilience mode. So memset segmentation map buffer before every decode process is not appropriate. Reset segment data only when needed, then start decoder hardware Signed-off-by:
Rui Wang <gtk_ruiwang@mediatek.com> Signed-off-by:
-
Jernej Skrabec authored
Allwinner A64 SoC also contains deinterlace core, compatible to H3. Add compatible string for it. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Takashi Iwai authored
Josef reported that his old-and-good Plextor ConvertX M402U video converter spews lots of WARNINGs on the recent kernels, and it turned out that the device uses a bulk endpoint for interrupt handling just like 2250 board. For fixing it, generalize the check with the proper verification of the endpoint instead of hard-coded board type check. Fixes: 7e5219d1 ("[media] go7007: Fix 2250 urb type") Reported-and-tested-by:
Josef Möllers <josef.moellers@suse.com> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jernej Skrabec authored
Allwinner A83T contains rotation core which can rotate and flip images. Add a driver for it. Signed-off-by:
-
Jernej Skrabec authored
Some Allwinner SoCs like A83T and A64 contain rotate core which can rotate and flip images. Add a binding for it. Signed-off-by:
-
Ezequiel Garcia authored
Currently, v4l2_pipeline_pm_use() prototype is: int v4l2_pipeline_pm_use(struct media_entity *entity, int use) Where the 'use' argument shall only be set to '1' for enable/power-on, or to '0' for disable/power-off. The integer return is specified as only meaningful when 'use' is set to '1'. Let's enforce this semantic by splitting the function in two: v4l2_pipeline_pm_get and v4l2_pipeline_pm_put. This is done for several reasons. It makes the API easier to use (or harder to misuse). It removes the constraint on the values the 'use' argument shall take. Also, it removes the need to constraint the return value, by making v4l2_pipeline_pm_put void return. And last, it's more consistent with other kernel APIs, such as the runtime pm APIs, which makes the code more symmetric. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Hans Verkuil authored
The driver is deprecated and scheduled for removal by the end of 2020. The reason is that this driver is for old and obsolete hardware, and it produces a continuous stream of syzbot errors due to poor code. In order to prevent removal the following actions would have to be taken: - clean up the code - convert to the vb2 framework - fix the disconnect and free-on-last-user handling (i.e., add a release callback for struct v4l2_device and rework the code to use that correctly). Signed-off-by:
-
Jonas Karlman authored
Using the field information attached to v4l2 buffers is not enough to determine the type of field referenced by a DPB entry: the decoded frame might contain the full picture (both top and bottom fields) but the reference only point to one of them. Let's add new V4L2_H264_DPB_ENTRY_FLAG_ flags to express that. [Keep only 2 flags and add some details about they mean] Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Mario Hros authored
Slave demod needs some time to wake up otherwise it may not respond to the following probe commands. This problem manifested randomly on my Astrometa DVB-T2 dongle. Signed-off-by:
Mario Hros <git@reversity.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Mohammad Rasim authored
videostrong kii pro comes with a nec rc, add the keymap to the dts Signed-off-by:
Mohammad Rasim <mohammad.rasim96@gmail.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Mohammad Rasim authored
Add new entry for rc-videostrong-kii-pro in linux,rc-map-name Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 27 Feb, 2020 22 commits
-
-
Kuninori Morimoto authored
The address of VSP2_VI6_HGT_LBx_H are VSP2_VI6_HGT_LB0_H : 0x3428 VSP2_VI6_HGT_LB1_H : 0x3430 VSP2_VI6_HGT_LB2_H : 0x3438 VSP2_VI6_HGT_LB3_H : 0x3440 Thus, VI6_HGT_LBn_H() macro should start from 0x3420 instead of 0x3430. This patch fixes it. Fixes: 26e0ca22 ("[media] v4l: Renesas R-Car VSP1 driver") Reported-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
include/media/i2c/smiapp.h was meant to serve systems where the sensor is enumerated through platform data. That's no longer necessary, hopefully not even in out-of-tree use cases. Move the definitions to the appropriate headers. Signed-off-by:
-
Sakari Ailus authored
Combine the two trivial functions reading limits into one. Also rename smiapp_get_all_limits() as smiapp_read_all_smia_limits(). Signed-off-by:
-
Sakari Ailus authored
Move SMIA limit reading up, where other limit and capability handling takes place. Signed-off-by:
-
Sakari Ailus authored
Instead of direct array access, turn accessing limit information into a function. Going forward, more elaborate CCS limits will replace most SMIA limits, and conversion will be less complicated this way. Signed-off-by:
-
Sakari Ailus authored
Use get_unaligned_be* and put_unaligned_be* functions to convert register values to CPU endianness. Consequently, two instances of BUG() are removed. Signed-off-by:
-
Sakari Ailus authored
Use the only8 boolean to determine whether 8-bit access is required for reading. Signed-off-by:
-
Sakari Ailus authored
Commit ... prevented restarting CCDC through its interrupt handler when it's about to be disabled. It missed to address the case when CCDC might be enabled due to queueing a buffer. Do that now. Fixes: dd12ed17 ("omap3isp: Don't restart CCDC if we're about to stop") Signed-off-by:
-
Andy Shevchenko authored
Run parse-maintainers.pl and choose TI VPE/CAL record. Fix it accordingly. Note, this is urgent fix, without which parse-maintainers.pl throws an exception: Odd non-pattern line ' Documentation/devicetree/bindings/media/ti,cal.yaml ' for 'TI VPE/CAL DRIVERS' at scripts/parse-maintainers.pl line 147, <$file> line 16770. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Jean-Baptiste Jouband authored
This patch fixes the checkpatch.pl warning: WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary Signed-off-by:
Jean-Baptiste Jouband <jj.jouband@gmail.com> Signed-off-by:
-
Dave Stevenson authored
Adds a driver for the 8MPix Sony IMX219 CSI2 sensor. Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver currently only supports 2 lanes. 8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned) @ 30fps are currently supported. [Sakari Ailus: make imx219_check_hwcfg static] Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
-
Andrey Konovalov authored
Add YAML device tree binding for IMX219 CMOS image sensor, and the relevant MAINTAINERS entries. Signed-off-by:
-
Bingbu Cao authored
A specific tool which can be used to generate imgu intermedia resolutions now is public on github, this patch adds this information into ipu3.rst. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Shawn Tu authored
- Add V4L2 controls: horizontal/vertical flip, keep SGRBG10 Bayer order output (via change v/hflip) - Fix Bayer order output in 1296x972 binning registers Signed-off-by:
Shawn Tu <shawnx.tu@intel.com> Signed-off-by:
-
Dikshita Agarwal authored
Add new qcom,sc7180-venus DT binding schema. Reviewed-by:
Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Dikshita Agarwal authored
This add DT compatible string and resource structure for sc7180. Signed-off-by:
-
Stanimir Varbanov authored
After transitioning to YAML DT schema we don't need this old-style document. Acked-by:
-
Stanimir Varbanov authored
In order to use dynamic video codec assignment add a new sdm845-v2 DT compatible and new venus_resource structure to cover the binding where all pmdomains and clocks are under the venus_core control. Signed-off-by:
-
Stanimir Varbanov authored
Add new qcom,sdm845-venus-v2 DT binding schema. Reviewed-by:
-
Stanimir Varbanov authored
Convert qcom,sdm845-venus Venus binding to DT schema. Reviewed-by:
-
Stanimir Varbanov authored
Convert qcom,msm8996-venus Venus binding to DT schema. Reviewed-by:
-
Stanimir Varbanov authored
Convert qcom,msm8916-venus Venus binding to DT schema Reviewed-by:
-
