If we write a DRM mode via debugfs, we shouldn't allow normal operations
to overwrite this DRM mode. This is important if we want to debug
3rd-party devices and we want to see what data is sent on each mode.

If we write NULL/0 as DRM, the lock is removed again so the best matching
DRM is chosen by wiimote core.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

single_open() stores the seq_file pointer in file->private_data. It stores
our ctx pointer in seq_file->private.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add parsers for motion plus data so we can hotplug motion plus extensions
and make use of them. This is mostly the same as the old static motion
plus parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add a new extension module for the classic controller so we get hotplug
support for this device. It is mostly the same as the old static classic
controller parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This moves the nunchuk parser over to an extension module. This allows to
make use of hotplugged Nunchuks instead of the old static parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This adds Nintendo Wii Balance Board support to the new HOTPLUG capable
wiimote core. It is mostly copied from the old extension.

This also adds Balance Board device detection. Whenever we find a device
that supports the balance-board extension, we assume that it is a real
balance board and disable unsupported hardward like accelerometer, IR,
rumble and more.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Wii Remote has several extension ports. The first port (EXT) provides
hotplug events whenever an extension is plugged. The second port (MP)
does not provide hotplug events by default. Instead, we have to map MP
into EXT to get events for it.

This patch introduces hotplug support for extensions. It is fairly
complicated to get this right because the Wii Remote sends a lot of
noise-hotplug events while activating extension ports. We need to filter
the events and only handle the events that are real hotplug events.

Mapping MP into EXT is easy. But if we want both, MP _and_ EXT at the same
time, we need to map MP into EXT and enable a passthrough-mode. This will
then send real EXT events through the mapped MP interleaved with real MP
events. But once MP is mapped, we no longer have access to the real EXT
registers so we need to perform setup _before_ mapping MP. Furthermore, we
no longer can read EXT IDs so we cannot verify if EXT is still the same
extension that we expect it to be.
We deal with this by unmapping MP whenever we got into a situation where
EXT might have changed. We then re-read EXT and MP and remap everything.

The real Wii Console takes a fairly easy approach: It simply reconnects to
the device on hotplug events that it didn't expect. So if a program wants
MP events, but MP is disconnected, it fails and reconnects so it can wait
for MP hotplug events again.
This simplifies hotplugging a lot because we just react on PLUG events and
ignore UNPLUG events.
The more sophisticated Wii applications avoid reconnection (well, they
still reconnect during many weird events, but at least not during UNPLUG)
but they start polling the device. This allows them to disable the device,
poll for the extension ports to settle and then initialize them again.
Unfortunately, this approach fails whenever an extension is replugged
while it is initialized. We would loose UNPLUG events and polling the
device later will give unreliable results because the extension port might
be in some weird state, even though it's actually unplugged.

Our approach is a real HOTPLUG approch. We keep track of the EXT and
mapped MP hotplug events whenever they occur. We then re-evaluate the
device state and initialize any possible new extension or deinitialize any
gone extension. Only during initialization, we set an extension port
ACTIVE. However, during an unplug event we mark them as INACTIVE. This
guarantess that a fast UNPLUG -> PLUG event sequence doesn't keep them
marked as PLUGGED+ACTIVE but only PLUGGED.
To deal with annoying noise-hotplug events during extension mapping, we
simply rescan the device before performing any mapping. This allows us to
ignore all the noise events as long as the device is in the correct state.

Long story short: EXT and MP registers are sparsely known and we need to
jump through hoops to get reliable HOTPLUG working. But while Nintendo
needs *FOUR* Bluetooth reconnections for the shortest imaginable
boot->menu->game->menu->shutdown sequence, we now need *ZERO*.

As always, 3rd party devices tend to break whenever we behave differently
than the original Wii. So there are also devices which _expect_ a
disconnect after UNPLUG. Obviously, these devices won't benefit from this
patch. But all official devices were tested extensively and work great
during any hotplug sequence. Yay!
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

IR is the last piece that still is handled natively. This patch converts
it into a sub-device module like all other sub-devices. It mainly moves
code and doesn't change semantics.

We also implicitly sync IR data on ir_to_input3 now so the explicit
input_sync() calls are no longer needed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Accelerometer data is very similar to KEYS handling. Therefore, convert
all ACCEL related handling into a sub-device module similar to KEYS.

This doesn't change any semantics but only moves code over to
wiimote-modules.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Each of the 4 LEDs may be supported individually by devices. Therefore,
we need one module for each device. To avoid code-duplication, we simply
pass the LED ID as "arg" argument to the module loading code.

This just moves the code over to wiimote-module. The semantics stay the
same as before.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This introduces a new sub-device module for the BATTERY handlers. It
moves the whole power_supply battery handling over to wiimote-modules.

This doesn't change any semantics or ABI but only converts the battery
handling into a sub-device module.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This introduces the first sub-device modules by converting the KEYS and
RUMBLE sub-devices into wiimote modules. Both must be converted at once
because they depend on the built-in shared input device.

This mostly moves code from wiimote-core to wiimote-modules and doesn't
change any semantics or ABI.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

To avoid loading all sub-device drivers for every Wii Remote, even though
the required hardware might not be available, we introduce a module layer.

The module layer specifies which sub-devices are available on each
device-type. After device detection, we only load the modules for the
detected device. If module loading fails, we unload everything and mark
the device as WIIMOTE_DEV_UNKNOWN. As long as a device is marked as
"unknown", no sub-devices will be used and the device is considered
unsupported.

All the different sub-devices, including KEYS, RUMBLE, BATTERY, LEDS,
ACCELEROMETER, IR and more will be ported in follow-up patches to the new
module layer.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Our output queue is asynchronous but synchronous reports may wait for a
response to their request. Therefore, wake them up unconditionally if an
output report couldn't be sent. But keep the report ID intact so we don't
incorrectly assume our request succeeded.

Note that the underlying connection is required to be reliable and does
retransmission itself. So it is safe to assume that if the transmission
fails, the device is in inconsistent state. Hence, we abort every request
if any output report fails. No need to verify which report failed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Battery reports are sent along every status report of the Wii Remote.
So chances are pretty high that we have an up-to-date battery
cache at any time. Therefore, initialize the battery-cache to 100% and
then return battery values from the cache if the query fails.

This works around a power_supply limitation in that it requires us to be
able to query the device during power_supply registration and
removal. Otherwise, "add" or "remove" udev events are not sent. If
we answer these requests from our cache instead, we avoid dropping these
events and no longer cause warnings printed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Nintendo produced many different devices that are internally based on the
Wii Remote protocol but provide different peripherals. To support these
devices, we need to schedule a device detection during initialization.

Device detection includes requesting a status report, reading extension
information and then evaluating which device we may be dealing with.

We currently detect gen1 and gen2 Wii Remote devices. All other devices
are marked as generic devices. More detections will be added later.

In followup patches we will be using these device IDs to control which
peripherals to initialize. For instance if a device is known to have no IR
camera, there is no need to provide the IR input device nor trying to
access IR registers. In fact, there are 3rd party devices that break if we
try things like this (hurray!).

The init_worker will be scheduled whenever we get hotplug events. This
isn't implemented, yet and will be added later. However, we need to make
sure that this worker can be called multiple times.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We need constant I/O to keep the state up-to-date and not miss any
packets. Hence, call hid_hw_open() during setup and hid_hw_close() during
destruction.

These are no-ops for Bluetooth HIDP, but lets be safe.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The output queue is independent of the other wiimote modules and can run
on its own. Therefore, move its members into a separate struct so we don't
run into name collisions with other modules.

This is only a syntactic change that renames all queue members to queue.*.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The hid-wiimote driver supports more than the Wii Remote. Nintendo
produced many devices based on the Wii Remote, which have extension
devices built-in. It is not clear to many users, that these devices have
anything in common with the Wii Remote, so fix the driver description.

This also updates the copyright information for the coming hotplugging
rework.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - fix usage of sleeping lock in atomic context from Jiri Kosina

 - build fix for hid-steelseries under certain .config setups by Simon Wood

 - simple mismerge fix from Fernando Luis Vázquez Cao

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: debug: fix RCU preemption issue
  HID: hid-steelseries fix led class build issue
  HID: reintroduce fix-up for certain Sony RF receivers

Pull sound fixes from Takashi Iwai:
 "This contains small fixes since the previous pull request:

   - A few regression fixes and small updates of HD-audio

   - Yet another fix for Haswell HDMI audio

   - A copule of trivial fixes in ASoC McASP, DPAM and WM8994"

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  Revert "ALSA: hda - Don't set up active streams twice"
  ALSA: Add comment for control TLV API
  ALSA: hda - Apply pin-enablement workaround to all Haswell HDMI codecs
  ALSA: HDA: Fix Oops caused by dereference NULL pointer
  ALSA: mips/sgio2audio: Remove redundant platform_set_drvdata()
  ALSA: mips/hal2: Remove redundant platform_set_drvdata()
  ALSA: hda - Fix 3.9 regression of EAPD init on Conexant codecs
  sound: Fix make allmodconfig on MIPS
  ALSA: hda - Fix system panic when DMA > 40 bits for Nvidia audio controllers
  ALSA: atmel: Remove redundant platform_set_drvdata()
  ASoC: McASP: Fix receive clock polarity in DAIFMT_NB_NF mode.
  ASoC: wm8994: missing break in wm8994_aif3_hw_params()
  ASoC: McASP: Add pins output direction for rx clocks when configured in CBS_CFS format
  ASoC: dapm: use clk_prepare_enable and clk_disable_unprepare

Pull MIPS updates from Ralf Baechle:

 - More work on DT support for various platforms

 - Various fixes that were to late to make it straight into 3.9

 - Improved platform support, in particular the Netlogic XLR and
   BCM63xx, and the SEAD3 and Malta eval boards.

 - Support for several Ralink SOC families.

 - Complete support for the microMIPS ASE which basically reencodes the
   existing MIPS32/MIPS64 ISA to use non-constant size instructions.

 - Some fallout from LTO work which remove old cruft and will generally
   make the MIPS kernel easier to maintain and resistant to compiler
   optimization, even in absence of LTO.

 - KVM support.  While MIPS has announced hardware virtualization
   extensions this KVM extension uses trap and emulate mode for
   virtualization of MIPS32.  More KVM work to add support for VZ
   hardware virtualizaiton extensions and MIPS64 will probably already
   be merged for 3.11.

Most of this has been sitting in -next for a long time.  All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.

Semantic conflict with kvm updates done as per Ralf

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
  MIPS: Add new GIC clockevent driver.
  MIPS: Formatting clean-ups for clocksources.
  MIPS: Refactor GIC clocksource code.
  MIPS: Move 'gic_frequency' to common location.
  MIPS: Move 'gic_present' to common location.
  MIPS: MIPS16e: Add unaligned access support.
  MIPS: MIPS16e: Support handling of delay slots.
  MIPS: MIPS16e: Add instruction formats.
  MIPS: microMIPS: Optimise 'strnlen' core library function.
  MIPS: microMIPS: Optimise 'strlen' core library function.
  MIPS: microMIPS: Optimise 'strncpy' core library function.
  MIPS: microMIPS: Optimise 'memset' core library function.
  MIPS: microMIPS: Add configuration option for microMIPS kernel.
  MIPS: microMIPS: Disable LL/SC and fix linker bug.
  MIPS: microMIPS: Add vdso support.
  MIPS: microMIPS: Add unaligned access support.
  MIPS: microMIPS: Support handling of delay slots.
  MIPS: microMIPS: Add support for exception handling.
  MIPS: microMIPS: Floating point support.
  MIPS: microMIPS: Fix macro naming in micro-assembler.
  ...

Pull second set of arc arch updates from Vineet Gupta:
 "Aliasing VIPT dcache support for ARC

  I'm satisified with testing, specially with fuse which has
  historically given grief to VIPT arches (ARM/PARISC...)"

* tag 'arc-v3.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [TB10x] Remove GENERIC_GPIO
  ARC: [mm] Aliasing VIPT dcache support 4/4
  ARC: [mm] Aliasing VIPT dcache support 3/4
  ARC: [mm] Aliasing VIPT dcache support 2/4
  ARC: [mm] Aliasing VIPT dcache support 1/4
  ARC: [mm] refactor the core (i|d)cache line ops loops
  ARC: [mm] serious bug in vaddr based icache flush

Pull m68knommu updates from Greg Ungerer:
 "The bulk of the changes are generalizing the ColdFire v3 core support
  and adding in 537x CPU support.  Also a couple of other bug fixes, one
  to fix a reintroduction of a past bug in the romfs filesystem nommu
  support."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: enable Timer on coldfire 532x
  m68knommu: fix ColdFire 5373/5329 QSPI base address
  m68knommu: add support for configuring a Freescale M5373EVB board
  m68knommu: add support for the ColdFire 537x family of CPUs
  m68knommu: make ColdFire M532x platform support more v3 generic
  m68knommu: create and use a common M53xx ColdFire class of CPUs
  m68k: remove unused asm/dbg.h
  m68k: Set ColdFire ACR1 cache mode depending on kernel configuration
  romfs: fix nommu map length to keep inside filesystem
  m68k: clean up unused "config ROMVECSIZE"

Pull blackfin updates from Steven Miao.

* tag 'for-linus' of git://github.com/realmz/blackfin-linux:
  bfin cache: dcplb map: add 16M dcplb map for BF60x
  blackfin: smp: fix smp build after drop asm/system.h
  blackfin: fix bootup core clock and system clock display
  Platform Nand: Set the GPIO for NAND read as input
  blackfin: rename vmImage to uImage after we move to buildroot
  blackfin: twi: Remove bogus #endif
  bf609: rsi: Add bf609 rsi MMR macro and board platform data.
  blackfin: dmc: Improve DDR2 write through in DMC effict controller.

Pull microblaze updates from Michal Simek.

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Enable IRQ in arch_cpu_idle
  microblaze: Fix uaccess_ok macro
  microblaze: Add support for new cpu versions and target architecture
  microblaze: Do not select OPT_LIB_ASM by default
  microblaze: Fix initrd support
  microblaze: Do not use r6 in head.S
  microblaze: pci: Remove duplicated header
  microblaze: Set the default irq_domain
  microblaze: pci: Remove duplicated include from pci-common.c

This reverts commit affdb62b.

The commit introduced a regression with AD codecs where the stream is
always clean up.  Since the patch is just a minor optimization and
reverting the commit fixes the issue, let's just revert it.
Reported-and-tested-by: Michael Burian <michael.burian@sbg.at>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This tracks Alexandre Courbot's mainline GPIO rework
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>

Pull trivial pstore update from Tony Luck:
 "Couple of pstore cleanups"

It turns out that the kmemdup() conversion ends up being undone by the
fact that the memory block also needed the ecc information (see commit
bd08ec33: "pstore/ram: Restore ecc information block"), so all that
remains after merging is the error return code change.

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore/ram: fix error return code in ramoops_probe()
  fs: pstore: Replaced calls to kmalloc and memcpy with kmemdup

Pull NVMe driver update from Matthew Wilcox:
 "Lots of exciting new features in the NVM Express driver this time,
  including support for emulating SCSI commands, discard support and the
  ability to submit per-sector metadata with I/Os.

  It's still mostly bugfixes though!"

* git://git.infradead.org/users/willy/linux-nvme: (27 commits)
  NVMe: Use user defined admin ioctl timeout
  NVMe: Simplify Firmware Activate code slightly
  NVMe: Only clear the enable bit when disabling controller
  NVMe: Wait for device to acknowledge shutdown
  NVMe: Schedule timeout for sync commands
  NVMe: Meta-data support in NVME_IOCTL_SUBMIT_IO
  NVMe: Device specific stripe size handling
  NVMe: Split non-mergeable bio requests
  NVMe: Remove dead code in nvme_dev_add
  NVMe: Check for NULL memory in nvme_dev_add
  NVMe: Fix error clean-up on nvme_alloc_queue
  NVMe: Free admin queue on request_irq error
  NVMe: Add scsi unmap to SG_IO
  NVMe: queue usage fixes in nvme-scsi
  NVMe: Set TASK_INTERRUPTIBLE before processing queues
  NVMe: Add a character device for each nvme device
  NVMe: Fix endian-related problems in user I/O submission path
  NVMe: Fix I/O cancellation status on big-endian machines
  NVMe: Fix sparse warnings in scsi emulation
  NVMe: Don't fail initialisation unnecessarily
  ...

Pull ACPICA fixes from Rafael Wysocki:

 - _INI regression fix from Tomasz Nowicki.

 - Fix for a possible memory leak in _OSI support routine from Jung-uk
   Kim.

 - Fix for a possible buffer overflow during field unit read operation
   from Bob Moore.

* tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: ACPICA: Fix for _INI regression
  ACPICA: _OSI support: Fix possible memory leak
  ACPICA: Fix possible buffer overflow during a field unit read operation

Pull ARM SoC fixes and straggler patches from Olof Johansson:
 "A collection of fixes for fall out from 3.10 merge window, some build
  fixes and warning cleanups and a small handful of patches that were
  small and contained and made sense to still include in 3.10 (some of
  these have also been in -next since the merge window opened).

  Largest continous series is for OMAP, but there's a handful for other
  platforms.

  For i.MX, one of the patches are framebuffer fixups due to fallout
  during the merge window, and the other removes some stale and broken
  code."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: dts: Fixed vbus-gpios
  ARM: EXYNOS5: Fix kernel dump in AFTR idle mode
  ARM: ux500: Rid ignored return value of regulator_enable() compiler warning
  ARM: ux500: read the correct soc_id number
  ARM: exynos: dts: cros5250: add cyapa trackpad
  video: mxsfb: Adapt to new videomode API
  ARM: imx: Select GENERIC_ALLOCATOR
  ARM: imx: compile fix for hotplug.c
  ARM: dts: don't assume boards are using twl4030 for omap3
  ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
  ARM: dts: Configure and fix the McSPI pins for 4430sdp
  ARM: dts: AM33XX: Add GPMC node
  ARM: dts: OMAP4460: Fix CPU OPP voltages
  ARM: dts: OMAP36xx: Fix CPU OPP voltages
  ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  omap: mux: add AM/DM37x gpios
  ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  ARM: OMAP2+: omap_device: use late_initcall_sync
  ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  ...

Pull xtensa updates from Chris Zankel:
 "Support for the latest MMU architecture that allows for a larger
  accessible memory region, and various bug-fixes"

* tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux:
  xtensa: Switch to asm-generic/linkage.h
  xtensa: fix redboot load address
  xtensa: ISS: fix timer_lock usage in rs_open
  xtensa: disable IRQs while IRQ handler is running
  xtensa: enable lockdep support
  xtensa: fix arch_irqs_disabled_flags implementation
  xtensa: add irq flags trace support
  xtensa: provide custom CALLER_ADDR* implementations
  xtensa: add stacktrace support
  xtensa: clean up stpill_registers
  xtensa: don't use a7 in simcalls
  xtensa: don't attempt to use unconfigured timers
  xtensa: provide default platform_pcibios_init implementation
  xtensa: remove KCORE_ELF again
  xtensa: document MMUv3 setup sequence
  xtensa: add MMU v3 support
  xtensa: fix ibreakenable register update
  xtensa: fix oprofile building as module

Pull ARC port updates from Vineet Gupta:
 "Support for two new platforms based on ARC700:
   - Abilis TB10x SoC [Chritisian/Pierrick]
   - Simulator only System-C Model [Mischa]

  ARC specific MM improvements:
   - Avoid full TLB flush (ASID increment) on munmap (even single page)
   - VIPT Cache Flushing improvements
     + Delayed dcache flush for non-aliasing dcache (big performance boost)
     + icache flush aliasing agnostic (no need to kill all possible aliases)

  Others:
   - Avoid needless rebuild of DTB files for every kernel build
   - Remove builtin cmdline as that is already provided by DeviceTree/bootargs
   - Fixing unaligned access emulation corner case
   - checkpatch fixes [Sachin]
   - Various fixlets [Noam]
   - Minor build failures/cleanups"

* tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits)
  ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
  ARC: [mm] micro-optimize page size icache invalidate
  ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
  ARC: [mm] consolidate icache/dcache sync code
  ARC: [mm] optimise icache flush for kernel mappings
  ARC: [mm] optimise icache flush for user mappings
  ARC: [mm] optimize needless full mm TLB flush on munmap
  ARC: Add support for nSIM OSCI System C model
  ARC: [TB10x] Adapt device tree to new compatible string
  ARC: [TB10x] Add support for TB10x platform
  ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
  ARC: Prepare interrupt code for external controllers
  ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
  ARC: [cmdline] Don't overwrite u-boot provided bootargs
  ARC: [cmdline] Remove CONFIG_CMDLINE
  ARC: [plat-arcfpga] defconfig update
  ARC: unaligned access emulation broken if callee-reg dest of LD/ST
  ARC: unaligned access emulation error handling consolidation
  ARC: Debug/crash-printing Improvements
  ARC: fix typo with clock speed
  ...

Pull tile update from Chris Metcalf:
 "The interesting bug fix is support for the upcoming "4.2" release of
  the Tilera hypervisor, which by default launches Linux at privilege
  level 2 instead of 1.  The fix lets new and old hypervisors and
  Linuxes interoperate more smoothly, so I've tagged it for
  stable@kernel.org so that older Linuxes will be able to boot under the
  newer hypervisor."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  usb: tilegx: fix memleak when create hcd fail
  arch/tile: remove inline marking of EXPORT_SYMBOL functions
  rtc: rtc-tile: add missing platform_device_unregister() when module exit
  tile: support new Tilera hypervisor

Dave reported an oops triggered by trinity:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: newseg+0x10d/0x390
  PGD cf8c1067 PUD cf8c2067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU: 2 PID: 7636 Comm: trinity-child2 Not tainted 3.9.0+#67
  ...
  Call Trace:
    ipcget+0x182/0x380
    SyS_shmget+0x5a/0x60
    tracesys+0xdd/0xe2

This bug was introduced by commit af73e4d9 ("hugetlbfs: fix mmap
failure in unaligned size request").
Reported-by: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Zefan <lizfan@huawei.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The semctl GETNCNT returns the number of semops waiting for the
specified semaphore to become nonzero.  After commit 9f1bc2c9
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.

In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The semctl GETZCNT returns the number of semops waiting for the
specified semaphore to become zero.  After commit 9f1bc2c9
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.

In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.

This bug broke dbench; it works again with this patch applied.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Kent Overstreet <koverstreet@google.com>
Tested-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more vfs fixes from Al Viro:
 "Regression fix from Geert + yet another open-coded kernel_read()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ecryptfs: don't open-code kernel_read()
  xtensa simdisk: Fix proc_create_data() conversion fallout

The 'samsung,vbus-gpio' was submitted before pinmux landed for
exynos5250 and uses the old-style gpio specifier.  Fix the two
exynos5250 boards that use it.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>