- 24 Apr, 2023 8 commits
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230313075430.2730803-5-u.kleine-koenig@pengutronix.de
-
Uwe Kleine-König authored
If a platform driver's remove callback returns an error code, the driver core emits a generic (and thus little helpful) error message. Instead emit a more specifc error message about the actual error and return zero to suppress the core's message. Note that returning zero has no side effects apart from not emitting said error message. This prepares converting platform driver's remove message to return void. Signed-off-by:
-
Uwe Kleine-König authored
The comment in the remove callback suggests that the driver is not supposed to be unbound. However returning an error code in the remove callback doesn't accomplish that. Instead set the suppress_bind_attrs property (which makes it impossible to unbind the driver via sysfs). The only remaining way to unbind an stm32-lp device would be module unloading, but that doesn't apply here, as the driver cannot be built as a module. Also drop the useless remove callback. [dlezcano] : Fixed up the wrong function removed Signed-off-by:
-
Uwe Kleine-König authored
The comment in the remove callback suggests that the driver is not supposed to be unbound. However returning an error code in the remove callback doesn't accomplish that. Instead set the suppress_bind_attrs property (which makes it impossible to unbind the driver via sysfs). The only remaining way to unbind a sh_tmu2 device would be module unloading, but that doesn't apply here, as the driver cannot be built as a module. Also drop the useless remove callback. Signed-off-by:
-
Rob Herring authored
Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource(). Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Fabio Estevam authored
mxc_timer_init() was originally only used by non-DT i.MX platforms. i.MX has already been converted to be a DT-only platform. Remove the unused mxc_timer_init() function. Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
-
AngeloGioacchino Del Regno authored
On MediaTek platforms, CPUXGPT is the source for the AArch64 System Timer, read through CNTVCT_EL0. The handling for starting this timer ASAP was introduced in commit 327e93cf ("clocksource/drivers/timer-mediatek: Implement CPUXGPT timers") which description also contains an important full explanation of the reasons why this driver is necessary and cannot be a module. In preparation for an eventual conversion of timer-mediatek to a platform_driver that would be possibly built as a module, split out the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver. This commit brings no functional changes. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Walter Chang <walter.chang@mediatek.com> Signed-off-by:
-
Krzysztof Kozlowski authored
For a shared timers, the mct_init_dt() should not initialize the clock even with global comparator. This is not an error, thus the function should simply return 0, not 'ret'. This also fixes smatch warning: drivers/clocksource/exynos_mct.c:635 mct_init_dt() warn: missing error code? 'ret' Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202304021446.46XVKag0-lkp@intel.com/Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
- 21 Apr, 2023 1 commit
-
-
Thomas Gleixner authored
For some unknown reason the introduction of the timer_wait_running callback missed to fixup posix CPU timers, which went unnoticed for almost four years. Marco reported recently that the WARN_ON() in timer_wait_running() triggers with a posix CPU timer test case. Posix CPU timers have two execution models for expiring timers depending on CONFIG_POSIX_CPU_TIMERS_TASK_WORK: 1) If not enabled, the expiry happens in hard interrupt context so spin waiting on the remote CPU is reasonably time bound. Implement an empty stub function for that case. 2) If enabled, the expiry happens in task work before returning to user space or guest mode. The expired timers are marked as firing and moved from the timer queue to a local list head with sighand lock held. Once the timers are moved, sighand lock is dropped and the expiry happens in fully preemptible context. That means the expiring task can be scheduled out, migrated, interrupted etc. So spin waiting on it is more than suboptimal. The timer wheel has a timer_wait_running() mechanism for RT, which uses a per CPU timer-base expiry lock which is held by the expiry code and the task waiting for the timer function to complete blocks on that lock. This does not work in the same way for posix CPU timers as there is no timer base and expiry for process wide timers can run on any task belonging to that process, but the concept of waiting on an expiry lock can be used too in a slightly different way: - Add a mutex to struct posix_cputimers_work. This struct is per task and used to schedule the expiry task work from the timer interrupt. - Add a task_struct pointer to struct cpu_timer which is used to store a the task which runs the expiry. That's filled in when the task moves the expired timers to the local expiry list. That's not affecting the size of the k_itimer union as there are bigger union members already - Let the task take the expiry mutex around the expiry function - Let the waiter acquire a task reference with rcu_read_lock() held and block on the expiry mutex This avoids spin-waiting on a task which might not even be on a CPU and works nicely for RT too. Fixes: ec8f954a ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT") Reported-by:Marco Elver <elver@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Frederic Weisbecker <frederic@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
-
- 18 Apr, 2023 9 commits
-
-
Frederic Weisbecker authored
The first field of /proc/uptime relies on the CLOCK_BOOTTIME clock which can also be fetched from clock_gettime() API. Improve the test coverage while verifying the monotonicity of CLOCK_BOOTTIME accross both interfaces. Suggested-by:
-
Frederic Weisbecker authored
Due to broken iowait task counting design (cf: comments above get_cpu_idle_time_us() and nr_iowait()), it is not possible to provide the guarantee that /proc/stat or /proc/uptime display monotonic idle time values. Remove the assertions that verify the related wrong assumption so that testers and maintainers don't spend more time on that. Reported-by:
Yu Liao <liaoyu15@huawei.com> Reported-by:
-
Frederic Weisbecker authored
Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230222144649.624380-7-frederic@kernel.org
-
Frederic Weisbecker authored
There is no need for the __tick_nohz_idle_stop_tick() function between tick_nohz_idle_stop_tick() and its implementation. Remove that unnecessary step. Signed-off-by:
-
Frederic Weisbecker authored
The per-cpu iowait task counter is incremented locally upon sleeping. But since the task can be woken to (and by) another CPU, the counter may then be decremented remotely. This is the source of a race involving readers VS writer of idle/iowait sleeptime. The following scenario shows an example where a /proc/stat reader observes a pending sleep time as IO whereas that pending sleep time later eventually gets accounted as non-IO. CPU 0 CPU 1 CPU 2 ----- ----- ------ //io_schedule() TASK A current->in_iowait = 1 rq(0)->nr_iowait++ //switch to idle // READ /proc/stat // See nr_iowait_cpu(0) == 1 return ts->iowait_sleeptime + ktime_sub(ktime_get(), ts->idle_entrytime) //try_to_wake_up(TASK A) rq(0)->nr_iowait-- //idle exit // See nr_iowait_cpu(0) == 0 ts->idle_sleeptime += ktime_sub(ktime_get(), ts->idle_entrytime) As a result subsequent reads on /proc/stat may expose backward progress. This is unfortunately hardly fixable. Just add a comment about that condition. Signed-off-by: -
Frederic Weisbecker authored
Reading idle/IO sleep time (eg: from /proc/stat) can race with idle exit updates because the state machine handling the stats is not atomic and requires a coherent read batch. As a result reading the sleep time may report irrelevant or backward values. Fix this with protecting the simple state machine within a seqcount. This is expected to be cheap enough not to add measurable performance impact on the idle path. Note this only fixes reader VS writer condition partitially. A race remains that involves remote updates of the CPU iowait task counter. It can hardly be fixed. Reported-by:
-
Frederic Weisbecker authored
The idle and IO sleeptime statistics appearing in /proc/stat can be currently updated from two sites: locally on idle exit and remotely by cpufreq. However there is no synchronization mechanism protecting concurrent updates. It is therefore possible to account the sleeptime twice, among all the other possible broken scenarios. To prevent from breaking the sleeptime accounting source, restrict the sleeptime updates to the local idle exit site. If there is a delta to add since the last update, IO/Idle sleep time readers will now only compute the delta without actually writing it back to the internal idle statistic fields. This fixes a writer VS writer race. Note there are still two known reader VS writer races to handle. A subsequent patch will fix one. Reported-by:
-
Frederic Weisbecker authored
Restructure and group fields by access in order to optimize cache layout. While at it, also add missing kernel doc for two fields: @last_jiffies and @idle_expires. Reported-by:
-
Sebastian Andrzej Siewior authored
With HIGHRES enabled tick_sched_timer() is programmed every jiffy to expire the timer_list timers. This timer is programmed accurate in respect to CLOCK_MONOTONIC so that 0 seconds and nanoseconds is the first tick and the next one is 1000/CONFIG_HZ ms later. For HZ=250 it is every 4 ms and so based on the current time the next tick can be computed. This accuracy broke since the commit mentioned below because the jiffy based clocksource is initialized with higher accuracy in read_persistent_wall_and_boot_offset(). This higher accuracy is inherited during the setup in tick_setup_device(). The timer still fires every 4ms with HZ=250 but timer is no longer aligned with CLOCK_MONOTONIC with 0 as it origin but has an offset in the us/ns part of the timestamp. The offset differs with every boot and makes it impossible for user land to align with the tick. Align the tick period with CLOCK_MONOTONIC ensuring that it is always a multiple of 1000/CONFIG_HZ ms. Fixes: 857baa87 ("sched/clock: Enable sched clock early") Reported-by:
Gusenleitner Klaus <gus@keba.com> Signed-off-by:
-
- 16 Apr, 2023 2 commits
-
-
Dmitry Vyukov authored
Test that POSIX timers using CLOCK_PROCESS_CPUTIME_ID eventually deliver a signal to all running threads. This effectively tests that the kernel doesn't prefer any one thread (or subset of threads) for signal delivery. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Dmitry Vyukov authored
POSIX timers using the CLOCK_PROCESS_CPUTIME_ID clock prefer the main thread of a thread group for signal delivery. However, this has a significant downside: it requires waking up a potentially idle thread. Instead, prefer to deliver signals to the current thread (in the same thread group) if SIGEV_THREAD_ID is not set by the user. This does not change guaranteed semantics, since POSIX process CPU time timers have never guaranteed that signal delivery is to a specific thread (without SIGEV_THREAD_ID set). The effect is that queueing the signal no longer wakes up potentially idle threads, and the kernel is no longer biased towards delivering the timer signal to any particular thread (which better distributes the timer signals esp. when multiple timers fire concurrently). Suggested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
- 21 Mar, 2023 1 commit
-
-
Fangrui Song authored
The actual intention is that no dynamic relocation exists in the VDSO. For this the VDSO build validates that the resulting .so file does not have any relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture, which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative relocations too. However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If a port fails to determine the exact .rel[a].dyn size, the trailing zeros become R_*_NONE relocations. E.g. ld's powerpc port recently fixed https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are generally a no-op in the dynamic loaders. So just ignore them. Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting .so file does not contain any R_* relocation entries except R_*_NONE. Signed-off-by:
Fangrui Song <maskray@google.com> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64 Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com
-
- 19 Mar, 2023 16 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix setting affinity of hwlat threads in containers Using sched_set_affinity() has unwanted side effects when being called within a container. Use set_cpus_allowed_ptr() instead - Fix per cpu thread management of the hwlat tracer: - Do not start per_cpu threads if one is already running for the CPU - When starting per_cpu threads, do not clear the kthread variable as it may already be set to running per cpu threads - Fix return value for test_gen_kprobe_cmd() On error the return value was overwritten by being set to the result of the call from kprobe_event_delete(), which would likely succeed, and thus have the function return success - Fix splice() reads from the trace file that was broken by commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") - Remove obsolete and confusing comment in ring_buffer.c The original design of the ring buffer used struct page flags for tricks to optimize, which was shortly removed due to them being tricks. But a comment for those tricks remained - Set local functions and variables to static * tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr ring-buffer: remove obsolete comment for free_buffer_page() tracing: Make splice_read available again ftrace: Set direct_ops storage-class-specifier to static trace/hwlat: Do not start per-cpu thread if it is already running trace/hwlat: Do not wipe the contents of per-cpu thread data tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static tracing: Fix wrong return in kprobe_event_gen_test.c -
Costa Shulyupin authored
There is a problem with the behavior of hwlat in a container, resulting in incorrect output. A warning message is generated: "cpumask changed while in round-robin mode, switching to mode none", and the tracing_cpumask is ignored. This issue arises because the kernel thread, hwlatd, is not a part of the container, and the function sched_setaffinity is unable to locate it using its PID. Additionally, the task_struct of hwlatd is already known. Ultimately, the function set_cpus_allowed_ptr achieves the same outcome as sched_setaffinity, but employs task_struct instead of PID. Test case: # cd /sys/kernel/tracing # echo 0 > tracing_on # echo round-robin > hwlat_detector/mode # echo hwlat > current_tracer # unshare --fork --pid bash -c 'echo 1 > tracing_on' # dmesg -c Actual behavior: [573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by:
Costa Shulyupin <costa.shul@redhat.com> Acked-by:
Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Vlastimil Babka authored
The comment refers to mm/slob.c which is being removed. It comes from commit ed56829c ("ring_buffer: reset buffer page when freeing") and according to Steven the borrowed code was a page mapcount and mapping reset, which was later removed by commit e4c2ce82 ("ring_buffer: allocate buffer page pointer"). Thus the comment is not accurate anyway, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Reported-by:
Mike Rapoport <mike.rapoport@gmail.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by:
-
Sung-hun Kim authored
Since the commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") is applied to the kernel, splice() and sendfile() calls on the trace file (/sys/kernel/debug/tracing /trace) return EINVAL. This patch restores these system calls by initializing splice_read in file_operations of the trace file. This patch only enables such functionalities for the read case. Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com Cc: stable@vger.kernel.org Fixes: 36e2c742 ("fs: don't allow splice read/write without explicit ops") Signed-off-by:
Sung-hun Kim <sfoon.kim@samsung.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve some reported issues. They include: - 8250 driver Kconfig issue pointed out by you that showed up in -rc1 - qcom-geni serial driver fixes - various 8250 driver fixes for reported problems - fsl_lpuart driver fixes - serdev fix for regression in -rc1 - vt.c bugfix All have been in linux-next for over a week with no reported problems" * tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: protect KD_FONT_OP_GET_TALL from unbound access serial: qcom-geni: drop bogus uart_write_wakeup() serial: qcom-geni: fix mapping of empty DMA buffer serial: qcom-geni: fix DMA mapping leak on shutdown serial: qcom-geni: fix console shutdown hang serdev: Set fwnode for serdev devices tty: serial: fsl_lpuart: fix race on RX DMA shutdown serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default serial: 8250_fsl: fix handle_irq locking serial: 8250_em: Fix UART port type serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc/other driver subsystem patches to resolve reported problems for 6.3-rc3. Included in here are: - Interconnect driver fixes for reported problems - Memory driver fixes for reported problems - nvmem core fix - firmware driver fix for reported problem All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits) memory: tegra30-emc: fix interconnect registration race memory: tegra20-emc: fix interconnect registration race memory: tegra124-emc: fix interconnect registration race memory: tegra: fix interconnect registration race interconnect: exynos: drop redundant link destroy interconnect: exynos: fix registration race interconnect: exynos: fix node leak in probe PM QoS error path interconnect: qcom: msm8974: fix registration race interconnect: qcom: rpmh: fix registration race interconnect: qcom: rpmh: fix probe child-node error handling interconnect: qcom: rpm: fix registration race nvmem: core: return -ENOENT if nvmem cell is not found firmware: xilinx: don't make a sleepable memory allocation from an atomic context interconnect: qcom: rpm: fix probe child-node error handling interconnect: qcom: osm-l3: fix registration race interconnect: imx: fix registration race interconnect: fix provider registration API interconnect: fix icc_provider_del() error handling interconnect: fix mem leak when freeing nodes interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fix from Borislav Petkov: - Flush out logged errors immediately after MCA banks configuration changes over sysfs have been done instead of waiting until something else triggers the workqueue later - another error or the polling interval cycle is reached * tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make sure logged MCEs are processed after sysfs update
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Check whether sibling events have been deactivated before adding them to groups - Update the proper event time tracking variable depending on the event type - Fix a memory overwrite issue due to using the wrong function argument when outputting perf events * tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix check before add_event_to_groups() in perf_group_detach() perf: fix perf_event_context->time perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "There's a little bit more 'movement' in there for my taste but it needs to happen and should make the code better after it. - Check cmdline_find_option()'s return value before further processing - Clear temporary storage in the resctrl code to prevent access to an unexistent MSR - Add a simple throttling mechanism to protect the hypervisor from potentially malicious SEV guests issuing requests in rapid succession. In order to not jeopardize the sanity of everyone involved in maintaining this code, the request issuing side has received a cleanup, split in more or less trivial, small and digestible pieces. Otherwise, the code was threatening to become an unmaintainable mess. Therefore, that cleanup is marked indirectly also for stable so that there's no differences between the upstream code and the stable variant when it comes down to backporting more there" * tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix use of uninitialized buffer in sme_enable() x86/resctrl: Clear staged_config[] before and after it is used virt/coco/sev-guest: Add throttling awareness virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case virt/coco/sev-guest: Do some code style cleanups virt/coco/sev-guest: Carve out the request issuing logic into a helper virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request() virt/coco/sev-guest: Simplify extended guest request handling virt/coco/sev-guest: Check SEV_SNP attribute at probe time -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fix from Ted Ts'o: "Fix a double unlock bug on an error path in ext4, found by smatch and syzkaller" * tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix possible double unlock when moving a directory
-
Tom Rix authored
smatch reports this warning kernel/trace/ftrace.c:2594:19: warning: symbol 'direct_ops' was not declared. Should it be static? The variable direct_ops is only used in ftrace.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.comSigned-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
-
Tero Kristo authored
The hwlatd tracer will end up starting multiple per-cpu threads with the following script: #!/bin/sh cd /sys/kernel/debug/tracing echo 0 > tracing_on echo hwlat > current_tracer echo per-cpu > hwlat_detector/mode echo 100000 > hwlat_detector/width echo 200000 > hwlat_detector/window echo 1 > tracing_on To fix the issue, check if the hwlatd thread for the cpu is already running, before starting a new one. Along with the previous patch, this avoids running multiple instances of the same CPU thread on the system. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:Tero Kristo <tero.kristo@linux.intel.com> Acked-by:
-
Tero Kristo authored
Do not wipe the contents of the per-cpu kthread data when starting the tracer, as this will completely forget about already running instances and can later start new additional per-cpu threads. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:
-
Tom Rix authored
smatch reports several similar warnings kernel/trace/trace_osnoise.c:220:1: warning: symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:243:1: warning: symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:335:14: warning: symbol 'interface_lock' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2242:5: warning: symbol 'timerlat_min_period' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2243:5: warning: symbol 'timerlat_max_period' was not declared. Should it be static? These variables are only used in trace_osnoise.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.comSigned-off-by:
-
Anton Gusev authored
Overwriting the error code with the deletion result may cause the function to return 0 despite encountering an error. Commit b111545d ("tracing: Remove the useless value assignment in test_create_synth_event()") solves a similar issue by returning the original error code, so this patch does the same. Found by Linux Verification Center (linuxtesting.org) with SVACE. Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ruSigned-off-by:
Anton Gusev <aagusev@ispras.ru> Reviewed-by:
-
- 18 Mar, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "The majority of lines changed is due to a code style cleanup in the pnmtologo helper program. Arnd removed the omap1 osk driver and the SIS fb driver is now orphaned. Other than that it's the usual bunch of small fixes and cleanups, e.g. prevent possible divide-by-zero in various fb drivers if the pixclock is zero and various conversions to devm_platform*() and of_property*() functions: - Drop omap1 osk driver - Various potential divide by zero pixclock fixes - Add pixelclock and fb_check_var() to stifb - Code style cleanups and indenting fixes" * tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Use of_property_present() for testing DT property presence fbdev: au1200fb: Fix potential divide by zero fbdev: lxfb: Fix potential divide by zero fbdev: intelfb: Fix potential divide by zero fbdev: nvidia: Fix potential divide by zero fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks fbdev: omapfb: remove omap1 osk driver fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource() fbdev: wm8505fb: Use devm_platform_ioremap_resource() fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource() fbdev: Use of_property_read_bool() for boolean properties fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource() fbdev: tgafb: Fix potential divide by zero MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER fbdev: omapfb: cleanup inconsistent indentation drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c drivers: video: logo: fix code style issues in pnmtologo.c
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Exclude kallsyms_seqs_of_names from kallsyms to fix build error - Fix 'make kernelrelease' for external module builds - Get the Debian source package compilable again - Fix the wrong uname when Debian packages are built with the KDEB_PKGVERSION option - Fix superfluous CROSS_COMPILE when building Debian packages - Fix RPM package build error when KCONFIG_CONFIG is set - Use 'git archive' for creating source tarballs - Remove the scripts/list-gitignored tool * tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: use git-archive for source package creation kbuild: rpm-pkg: move source components to rpmbuild/SOURCES kbuild: deb-pkg: use dh_listpackages to know enabled packages kbuild: deb-pkg: split image and debug objects staging out into functions kbuild: deb-pkg: set CROSS_COMPILE only when undefined kbuild: deb-pkg: do not take KERNELRELEASE from the source version kbuild: deb-pkg: make debian source package working again Makefile: Make kernelrelease target work with M= kconfig: Update config changed flag before calling callback kallsyms: add kallsyms_seqs_of_names to list of special symbols
-
Linus Torvalds authored
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - ltc2992, adm1266: Set missing can_sleep flag - tmp512/tmp513: Drop of_match_ptr for ID table to fix build with !CONFIG_OF - ucd90320: Fix back-to-back access problem - ina3221: Fix bad error return from probe function - xgene: Fix use-after-free bug in remove function - adt7475: Fix hysteresis register bit masks, and fix association of 'smoothing' attributes * tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip hwmon: (adm1266) Set `can_sleep` flag for GPIO chip hwmon: tmp512: drop of_match_ptr for ID table hwmon: (ucd90320) Add minimum delay between bus accesses hwmon: (ina3221) return prober error code hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition hwmon: (adt7475) Fix masking of hysteresis registers hwmon: (adt7475) Display smoothing attributes in correct order
-
