- 25 Mar, 2021 3 commits
-
-
Kuninori Morimoto authored
snd_soc_fixup_dai_links_platform_name() is assuming it is single platform. return error if multi platforms. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871rc7aoo9.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Current snd_soc_fixup_dai_links_platform_name() creates name first (A), and checks setup target pointer (B), and set it (C). We should check target pointer first IMO. This patch exchange the order to (B) -> (A) -> (C). int snd_soc_fixup_dai_links_platform_name(...) { ... /* set platform name for each dailink */ for_each_card_prelinks(card, i, dai_link) { (A) name = devm_kstrdup(...); if (!name) return -ENOMEM; (B) if (!dai_link->platforms) return -EINVAL; /* only single platform is supported for now */ (C) dai_link->platforms->name = name; } return 0; } Signed-off-by: -
Kuninori Morimoto authored
We shouldn't use dai_link->cpus/codecs/platforms directly, because these are array now to supporting multi CPU/Codec/Platform. This patch adds asoc_link_to_xxx() macro for it. Signed-off-by:
-
- 24 Mar, 2021 14 commits
-
-
Mark Brown authored
Merge series "MFD/extcon/ASoC: Rework arizona codec jack-detect support" from Hans de Goede <hdegoede@redhat.com>: Hi All, Here is v4 of my series to rework the arizona codec jack-detect support to use the snd_soc_jack helpers instead of direct extcon reporting. As discussed before here is a resend rebased on 5.12-rc2, making sure that all patches this depends on are in place. Lee, can you pick-up patches 1-6 through the MFD tree and then send a pull-req to Mark so that Mark can merge the Asoc parts throught the ASoC tree ? Patches 2-6 touch drivers/extcon, these all have an Ack from Chanwoo Choi for merging these through the MFD tree. Here is some more generic info on this series from the previous cover-letter: This is done by reworking the extcon driver into an arizona-jackdet library and then modifying the codec drivers to use that directly, replacing the old separate extcon child-devices and extcon-driver. This brings the arizona-codec jack-detect handling inline with how all other ASoC codec driver do this. This was developed and tested on a Lenovo Yoga Tablet 1051L with a WM5102 codec. This was also tested by Charles Keepax, one of the Cirrus Codec folks. Regards, Hans Hans de Goede (13): mfd: arizona: Drop arizona-extcon cells extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged extcon: arizona: Fix various races on driver unbind extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol") call extcon: arizona: Always use pm_runtime_get_sync() when we need the device to be awake ASoC/extcon: arizona: Move arizona jack code to sound/soc/codecs/arizona-jack.c ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv ASoC: arizona-jack: Use arizona->dev for runtime-pm ASoC: arizona-jack: convert into a helper library for codec drivers ASoC: arizona-jack: Use snd_soc_jack to report jack events ASoC: arizona-jack: Cleanup logging ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use the new jack library ASoC: Intel: bytcr_wm5102: Add jack detect support MAINTAINERS | 3 +- drivers/extcon/Kconfig | 8 - drivers/extcon/Makefile | 1 - drivers/mfd/arizona-core.c | 20 - sound/soc/codecs/Makefile | 2 +- .../soc/codecs/arizona-jack.c | 577 +++++++----------- sound/soc/codecs/arizona.h | 44 ++ sound/soc/codecs/wm5102.c | 12 +- sound/soc/codecs/wm5110.c | 12 +- sound/soc/codecs/wm8997.c | 14 +- sound/soc/codecs/wm8998.c | 9 + sound/soc/intel/boards/bytcr_wm5102.c | 28 +- 12 files changed, 325 insertions(+), 405 deletions(-) rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (76%) -- 2.30.1 -
Hans de Goede authored
Add jack detect support by creating a jack and calling snd_soc_component_set_jack to register the created jack with the codec. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-14-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Make all arizona codec drivers for which drivers/mfd/arizona-core.c used to instantiate a "arizona-extcon" child-device use the new arizona-jack.c library for jack-detection. This has been tested on a Lenovo Yoga Tablet 2 1051L with a WM5102 codec. Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by:
-
Hans de Goede authored
Cleanup the use of dev_foo functions used for logging: 1. Many of these are unnecessarily split over multiple lines 2. Use dev_err_probe() in cases where we might get a -EPROBE_DEFER return value Suggested-by:
-
Hans de Goede authored
Use the snd_soc_jack code to report jack events, instead of using extcon for reporting the cable-type + an input_dev for reporting the button presses. The snd_soc_jack code will report the cable-type through both input_dev events and through ALSA controls and the button-presses through input_dev events. Note that this means that when the codec drivers are moved over to use the new arizona-jack.c library code instead of having a separate MFD extcon cell with the extcon-arizona.c driver, we will no longer report extcon events to userspace for cable-type changes. This should not be a problem since "standard" Linux distro userspace does not (and has never) used the extcon class interface for this. Android does have support for the extcon class interface, but that was introduced in the same release as support for input_dev cable-type events, so this should not be a problem for Android either. Note this also reduces ARIZONA_MAX_MICD_RANGE from 8 to 6, this is ok to do since this info is always provided through pdata (or defaults) and cannot be overridden from devicetree. All in-kernel users of the pdata (and the fallback defaults) define 6 or less buttons/ranges. Reviewed-by:
-
Hans de Goede authored
Convert the arizona extcon driver into a helper library for direct use from the arizona codec-drivers, rather then being bound to a separate MFD cell. Note the probe (and remove) sequence is split into 2 parts: 1. The arizona_jack_codec_dev_probe() function inits a bunch of jack-detect specific variables in struct arizona_priv and tries to get a number of resources where getting them may fail with -EPROBE_DEFER. 2. Then once the machine driver has create a snd_sock_jack through snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on the codec component, which will call the new arizona_jack_set_jack(), which sets up jack-detection and requests the IRQs. This split is necessary, because the IRQ handlers need access to the arizona->dapm pointer and the snd_sock_jack which are not available when the codec-driver's probe function runs. Note this requires that machine-drivers for codecs which are converted to use the new helper functions from arizona-jack.c are modified to create a snd_soc_jack through snd_soc_card_jack_new() and register this jack with the codec through snd_soc_component_set_jack(). Reviewed-by:
-
Hans de Goede authored
Drivers for MFD child-devices such as the arizona codec drivers and the arizona-extcon driver can choose to either make runtime_pm_get/_put calls on their own child-device, which will then be propagated to their parent; or they can make them directly on their MFD parent-device. The arizona-extcon code was using runtime_pm_get/_put calls on its own child-device where as the codec drivers are using runtime_pm_get/_put calls on their parent. The arizona-extcon MFD cell/child-device has been removed and this commit is part of refactoring the arizona-extcon code into a library to be used directly from the codec drivers. Specifically this commit moves the code over to make runtime_pm_get/_put calls on the parent device (on arizona->dev) bringing the code inline with how the codec drivers do this. Note this also removes the pm_runtime_enable/_disable calls as pm_runtime support has already been enabled on the parent-device by the arizona MFD driver. This is part of a patch series converting the arizona extcon driver into a helper library for letting the arizona codec-drivers directly report jack state through the standard sound/soc/soc-jack.c functions. Reviewed-by:
-
Hans de Goede authored
Move all the jack-detect variables from struct arizona_extcon_info to struct arizona_priv. This is part of a patch series converting the arizona extcon driver into a helper library for letting the arizona codec-drivers directly report jack state through the standard sound/soc/soc-jack.c functions. Reviewed-by:
-
Shengjiu Wang authored
When there is power domain bind with ipg_clk clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by:Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/1616579928-22428-7-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
When there is power domain bind with ipg clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: -
Shengjiu Wang authored
When there is power domain bind with mem clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: -
Shengjiu Wang authored
When there is power domain bind with mem clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: -
Shengjiu Wang authored
When there is power domain bind with core clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: -
Shengjiu Wang authored
When there is power domain bind with bus clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by:
-
- 23 Mar, 2021 2 commits
-
-
Mark Brown authored
Merge tag 'ib-mfd-extcon-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into asoc-5.13 Immutable branch between MFD and Extcon due for the v5.13 merge window
-
Kai Vehmanen authored
Controller needs to ensure display power is enabled only for HDA controller reset. Drop the display power-up/down calls from D0i3 entry/exit paths. This was previously not possible as codec drivers could not resume the links, and instead controller kept the reference to display power. The state of display power had be maintained in the D0i3 entry/exit code. With commit 87fc20e4 ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management"), this is no longer needed and the code can be cleaned up. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Keyon Jie <yang.jie@intel.com> Link: https://lore.kernel.org/r/20210322143830.3880293-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
- 22 Mar, 2021 4 commits
-
-
Keyon Jie authored
We should use the topology configured mclk if it existed, which can make sure we are aligned with the FW side about the mclk usage. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
-
Keyon Jie authored
Add helper sof_dai_ssp_mclk to get the topology configured MCLK from a pcm_runtime, return 0 if it is not available, and error if the dai type is not SSP at the moment. Export the helper for external use, e.g. from machine drivers. Signed-off-by:
-
Shengjiu Wang authored
When there is power domain bind with bus clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk, then explicitly enable clock when using by pm_runtime_get(), if CONFIG_PM=n, then fsl_sai_runtime_resume will be explicitly called. Signed-off-by: -
Vijendar Mukunda authored
Add support for RT5682 codec in machine driver. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/1616118056-5506-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by:
-
- 19 Mar, 2021 16 commits
-
-
Mark Brown authored
Merge series "ASoC: tidyup error message timing" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark Indicating error message when failed case is very useful for debuging. In many case, it uses below style. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. I know many people have many opinion, but if function() indicates error message, we can get same and detail information without forgot, and it is better. This patch-set tidyup to do it. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } Kuninori Morimoto (14): ASoC: soc-pcm: indicate error message at soc_pcm_open() ASoC: soc-pcm: indicate error message at soc_pcm_hw_params() ASoC: soc-pcm: indicate error message at soc_pcm_prepare() ASoC: soc-pcm: indicate error message at dpcm_path_get() ASoC: soc-pcm: indicate error message at dpcm_be_dai_trigger() ASoC: soc-pcm: indicate error message at dpcm_apply_symmetry() ASoC: soc-pcm: indicate error message at dpcm_run_update_startup/shutdown() ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_startup() ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_hw_params() ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_prepare() ASoC: soc-pcm: don't indicate error message for soc_pcm_hw_free() ASoC: soc-pcm: don't indicate error message for dpcm_be_dai_hw_free() ASoC: don't indicate error message for snd_soc_[pcm_]dai_xxx() ASoC: don't indicate error message for snd_soc_[pcm_]component_xxx() include/sound/soc-dpcm.h | 2 +- sound/soc/soc-compress.c | 9 +- sound/soc/soc-core.c | 22 +---- sound/soc/soc-dapm.c | 24 ++--- sound/soc/soc-pcm.c | 197 +++++++++++++++++++-------------------- 5 files changed, 108 insertions(+), 146 deletions(-) -- 2.25.1 -
Wei Yongjun authored
The sparse tool complains as follows: sound/soc/codecs/rt1019.c:927:19: warning: symbol 'rt1019_i2c_driver' was not declared. Should it be static? This symbol is not used outside of rt1019.c, so this commit marks it static. Fixes: 7ec79d38 ("ASoC: rt1019: add rt1019 amplifier driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210319094102.4185096-1-weiyongjun1@huawei.comSigned-off-by:
-
Kuninori Morimoto authored
All snd_soc_component_xxx() and snd_soc_pcm_component_xxx() itself indicate error message if failed. Its caller doesn't need to indicate duplicated error message. This patch removes it. All snd_soc_component_xxx() indicate error message if failed. Its caller doesn't need to indicate duplicated error message. This patch removes it. Signed-off-by:
-
Kuninori Morimoto authored
All snd_soc_dai_xxx() and snd_soc_pcm_dai_xxx() itself indicate error message if failed. Its caller doesn't need to indicate duplicated error message. This patch removes it. Signed-off-by:
-
Kuninori Morimoto authored
dpcm_be_dai_hw_free() never fail, error message is not needed. Signed-off-by:
-
Kuninori Morimoto authored
soc_pcm_hw_free() never fail, error message is not needed. We can't use void function for it, because it is used part of struct snd_pcm_ops :: hw_free. Signed-off-by:
-
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch follow above style at dpcm_fe/be_dai_prepare() Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch follow above style at dpcm_fe/be_dai_hw_params() Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch follow above style at dpcm_fe/be_dai_startup(). Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch also do below to dpcm_run_update_startup() 1) remove duplicated ret = -EINVAL 2) remove blank line do below to dpcm_run_update_shutdown() 1) remove unused ret Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch follow above style at dpcm_apply_symmetry(...) Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } Now, dpcm_be_dai_trigger() user uses it like below. err = dpcm_be_dai_trigger(...); if (err < 0) dev_err(..., "ASoC: trigger FE failed %d\n", err); But we can get more detail information if dpcm_be_dai_trigger() itself had dev_err(). And above error message is confusable, failed is *BE*, not *FE*. This patch indicates error message at dpcm_be_dai_trigger(). Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } Now, many place uses dpcm_path_get() like below ret = dpcm_path_get(...); if (ret < 0) goto error; (A) else if (ret == 0) dev_dbg(...) But here, (A) part can be indicated at dpcm_path_get() not caller. It is simple and readable code. This patch do it. Small detail behaviors will be exchanged by this patch. 1) indicates debug info (= path numbers) if path > 0 case only (It was *always* indicated). 2) soc_dpcm_fe_runtime_update() is indicating error message for paths < 0 case, but it is already done at dpcm_path_get(). Thus just remove it. but dev_dbg() vs dev_warn() is exchanged. Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch follow above style at soc_pcm_prepare(). By this patch, dpcm_fe/be_dai_prepare(...) temporary lacks FE/BE error info, but it will reborn soon. Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch follow above style at soc_pcm_hw_params(). By this patch, dpcm_fe/be_dai_hw_params(...) temporary lacks FE/BE error info, but it will reborn soon. Signed-off-by: -
Kuninori Morimoto authored
Indicating error message when failed case is very useful for debuging. In many case, its style is like below. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. If function() indicates error message, we can get same and detail information without forgot. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } This patch follow above style at soc_pcm_open(). By this patch, dpcm_fe/be_dai_startup(...) temporary lacks FE/BE error info, but it will reborn soon. Signed-off-by:
-
- 18 Mar, 2021 1 commit
-
-
Mark Brown authored
Merge series "ASoC: codecs: remove cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Lots of small fixes in various codec drivers that should have no functional impact. Pierre-Louis Bossart (23): ASoC: ab8500-codec: remove useless structure ASoC: ad1836: remove useless return ASoC: adau1977: remove useless return ASoC: cros_ec_codec: remove null pointer dereference warning ASoC: cx2070x: remove useless assignment ASoC: cx2070x: remove duplicate else branch ASoC: da7219-aad: remove useless initialization ASoC: hdac_hdmi: remove useless initializations ASoC: hdac_hdmi: align function arguments ASoC: hdmi-codec: remove useless initialization ASoC: hdmi-codec: remove unused spk_mask member ASoC: max98090: remove useless assignment ASoC: mt6358: remove useless initializations ASoC: mt6359: remove useless assignment ASoC: nau8825: remove useless assignment ASoC: pcm1681: remove useless assignment ASoC: sigmadsp: align function prototype ASoC: sti-sas: remove unused struct members ASoC: tas2562: remove useless assignment ASoC: tas2562: remove warning on return value ASoC: tas2770: remove useless initialization ASoC: tlv320dac33: clarify expression ASoC: tscs454: remove useless test on PLL disable sound/soc/codecs/ab8500-codec.c | 7 ------- sound/soc/codecs/ad1836.c | 2 -- sound/soc/codecs/adau1977.c | 2 -- sound/soc/codecs/cros_ec_codec.c | 2 +- sound/soc/codecs/cx2072x.c | 11 ++++------- sound/soc/codecs/da7219-aad.c | 2 +- sound/soc/codecs/hdac_hdmi.c | 14 +++++++------- sound/soc/codecs/hdac_hdmi.h | 2 +- sound/soc/codecs/hdmi-codec.c | 3 +-- sound/soc/codecs/max98090.c | 2 +- sound/soc/codecs/mt6358.c | 4 ++-- sound/soc/codecs/mt6359.c | 4 ++-- sound/soc/codecs/nau8825.c | 2 +- sound/soc/codecs/pcm1681.c | 2 +- sound/soc/codecs/sigmadsp.h | 2 +- sound/soc/codecs/sti-sas.c | 3 --- sound/soc/codecs/tas2562.c | 3 +-- sound/soc/codecs/tas2770.c | 2 +- sound/soc/codecs/tlv320dac33.c | 2 +- sound/soc/codecs/tscs454.c | 7 ++++++- 20 files changed, 32 insertions(+), 46 deletions(-) -- 2.25.1
-
