- 13 Jan, 2023 33 commits
-
-
Peter Zijlstra authored
Per commit 56e62a73 ("s390: convert to generic entry") the last and only callers of trace_hardirqs_{on,off}_caller() went away, clean up. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230112195541.355283994@infradead.org
-
Peter Zijlstra authored
objtool found cases where ACPI methods called out into instrumentation code: vmlinux.o: warning: objtool: io_idle+0xc: call to __inb.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_idle_enter+0xfe: call to num_online_cpus() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_idle_enter+0x115: call to acpi_idle_fallback_to_c1.isra.0() leaves .noinstr.text section Fix this by: marking the IO in/out, acpi_idle_fallback_to_c1() and num_online_cpus() methods as __always_inline. Signed-off-by:
Tony Lindgren <tony@atomide.com> Tested-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195541.294846301@infradead.org
-
Peter Zijlstra authored
objtool found that the mds_idle_clear_cpu_buffers() method got uninlined by the compiler where it called out into instrumentation: vmlinux.o: warning: objtool: mwait_idle+0x47: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xa2: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0x91: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0x8c: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0xaa: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section Solve this by marking mds_idle_clear_cpu_buffers() as __always_inline. Signed-off-by:
-
Peter Zijlstra authored
objtool found a few cases where this code called out into instrumented code: vmlinux.o: warning: objtool: acpi_idle_enter_s2idle+0xde: call to wbinvd() leaves .noinstr.text section vmlinux.o: warning: objtool: default_idle+0x4: call to arch_safe_halt() leaves .noinstr.text section vmlinux.o: warning: objtool: xen_safe_halt+0xa: call to HYPERVISOR_sched_op.constprop.0() leaves .noinstr.text section Solve this by: - marking arch_safe_halt(), wbinvd(), native_wbinvd() and HYPERVISOR_sched_op() as __always_inline(). - Explicitly uninlining xen_safe_halt() and pv_native_wbinvd() [they were already uninlined by the compiler on use as function pointers] and annotating them as 'noinstr'. - Annotating pv_native_safe_halt() as 'noinstr'. Signed-off-by:
Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Reviewed-by:
Juergen Gross <jgross@suse.com> Acked-by:
-
Peter Zijlstra authored
objtool found a few cases where this code called out into instrumented code: vmlinux.o: warning: objtool: __halt+0x2c: call to hcall_func.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: __halt+0x3f: call to __tdx_hypercall() leaves .noinstr.text section vmlinux.o: warning: objtool: __tdx_hypercall+0x66: call to __tdx_hypercall_failed() leaves .noinstr.text section Fix it by: - moving TDX tdcall assembly methods into .noinstr.text (they are already noistr-clean) - marking __tdx_hypercall_failed() as 'noinstr' - annotating hcall_func() as __always_inline Signed-off-by:
-
Peter Zijlstra authored
objtool found a few cases where this code called out into instrumented code: vmlinux.o: warning: objtool: intel_idle_s2idle+0x6e: call to __monitor.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0x8c: call to __monitor.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0x73: call to __monitor.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: mwait_idle+0x88: call to clflush() leaves .noinstr.text section Fix it by marking the affected methods as __always_inline. Signed-off-by:
-
Peter Zijlstra authored
objtool pointed out that various idle-TIF management methods have instrumentation: vmlinux.o: warning: objtool: mwait_idle+0x5: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xc5: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0xbc: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0xea: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0xb4: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0xa6: call to current_clr_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0xbf: call to current_clr_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0xa1: call to current_clr_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: mwait_idle+0xe: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xc5: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0xbc: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0xea: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0xb4: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0x73: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0x91: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0x78: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_safe_halt+0xf: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section Remove the instrumentation, because these methods are used in low-level cpuidle code moving between states, that should not be instrumented. Signed-off-by:
-
Peter Zijlstra authored
No callers left that have already disabled RCU. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
-
Peter Zijlstra authored
The problem, per commit fc98c3c8 ("printk: use rcuidle console tracepoint"), was printk usage from the cpuidle path where RCU was already disabled. Per the patches earlier in this series, this is no longer the case. Signed-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by:
Petr Mladek <pmladek@suse.com> Acked-by:
-
Peter Zijlstra authored
Ever since commit d3afc7f1 ("arm64: Allow IPIs to be handled as normal interrupts") this function is called in regular IRQ context. Signed-off-by:
Marc Zyngier <maz@kernel.org> Acked-by:
-
Peter Zijlstra authored
None of these functions should ever be ran with RCU disabled anymore. Specifically, do_handle_IPI() is only called from handle_IPI() which explicitly does irq_enter()/irq_exit() which ensures RCU is watching. The problem with smp_cross_call() was, per commit description: 7c64cc05 ("arm: Use _rcuidle for smp_cross_call() tracepoints") ... that cpuidle_enter_state_coupled() already had RCU disabled, but that's long been fixed by commit: 1098582a ("sched,idle,rcu: Push rcu_idle deeper into the idle path") Signed-off-by:
-
Peter Zijlstra authored
Now that arch_cpu_idle() is expected to return with IRQs disabled, avoid the useless STI/CLI dance. Per the specs this is supposed to work, but nobody has yet relied up this behaviour so broken implementations are possible. Signed-off-by:
-
Peter Zijlstra authored
Current arch_cpu_idle() is called with IRQs disabled, but will return with IRQs enabled. However, the very first thing the generic code does after calling arch_cpu_idle() is raw_local_irq_disable(). This means that architectures that can idle with IRQs disabled end up doing a pointless 'enable-disable' dance. Therefore, push this IRQ disabling into the idle function, meaning that those architectures can avoid the pointless IRQ state flipping. Signed-off-by:
Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64] Acked-by:
Guo Ren <guoren@kernel.org> Acked-by:
-
Peter Zijlstra authored
objtool to the rescue: vmlinux.o: warning: objtool: intel_idle_ibrs+0x17: call to spec_ctrl_current() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_ibrs+0x27: call to wrmsrl.constprop.0() leaves .noinstr.text section Signed-off-by:
-
Peter Zijlstra authored
Fix instrumentation bugs objtool found: vmlinux.o: warning: objtool: intel_idle_s2idle+0xd5: call to fpu_idle_fpregs() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_xstate+0x11: call to fpu_idle_fpregs() leaves .noinstr.text section vmlinux.o: warning: objtool: fpu_idle_fpregs+0x9: call to xfeatures_in_use() leaves .noinstr.text section Signed-off-by:
-
Peter Zijlstra authored
So objtool found this bug: vmlinux.o: warning: objtool: intel_idle_irq+0x10c: call to trace_hardirqs_off() leaves .noinstr.text section As per commit 32d4fd57 ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE"): "must not have tracing in idle functions" Clearly people can't read and tinker along until splat dissapears. This straight up reverts commit d295ad34 ("intel_idle: Fix false positive RCU splats due to incorrect hardirqs state"). It doesn't re-introduce the problem because preceding patches fixed it properly. Fixes: d295ad34 ("intel_idle: Fix false positive RCU splats due to incorrect hardirqs state") Signed-off-by:
-
Peter Zijlstra authored
Idle code is very like entry code in that RCU isn't available. As such, add a little validation. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Peter Zijlstra authored
The __cpuidle functions will become a noinstr class, as such they need explicit annotations. Signed-off-by:
-
Peter Zijlstra authored
All the idle routines are called with RCU disabled, as such there must not be any tracing inside. While there; clean-up the io-port idle thing. Signed-off-by:
-
Peter Zijlstra authored
All callers should still have RCU enabled. Signed-off-by:
-
Peter Zijlstra authored
The whole disable-RCU, enable-IRQS dance is very intricate since changing IRQ state is traced, which depends on RCU. Add two helpers for the cpuidle case that mirror the entry code: ct_cpuidle_enter() ct_cpuidle_exit() And fix all the cases where the enter/exit dance was buggy. Signed-off-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then temporarily enable it again before going idle is suboptimal. Notably: this converts all dt_init_idle_driver() and __CPU_PM_CPU_IDLE_ENTER() users for they are inextrably intertwined. Signed-off-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then temporarily enable it again, some *four* times, before going idle is suboptimal. Notably three times explicitly using RCU_NONIDLE() and once implicitly through cpu_pm_*(). Signed-off-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then temporarily enable it again before going idle is suboptimal. Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit. Signed-off-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then teporarily enable it again before going idle is suboptimal. Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit. Signed-off-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then temporarily enable it again, at least twice, before going idle is suboptimal. Notably both cpu_pm_enter() and cpu_cluster_pm_enter() implicity re-enable RCU. Signed-off-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then temporarily enable it again, at least twice, before going idle is suboptimal. Notably once implicitly through the cpu_pm_*() calls and once explicitly doing ct_irq_*_irqon(). Signed-off-by:
Kajetan Puchalski <kajetan.puchalski@arm.com> Tested-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then temporarily enable it again, at least twice, before going idle is suboptimal. Notably once implicitly through the cpu_pm_*() calls and once explicitly doing RCU_NONIDLE(). Signed-off-by:
-
Peter Zijlstra authored
Doing RCU-idle outside the driver, only to then temporarily enable it again, at least twice, before going idle is suboptimal. That is, once implicitly through the cpu_pm_*() calls and once explicitly doing ct_irq_*_irqon(). Signed-off-by:
Anup Patel <anup@brainfault.org> Reviewed-by:
-
Peter Zijlstra authored
Make cpuidle_enter_state() consistent with the s2idle variant and verify ->enter() always returns with interrupts disabled. Signed-off-by:
-
Peter Zijlstra authored
Make cpuidle_state::enter() methods IRQ state invariant on exit. Additionally make sure to use raw_local_irq_*() methods since this cpuidle callback will be called with RCU already disabled. Signed-off-by:
-
Peter Zijlstra authored
Typical boot time setup; no need to suffer an indirect call for that. Signed-off-by:
-
Peter Zijlstra authored
The perf_lopwr_cb() function is called from the idle routines; there is no RCU there, we must not enter tracing. Use __always_inline, noidle annotations and existing no-trace methods. Signed-off-by:
-
- 12 Jan, 2023 2 commits
-
-
Mathieu Desnoyers authored
Two new auxiliary vector entries are introduced for rseq without matching increment of the AT_VECTOR_SIZE_BASE, which causes failures with CONFIG_HARDENED_USERCOPY=y. Fixes: 317c8194 ("rseq: Introduce feature size and alignment ELF auxiliary vector entries") Reported-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Mathieu Desnoyers authored
The mm_numa_cid related rseq patches from the series were not picked up into the tip tree, so enabling the mm_numa_cid test needs to be reverted. This reverts commit b344b8f2. Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
-
- 11 Jan, 2023 1 commit
-
-
Ingo Molnar authored
The following commit: c8997020 ("cputime: remove cputime_to_nsecs fallback") Removed an <asm/cputime.h> inclusion from <linux/sched/cputime.h>, but this broke the IA64 build: arch/ia64/kernel/time.c:110:6: warning: no previous prototype for 'arch_vtime_task_switch' [-Wmissing-prototypes] Add in the missing <asm/cputime.h> header to fix it. Fixes: c8997020 ("cputime: remove cputime_to_nsecs fallback") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 07 Jan, 2023 4 commits
-
-
Michal Clapinski authored
Keep track of previously issued registrations and compare the result with MEMBARRIER_CMD_GET_REGISTRATIONS return value. Signed-off-by:
Michal Clapinski <mclapinski@google.com> Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20221207164338.1535591-3-mclapinski@google.com
-
Michal Clapinski authored
Provide a method to query previously issued registrations. Signed-off-by:
-
Lukasz Luba authored
The max CPU capacity is the same for all CPUs sharing frequency domain. There is a way to avoid heavy operations in a loop for each CPU by leveraging this knowledge. Thus, simplify the looping code in the sugov_next_freq_shared() and drop heavy multiplications. Instead, use simple max() to get the highest utilization from these CPUs. This is useful for platforms with many (4 or 6) little CPUs. We avoid heavy 2*PD_CPU_NUM multiplications in that loop, which is called billions of times, since it's not limited by the schedutil time delta filter in sugov_should_update_freq(). When there was no need to change frequency the code bailed out, not updating the sg_policy::last_freq_update_time. Then every visit after delta_ns time longer than the sg_policy::freq_update_delay_ns goes through and triggers the next frequency calculation code. Although, if the next frequency, as outcome of that, would be the same as current frequency, we won't update the sg_policy::last_freq_update_time and the story will be repeated (in a very short period, sometimes a few microseconds). The max CPU capacity must be fetched every time we are called, due to difficulties during the policy setup, where we are not able to get the normalized CPU capacity at the right time. The fetched CPU capacity value is than used in sugov_iowait_apply() to calculate the right boost. This required a few changes in the local functions and arguments. The capacity value should hopefully be fetched once when needed and then passed over CPU registers to those functions. Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Signed-off-by:
-
Chengming Zhou authored
ttwu_do_activate() is used for a complete wakeup, in which we will activate_task() and use ttwu_do_wakeup() to mark the task runnable and perform wakeup-preemption, also call class->task_woken() callback and update the rq->idle_stamp. Since ttwu_runnable() is not a complete wakeup, don't need all those done in ttwu_do_wakeup(), so we can move those to ttwu_do_activate() to simplify ttwu_do_wakeup(), making it only mark the task runnable to be reused in ttwu_runnable() and try_to_wake_up(). This patch should not have any functional changes. Suggested-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
-
