Skip to content

L
linux
Switch branch/tag
  1. 03 Aug, 2020 9 commits
    • Stephen Boyd's avatar
      Merge branches 'clk-microchip', 'clk-mmp', 'clk-unused' and 'clk-at91' into clk-next · dd9c697a
      Stephen Boyd authored 
       - Add support for SAMA7G5 SoC clks
 - Microchip Sparx5 DPLL clk

* clk-microchip:
  clk: sparx5: Add Sparx5 SoC DPLL clock driver
  dt-bindings: clock: sparx5: Add bindings include file

* clk-mmp:
  clk: mmp: avoid missing prototype warning

* clk-unused:
  clk: drop unused function __clk_get_flags

* clk-at91:
  clk: at91: sama7g5: add clock support for sama7g5
  clk: at91: clk-utmi: add utmi support for sama7g5
  clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs
  clk: at91: add macro for pll ids mask
  clk: at91: clk-programmable: add mux_table option
  clk: at91: clk-peripheral: add support for changeable parent rate
  clk: at91: clk-master: add master clock support for SAMA7G5
  clk: at91: clk-generated: add mux_table option
  clk: at91: clk-generated: pass the id of changeable parent at registration
  clk: at91: replace conditional operator with double logical not
  clk: at91: sckc: register slow_rc with accuracy option
  clk: at91: sam9x60: fix main rc oscillator frequency
  clk: at91: sam9x60-pll: use frac when setting frequency
  clk: at91: sam9x60-pll: check fcore against ranges
  clk: at91: sam9x60-pll: use logical or for range check
  clk: at91: clk-sam9x60-pll: fix mul mask
  clk: at91: clk-generated: check best_rate against ranges
  clk: at91: clk-generated: continue if __clk_determine_rate() returns error
  clk: at91: fix possible dead lock in new drivers
      dd9c697a
    • Stephen Boyd's avatar
      Merge branches 'clk-fallthru', 'clk-ingenic', 'clk-tegra', 'clk-sirf' and 'clk-qoriq' into clk-next · 1a91e318
      Stephen Boyd authored 
       - Add RTC related clks on Ingenic SoCs
 - Support USB PHY clks on Ingenic SoCs

* clk-fallthru:
  clk: davinci: Use fallthrough pseudo-keyword
  clk: imx: Use fallthrough pseudo-keyword

* clk-ingenic:
  clk: X1000: Add support for calculat REFCLK of USB PHY.
  clk: JZ4780: Reformat the code to align it.
  clk: JZ4780: Add functions for enable and disable USB PHY.
  clk: Ingenic: Add RTC related clocks for Ingenic SoCs.
  dt-bindings: clock: Add tabs to align code.
  dt-bindings: clock: Add RTC related clocks for Ingenic SoCs.

* clk-tegra:
  clk: tegra: pll: Improve PLLM enable-state detection

* clk-sirf:
  clk: clk-atlas6: fix return value check in atlas6_clk_init()

* clk-qoriq:
  clk: qoriq: add LS1021A core pll mux options
      1a91e318
    • Stephen Boyd's avatar
      Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and... · 53e07424
      Stephen Boyd authored 
      Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and 'clk-debugfs' into clk-next

 - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs

* clk-actions:
  MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
  clk: actions: Add Actions S500 SoC Reset Management Unit support
  dt-bindings: reset: Add binding constants for Actions S500 RMU
  clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
  dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
  clk: actions: Fix h_clk for Actions S500 SoC

* clk-rockchip:
  clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
  clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"
  clk: rockchip: use separate compatibles for rk3288w-cru
  dt-bindings: clocks: add rk3288w variant compatible
  clk: rockchip: Handle clock tree for rk3288w variant
  clk: rockchip: convert rk3036 pll type to use internal lock status
  clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout
  clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout

* clk-iproc:
  clk: iproc: round clock rate to the closest

* clk-intel:
  clk: intel: Avoid unnecessary memset by improving code
  clk: intel: Improve locking in the driver
  clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()

* clk-debugfs:
  clk: Add support for enabling/disabling clocks from debugfs
      53e07424
    • Stephen Boyd's avatar
      Merge branches 'clk-https', 'clk-renesas', 'clk-kconfig', 'clk-amlogic' and 'clk-imx' into clk-next · 987106e5
      Stephen Boyd authored 
      * clk-https:
  Replace HTTP links with HTTPS ones: Common CLK framework

* clk-renesas:
  clk: renesas: cpg-mssr: Add r8a774e1 support
  dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
  clk: renesas: Add r8a774e1 CPG Core Clock Definitions
  dt-bindings: power: Add r8a774e1 SYSC power domain definitions
  clk: renesas: rzg2: Mark RWDT clocks as critical
  clk: renesas: rcar-gen3: Mark RWDT clocks as critical
  clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot
  dt-bindings: clock: renesas: cpg: Convert to json-schema

* clk-kconfig:
  clk: hsdk: Fix bad dependency on IOMEM
  clk: Specify IOMEM dependency for HSDK pll driver
  clk: Drop duplicate selection in Kconfig
  clk: AST2600: Add mux for EMMC clock
  clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER

* clk-amlogic:
  clk: meson: meson8b: add the vclk2_en gate clock
  clk: meson: meson8b: add the vclk_en gate clock
  clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
  clk: meson: g12a: Add support for NNA CLK source clocks
  dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs

* clk-imx:
  clk: imx: vf610: add CAAM clock
  clk: imx8mp: add mu root clk
      987106e5
    • Stephen Boyd's avatar
      Merge branches 'clk-socfpga', 'clk-doc', 'clk-qcom', 'clk-vc5' and 'clk-bcm' into clk-next · c63e2a7a
      Stephen Boyd authored 
       - Enable CPU clks on Qualcomm IPQ6018 SoCs
 - Enable CPU clks on Qualcomm MSM8996 SoCs
 - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
 - Audio clks on Qualcomm SC7180 SoCs
 - Make defines for bcm63xx-gate clks to use in DT
 - Support gate clks on BCM6318 SoCs
 - Add HDMI clks for BCM2711 SoCs
 - Support BCM2711 SoC firmware clks

* clk-socfpga:
  clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clk
  clk: socfpga: agilex: add nand_x_clk and nand_ecc_clk
  dt-bindings: agilex: add NAND_X_CLK and NAND_ECC_CLK

* clk-doc:
  clk: Clean up kernel-doc errors
  clk: <linux/clk-provider.h>: drop a duplicated word
  clk: add function documentation for clk_hw_round_rate()

* clk-qcom: (38 commits)
  dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180
  clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk
  clk: qcom: gcc-sdm660: Add missing modem reset
  clk: qcom: lpass: Add support for LPASS clock controller for SC7180
  clk: qcom: gcc: Add support for GCC LPASS clock for SC7180
  dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
  clk: qcom: gdsc: Add support to enable retention of GSDCR
  clk: qcom: Export gdsc_gx_do_nothing_enable() to modules
  clk: qcom: Add graphics clock controller driver for SM8250
  clk: qcom: Add graphics clock controller driver for SM8150
  clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
  dt-bindings: clock: add SM8250 QCOM Graphics clock bindings
  dt-bindings: clock: add SM8150 QCOM Graphics clock bindings
  dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc
  clk: qcom: gcc: remove unnecessary vco_table from SM8150
  clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll
  clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid
  clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
  clk: qcom: gcc: fix sm8150 GPU and NPU clocks
  dt-bindings: clock: Fix qcom,msm8996-apcc yaml syntax
  ...

* clk-vc5:
  clk: vc5: use a dedicated struct to describe the output drivers
  dt-bindings: clk: versaclock5: convert to yaml
  MAINTAINERS: take over IDT VersaClock 5 clock driver
  dt-bindings: clk: versaclock5: fix 'idt' prefix typos
  clk: vc5: Add memory check to prevent oops
  clk: vc5: fix use of memory after it has been kfree'd
  clk: vc5: Enable addition output configurations of the Versaclock
  dt: Add additional option bindings for IDT VersaClock
  clk: vc5: Allow Versaclock driver to support multiple instances

* clk-bcm: (44 commits)
  clk: bcm2835: Do not use prediv with bcm2711's PLLs
  dt-bindings: arm: bcm: Add a select to the RPI Firmware binding
  clk: bcm: dvp: Add missing module informations
  clk: bcm: rpi: Remove the quirks for the CPU clock
  clk: bcm2835: Don't cache the PLLB rate
  clk: bcm2835: Allow custom CCF flags for the PLLs
  Revert "clk: bcm2835: remove pllb"
  clk: bcm: rpi: Give firmware clocks a name
  clk: bcm: rpi: Discover the firmware clocks
  clk: bcm: rpi: Add an enum for the firmware clocks
  clk: bcm: rpi: Add DT provider for the clocks
  clk: bcm: rpi: Make the PLLB registration function return a clk_hw
  clk: bcm: rpi: Split pllb clock hooks
  clk: bcm: rpi: Rename is_prepared function
  clk: bcm: rpi: Pass the clocks data to the firmware function
  clk: bcm: rpi: Add clock id to data
  clk: bcm: rpi: Create a data structure for the clocks
  clk: bcm: rpi: Use CCF boundaries instead of rolling our own
  clk: bcm: rpi: Make sure the clkdev lookup is removed
  clk: bcm: rpi: Switch to clk_hw_register_clkdev
  ...
      c63e2a7a
    • Nicolas Saenz Julienne's avatar
      clk: bcm2835: Do not use prediv with bcm2711's PLLs · f34e4651
      Nicolas Saenz Julienne authored 
      Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask when running on
bcm2711.

Note that, since the prediv configuration bits were re-purposed, this
was triggering miscalculations on all clocks hanging from the VPU clock,
notably the aux UART, making its output unintelligible.

Fixes: 42de9ad4 ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: default avatarNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: default avatarNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.deTested-by: default avatarNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
      f34e4651
    • Julia Lawall's avatar
      clk: drop unused function __clk_get_flags · 6cfde884
      Julia Lawall authored 
      The function __clk_get_flags has not been used since the April 2019
commit a348f053 ("ARM: omap2+: hwmod: drop CLK_IS_BASIC
flag usage").  Other uses were removed in June 2015, eg by
commit 98d8a60e ("clk: Convert __clk_get_flags() to
clk_hw_get_flags()"), which shows how clk_hw_get_flags can easily
be used instead.
Signed-off-by: default avatarJulia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1596272022-14173-1-git-send-email-Julia.Lawall@inria.frSigned-off-by: default avatarStephen Boyd <sboyd@kernel.org>
      6cfde884
    • Geert Uytterhoeven's avatar
      clk: hsdk: Fix bad dependency on IOMEM · bd8548d0
      Geert Uytterhoeven authored 
      CONFIG_IOMEM does not exist.  The correct symbol to depend on is
CONFIG_HAS_IOMEM.

Fixes: 1e7468bd ("clk: Specify IOMEM dependency for HSDK pll driver")
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200803084835.21838-1-geert+renesas@glider.beSigned-off-by: default avatarStephen Boyd <sboyd@kernel.org>
      bd8548d0
    • Stephen Boyd's avatar
      Merge branch 'clk-fixes' into clk-kconfig · ba857b21
      Stephen Boyd authored 
      Need to merge this up to get the IOMEM dependency patch on top that is
broken and fixed in the next commit.

* clk-fixes:
  clk: Specify IOMEM dependency for HSDK pll driver
  clk: AST2600: Add mux for EMMC clock
  clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
      ba857b21
  3. 31 Jul, 2020 1 commit
  5. 29 Jul, 2020 3 commits
  7. 28 Jul, 2020 9 commits
  9. 27 Jul, 2020 4 commits
  11. 24 Jul, 2020 14 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7