- 14 Jul, 2022 40 commits
-
-
Sean Christopherson authored
Remove a spurious closing paranthesis and tweak the comment about the cache capacity for PTE descriptors (rmaps) eager page splitting to tone down the assertion slightly, and to call out that topup requires dropping mmu_lock, which is the real motivation for avoiding topup (as opposed to memory usage). Cc: David Matlack <dmatlack@google.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220712020724.1262121-4-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Tweak the comment above the computation of the quadrant for PG_LEVEL_4K shadow pages to explicitly call out how and why KVM uses role.quadrant to consume gPTE bits. Opportunistically wrap an unnecessarily long line. No functional change intended. Link: https://lore.kernel.org/all/YqvWvBv27fYzOFdE@google.comReviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
Sean Christopherson authored
Add spte_index() to dedup all the code that calculates a SPTE's index into its parent's page table and/or spt array. Opportunistically tweak the calculation to avoid pointer arithmetic, which is subtle (subtract in 8-byte chunks) and less performant (requires the compiler to generate the subtraction). Suggested-by:
-
Sean Christopherson authored
Update the Processor Trace (PT) MSR intercepts during a filter change if and only if PT may be exposed to the guest, i.e. only if KVM is operating in the so called "host+guest" mode where PT can be used simultaneously by both the host and guest. If PT is in system mode, the host is the sole owner of PT and the MSRs should never be passed through to the guest. Luckily the missed check only results in unnecessary work, as select RTIT MSRs are passed through only when RTIT tracing is enabled "in" the guest, and tracing can't be enabled in the guest when KVM is in system mode (writes to guest.MSR_IA32_RTIT_CTL are disallowed). Cc: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20220712015838.1253995-1-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Drop SVM_CPUID_FUNC to reduce the probability of tests open coding CPUID checks instead of using kvm_cpu_has() or this_cpu_has(). Signed-off-by:
-
Sean Christopherson authored
Use cpuid() to get CPUID.0x0 in cpu_vendor_string_is(), thus eliminating the last open coded usage of CPUID (ignoring debug_regs.c, which emits CPUID from the guest to trigger a VM-Exit and doesn't actually care about the results of CPUID). Signed-off-by:
-
Sean Christopherson authored
Provide informative error messages for the various checks related to requesting access to XSAVE features that are buried behind XSAVE Feature Disabling (XFD). Opportunistically rename the helper to have "require" in the name so that it's somewhat obvious that the helper may skip the test. Signed-off-by:
-
Sean Christopherson authored
Skip the AMX test instead of silently returning if the host kernel doesn't support ARCH_REQ_XCOMP_GUEST_PERM. KVM didn't support XFD until v5.17, so it's extremely unlikely allowing the test to run on a pre-v5.15 kernel is the right thing to do. Signed-off-by:
-
Sean Christopherson authored
Use kvm_cpu_has() to check for XFD supported in vm_xsave_req_perm(), simply checking host CPUID doesn't guarantee KVM supports AMX/XFD. Opportunistically hoist the check above the bit check; if XFD isn't supported, it's far better to get a "not supported at all" message, as opposed to a "feature X isn't supported" message". Signed-off-by:
-
Sean Christopherson authored
Make the "get max CPUID leaf" helpers static inline, there's no reason to bury the one liners in processor.c. Signed-off-by:
-
Sean Christopherson authored
Rename kvm_get_supported_cpuid_index() to __kvm_get_supported_cpuid_entry() to better show its relationship to kvm_get_supported_cpuid_entry(), and because the helper returns a CPUID entry, not the index of an entry. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use kvm_get_supported_cpuid_entry() instead of kvm_get_supported_cpuid_index() when passing in '0' for the index, which just so happens to be the case in all remaining users of kvm_get_supported_cpuid_index() except kvm_get_supported_cpuid_entry(). Keep the helper as there may be users in the future, and it's not doing any harm. Signed-off-by:
-
Sean Christopherson authored
Replace an evil open coded instance of querying CPUID from L1 with this_cpu_has(X86_FEATURE_SVM). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use this_cpu_has() to query OSXSAVE from the L1 guest in the CR4=>CPUID sync test. Signed-off-by:
-
Sean Christopherson authored
Add this_cpu_has() to query an X86_FEATURE_* via cpuid(), i.e. to query a feature from L1 (or L2) guest code. Arbitrarily select the AMX test to be the first user. Signed-off-by:
-
Sean Christopherson authored
Set the function/index for CPUID in the helper instead of relying on the caller to do so. In addition to reducing the risk of consuming an uninitialized ECX, having the function/index embedded in the call makes it easier to understand what is being checked. Signed-off-by:
-
Sean Christopherson authored
Tag the returned CPUID pointers from kvm_get_supported_cpuid(), kvm_get_supported_hv_cpuid(), and vcpu_get_supported_hv_cpuid() "const" to prevent reintroducing the broken pattern of modifying the static "cpuid" variable used by kvm_get_supported_cpuid() to cache the results of KVM_GET_SUPPORTED_CPUID. Update downstream consumers as needed. Signed-off-by:
-
Sean Christopherson authored
Add X86_FEATURE_X2APIC and use vcpu_clear_cpuid_feature() to clear x2APIC support in the xAPIC state test. Signed-off-by:
-
Sean Christopherson authored
Use vcpu_{set,clear}_cpuid_feature() to toggle nested VMX support in the vCPU CPUID module in the nVMX state test. Drop CPUID_VMX as there are no longer any users. Signed-off-by: -
Sean Christopherson authored
Use vcpu_get_cpuid_entry() instead of an open coded equivalent in the CPUID test. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use the vCPU's persistent CPUID array directly when manipulating the set of exposed Hyper-V CPUID features. Drop set_cpuid() to route all future modification through the vCPU helpers; the Hyper-V features test was the last user. Signed-off-by:
-
Sean Christopherson authored
Add a new helper, vcpu_clear_cpuid_entry(), to do a RMW operation on the vCPU's CPUID model to clear a given CPUID entry, and use it to clear KVM's paravirt feature instead of operating on kvm_get_supported_cpuid()'s static "cpuid" variable. This also eliminates a user of the soon-be-defunct set_cpuid() helper. Signed-off-by:
-
Sean Christopherson authored
Use vcpu_clear_cpuid_feature() to the MONITOR/MWAIT CPUID feature bit in the MONITOR/MWAIT quirk test. Signed-off-by: -
Sean Christopherson authored
Add a helper to set a vCPU's guest.MAXPHYADDR, and use it in the test that verifies the emulator returns an error on an unknown instruction when KVM emulates in response to an EPT violation with a GPA that is legal in hardware but illegal with respect to the guest's MAXPHYADDR. Add a helper even though there's only a single user at this time. Before its removal, mmu_role_test also stuffed guest.MAXPHYADDR, and the helper provides a small amount of clarity. More importantly, this eliminates a set_cpuid() user and an instance of modifying kvm_get_supported_cpuid()'s static "cpuid". Signed-off-by:
-
Sean Christopherson authored
Use vm->pa_bits to generate the mask of physical address bits that are reserved in page table entries. vm->pa_bits is set when the VM is created, i.e. it's guaranteed to be valid when populating page tables. Signed-off-by:
-
Sean Christopherson authored
Add helpers to get a specific CPUID entry for a given vCPU, and to toggle a specific CPUID-based feature for a vCPU. The helpers will reduce the amount of boilerplate code needed to tweak a vCPU's CPUID model, improve code clarity, and most importantly move tests away from modifying the static "cpuid" returned by kvm_get_supported_cpuid(). Signed-off-by:
-
Sean Christopherson authored
Use get_cpuid_entry() in kvm_get_supported_cpuid_index() to replace functionally identical code. Signed-off-by:
-
Sean Christopherson authored
Rename get_cpuid() to get_cpuid_entry() to better reflect its behavior. Leave set_cpuid() as is to avoid unnecessary churn, that helper will soon be removed entirely. Oppurtunistically tweak the implementation to avoid using a temporary variable in anticipation of taggin the input @cpuid with "const". No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Don't use a static variable for the Hyper-V supported CPUID array, the helper unconditionally reallocates the array on every invocation (and all callers free the array immediately after use). The array is intentionally recreated and refilled because the set of supported CPUID features is dependent on vCPU state, e.g. whether or not eVMCS has been enabled. Signed-off-by:
-
Sean Christopherson authored
Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the mess where tests, often unknowingly, modify the global/static "cpuid" allocated by kvm_get_supported_cpuid(). Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID model, e.g. during vCPU creation or when switching to the Hyper-V enabled CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that any adjustments made by KVM are always reflected in the cache. Drop vcpu_get_cpuid() entirely to force tests to use the cache, and to allow adding e.g. vcpu_get_cpuid_entry() in the future without creating a conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but vcpu_get_cpuid_entry() does not. Opportunistically convert the VMX nested state test and KVM PV test to manipulating the vCPU's CPUID (because it's easy), but use vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test to effectively retain their current behavior as they're less trivial to convert. Signed-off-by:
-
Sean Christopherson authored
Split out the computation of the effective size of a kvm_cpuid2 struct from allocate_kvm_cpuid2(), and modify both to take an arbitrary number of entries. Future commits will add caching of a vCPU's CPUID model, and will (a) be able to precisely size the entries array, and (b) will need to know the effective size of the struct in order to copy to/from the cache. Expose the helpers so that the Hyper-V Features test can use them in the (somewhat distant) future. The Hyper-V test very, very subtly relies on propagating CPUID info across vCPU instances, and will need to make a copy of the previous vCPU's CPUID information when it switches to using the per-vCPU cache. Alternatively, KVM could provide helpers to duplicate and/or copy a kvm_cpuid2 instance, but each is literally a single line of code if the helpers are exposed, and it's not like the size of kvm_cpuid2 is secret knowledge. Signed-off-by:
-
Sean Christopherson authored
In the CPUID test, verify that KVM doesn't modify the kvm_cpuid2.entries layout, i.e. that the order of entries and their flags is identical between what the test provides via KVM_SET_CPUID2 and what KVM returns via KVM_GET_CPUID2. Asserting that the layouts match simplifies the test as there's no need to iterate over both arrays. Signed-off-by:
-
Sean Christopherson authored
Use kvm_cpu_has() to query for NRIPS support instead of open coding equivalent functionality using kvm_get_supported_cpuid_entry(). Signed-off-by:
-
Sean Christopherson authored
Use kvm_cpu_has() in the stea-ltime test instead of open coding equivalent functionality using kvm_get_supported_cpuid_entry(). Opportunistically define all of KVM's paravirt CPUID-based features. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Remove the MMU role test, which was made obsolete by KVM commit feb627e8 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN"). The ongoing costs of keeping the test updated far outweigh any benefits, e.g. the test _might_ be useful as an example or for documentation purposes, but otherwise the test is dead weight. Signed-off-by:
-
Sean Christopherson authored
Use kvm_cpu_has() in the CR4/CPUID sync test instead of open coding equivalent functionality using kvm_get_supported_cpuid_entry(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use kvm_cpu_has() in the AMX test instead of open coding equivalent functionality using kvm_get_supported_cpuid_entry() and kvm_get_supported_cpuid_index(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Check for _both_ XTILE data and cfg support in the AMX test instead of checking for _either_ feature. Practically speaking, no sane CPU or vCPU will support one but not the other, but the effective "or" behavior is subtle and technically incorrect. Signed-off-by:
-
Sean Christopherson authored
Use kvm_cpu_has() in the XSS MSR test instead of open coding equivalent functionality using kvm_get_supported_cpuid_index(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop a redundant vcpu_set_cpuid() from the PMU test. The vCPU's CPUID is set to KVM's supported CPUID by vm_create_with_one_vcpu(), which was also true back when the helper was named vm_create_default(). Signed-off-by:
-
