- 02 Jul, 2013 26 commits
-
-
Wei Yongjun authored
Add missing .owner of struct pppox_proto. This prevents the module from being removed from underneath its users. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Wei Liu authored
Convert one printk to pr_<level>. Add a missing newline in several places to avoid message interleaving, coalesce formats, reflow modified lines to 80 columns. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Rami Rosen authored
This patch removes the fib_update_nh_saddrs() declaration from include/net/ip_fib.h, as the fib_update_nh_saddrs() method was removed in coomit 436c3b66 ("ipv4: Invalidate nexthop cache nh_saddr more correctly"). Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
Aaron Marburg authored
Adds the USB device ID (0x12ab) to the ipheth network-over-USB-tethering driver for iOS devices. Applied and tested against mainline tag v3.10 (as well as 3.8.x and 3.6.y kernel for Raspbian on Raspberry pi) Signed-off-by:
Aaron Marburg <amarburg@notetofutureself.org> Signed-off-by:
-
Daniel Borkmann authored
The header file checksum.h is missing proper defines that prevents it from double inclusion. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Borkmann authored
The TPACKET_V3 test code consists of a lot of unecessary macro wrappers that rather obfuscate what members are accessed in what way. So get rid of them and make the code more readable. Also credit Chetan for providing tpacket_v3 example code. Furthermore, get rid of private offset usage, as we do not need it here. Signed-off-by:
-
Michal Schmidt authored
As the patch "bnx2x: remove zeroing of dump data buffer" showed, it is too easy implement .get_dump_data incorrectly in a driver. Let's make sure drivers cannot get confused by userspace requesting a too big dump. Also WARN if the driver sets dump->len to something weird and make sure the length reported to userspace is the actual length of data copied to userspace. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Michal Schmidt authored
bnx2x did not set dump->version in its .get_dump_flag() method. Let's set it to BNX2X_DUMP_VERSION. It's not a particularly nice number (0x50acff01 currently), but at least it's something deterministic. dump->flag should report the value previously set using ethtool -W. Signed-off-by:
-
Michal Schmidt authored
bnx2x interprets the dump flag as an index of a register preset. It is important to validate the index to avoid out of bounds memory accesses. Signed-off-by:
-
Michal Schmidt authored
There is no need to initialize the dump data with zeros. data is allocated with vzalloc, so it's already zero-filled. More importantly, the memset is harmful, because dump->len (the length requested by userspace) can be bigger than the allocated buffer (whose size is determined by asking the driver's .get_dump_flag method). Signed-off-by:
-
Daniel Borkmann authored
After having reworked the debugging framework, Neil and Vlad agreed to get rid of the leftover SCTP_DBG_TSNS code for a couple of reasons: We can use systemtap scripts to investigate these things, we now have pr_debug() helpers that make life easier, and if we really need anything else besides those tools, we will be forced to come up with something better than we have there. Therefore, get rid of this ifdef debugging code entirely for now. Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Ben Hutchings authored
The firmware patch for the Saturn PHY fixes a bug, but is not absolutely essential. And its licence is unclear, so it is not included in all distributions. Just log an error message and continue if it is missing or invalid. References: http://bugs.debian.org/712674Signed-off-by:
-
Enrico Mioso authored
Another QMI-speaking device by ZTE, re-branded by ONDA! I'm connected ovr this device's QMI interface right now, so I can say I tested it! :) Note: a follow-up patch was posted to the linux-usb mailing list, to prevent the option driver from binding to the device's QMI interface, making it unusable. Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Amerigo Wang authored
dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by:dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by:
Chen Weilong <chenweilong@huawei.com> Signed-off-by:
Cong Wang <amwang@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Cong Wang authored
vti module allocates dev->tstats twice: in vti_fb_tunnel_init() and in vti_tunnel_init(), this lead to a memory leak of dev->tstats. Just remove the duplicated operations in vti_fb_tunnel_init(). (candidate for -stable) Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Cong Wang authored
When testing GRE tunnel, I got: # ip tunnel show get tunnel gre0 failed: Invalid argument get tunnel gre1 failed: Invalid argument This is a regression introduced by commit c5441932 ("GRE: Refactor GRE tunneling code.") because previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. After this patch I got: # ip tunnel show gre0: gre/ip remote any local any ttl inherit nopmtudisc gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
We should get rid of all own SCTP debug printk macros and use the ones that the kernel offers anyway instead. This makes the code more readable and conform to the kernel code, and offers all the features of dynamic debbuging that pr_debug() et al has, such as only turning on/off portions of debug messages at runtime through debugfs. The runtime cost of having CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing, is negligible [1]. If kernel debugging is completly turned off, then these statements will also compile into "empty" functions. While we're at it, we also need to change the Kconfig option as it /now/ only refers to the ifdef'ed code portions in outqueue.c that enable further debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code was enabled with this Kconfig option and has now been removed, we transform those code parts into WARNs resp. where appropriate BUG_ONs so that those bugs can be more easily detected as probably not many people have SCTP debugging permanently turned on. To turn on all SCTP debugging, the following steps are needed: # mount -t debugfs none /sys/kernel/debug # echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control This can be done more fine-grained on a per file, per line basis and others as described in [2]. [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf [2] Documentation/dynamic-debug-howto.txt Signed-off-by:
-
Daniel Borkmann authored
In order to avoid making code that deals with printing both, IPv4 and IPv6 addresses, unnecessary complicated as for example ... if (sa.sa_family == AF_INET6) printk("... %pI6 ...", ..sin6_addr); else printk("... %pI4 ...", ..sin_addr.s_addr); ... it would be better to introduce a format specifier that can deal with those kind of situations internally; just as we have a "struct sockaddr" for generic mapping into "struct sockaddr_in" or "struct sockaddr_in6" as e.g. done in "union sctp_addr". Then, we could reduce the above statement into something like: printk("... %pIS ..", &sockaddr); In case our pointer is NULL, pointer() then deals with that already at an earlier point in time internally. While we're at it, support for both %piS/%pIS, where 'S' stands for sockaddr, comes (almost) for free. Additionally to that, postfix specifiers 'p', 'f' and 's' are supported as suggested and initially implemented in 2009 by Joe Perches [1]. Handling of those additional specifiers orientate on the initial RFC that was proposed. Also we support IPv6 compressed format specified by 'c' and various other IPv4 extensions as stated in the documentation part. Likely, there are many other areas than just SCTP in the kernel to make use of this extension as well. [1] http://patchwork.ozlabs.org/patch/31480/Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/vxlan-nextDavid S. Miller authored
Stephen Hemminger says: ==================== Here is current updates for vxlan in net-next. It includes Mike's changes to handle multiple destinations and lots of little cosmetic stuff. This is a fresh vxlan-next repository which was forked from net-next. ==================== Signed-off-by: -
Changli Gao authored
Ver and type in pppoe_hdr should be swapped as defined by RFC2516 section-4. Signed-off-by: -
Dave Jones authored
Two of the x25 ioctl cases have error paths that break out of the function without unlocking the socket, leading to this warning: ================================================ [ BUG: lock held when returning to user space! ] 3.10.0-rc7+ #36 Not tainted ------------------------------------------------ trinity-child2/31407 is leaving the kernel with locks still held! 1 lock held by trinity-child2/31407: #0: (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25] Signed-off-by:Dave Jones <davej@redhat.com> Signed-off-by:
-
Eric Dumazet authored
Following typical setup to implement a ~100 ms RTT and big amount of reorders has very poor performance because netem implements the time queue using a linked list. ----------------------------------------------------------- ETH=eth0 IFB=ifb0 modprobe ifb ip link set dev $IFB up tc qdisc add dev $ETH ingress 2>/dev/null tc filter add dev $ETH parent ffff: \ protocol ip u32 match u32 0 0 flowid 1:1 action mirred egress \ redirect dev $IFB ethtool -K $ETH gro off tso off gso off tc qdisc add dev $IFB root netem delay 50ms 10ms limit 100000 tc qd add dev $ETH root netem delay 50ms limit 100000 --------------------------------------------------------- Switch netem time queue to a rb tree, so this kind of setup can work at high speed. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Bjørn Mork authored
Signed-off-by:
-
Bjørn Mork authored
A standard Gobi 3000 reference design module. Reported-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Bjørn Mork authored
The MC8305 module got an additional entry added based solely on information from a Windows driver *.inf file. We now have the actual descriptor layout from one of these modules, and it consists of two alternate configurations where cfg #1 is a normal Gobi 2k layout and cfg #2 is MBIM only, using interface numbers 5 and 6 for MBIM control and data. The extra Windows driver entry for interface number 5 was most likely a bug. Deleting the bogus entry to avoid unnecessary qmi_wwan probe failures when using the MBIM configuration. Reported-by:
Lana Black <sickmind@lavabit.com> Signed-off-by:
-
- 01 Jul, 2013 14 commits
-
-
Eliezer Tamir authored
Change Low Latency Sockets code for select and poll so that when LLS is disabled sched_clock() is never called. Also, avoid sending POLL_LL to sockets if disabled. Reported-by:
Andi Kleen <andi@firstfloor.org> Signed-off-by:
Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by:
-
Eliezer Tamir authored
Our use of sched_clock is OK because we don't mind the side effects of calling it and occasionally waking up on a different CPU. When CONFIG_DEBUG_PREEMPT is on, disable preempt before calling sched_clock() so we don't trigger a debug_smp_processor_id() warning. Reported-by:
Cody P Schafer <devel-lists@codyps.com> Signed-off-by:
-
Eric Dumazet authored
There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue Convert all skb_queue_purge() calls to the __skb_queue_purge() variant Use __skb_queue_head_init() instead of skb_queue_head_init() to make clear we do not use arp_queue.lock And hold neigh->lock in neigh_destroy() to close the race. Reported-by:
Joe Jin <joe.jin@oracle.com> Signed-off-by:
-
Byungho An authored
This patch fixed that enh_desc value is always zero. Due to calling order of stmmac_selec_desc_mode(), enh_desc value is always zero. Even though mac is set to use enhanced dma descriptor, if enh_desc is zero, functions related dma descriptor are not working correctly. Signed-off-by:
Byungho An <bh74.an@samsung.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Byungho An authored
This patch fixed operator typo from & to ==. Due to incorrect operator, the result is incorrect. Signed-off-by:
-
Joe Perches authored
Instead of mixing printk and pr_<level> forms, just use pr_<level> Miscellaneous changes around these conversions: Add a missing newline to avoid message interleaving, coalesce formats, reflow modified lines to 80 columns. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Christoph Müllner authored
Setup the multicast list of the net_device instead of clearing it blindly. This restores the multicast groups in case of a link down/up event or when resuming from suspend. Signed-off-by:
Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by:
-
Nicolas Dichtel authored
There is no reason to skip ECMP lookup when oif is specified, but this implies to check oif given by user when selecting another route. When the new route does not match oif requirement, we simply keep the initial one. Spotted-by:
dingzhi <zhi.ding@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Hannes Frederic Sowa authored
Because of commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets for 2002::/16 destinations and sources even when configured to work as a tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing checks if the device is not in pointopoint mode. This was an oversight from me in the above commit, sorry. Thanks to Roman Mamedov for reporting this! Reported-by:
Roman Mamedov <rm@romanrm.ru> Cc: David Miller <davem@davemloft.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== Yet one more pull request for wireless updates intended for 3.11... For the mac80211 bits, Johannes says: "Here we have a few memory leak fixes related to BSS struct handling mostly from Ben, including a fix for a more theoretical problem (associating while a BSS struct times out) from myself, a compilation warning fix from Arend, mesh fixes from Thomas, tracking the beacon bitrate (Alex), a bandwidth change event fix (Ilan) and some initial work for 5/10 MHz channels from Simon." Regarding the iwlwifi bits, Johannes says: "Emmanuel removed some unneeded/unsupported module parameters and adds a Bluetooth 1x1 lookup-table for some upcoming products. From Alex I have an older patch to add low-power receive support, this depended on a mac80211 commit that only just came in with the merge from wireless-next I did. Ilan made beacon timings better, and Eytan added some debug statements for thermal throttling. I have a few cleanups, a fix for a long-standing but rare warning, and, arguably the most important patch here, the firmware API version bump for the 7260/3160 devices." Also included is a Bluetooth pull -- Gustavo says: "Here goes a set of patches to 3.11. The biggest work here is from Andre Guedes on the move of the Discovery to use the new request framework. Other than that Johan provided a bunch of fixes to the L2CAP code. The rest are just small fixes and clean ups." On top of all that, there are a variety of updates and fixes to brcmfmac, rt2x00, wil6210, ath9k, ath10k, and a few others here and there. This also includes a pull of the wireless tree, in order to prevent some merge conflicts. ==================== Signed-off-by: -
Pravin B Shelar authored
Openvswitch uses function from NET_IPGRE_DEMUX module. Add Kconfig dependency to fix following compilation errors: http://marc.info/?l=linux-netdev&m=137244035226634 CC: Jesse Gross <jesse@nicira.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Pravin Shelar <pshelar@nicira.com> Acked-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
-
Johannes Berg authored
A number of places treated features wrongly, listing not-supported features instead of supported ones. Also, the get_drvinfo ethtool callback isn't needed, and alx_get_pauseparam can be simplified. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
In two places, parts of MAC addresses are used as u32/u16 values. This can cause alignment problems, use put_unaligned and get_unaligned to fix this. Reported-by:
-
Johannes Berg authored
As suggested by Ben Hutchings, use separate fields to track current link speed and duplex setting. Reported-by:
-
