Skip to content

L
linux
Switch branch/tag
  1. 02 Feb, 2021 1 commit
  3. 01 Feb, 2021 3 commits
  5. 28 Jan, 2021 2 commits
  7. 27 Jan, 2021 5 commits
  9. 25 Jan, 2021 7 commits
  11. 21 Jan, 2021 6 commits
    • Ricardo Ribalda's avatar
      ASoC: Intel: Skylake: Zero snd_ctl_elem_value · 1d8fe064
      Ricardo Ribalda authored 
      Clear struct snd_ctl_elem_value before calling ->put() to avoid any data
leak.
Signed-off-by: default avatarRicardo Ribalda <ribalda@chromium.org>
Reviewed-by: default avatarCezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-2-ribalda@chromium.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      1d8fe064
    • Ricardo Ribalda's avatar
      ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete · c1c3ba1f
      Ricardo Ribalda authored 
      If dobj->control is not initialized we end up in an OOPs during
skl_tplg_complete:

[   26.553358] BUG: kernel NULL pointer dereference, address:
0000000000000078
[   26.561151] #PF: supervisor read access in kernel mode
[   26.566897] #PF: error_code(0x0000) - not-present page
[   26.572642] PGD 0 P4D 0
[   26.575479] Oops: 0000 [#1] PREEMPT SMP PTI
[   26.580158] CPU: 2 PID: 2082 Comm: udevd Tainted: G         C
5.4.81 #4
[   26.588232] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[   26.597082] RIP: 0010:skl_tplg_complete+0x70/0x144 [snd_soc_skl]

Fixes: 2d744ecf ("ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHL")
Signed-off-by: default avatarRicardo Ribalda <ribalda@chromium.org>
Reviewed-by: default avatarCezary Rojewski <cezary.rojewski@intel.com>
Tested-by: default avatarLukasz Majczak <lma@semihalf.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-1-ribalda@chromium.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      c1c3ba1f
    • Stephen Boyd's avatar
      ASoC: qcom: Fix number of HDMI RDMA channels on sc7180 · 7dfe20ee
      Stephen Boyd authored 
      Suspending/resuming with an HDMI dongle attached leads to crashes from
an audio regmap.

 Unable to handle kernel paging request at virtual address ffffffc018068000
 Mem abort info:
   ESR = 0x96000047
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081b12000
 [ffffffc018068000] pgd=0000000275d14003, pud=0000000275d14003, pmd=000000026365d003, pte=0000000000000000
 Internal error: Oops: 96000047 [#1] PREEMPT SMP
 Call trace:
  regmap_mmio_write32le+0x2c/0x40
  regmap_mmio_write+0x48/0x6c
  _regmap_bus_reg_write+0x34/0x44
  _regmap_write+0x100/0x150
  regcache_default_sync+0xc0/0x138
  regcache_sync+0x188/0x26c
  lpass_platform_pcmops_resume+0x48/0x54 [snd_soc_lpass_platform]
  snd_soc_component_resume+0x28/0x40
  soc_resume_deferred+0x6c/0x178
  process_one_work+0x208/0x3c8
  worker_thread+0x23c/0x3e8
  kthread+0x144/0x178
  ret_from_fork+0x10/0x18
 Code: d503201f d50332bf f94002a8 8b344108 (b9000113)

I can reliably reproduce this problem by running 'tail' on the registers
file in debugfs for the hdmi regmap.

 # tail /sys/kernel/debug/regmap/62d87000.lpass-lpass_hdmi/registers
 [   84.658733] Unable to handle kernel paging request at virtual address ffffffd0128e800c

This crash happens because we're trying to read registers from the
regmap beyond the length of the mapping created by ioremap().

The number of hdmi_rdma_channels determines the size of the regmap via
this code in sound/soc/qcom/lpass-cpu.c:

  lpass_hdmi_regmap_config.max_register = LPAIF_HDMI_RDMAPER_REG(variant, variant->hdmi_rdma_channels);

According to debugfs the size of the regmap is 0x68010 but according to
the DTS file posted in [1] the size is only 0x68000 (see the first reg
property of the lpass_cpu node). Let's change the number of channels to
be 3 instead of 4 so the math works out to have a max register of
0x67010, nicely fitting inside of the region size of 0x68000.

Note: I tried to bump up the size of the register region to the next
page to include the 0x68010 register but then the tail command caused
SErrors with an async abort, implying that the register region doesn't
exist or it isn't clocked because the bus is telling us that the
register read failed. I reduce the number of channels and played audio
through the HDMI channel and it kept working so I think this is correct.

Fixes: 2ad63dc8 ("ASoC: qcom: sc7180: Add support for audio over DP")
Link: https://lore.kernel.org/r/1601448168-18396-2-git-send-email-srivasam@codeaurora.org [1]
Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Cc: Srinivasa Rao <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: default avatarStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210115203329.846824-1-swboyd@chromium.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      7dfe20ee
    • Mark Brown's avatar
      Merge series "ASoC: qcom: Fix broken lpass driver" from Srinivas Kandagatla... · 411fc208
      Mark Brown authored 
      Merge series "ASoC: qcom: Fix broken lpass driver" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

LPASS driver is partially broken on DragonBoard DB410c on 5.10 and
its totally broken on other Supported Qualcomm SoCs.

This was due to DAI ids being over written by the SoC specific header files
in the dt-bindings.

Idea of having SoC specific headers is not doable when we are dealing with
a common driver. So this patchset attempts to fix this properly by creating
a common dt-bindings header for lpass which can be updated with new entries
if required. This patchset also add an simple of_xlate function to resolve
the dai names and different SoCs might not have 1:1 mapping for the
dai_driver array with dai ids.

Changes since v1:
	- removed array indexes as suggested by Stephan G.
	- rebased to sound/for-next branch
	- collected Srinivasa tested-by tag for sc7180 platform.

Thanks,
srini

Srinivas Kandagatla (2):
  ASoC: dt-bindings: lpass: Fix and common up lpass dai ids
  ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY

 include/dt-bindings/sound/apq8016-lpass.h |  7 +++----
 include/dt-bindings/sound/qcom,lpass.h    | 15 +++++++++++++++
 include/dt-bindings/sound/sc7180-lpass.h  |  6 ++----
 sound/soc/qcom/lpass-cpu.c                | 22 ++++++++++++++++++++++
 sound/soc/qcom/lpass-platform.c           | 12 ++++++++++++
 sound/soc/qcom/lpass-sc7180.c             |  9 +++------
 sound/soc/qcom/lpass.h                    |  2 +-
 7 files changed, 58 insertions(+), 15 deletions(-)
 create mode 100644 include/dt-bindings/sound/qcom,lpass.h

--
2.21.0
      411fc208
    • Mark Brown's avatar
      Merge series "ASoC: mediatek: mt8183: ignore TDM DAI link by by default" from... · d146c7b0
      Mark Brown authored 
      Merge series "ASoC: mediatek: mt8183: ignore TDM DAI link by by default" from Tzung-Bi Shih <tzungbi@google.com>:

hdmi-codec is an optional property.  The 2 patches fix DAI link binding
error when the property doesn't exist in DTS.

Tzung-Bi Shih (2):
  ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default
  ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default

 sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c         | 5 ++++-
 sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

--
2.30.0.284.gd98b1dd5eaa7-goog
      d146c7b0
    • Mark Brown's avatar
      Merge series "Add KUNIT tests for ASoC topology" from Amadeusz... · 29be3f02
      Mark Brown authored 
      Merge series "Add KUNIT tests for ASoC topology" from Amadeusz Sławiński<amadeuszx.slawinski@linux.intel.com>:

This series adds unit tests for ASoC topology.

First fix problems found when developing and running test cases and
then add tests implementation.

Tests themselves are quite simple and just call
snd_soc_tplg_component_load() with various parameters and check the
result. Tests themselves are described in more detail in commits
adding them.

Goal is to expand the amount of test cases in following patches.

Prerequisity for this patchset are 2 patches which have already been
sent:
https://lore.kernel.org/alsa-devel/20210114163602.911205-1-amadeuszx.slawinski@linux.intel.com/T/#t

Description on how typical test case itself works:

In order to load topology we need to have 3 things:
card, codec component & platform component.

In typical test case we register card and platform component and bind
to dummy codec. There are of course execeptions, when we want to
test behaviour of topology API when component or card is missing.
Note that this is bit different from typical scenario (in SOF and skylake
drivers) where card is registered by machine driver and component by
platform driver, as we register both when setting up test.

If you check the test case most of them have similar architecture of:
1.
	/* run test */
	ret = snd_soc_register_card(&kunit_comp->card);
	if (ret != 0 && ret != -EPROBE_DEFER)
		KUNIT_FAIL(test, "Failed to register card");

2.
	ret = snd_soc_component_initialize(&kunit_comp->comp, &test_component, test_dev);
	KUNIT_EXPECT_EQ(test, 0, ret);

3.
	ret = snd_soc_add_component(&kunit_comp->comp, NULL, 0);
	KUNIT_EXPECT_EQ(test, 0, ret);

Ad. 1.
First we register card, which in most tests returns -EPROBE_DEFER
(from snd_soc_bind_card()), as platform component is not yet created.
I test for both 0 and -EPROBE_DEFER, as it makes it easier to reshuffle
this code around if needed and there is one test case which does it in
different order.

Ad. 2.
Then we initialize platform component with structure pointing at proper
probe function, which calls snd_soc_tplg_component_load() with test
parameters and checks expected result.

Ad. 3.
And then in follow up we call snd_soc_add_component() which creates
platform component for us and calls snd_soc_try_rebind_card() which
if everything is bound properly calls previously set probe function.

Amadeusz Sławiński (5):
  ASoC: topology: Properly unregister DAI on removal
  Revert "ASoC: soc-devres: add devm_snd_soc_register_dai()"
  ASoC: topology: KUnit: Add KUnit tests passing various arguments to
    snd_soc_tplg_component_load
  ASoC: topology: KUnit: Add KUnit tests passing empty topology with
    variants to snd_soc_tplg_component_load
  ASoC: topology: KUnit: Add KUnit tests passing topology with PCM to
    snd_soc_tplg_component_load

 include/sound/soc.h           |   4 -
 sound/soc/Kconfig             |  17 +
 sound/soc/Makefile            |   5 +
 sound/soc/soc-devres.c        |  37 --
 sound/soc/soc-topology-test.c | 843 ++++++++++++++++++++++++++++++++++
 sound/soc/soc-topology.c      |   9 +-
 6 files changed, 870 insertions(+), 45 deletions(-)
 create mode 100644 sound/soc/soc-topology-test.c

--
2.25.1
      29be3f02
  13. 20 Jan, 2021 8 commits
  15. 18 Jan, 2021 2 commits
  17. 15 Jan, 2021 2 commits
  19. 13 Jan, 2021 4 commits
    • Mark Brown's avatar
      Merge v5.11-rc3 · cea06d9b
      Mark Brown authored
      cea06d9b
    • Kai Vehmanen's avatar
      ASoC: SOF: Intel: fix page fault at probe if i915 init fails · 9c25af25
      Kai Vehmanen authored 
      The earlier commit to fix runtime PM in case i915 init fails,
introduces a possibility to hit a page fault.

snd_hdac_ext_bus_device_exit() is designed to be called from
dev.release(). Calling it outside device reference counting, is
not safe and may lead to calling the device_exit() function
twice. Additionally, as part of ext_bus_device_init(), the device
is also registered with snd_hdac_device_register(). Thus before
calling device_exit(), the device must be removed from device
hierarchy first.

Fix the issue by rolling back init actions by calling
hdac_device_unregister() and then releasing device with put_device().
This matches with existing code in hdac-ext module.

To complete the fix, add handling for the case where
hda_codec_load_module() returns -ENODEV, and clean up the hdac_ext
resources also in this case.

In future work, hdac-ext interface should be extended to allow clients
more flexibility to handle the life-cycle of individual devices, beyond
just the current snd_hdac_ext_bus_device_remove(), which removes all
devices.

BugLink: https://github.com/thesofproject/linux/issues/2646Reported-by: default avatarJaroslav Kysela <perex@perex.cz>
Fixes: 6c63c954 ("ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work")
Signed-off-by: default avatarKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: default avatarRander Wang <rander.wang@intel.com>
Reviewed-by: default avatarLibin Yang <libin.yang@intel.com>
Reviewed-by: default avatarBard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210113150715.3992635-1-kai.vehmanen@linux.intel.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      9c25af25
    • Kai-Heng Feng's avatar
      ASoC: SOF: Intel: hda: Avoid checking jack on system suspend · ef4d764c
      Kai-Heng Feng authored 
      System takes a very long time to suspend after commit 215a22ed
("ALSA: hda: Refactor codec PM to use direct-complete optimization"):
[   90.065964] PM: suspend entry (s2idle)
[   90.067337] Filesystems sync: 0.001 seconds
[   90.185758] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   90.188713] OOM killer disabled.
[   90.188714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   90.190024] printk: Suspending console(s) (use no_console_suspend to debug)
[   90.904912] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C], continue to suspend
[  321.262505] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[  328.426919] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[  329.490933] ACPI: EC: interrupt blocked

That commit keeps the codec suspended during the system suspend. However,
mute/micmute LED will clear codec's direct-complete flag by
dpm_clear_superiors_direct_complete().

This doesn't play well with SOF driver. When its runtime resume is
called for system suspend, hda_codec_jack_check() schedules
jackpoll_work which uses snd_hdac_is_power_on() to check whether codec
is suspended. Because the direct-complete path isn't taken,
pm_runtime_disable() isn't called so snd_hdac_is_power_on() returns
false and jackpoll continues to run, and snd_hda_power_up_pm() cannot
power up an already suspended codec in multiple attempts, causes the
long delay on system suspend:

if (dev->power.direct_complete) {
	if (pm_runtime_status_suspended(dev)) {
		pm_runtime_disable(dev);
		if (pm_runtime_status_suspended(dev)) {
			pm_dev_dbg(dev, state, "direct-complete ");
			goto Complete;
		}

		pm_runtime_enable(dev);
	}
	dev->power.direct_complete = false;
}

When direct-complete path is taken, snd_hdac_is_power_on() returns true
and hda_jackpoll_work() is skipped by accident. So this is still not
correct.

If we were to use snd_hdac_is_power_on() in system PM path,
pm_runtime_status_suspended() should be used instead of
pm_runtime_suspended(), otherwise pm_runtime_{enable,disable}() may
change the outcome of snd_hdac_is_power_on().

Because devices suspend in reverse order (i.e. child first), it doesn't
make much sense to resume an already suspended codec from audio
controller. So avoid the issue by making sure jackpoll isn't used in
system PM process.

Fixes: 215a22ed ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: default avatarKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-3-kai.heng.feng@canonical.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      ef4d764c
    • Kai-Heng Feng's avatar
      ASoC: SOF: Intel: hda: Modify existing helper to disable WAKEEN · 31ba0c07
      Kai-Heng Feng authored 
      Modify hda_codec_jack_wake_enable() to also support disable WAKEEN.
In addition, this patch also moves the WAKEEN disablement call out of
hda_codec_jack_check() into hda_codec_jack_wake_enable().

This is a preparation for next patch.

No functional change intended.
Signed-off-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-2-kai.heng.feng@canonical.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      31ba0c07
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7