Merge tag 'omap-for-v5.14/dt-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree binding clean-up for omaps for v5.14

Minor devicetree clean-up for omaps for the binding checks:

- Drop unsupported dmas for omap2/3 i2c
- Drop redundant ehrpwm compatible
- Drop am33xx-ecap compatible no longer needed
- Correct node names for ecap
- Drop unsupported interrupts for ecap
- Drop redundant ti,pcf8575
- Correct usage for ti,pindir-d0-out-d1-in

* tag 'omap-for-v5.14/dt-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
  ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
  ARM: dts: dra7x-evm: Drop "ti,pcf8575"
  ARM: dts: am33xx: Drop interrupt property from ecap nodes
  ARM: dts: ti: Fix node name for all ecap dt nodes
  ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes
  ARM: dts: ti: drop usage of redundant compatible
  ARM: dts: omap2/3: Drop dmas property from I2C node

Link: https://lore.kernel.org/r/pull-1624002812-396117@atomide.com-2Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: HiSilicon ARM64 DT updates for 5.14

- Correct the HiSilicon copyright

* tag 'hisi-arm64-dt-for-5.14' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: use the correct HiSilicon copyright

Link: https://lore.kernel.org/r/60CBF4AE.7040301@hisilicon.comSigned-off-by: Olof Johansson <olof@lixom.net>

ARM: DT: HiSilicon ARM32 DT updates for 5.14

- Correct the HiSilicon copyright

* tag 'hisi-arm32-dt-for-5.14' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hisilicon: use the correct HiSilicon copyright

Link: https://lore.kernel.org/r/60CBF408.7040302@hisilicon.comSigned-off-by: Olof Johansson <olof@lixom.net>

s/Hisilicon/HiSilicon/.
It should use capital S, according to the official website
https://www.hisilicon.com/en.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

s/Hisilicon/HiSilicon/.
It should use capital S, according to the official website
https://www.hisilicon.com/en.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Merge tag 'amlogic-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM DT changes for v5.14:
- Set the fifo-size of uart_A to 128 bytes like the ARM64 counterpart

* tag 'amlogic-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  ARM: dts: meson: Set the fifo-size of uart_A to 128 bytes

Link: https://lore.kernel.org/r/2f19a5a1-3ed9-dd11-02f1-7d535cb1c25c@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-arm64-dt-for-v5.14-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM64 DT changes for v5.14 round 2:
-  various fixes for Odroid C4/HC4 regulators handling, USB and SPI NOR Flash for HC4

* tag 'amlogic-arm64-dt-for-v5.14-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
  arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
  arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
  arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
  arm64: dts: meson-sm1-odroid: add 5v regulator gpio
  arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
  arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator

Link: https://lore.kernel.org/r/c953e97a-f901-a749-1fb6-b1caa75b4748@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

* tag 'mstar-dt-5.14' of git://github.com/linux-chenxing/linux:
  ARM: dts: mstar: Add watchdog device node

Link: https://lore.kernel.org/r/CAFr9PXknSfSso6Uq0Fn_qJM5ZnJ4QK=YjJ32kKt4XYPrHK5x6w@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

This adds the definition of both an oscillator at 12Mhz required by the
the watchdog and the watchdog device node.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>

Merge tag 'tegra-for-5.14-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.14-rc1

Contains changes to consolidate audio card names, adds audio support on
Jetson Xavier NX and enables SMMU on Tegra194.

* tag 'tegra-for-5.14-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Enable SMMU support on Tegra194
  arm64: tegra: Hook up memory controller to SMMU on Tegra186
  arm64: tegra: Use correct compatible string for Tegra186 SMMU
  arm64: tegra: Audio graph sound card for Jetson Xavier NX
  arm64: tegra: Consolidate audio card names
  arm64: tegra: Add PMU node for Tegra194

Link: https://lore.kernel.org/r/20210611164437.3568059-6-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.14-rc1

This contains various improvements (such as microphone detection and
thermal zones) for some older Tegra devices (such as the Nexus 7 or
the Acer A500).

* tag 'tegra-for-5.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: ouya: Enable memory frequency thermal throttling using ACTMON
  ARM: tegra: nexus7: Enable memory frequency thermal throttling using ACTMON
  ARM: tegra: Add cooling cells to ACTMON device-tree node
  ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant
  ARM: tegra: nexus7: Remove monitored-battery property
  ARM: tegra: nexus7: Improve thermal zones
  ARM: tegra: nexus7: Add i2c-thermtrip node
  ARM: tegra: paz00: Add CPU thermal zone
  ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees
  ARM: tegra: Add reg property to Tegra20 EMC table device-tree nodes
  ARM: tegra: acer-a500: Bump thermal trips by 10C
  ARM: tegra: acer-a500: Specify proper voltage for WiFi SDIO bus
  ARM: tegra: acer-a500: Improve microphone detection

Link: https://lore.kernel.org/r/20210611164437.3568059-4-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.14-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.14-rc1

This contains a conversion of the Tegra clock and reset controller
device tree bindings to the new json-schema format and adds the core
power domain to the PMC device tree bindings.

* tag 'tegra-for-5.14-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: soc: tegra-pmc: Document core power domain
  dt-bindings: clock: tegra: Convert to schema

Link: https://lore.kernel.org/r/20210611164437.3568059-1-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'visconti-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt

Visconti device tree updates for 5.14

- Add DT support for Toshiba Visconti5 PWM driver

* tag 'visconti-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
  arm64: dts: visconti: Add PWM support for TMPV7708 SoC

Link: https://lore.kernel.org/r/20210614234654.2u3xetnn5rwhymwz@toshiba.co.jpSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dts-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS updates for v5.14

This adds DMA, NAND controllers, USB controller and PHY, RPM, L2CC,
thermal sensors and defines thermal zones. It them enables these for the
RB3011.

* tag 'qcom-dts-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: Enable NAND + USB for RB3011
  ARM: dts: qcom: add L2CC and RPM for IPQ8064
  ARM: dts: qcom: Add USB port definitions to ipq806x
  ARM: dts: qcom: Add tsens details to ipq806x
  ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x

Link: https://lore.kernel.org/r/20210614223840.393224-1-bjorn.andersson@linaro.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.14

MSM8916 gains new support for Huawei Ascend G7, with NFC, sensors and
touchscreen. The Samsung Galaxy A3/A5 gains battery support, touch keys,
NFC.

MSM8996 received more cleanup and refactoring, preparing for upcoming
new devices. Note worthy is the long pending enablement of CPUfreq.

SC7180 continues to stabilize, with a range of small fixes for various
bits and pieces, and new revisions for the CoachZ and pompom devices.

SC7280 continues to grow, with more clock controllers, thermal sensors,
thermal zones, CPUfreq and interconnect providers.

Xiaomi Poco F1 gaines audio support and the OnePlus 6/6T gaines IPA
support.

SM8350 gains some cleanups and the IPA device is enabled.

Initial support for the Microsoft Surface Duo, based on SM8150, is
added.

IPQ8074 gained support for the HK10 board.

* tag 'qcom-arm64-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
  arm64: dts: qcom: sc7180: Add xo clock for eMMC and Sd card
  arm64: dts: sc7280: Add interconnect provider DT nodes
  arm64: dts: qcom: msm8916-huawei-g7: Add NFC
  arm64: dts: qcom: msm8916-huawei-g7: Add display regulator
  arm64: dts: qcom: msm8916-huawei-g7: Add sensors
  arm64: dts: qcom: msm8916-huawei-g7: Add touchscreen
  arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7
  arm64: dts: qcom: sc7180-trogdor: Update flash freq to match reality
  arm64: dts: qcom: sc7180: Add wakeup delay for adau codec
  arm64: dts: qcom: sdm845: Remove cros-pd-update on Cheza
  arm64: dts: qcom: sc7180: Remove cros-pd-update on Trogdor
  arm64: dts: qcom: sc7180: Disable PON on Trogdor
  arm64: dts: qcom: sc7180: Modify SPI_CLK voltage level for trogdor
  arm64: dts: qcom: add initial device-tree for Microsoft Surface Duo
  arm64: dts: qcom: sdm845-mtp: enable IPA
  arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
  arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
  arm64: dts: qcom: msm8916-samsung-a2015: Add NFC
  arm64: dts: qcom: msm8916-samsung-a2015: Add rt5033 battery
  arm64: dts: qcom: msm8916-samsung-a5u: Add touch key regulator
  ...

Link: https://lore.kernel.org/r/20210614223712.393096-1-bjorn.andersson@linaro.orgSigned-off-by: Olof Johansson <olof@lixom.net>

The RTC on S2MPS13 PMIC can wakeup the system from suspend to RAM.
Add a generic property for this.

Link: https://lore.kernel.org/r/20210614193309.20248-2-krzysztof.kozlowski@canonical.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210420164943.11152-11-krzysztof.kozlowski@canonical.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree chagnes for 5.14:

- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
  LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
  i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.

* tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
  arm64: dts: imx8mn-evk: disable over current for usb
  arm64: dts: imx8mm-evk: disable over current for usb1
  arm64: dts: freescale: Separate each group of data in the property 'reg'
  arm64: dts: imx8: conn: fix enet clock setting
  arm64: dts: imx8mq: assign PCIe clocks
  arm64: dts: imx8mn: specify dma-ranges
  arm64: dts: imx8mm: specify dma-ranges
  arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
  arm64: dts: imx8mn-beacon-som: Assign PMIC clock
  arm64: dts: ls208xa: remove bus-num from dspi node
  arm64: dts: ls1012a: enable PCIe on freeway board
  arm64: dts: imx8mp-evk: enable EQOS ethernet
  arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
  arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
  arm64: dts: imx8mm: Add spba1 and spba2 buses
  arm64: dts: imx8mn: Add spba1 bus
  arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI
  arm64: dts: imx8mq-nitrogen: add USB HOST support
  arm64: dts: imx8mq-nitrogen: add USB OTG support
  arm64: dts: imx8mp-phycore-som: enable spi nor
  ...

Link: https://lore.kernel.org/r/20210613082544.16067-5-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

i.MX device tree changes for 5.14:

- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
  board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
  descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
  imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
  segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
  Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
  reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.

* tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
  ARM: dts: imx6: Add GE B1x5v2
  ARM: dts: imx6q-dhcom: Add ethernet VIO regulator
  ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc
  ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
  ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
  ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
  ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node
  ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97
  ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes
  ARM: dts: imx6dl-prtvt7: Enable the VPU
  ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards
  ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties
  ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.
  ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
  ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
  ARM: dts: imx53-ard: Correct Ethernet node name
  ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name
  ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
  ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
  ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect
  ...

Link: https://lore.kernel.org/r/20210613082544.16067-4-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX dt-bindings update for 5.14:

- Add vendor prefixes for congatec GmbH and DaSheng, Inc.
- Add compatibles for i.MX6Q DaSheng COM-9XX SBC, GE B1x5pv2 and
  i.MX8MM GW7901 boards.
- Add an optional 'resets' property for i.MX GPCv2 bindings.

* tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: add GE B1x5pv2 boards
  dt-bindings: vendor-prefixes: add congatec
  dt-bindings: imx: gpcv2: add support for optional resets
  dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC
  dt-bindings: add dasheng vendor prefix
  dt-bindings: arm: imx: add imx8mm gw7901 support

Link: https://lore.kernel.org/r/20210613082544.16067-3-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone_dts_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt

ARM: DTS: Keystone K2G cleanup for v5.13

  - Rename message manager node
  - Rename the TI-SCI node and clock
  - assign clock to McAsp

* tag 'keystone_dts_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: k2g-evm: Move audio oscillator assigned clock to mcasp
  ARM: dts: keystone: k2g: Rename the TI-SCI clocks node name
  ARM: dts: keystone: k2g: Rename the TI-SCI node
  ARM: dts: keystone: k2g: Rename message-manager node

Link: https://lore.kernel.org/r/1623564020-9958-1-git-send-email-santosh.shilimkar@oracle.comSigned-off-by: Olof Johansson <olof@lixom.net>

Add PWM node in TMPV7708's dtsi, and tmpv7708-rm-mbrc boards's dts.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>

The calculations for the DLL register values are based on the clock rate
of the reference clock. Provide the reference clock in the definition of
the two SDHCI controllers to not rely on the default values.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Link: https://lore.kernel.org/r/1623309107-27833-1-git-send-email-sbhanu@codeaurora.org
[bjorn: Rewrote commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The first UART controller in the "Everything-Else" power domain is
called uart_A. Unlike all other UARTs (which use a 64 byte fifo-size in
hardware) uart_A has a fifo-size of 128 bytes. This UART controller is
typically used for Bluetooth HCI.
The fifo-size of 128 bytes is valid from all SoCs from Meson6 (or
possibly even earlier) all the way up to the latest 64-bit ones.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210604170844.2201229-1-martin.blumenstingl@googlemail.com

Drop the hub_5v regulator which controls the HUB Reset line with GPIOH_4 which
is already controlled by a GPIO HOG.

Until we can properly describe how to control USB HUBs reset lines, keeping
the GPIO HOG is an acceptable solution we use on multiple boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-8-narmstrong@baylibre.com

Add a node for the XT25F128B SPI-NOR flash to make it accessible
from Linux.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-7-narmstrong@baylibre.com

As described in the HC4 schematics, GPIOH_8 controls the USB 5V and 12V
regulators used to power the SATA drives.

And is set as Open Drain since this GPIO doesn't support Push-Pull.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-6-narmstrong@baylibre.com

As described in the HC4 schematics, only the USB port B is used,
port A is left unconnected. Thus disable PHY0 and remove it from PHYs list.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-5-narmstrong@baylibre.com

As described in the Odroid-C4 & Odroid-HC4 schematics, the 5V regulator is controlled
by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-4-narmstrong@baylibre.com

According to Odroid-C4 & HC4 Schematics, the TF_3V3N_1V8_EN can be in Hi-Z for 3v3,
and since it's the default GPIOAO_6 mode at reset, let switch this GPIO as Open-Source
to drive for 1, and input for 0.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-3-narmstrong@baylibre.com

As described in the schematics of Odroid-C4 and Odroid-HC4, the TF_IO regulator
is enabled by the GPIOE_2 GPIO and gets it's supply from VCC_5V.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-2-narmstrong@baylibre.com

The SL3516 SoC has a crypto offloader IP.
This patch adds it on the gemini SoC Device-tree.

Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.orgSigned-off-by: Corentin Labbe <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
  - I2S Support for the V3
  - Audio Codec Support for the V3s
  - DMA support for the V3s
  - PWM support for the V3s
  - Support for Bluetooth Audio on the pinephone
  - Add A10-like timers to the A64 and R40
  - New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5

* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
  ARM: dts: sun8i: v3s: enable emac for zero Dock
  arm64: dts: allwinner: pinephone: Set audio card name
  ARM: dts: sun8i: r40: Add timer node
  ARM: dts: sun8i: V3: add I2S interface to V3 dts
  dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
  ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
  ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
  ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
  ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
  ARM: dts: sun8i: v3s: add DMA controller to v3s dts
  ARM: dts: sun8i: v3s: add pwm controller to v3s dts
  dt-bindings: pwm: allwinner: add v3s pwm compatible
  arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
  dt-bindings: arm: Add NanoPi R1S H5
  arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
  arm64: dts: allwinner: a64: Allow multiple DAI links
  arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
  arm64: dts: allwinner: a64: Allow using multiple codec DAIs
  ARM: dts: sun8i-a33: Allow using multiple codec DAIs
  ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
  ...

Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhostSigned-off-by: Olof Johansson <olof@lixom.net>

AT91 dt for 5.14:

- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation

* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  dt-bindings: i2c: at91: fix example for scl-gpios
  ARM: dts: at91: sama5d4: fix pinctrl muxing

Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8173:
- split hardware encoder block into two devices.

mt8167:
- add pm domains, multi-media system (mmsys), SMI, local arbiter
  (larb) and IOMMU nodes.

mt8183:
- Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP
  Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3.
- add power domain to SMI common node.
- add power supplies for EEPROM node.

* tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits)
  arm64: dts: mt8183: Add node for the Mali GPU
  arm64: dts: mt8183-kukui: Add tboard thermal zones
  arm64: dts: mt8183: add cbas node under cros_ec
  arm64: dts: mt8183: add supply name for eeprom
  arm64: dts: mt8183: remove syscon from smi_common node
  arm64: dts: mt8183: Add kukui-jacuzzi-fennel board
  arm64: dts: mt8183: Add kukui-jacuzzi-kenzo board
  arm64: dts: mt8183: Add kukui-jacuzzi-burnet board
  arm64: dts: mt8183: Add kukui-jacuzzi-willow board
  arm64: dts: mt8183: Add kukui-jacuzzi-kappa board
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-fennel
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kenzo
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-burnet
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-willow
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kappa
  arm64: dts: mediatek: mt8167: add iommu node
  arm64: dts: mediatek: mt8167: add larb nodes
  arm64: dts: mediatek: mt8167: add smi_common node
  arm64: dts: mediatek: mt8167: add mmsys node
  arm64: dts: mediatek: mt8167: add power domains
  ...

Link: https://lore.kernel.org/r/117d5eb5-bc99-70bb-a1a9-d7141fe96527@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.14

  - Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
  - Document support for the new RZ/G2L SMARC EVK board.

* tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
  dt-bindings: arm: renesas: Document SMARC EVK
  dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC

Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.14 (take two)

  - External interrupt (INTC-EX) support for the R-Car M3-W+ SoC,
  - Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK
    board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: r9a07g044: Add SYSC node
  arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
  arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node
  arm64: dts: renesas: r8a77961: Add INTC-EX device node
  ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys
  ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys
  ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys
  ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keys
  arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages
  arm64: dts: renesas: Add missing opp-suspend properties

Link: https://lore.kernel.org/r/cover.1623403796.git.geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv8 Juno fix for v5.14

Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.

* tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Update SCPI nodes as per the YAML schema

Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
  with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
  e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
  magnetometer.

* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: ux500: Fix orientation of Janice accelerometer
  ARM: dts: href: Mount matrices for TVK R2
  ARM: dts: ux500: Fix some compatible strings
  ARM: dts: ux500: Drop drdy pin assignment from magnetometer
  ARM: dts: ux500: Fix orientation of accelerometer
  ARM: dts: ux500: Rename gpio-controller node
  ARM: dts: ux500: Fix interrupt cells

Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM64-based SoCs changes for 5.14,
please pull the following:

- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
  binding warning

* tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: normalize the node name of the UART devices

Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:

- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
  files to resolve a number of DT binding check warnings pertaining to
  NAND, pinmux, clocks, SPI

- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
  causing regressions on the Raspberry Pi 4B

- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
  off that variant properly

- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
  re-organization work and finally adding the DTS file proper

* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: Add reference to RPi 400
  ARM: dts: Add Raspberry Pi 400 support
  ARM: dts: bcm283x: Fix up GPIO LED node names
  dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
  ARM: dts: Move BCM2711 RPi specific into separate dtsi
  ARM: dts: bcm283x: Fix up MMC node names
  ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
  Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
  ARM: dts: BCM5301X: Fixup SPI binding
  dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
  ARM: dts: BCM5301X: Fix pinmux subnodes names
  ARM: dts: Hurricane 2: Fix NAND nodes names
  ARM: dts: BCM63xx: Fix NAND nodes names
  ARM: NSP: dts: fix NAND nodes names
  ARM: Cygnus: dts: fix NAND nodes names
  ARM: brcmstb: dts: fix NAND nodes names
  ARM: dts: BCM5301X: Fix NAND nodes names

Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>