- 31 Mar, 2006 40 commits
-
-
Nicolas Pitre authored
Turn some macros into inline functions and add proper type checking as well as being more readable. Also a minor comment adjustment. Signed-off-by:
Nicolas Pitre <nico@cam.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
Decrease the number of pointer derefs in drivers/serial/jsm/jsm_tty.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Acked-by:
"V. ANANDA KRISHNAN" <mansarov@us.ibm.com> Signed-off-by:
-
Adrian Bunk authored
As announced, lookup_hash() can now become static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Adrian Bunk authored
The only user of get_wchan is the proc fs - and proc can't be built modular. Signed-off-by:
-
NeilBrown authored
Signed-off-by:
Brad Campbell <brad@wasp.net.au> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
And remove the comments that were put in inplace of a fix too.... Signed-off-by:
-
NeilBrown authored
Currently a device failure during recovery leaves bits set in the bitmap. This normally isn't a problem as the offending device will be rejected because of errors. However if device re-adding is being used with non-persistent bitmaps, this can be a problem. Signed-off-by:
-
Michael Hanselmann authored
This patch removes the old radeon driver which has been replaced by a newer one. Signed-off-by:
Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
The monochrome->color expansion routine that handles bitmaps which have (widths % 8) != 0 (slow_imageblit) produces corrupt characters in big-endian. This is caused by a bogus bit test in slow_imageblit(). Fix. This patch may deserve to go to the stable tree. The code has already been well tested in little-endian machines. It's only in big-endian where there is uncertainty and Herbert confirmed that this is the correct way to go. It should not introduce regressions. Signed-off-by:
Herbert Poetzl <herbert@13thfloor.at> Cc: <stable@kernel.org> Signed-off-by:
-
Richard Purdie authored
Fixes for the pxafb driver: * Return -EINVAL for resolutions that are too large as per framebuffer driver policy. * Increase the error timeout for disabling the LCD controller. The current timeout is sometimes too short on the Sharp Zaurus Cxx00 hardware and an extra delay in an error path shouldn't pose any problems. * Fix a dev reference which causes a compile error when DEBUG is defined. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Richard Purdie authored
Generalise the Corgi backlight driver by moving the default intensity and limit mask settings into the platform specific data structure. This enables the driver to support other Zaurus hardware, specifically the SL-6000x (Tosa) model. Also change the spinlock to a mutex (the spinlock is overkill). Signed-off-by:
-
Richard Purdie authored
Updates to the HP Jornada 680 Backlight driver: - Correct the suspend/resume functions so the driver compiles (SUSPEND_POWER_DOWN/RESUME_POWER_ON no longer exist). - Convert the driver to match the recent platform device changes. - Replace the unsafe static struct platform_device with dynamic allocation. - Convert the driver to the new backlight code. This has not been tested on a device due to lack of hardware but wouldn't compile beforehand. Signed-off-by:
-
Richard Purdie authored
Backlight class attributes are currently easy to implement incorrectly. Moving certain handling into the backlight core prevents this whilst at the same time makes the drivers simpler and consistent. The following changes are included: The brightness attribute only sets and reads the brightness variable in the backlight_properties structure. The power attribute only sets and reads the power variable in the backlight_properties structure. Any framebuffer blanking events change a variable fb_blank in the backlight_properties structure. The backlight driver has only two functions to implement. One function is called when any of the above properties change (to update the backlight brightness), the second is called to return the current backlight brightness value. A new attribute "actual_brightness" is added to return this brightness as determined by the driver having combined all the above factors (and any driver/device specific factors). Additionally, the backlight core takes care of checking the maximum brightness is not exceeded and of turning off the backlight before device removal. The corgi backlight driver is updated to reflect these changes. Signed-off-by:
-
Alberto Mardegan authored
Add acceleration support in w100fb.c (i.e. ATI Imageons) for the copyarea and fillrect operations. Signed-off-by:
Alberto Mardegan <mardy@users.sourceforge.net> Signed-off-by:
-
Antonino A. Daplas authored
The current display was not saved during initialization. This leads to hard to track console corruption, such as a misplaced cursor, which is correctible by switching consoles. Fix this minor bug. Signed-off-by:
-
Eric W. Biederman authored
It is very common to hash a dentry and then to call lookup. If we take fs specific hash functions into account the full hash logic can get ugly. Further full_name_hash as an inline function is almost 100 bytes on x86 so having a non-inline choice in some cases can measurably decrease code size. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
Simplifies the code, reduces the need for 4 pid hash tables, and makes the code more capable. In the discussions I had with Oleg it was felt that to a large extent the cleanup itself justified the work. With struct pid being dynamically allocated meant we could create the hash table entry when the pid was allocated and free the hash table entry when the pid was freed. Instead of playing with the hash lists when ever a process would attach or detach to a process. For myself the fact that it gave what my previous task_ref patch gave for free with simpler code was a big win. The problem is that if you hold a reference to struct task_struct you lock in 10K of low memory. If you do that in a user controllable way like /proc does, with an unprivileged but hostile user space application with typical resource limits of 1000 fds and 100 processes I can trigger the OOM killer by consuming all of low memory with task structs, on a machine wight 1GB of low memory. If I instead hold a reference to struct pid which holds a pointer to my task_struct, I don't suffer from that problem because struct pid is 2 orders of magnitude smaller. In fact struct pid is small enough that most other kernel data structures dwarf it, so simply limiting the number of referring data structures is enough to prevent exhaustion of low memory. This splits the current struct pid into two structures, struct pid and struct pid_link, and reduces our number of hash tables from PIDTYPE_MAX to just one. struct pid_link is the per process linkage into the hash tables and lives in struct task_struct. struct pid is given an indepedent lifetime, and holds pointers to each of the pid types. The independent life of struct pid simplifies attach_pid, and detach_pid, because we are always manipulating the list of pids and not the hash table. In addition in giving struct pid an indpendent life it makes the concept much more powerful. Kernel data structures can now embed a struct pid * instead of a pid_t and not suffer from pid wrap around problems or from keeping unnecessarily large amounts of memory allocated. Signed-off-by:
-
Eric W. Biederman authored
A big problem with rcu protected data structures that are also reference counted is that you must jump through several hoops to increase the reference count. I think someone finally implemented atomic_inc_not_zero(&count) to automate the common case. Unfortunately this means you must special case the rcu access case. When data structures are only visible via rcu in a manner that is not determined by the reference count on the object (i.e. tasks are visible until their zombies are reaped) there is a much simpler technique we can employ. Simply delaying the decrement of the reference count until the rcu interval is over. What that means is that the proc code that looks up a task and later wants to sleep can now do: rcu_read_lock(); task = find_task_by_pid(some_pid); if (task) { get_task_struct(task); } rcu_read_unlock(); The effect on the rest of the kernel is that put_task_struct becomes cheaper and immediate, and in the case where the task has been reaped it frees the task immediate instead of unnecessarily waiting an until the rcu interval is over. Cleanup of task_struct does not happen when its reference count drops to zero, instead cleanup happens when release_task is called. Tasks can only be looked up via rcu before release_task is called. All rcu protected members of task_struct are freed by release_task. Therefore we can move call_rcu from put_task_struct into release_task. And we can modify release_task to not immediately release the reference count but instead have it call put_task_struct from the function it gives to call_rcu. The end result: - get_task_struct is safe in an rcu context where we have just looked up the task. - put_task_struct() simplifies into its old pre rcu self. This reorganization also makes put_task_struct uncallable from modules as it is not exported but it does not appear to be called from any modules so this should not be an issue, and is trivially fixed. Signed-off-by: -
Herbert Poetzl authored
proc_check_chroot() does the check in a very unintuitive way (keeping a copy of the argument, then modifying the argument), and has uncommented sideeffects. Signed-off-by:
-
Andrew Morton authored
This just got nuked in mainline. Bring it back because Eric's patches use it. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
The core problem: setsid fails if it is called by init. The effect in 2.6.16 and the earlier kernels that have this problem is that if you do a "ps -j 1 or ps -ej 1" you will see that init and several of it's children have process group and session == 0. Instead of process group == session == 1. Despite init calling setsid. The reason it fails is that daemonize calls set_special_pids(1,1) on kernel threads that are launched before /sbin/init is called. The only remaining effect in that current->signal->leader == 0 for init instead of 1. And the setsid call fails. No one has noticed because /sbin/init does not check the return value of setsid. In 2.4 where we don't have the pidhash table, and daemonize doesn't exist setsid actually works for init. I care a lot about pid == 1 not being a special case that we leave broken, because of the container/jail work that I am doing. - Carefully allow init (pid == 1) to call setsid despite the kernel using its session. - Use find_task_by_pid instead of find_pid because find_pid taking a pidtype is going away. Signed-off-by:
-
Thomas Gleixner authored
The futex timeval is not checked for correctness. The change does not break existing applications as the timeval is supplied by glibc (and glibc always passes a correct value), but the glibc-internal tests for this functionality fail. Signed-off-by:
Thomas Gleixner <tglx@tglx.de> Signed-off-by:
-
Con Kolivas authored
To increase the strength of SCHED_BATCH as a scheduling hint we can activate batch tasks on the expired array since by definition they are latency insensitive tasks. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Acked-by:
-
Con Kolivas authored
On runqueue time is used to elevate priority in schedule(). In the code it currently requeues tasks even if their priority is not elevated, which would end up placing them at the end of their runqueue array effectively delaying them instead of improving their priority. Bug spotted by Mike Galbraith <efault@gmx.de> This patch removes this requeueing. Signed-off-by:
-
Con Kolivas authored
Tasks waiting in SLEEP_NONINTERACTIVE state can now get to best priority so they need to be included in the idle detection code. Signed-off-by:
-
Con Kolivas authored
We watch for tasks that sleep extended periods and don't allow one single prolonged sleep period from elevating priority to maximum bonus to prevent cpu bound tasks from getting high priority with single long sleeps. There is a bug in the current code that also penalises tasks that already have high priority. Correct that bug. Signed-off-by:
-
Con Kolivas authored
Alterations to the pipe code in the kernel made it possible for relative starvation to occur with tasks that slept waiting on a pipe getting unfair priority bonuses even if they were otherwise fully cpu bound so the TASK_NONINTERACTIVE flag was introduced which prevented any change to sleep_avg while sleeping waiting on a pipe. This change also leads to the converse though, preventing any priority boost from occurring in truly interactive tasks that wait on pipes. Convert the TASK_NONINTERACTIVE flag to set sleep_type to SLEEP_NONINTERACTIVE which will allow a linear bonus to priority based on sleep time thus allowing interactive tasks to get high priority if they sleep enough. Signed-off-by:
-
Con Kolivas authored
The activated flag in task_struct is used to track different sleep types and its usage is somewhat obfuscated. Convert the variable to an enum with more descriptive names without altering the function. Signed-off-by:
-
Jack Steiner authored
Currently, count_active_tasks() calls both nr_running() & nr_interruptible(). Each of these functions does a "for_each_cpu" & reads values from the runqueue of each cpu. Although this is not a lot of instructions, each runqueue may be located on different node. Depending on the architecture, a unique TLB entry may be required to access each runqueue. Since there may be more runqueues than cpu TLB entries, a scan of all runqueues can trash the TLB. Each memory reference incurs a TLB miss & refill. In addition, the runqueue cacheline that contains nr_running & nr_uninterruptible may be evicted from the cache between the two passes. This causes unnecessary cache misses. Combining nr_running() & nr_interruptible() into a single function substantially reduces the TLB & cache misses on large systems. This should have no measureable effect on smaller systems. On a 128p IA64 system running a memory stress workload, the new function reduced the overhead of calc_load() from 605 usec/call to 324 usec/call. Signed-off-by:
Jack Steiner <steiner@sgi.com> Acked-by:
-
Dimitri Sivanich authored
It seems that run_hrtimer_queue() is calling get_softirq_time() more often than it needs to. With this patch, it only calls get_softirq_time() if there's a pending timer. Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
Replace the nanosleep private sleeper functionality by the generic hrtimer sleeper. Signed-off-by:
-
Thomas Gleixner authored
The removal of the data field in the hrtimer structure enforces the embedding of the timer into another data structure. nanosleep now uses a private implementation of the most common used timer callback function (simple task wakeup). In order to avoid the reimplentation of such functionality all over the place a generic hrtimer_sleeper functionality is created. Signed-off-by:
-
Richard Purdie authored
Add an LED trigger for IDE disk activity to the ide-disk driver. Signed-off-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Richard Purdie authored
Ensure ide-taskfile.c calls any driver specific end_request function if present. Signed-off-by:
-
Richard Purdie authored
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Dirk Opfer authored
Adds LED drivers for LEDs found on the Sharp Zaurus c6000 model (tosa). Signed-off-by:
Dirk Opfer <dirk@opfer-online.de> Signed-off-by:
-
John Bowler authored
NEW_LEDS support for ixp4xx boards where LEDs are connected to the GPIO lines. This includes a new generic ixp4xx driver (leds-ixp4xx-gpio.c name "IXP4XX-GPIO-LED") Signed-off-by:
John Bowler <jbowler@acm.org> Signed-off-by:
-
Richard Purdie authored
Adds an LED driver for LEDs exported by the Sharp LOCOMO chip as found on some models of Sharp Zaurus. Signed-off-by:
-
Richard Purdie authored
Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd, husky) and cxx00 (akita, spitz, borzoi) models. Signed-off-by:
-
Richard Purdie authored
Add an LED trigger for the charger status as found on the Sharp Zaurus series of devices. Signed-off-by:
Pavel Machek <pavel@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
