- 17 Sep, 2019 40 commits
-
-
Miklos Szeredi authored
CVE-2019-11487 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> (cherry picked from commit 7bf2d1df) Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Acked-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1840289Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1840289 commit 50f6393f upstream. The condition in xen_swiotlb_free_coherent() for deciding whether to call xen_destroy_contiguous_region() is wrong: in case the region to be freed is not contiguous calling xen_destroy_contiguous_region() is the wrong thing to do: it would result in inconsistent mappings of multiple PFNs to the same MFN. This will lead to various strange crashes or data corruption. Instead of calling xen_destroy_contiguous_region() in that case a warning should be issued as that situation should never occur. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stefan Haberland authored
BugLink: https://bugs.launchpad.net/bugs/1840289 commit 41995342 upstream. After getting a storage server event that causes the DASD device driver to update its unit address configuration during a device shutdown there is the possibility of an endless loop in the device driver. In the system log there will be ongoing DASD error messages with RC: -19. The reason is that the loop starting the ruac request only terminates when the retry counter is decreased to 0. But in the sleep_on function there are early exit paths that do not decrease the retry counter. Prevent an endless loop by handling those cases separately. Remove the unnecessary do..while loop since the sleep_on function takes care of retries by itself. Fixes: 8e09f215 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org # 2.6.25+ Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ondrej Mosnacek authored
BugLink: https://bugs.launchpad.net/bugs/1840289 commit 45385237 upstream. Since roles_init() adds some entries to the role hash table, we need to destroy also its keys/values on error, otherwise we get a memory leak in the error path. Cc: <stable@vger.kernel.org> Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Josh Poimboeuf authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 3901336e ] After making a change to improve objtool's sibling call detection, it started showing the following warning: arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame The problem is the ____kvm_handle_fault_on_reboot() macro. It does a fake call by pushing a fake RIP and doing a jump. That tricks the unwinder into printing the function which triggered the exception, rather than the .fixup code. Instead of the hack to make it look like the original function made the call, just change the macro so that the original function actually does make the call. This allows removal of the hack, and also makes objtool happy. I triggered a vmx instruction exception and verified that the stack trace is still sane: kernel BUG at arch/x86/kvm/x86.c:358! invalid opcode: 0000 [#1] SMP PTI CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16 Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017 RIP: 0010:kvm_spurious_fault+0x5/0x10 Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246 RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000 RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000 R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0 R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000 FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: loaded_vmcs_init+0x4f/0xe0 alloc_loaded_vmcs+0x38/0xd0 vmx_create_vcpu+0xf7/0x600 kvm_vm_ioctl+0x5e9/0x980 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? free_one_page+0x13f/0x4e0 do_vfs_ioctl+0xa4/0x630 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa349b1ee5b Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.comSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit a318f12e ] Andreas Christoforou reported: UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow: 9 * 2305843009213693951 cannot be represented in type 'long int' ... Call Trace: mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414 evict+0x472/0x8c0 fs/inode.c:558 iput_final fs/inode.c:1547 [inline] iput+0x51d/0x8c0 fs/inode.c:1573 mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320 mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459 vfs_mkobj+0x39e/0x580 fs/namei.c:2892 prepare_open ipc/mqueue.c:731 [inline] do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771 Which could be triggered by: struct mq_attr attr = { .mq_flags = 0, .mq_maxmsg = 9, .mq_msgsize = 0x1fffffffffffffff, .mq_curmsgs = 0, }; if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1) perror("mq_open"); mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and preparing to return -EINVAL. During the cleanup, it calls mqueue_evict_inode() which performed resource usage tracking math for updating "user", before checking if there was a valid "user" at all (which would indicate that the calculations would be sane). Instead, delay this check to after seeing a valid "user". The overflow was real, but the results went unused, so while the flaw is harmless, it's noisy for kernel fuzzers, so just fix it by moving the calculation under the non-NULL "user" where it actually gets used. Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescookSigned-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Andreas Christoforou <andreaschristofo@gmail.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mikko Rapeli authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit f90fb3c7 ] Only users of upc_req in kernel side fs/coda/psdev.c and fs/coda/upcall.c already include linux/coda_psdev.h. Suggested by Jan Harkes <jaharkes@cs.cmu.edu> in https://lore.kernel.org/lkml/20150531111913.GA23377@cs.cmu.edu/ Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace: linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type struct list_head uc_chain; ^ linux/coda_psdev.h:13:2: error: unknown type name `caddr_t' caddr_t uc_data; ^ linux/coda_psdev.h:14:2: error: unknown type name `u_short' u_short uc_flags; ^ linux/coda_psdev.h:15:2: error: unknown type name `u_short' u_short uc_inSize; /* Size is at most 5000 bytes */ ^ linux/coda_psdev.h:16:2: error: unknown type name `u_short' u_short uc_outSize; ^ linux/coda_psdev.h:17:2: error: unknown type name `u_short' u_short uc_opcode; /* copied from data to save lookup */ ^ linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t' wait_queue_head_t uc_sleep; /* process' wait queue */ ^ Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
-
Sam Protsenko authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit b2a57e33 ] The kernel is self-contained project and can be built with bare-metal toolchain. But bare-metal toolchain doesn't define __linux__. Because of this u_quad_t type is not defined when using bare-metal toolchain and codafs build fails. This patch fixes it by defining u_quad_t type unconditionally. Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by:
-
Zhouyang Jia authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 02551c23 ] When fget fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling fget. Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
-
Doug Berger authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit c633324e ] The description of cma_declare_contiguous() indicates that if the 'fixed' argument is true the reserved contiguous area must be exactly at the address of the 'base' argument. However, the function currently allows the 'base', 'size', and 'limit' arguments to be silently adjusted to meet alignment constraints. This commit enforces the documented behavior through explicit checks that return an error if the region does not fit within a specified region. Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com Fixes: 5ea3b1b2 ("cma: add placement specifier for "cma=" kernel parameter") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Cc: Yue Hu <huyue2@yulong.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 29e7e966 ] clang warns about a few parts of the math-emu implementation where a 16-bit integer becomes negative during assignment: arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion] (0x41 + EXTENDED_Ebias) | SIGN_Negative); ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16' #define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); } ~ ^ arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion] FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66, ^~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion] FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ The code is correct as is, so add a typecast to shut up the warnings. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit ec633558 ] There are many compiler warnings like this, In file included from ./arch/x86/include/asm/smp.h:13, from ./arch/x86/include/asm/mmzone_64.h:11, from ./arch/x86/include/asm/mmzone.h:5, from ./include/linux/mmzone.h:969, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from arch/x86/kernel/apic/io_apic.c:34: arch/x86/kernel/apic/io_apic.c: In function 'check_timer': ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " ^~~~~~~~~~~ ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " ^~~~~~~~~~~ APIC_QUIET is 0, so silence them by making apic_verbosity type int. Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Benjamin Poirier authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 7429c6c0 ] While changing the number of interrupt channels, be2net stops adapter operation (including netif_tx_disable()) but it doesn't signal that it cannot transmit. This may lead dev_watchdog() to falsely trigger during that time. Add the missing call to netif_carrier_off(), following the pattern used in many other drivers. netif_carrier_on() is already taken care of in be_open(). Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit dfd6f9ad ] clang gets confused by an uninitialized variable in what looks to it like a never executed code path: arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized] polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; ^~~~~~~~ arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning int rc, irq, trigger, polarity; ^ = 0 arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized] trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; ^~~~~~~ arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning int rc, irq, trigger, polarity; ^ = 0 This is unfortunately a design decision in clang and won't be fixed. Changing the acpi_get_override_irq() macro to an inline function reliably avoids the issue. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Benjamin Block authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 48464708 ] GCC v9 emits this warning: CC drivers/s390/scsi/zfcp_erp.o drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_action_enqueue': drivers/s390/scsi/zfcp_erp.c:217:26: warning: 'erp_action' may be used uninitialized in this function [-Wmaybe-uninitialized] 217 | struct zfcp_erp_action *erp_action; | ^~~~~~~~~~ This is a possible false positive case, as also documented in the GCC documentations: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized The actual code-sequence is like this: Various callers can invoke the function below with the argument "want" being one of: ZFCP_ERP_ACTION_REOPEN_ADAPTER, ZFCP_ERP_ACTION_REOPEN_PORT_FORCED, ZFCP_ERP_ACTION_REOPEN_PORT, or ZFCP_ERP_ACTION_REOPEN_LUN. zfcp_erp_action_enqueue(want, ...) ... need = zfcp_erp_required_act(want, ...) need = want ... maybe: need = ZFCP_ERP_ACTION_REOPEN_PORT maybe: need = ZFCP_ERP_ACTION_REOPEN_ADAPTER ... return need ... zfcp_erp_setup_act(need, ...) struct zfcp_erp_action *erp_action; // <== line 217 ... switch(need) { case ZFCP_ERP_ACTION_REOPEN_LUN: ... erp_action = &zfcp_sdev->erp_action; WARN_ON_ONCE(erp_action->port != port); // <== access ... break; case ZFCP_ERP_ACTION_REOPEN_PORT: case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: ... erp_action = &port->erp_action; WARN_ON_ONCE(erp_action->port != port); // <== access ... break; case ZFCP_ERP_ACTION_REOPEN_ADAPTER: ... erp_action = &adapter->erp_action; WARN_ON_ONCE(erp_action->port != NULL); // <== access ... break; } ... WARN_ON_ONCE(erp_action->adapter != adapter); // <== access When zfcp_erp_setup_act() is called, 'need' will never be anything else than one of the 4 possible enumeration-names that are used in the switch-case, and 'erp_action' is initialized for every one of them, before it is used. Thus the warning is a false positive, as documented. We introduce the extra if{} in the beginning to create an extra code-flow, so the compiler can be convinced that the switch-case will never see any other value. BUG_ON()/BUG() is intentionally not used to not crash anything, should this ever happen anyway - right now it's impossible, as argued above; and it doesn't introduce a 'default:' switch-case to retain warnings should 'enum zfcp_erp_act_type' ever be extended and no explicit case be introduced. See also v5.0 commit 399b6c8b ("scsi: zfcp: drop old default switch case which might paper over missing case"). Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Andrea Parri authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 74960773 ] This barrier only applies to the read-modify-write operations; in particular, it does not apply to the atomic64_set() primitive. Replace the barrier with an smp_mb(). Fixes: fdd4e158 ("ceph: rework dcache readdir") Reported-by:
"Paul E. McKenney" <paulmck@linux.ibm.com> Reported-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
David Sterba authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 0ee5f8ae ] The list of profiles in btrfs_chunk_max_errors lists DUP as a profile DUP able to tolerate 1 device missing. Though this profile is special with 2 copies, it still needs the device, unlike the others. Looking at the history of changes, thre's no clear reason why DUP is there, functions were refactored and blocks of code merged to one helper. d20983b4 Btrfs: fix writing data into the seed filesystem - factor code to a helper de11cc12 Btrfs: don't pre-allocate btrfs bio - unrelated change, DUP still in the list with max errors 1 a236aed1 Btrfs: Deal with failed writes in mirrored configurations - introduced the max errors, leaves DUP and RAID1 in the same group Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 5808b14a ] Fix a use-after-free bug during filesystem initialisation, where we access the disc record (which is stored in a buffer) after we have released the buffer. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 78efb76a ] While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and DMA timeouts. Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes. Reported-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Analyzed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Petr Cvek authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit ba1bc0fc ] The modification of EXIN register doesn't clean the bitfield before the writing of a new value. After a few modifications the bitfield would accumulate only '1's. Signed-off-by:
Petr Cvek <petrcvekcz@gmail.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: hauke@hauke-m.de Cc: john@phrozen.org Cc: linux-mips@vger.kernel.org Cc: openwrt-devel@lists.openwrt.org Cc: pakahmar@hotmail.com Signed-off-by:
-
Prarit Bhargava authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 6e6de3de ] Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and linux guests boot with repeated errors: amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2) amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2) The warnings occur because the module code erroneously returns -EEXIST for modules that have failed to load and are in the process of being removed from the module list. module amd64_edac_mod has a dependency on module edac_mce_amd. Using modules.dep, systemd will load edac_mce_amd for every request of amd64_edac_mod. When the edac_mce_amd module loads, the module has state MODULE_STATE_UNFORMED and once the module load fails and the state becomes MODULE_STATE_GOING. Another request for edac_mce_amd module executes and add_unformed_module() will erroneously return -EEXIST even though the previous instance of edac_mce_amd has MODULE_STATE_GOING. Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which fails because of unknown symbols from edac_mce_amd. add_unformed_module() must wait to return for any case other than MODULE_STATE_LIVE to prevent a race between multiple loads of dependent modules. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Barret Rhoden <brho@google.com> Cc: David Arcari <darcari@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Jessica Yu <jeyu@kernel.org> Signed-off-by:
-
Douglas Anderson authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit 8ef1ba39 ] This is similar to commit e6186820 ("arm64: dts: rockchip: Arch counter doesn't tick in system suspend"). Specifically on the rk3288 it can be seen that the timer stops ticking in suspend if we end up running through the "osc_disable" path in rk3288_slp_mode_set(). In that path the 24 MHz clock will turn off and the timer stops. To test this, I ran this on a Chrome OS filesystem: before=$(date); \ suspend_stress_test -c1 --suspend_min=30 --suspend_max=31; \ echo ${before}; date ...and I found that unless I plug in a device that requests USB wakeup to be active that the two calls to "date" would show that fewer than 30 seconds passed. NOTE: deep suspend (where the 24 MHz clock gets disabled) isn't supported yet on upstream Linux so this was tested on a downstream kernel. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1840289 [ Upstream commit ffd9a1ba ] DMA got broken a while back in two different ways: 1) a change in the behaviour of disable_irq() to wait for the interrupt to finish executing causes us to deadlock at the end of DMA. 2) a change to avoid modifying the scatterlist left the first transfer uninitialised. DMA is only used with expansion cards, so has gone unnoticed. Fixes: fa4e9989 ("[ARM] dma: RiscPC: don't modify DMA SG entries") Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1840081Signed-off-by:
-
Yan, Zheng authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit d6e47819 upstream. ceph_d_revalidate(, LOOKUP_RCU) may call __ceph_caps_issued_mask() on a freeing inode. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Miroslav Lichvar authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 5515e9a6 upstream. The PPS assert/clear offset corrections are set by the PPS_SETPARAMS ioctl in the pps_ktime structs, which also contain flags. The flags are not initialized by applications (using the timepps.h header) and they are not used by the kernel for anything except returning them back in the PPS_GETPARAMS ioctl. Set the flags to zero to make it clear they are unused and avoid leaking uninitialized data of the PPS_SETPARAMS caller to other applications that have a read access to the PPS device. Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.comSigned-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Reviewed-by:
Rodolfo Giometti <giometti@enneenne.com> Cc: Greg KH <greg@kroah.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 16d51a59 upstream. When going through execve(), zero out the NUMA fault statistics instead of freeing them. During execve, the task is reachable through procfs and the scheduler. A concurrent /proc/*/sched reader can read data from a freed ->numa_faults allocation (confirmed by KASAN) and write it back to userspace. I believe that it would also be possible for a use-after-free read to occur through a race between a NUMA fault and execve(): task_numa_fault() can lead to task_numa_compare(), which invokes task_weight() on the currently running task of a different CPU. Another way to fix this would be to make ->numa_faults RCU-managed or add extra locking, but it seems easier to wipe the NUMA fault statistics on execve. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Vladis Dronov authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit b36a1552 upstream. Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset() functions which are called by the certain HCI UART protocols (hci_ath, hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control() or directly. This leads to an execution at NULL and can be triggered by an unprivileged user. Fix this by adding a helper function and a check for the missing tty operations in the protocols code. This fixes CVE-2019-10207. The Fixes: lines list commits where calls to tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART protocols. Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50 Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # v2.6.36+ Fixes: b3190df6 ("Bluetooth: Support for Atheros AR300x serial chip") Fixes: 118612fb ("Bluetooth: hci_bcm: Add suspend/resume PM functions") Fixes: ff289559 ("Bluetooth: hci_intel: Add Intel baudrate configuration support") Fixes: 162f812f ("Bluetooth: hci_uart: Add Marvell support") Fixes: fa9ad876 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Reviewed-by:
Yu-Chen, Cho <acho@suse.com> Tested-by:
-
Luke Nowakowski-Krijger authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit c666355e upstream. Change devm_k*alloc to k*alloc to manually allocate memory The manual allocation and freeing of memory is necessary because when the USB radio is disconnected, the memory associated with devm_k*alloc is freed. Meaning if we still have unresolved references to the radio device, then we get use-after-free errors. This patch fixes this by manually allocating memory, and freeing it in the v4l2.release callback that gets called when the last radio device exits. Reported-and-tested-by: syzbot+a4387f5b6b799f6becbf@syzkaller.appspotmail.com Signed-off-by:
Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: cleaned up two small checkpatch.pl warnings] [hverkuil-cisco@xs4all.nl: prefix subject with driver name] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit eff73de2 upstream. Kasan reported a use after free in cpia2_usb_disconnect() It first freed everything and then woke up those waiting. The reverse order is correct. Fixes: 6c493f8b ("[media] cpia2: major overhaul to get it in a working state again") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+0c90fc937c84f97d0aa6@syzkaller.appspotmail.com Signed-off-by:
-
Phong Tran authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit f384e62a upstream. The syzbot test with random endpoint address which made the idx is overflow in the table of endpoint configuations. this adds the checking for fixing the error report from syzbot KASAN: stack-out-of-bounds Read in hfcsusb_probe [1] The patch tested by syzbot [2] Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com [1]: https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522 [2]: https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJSigned-off-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit dbbf2d1e ] tcp_write_queue_purge clears all the SKBs in the write queue but does not reset the sk_send_head. As a result, we can have a NULL pointer dereference anywhere that we use tcp_send_head instead of the tcp_write_queue_tail. For example, after a27fd7a8 (tcp: purge write queue upon RST), we can purge the write queue on RST. Prior to 75c119af (tcp: implement rb-tree based retransmit queue), tcp_push will only check tcp_send_head and then accesses tcp_write_queue_tail to send the actual SKB. As a result, it will dereference a NULL pointer. This has been reported twice for 4.14 where we don't have 75c119af: By Timofey Titovets: [ 422.081094] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 [ 422.081254] IP: tcp_push+0x42/0x110 [ 422.081314] PGD 0 P4D 0 [ 422.081364] Oops: 0002 [#1] SMP PTI By Yongjian Xu: BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: tcp_push+0x48/0x120 PGD 80000007ff77b067 P4D 80000007ff77b067 PUD 7fd989067 PMD 0 Oops: 0002 [#18] SMP PTI Modules linked in: tcp_diag inet_diag tcp_bbr sch_fq iTCO_wdt iTCO_vendor_support pcspkr ixgbe mdio i2c_i801 lpc_ich joydev input_leds shpchp e1000e igb dca ptp pps_core hwmon mei_me mei ipmi_si ipmi_msghandler sg ses scsi_transport_sas enclosure ext4 jbd2 mbcache sd_mod ahci libahci megaraid_sas wmi ast ttm dm_mirror dm_region_hash dm_log dm_mod dax CPU: 6 PID: 14156 Comm: [ET_NET 6] Tainted: G D 4.14.26-1.el6.x86_64 #1 Hardware name: LENOVO ThinkServer RD440 /ThinkServer RD440, BIOS A0TS80A 09/22/2014 task: ffff8807d78d8140 task.stack: ffffc9000e944000 RIP: 0010:tcp_push+0x48/0x120 RSP: 0018:ffffc9000e947a88 EFLAGS: 00010246 RAX: 00000000000005b4 RBX: ffff880f7cce9c00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff8807d00f5000 RBP: ffffc9000e947aa8 R08: 0000000000001c84 R09: 0000000000000000 R10: ffff8807d00f5158 R11: 0000000000000000 R12: ffff8807d00f5000 R13: 0000000000000020 R14: 00000000000256d4 R15: 0000000000000000 FS: 00007f5916de9700(0000) GS:ffff88107fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000007f8226004 CR4: 00000000001606e0 Call Trace: tcp_sendmsg_locked+0x33d/0xe50 tcp_sendmsg+0x37/0x60 inet_sendmsg+0x39/0xc0 sock_sendmsg+0x49/0x60 sock_write_iter+0xb6/0x100 do_iter_readv_writev+0xec/0x130 ? rw_verify_area+0x49/0xb0 do_iter_write+0x97/0xd0 vfs_writev+0x7e/0xe0 ? __wake_up_common_lock+0x80/0xa0 ? __fget_light+0x2c/0x70 ? __do_page_fault+0x1e7/0x530 do_writev+0x60/0xf0 ? inet_shutdown+0xac/0x110 SyS_writev+0x10/0x20 do_syscall_64+0x6f/0x140 ? prepare_exit_to_usermode+0x8b/0xa0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x3135ce0c57 RSP: 002b:00007f5916de4b00 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000003135ce0c57 RDX: 0000000000000002 RSI: 00007f5916de4b90 RDI: 000000000000606f RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f5916de8c38 R10: 0000000000000000 R11: 0000000000000293 R12: 00000000000464cc R13: 00007f5916de8c30 R14: 00007f58d8bef080 R15: 0000000000000002 Code: 48 8b 97 60 01 00 00 4c 8d 97 58 01 00 00 41 b9 00 00 00 00 41 89 f3 4c 39 d2 49 0f 44 d1 41 81 e3 00 80 00 00 0f 85 b0 00 00 00 <80> 4a 38 08 44 8b 8f 74 06 00 00 44 89 8f 7c 06 00 00 83 e6 01 RIP: tcp_push+0x48/0x120 RSP: ffffc9000e947a88 CR2: 0000000000000038 ---[ end trace 8d545c2e93515549 ]--- There is other scenario which found in stable 4.4: Allocated: [<ffffffff82f380a6>] __alloc_skb+0xe6/0x600 net/core/skbuff.c:218 [<ffffffff832466c3>] alloc_skb_fclone include/linux/skbuff.h:856 [inline] [<ffffffff832466c3>] sk_stream_alloc_skb+0xa3/0x5d0 net/ipv4/tcp.c:833 [<ffffffff83249164>] tcp_sendmsg+0xd34/0x2b00 net/ipv4/tcp.c:1178 [<ffffffff83300ef3>] inet_sendmsg+0x203/0x4d0 net/ipv4/af_inet.c:755 Freed: [<ffffffff82f372fd>] __kfree_skb+0x1d/0x20 net/core/skbuff.c:676 [<ffffffff83288834>] sk_wmem_free_skb include/net/sock.h:1447 [inline] [<ffffffff83288834>] tcp_write_queue_purge include/net/tcp.h:1460 [inline] [<ffffffff83288834>] tcp_connect_init net/ipv4/tcp_output.c:3122 [inline] [<ffffffff83288834>] tcp_connect+0xb24/0x30c0 net/ipv4/tcp_output.c:3261 [<ffffffff8329b991>] tcp_v4_connect+0xf31/0x1890 net/ipv4/tcp_ipv4.c:246 BUG: KASAN: use-after-free in tcp_skb_pcount include/net/tcp.h:796 [inline] BUG: KASAN: use-after-free in tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline] BUG: KASAN: use-after-free in tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056 [<ffffffff81515cd5>] kasan_report.cold.7+0x175/0x2f7 mm/kasan/report.c:408 [<ffffffff814f9784>] __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:427 [<ffffffff83286582>] tcp_skb_pcount include/net/tcp.h:796 [inline] [<ffffffff83286582>] tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline] [<ffffffff83286582>] tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056 [<ffffffff83287a40>] __tcp_push_pending_frames+0xa0/0x290 net/ipv4/tcp_output.c:2307 stable 4.4 and stable 4.9 don't have the commit abb4a8b8 ("tcp: purge write queue upon RST") which is referred in dbbf2d1e, in tcp_connect_init, it calls tcp_write_queue_purge, and does not reset sk_send_head, then UAF. stable 4.14 have the commit abb4a8b8 ("tcp: purge write queue upon RST"), in tcp_reset, it calls tcp_write_queue_purge(sk), and does not reset sk_send_head, then UAF. So this patch can be used to fix stable 4.4 and 4.9. Fixes: a27fd7a8 (tcp: purge write queue upon RST) Reported-by:
Timofey Titovets <nefelim4ag@gmail.com> Reported-by:
Yongjian Xu <yongjianchn@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Tested-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 99253eb7 ] Commit 5e1859fb ("ipv4: ipmr: various fixes and cleanups") fixed the issue for ipv4 ipmr: ip_mroute_setsockopt() & ip_mroute_getsockopt() should not access/set raw_sk(sk)->ipmr_table before making sure the socket is a raw socket, and protocol is IGMP The same fix should be done for ipv6 ipmr as well. This patch can fix the panic caused by overwriting the same offset as ipmr_table as in raw_sk(sk) when accessing other type's socket by ip_mroute_setsockopt(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit f01f17d3 upstream. Mike has reported a considerable overhead of refresh_cpu_vm_stats from the idle entry during pipe test: 12.89% [kernel] [k] refresh_cpu_vm_stats.isra.12 4.75% [kernel] [k] __schedule 4.70% [kernel] [k] mutex_unlock 3.14% [kernel] [k] __switch_to This is caused by commit 0eb77e98 ("vmstat: make vmstat_updater deferrable again and shut down on idle") which has placed quiet_vmstat into cpu_idle_loop. The main reason here seems to be that the idle entry has to get over all zones and perform atomic operations for each vmstat entry even though there might be no per cpu diffs. This is a pointless overhead for _each_ idle entry. Make sure that quiet_vmstat is as light as possible. First of all it doesn't make any sense to do any local sync if the current cpu is already set in oncpu_stat_off because vmstat_update puts itself there only if there is nothing to do. Then we can check need_update which should be a cheap way to check for potential per-cpu diffs and only then do refresh_cpu_vm_stats. The original patch also did cancel_delayed_work which we are not doing here. There are two reasons for that. Firstly cancel_delayed_work from idle context will blow up on RT kernels (reported by Mike): CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.5.0-rt3 #7 Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013 Call Trace: dump_stack+0x49/0x67 ___might_sleep+0xf5/0x180 rt_spin_lock+0x20/0x50 try_to_grab_pending+0x69/0x240 cancel_delayed_work+0x26/0xe0 quiet_vmstat+0x75/0xa0 cpu_idle_loop+0x38/0x3e0 cpu_startup_entry+0x13/0x20 start_secondary+0x114/0x140 And secondly, even on !RT kernels it might add some non trivial overhead which is not necessary. Even if the vmstat worker wakes up and preempts idle then it will be most likely a single shot noop because the stats were already synced and so it would end up on the oncpu_stat_off anyway. We just need to teach both vmstat_shepherd and vmstat_update to stop scheduling the worker if there is nothing to do. [mgalbraith@suse.de: cancel pending work of the cpu_stat_off CPU] Signed-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Mike Galbraith <mgalbraith@suse.de> Signed-off-by:
Daniel Wagner <wagi@monom.org> Signed-off-by:
-
Christoph Lameter authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 587198ba upstream. If we detect that there is nothing to do just set the flag and do not check if it was already set before. Races really do not matter. If the flag is set by any code then the shepherd will start dealing with the situation and reenable the vmstat workers when necessary again. Since commit 0eb77e98 ("vmstat: make vmstat_updater deferrable again and shut down on idle") quiet_vmstat might update cpu_stat_off and mark a particular cpu to be handled by vmstat_shepherd. This might trigger a VM_BUG_ON in vmstat_update because the work item might have been sleeping during the idle period and see the cpu_stat_off updated after the wake up. The VM_BUG_ON is therefore misleading and no more appropriate. Moreover it doesn't really suite any protection from real bugs because vmstat_shepherd will simply reschedule the vmstat_work anytime it sees a particular cpu set or vmstat_update would do the same from the worker context directly. Even when the two would race the result wouldn't be incorrect as the counters update is fully idempotent. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit d7852fbd upstream. It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU work because it installs a temporary credential that gets allocated and freed for each system call. The allocation and freeing overhead is mostly benign, but because credentials can be accessed under the RCU read lock, the freeing involves a RCU grace period. Which is not a huge deal normally, but if you have a lot of access() calls, this causes a fair amount of seconday damage: instead of having a nice alloc/free patterns that hits in hot per-CPU slab caches, you have all those delayed free's, and on big machines with hundreds of cores, the RCU overhead can end up being enormous. But it turns out that all of this is entirely unnecessary. Exactly because access() only installs the credential as the thread-local subjective credential, the temporary cred pointer doesn't actually need to be RCU free'd at all. Once we're done using it, we can just free it synchronously and avoid all the RCU overhead. So add a 'non_rcu' flag to 'struct cred', which can be set by users that know they only use it in non-RCU context (there are other potential users for this). We can make it a union with the rcu freeing list head that we need for the RCU case, so this doesn't need any extra storage. Note that this also makes 'get_current_cred()' clear the new non_rcu flag, in case we have filesystems that take a long-term reference to the cred and then expect the RCU delayed freeing afterwards. It's not entirely clear that this is required, but it makes for clear semantics: the subjective cred remains non-RCU as long as you only access it synchronously using the thread-local accessors, but you _can_ use it as a generic cred if you want to. It is possible that we should just remove the whole RCU markings for ->cred entirely. Only ->real_cred is really supposed to be accessed through RCU, and the long-term cred copies that nfs uses might want to explicitly re-enable RCU freeing if required, rather than have get_current_cred() do it implicitly. But this is a "minimal semantic changes" change for the immediate problem. Acked-by:
-
Hui Wang authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 3f880949 upstream. This conexant codec isn't in the supported codec list yet, the hda generic driver can drive this codec well, but on a Lenovo machine with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI to make the leds work. After adding this codec to the list, the driver patch_conexant.c will apply THINKPAD_ACPI to this machine. Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 70256b42 upstream. Commit 7b9584fa ("staging: line6: Move altsetting to properties") set a wrong altsetting for LINE6_PODHD500_1 during refactoring. Set the correct altsetting number to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1790595 Fixes: 7b9584fa ("staging: line6: Move altsetting to properties") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kefeng Wang authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 0c7d37f4 upstream. The base value in do_div() called by hpet_time_div() is truncated from unsigned long to uint32_t, resulting in a divide-by-zero exception. UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2 division by zero CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0 Call Trace: [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline] [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline] [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline] [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline] [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline] [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613 [<ffffffff82846003>] tracesys_phase2+0x90/0x95 The main C reproducer autogenerated by syzkaller, syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); memcpy((void*)0x20000100, "/dev/hpet\000", 10); syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0); syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000); Fix it by using div64_ul(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Zhang HongJun <zhanghongjun2@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
