Some platforms have separated the end-of-conversion information from the
usual ISR/IMR/IER/IDR registers, into EOC_ISR/EOC_IMR/EOC_IER/EOC_IDR.
To cope with both variants, helpers are being added, that will make
code more clear and more easy to read.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20210901123013.329792-6-eugen.hristev@microchip.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Convert the driver to platform specific structures. This means:
- create a register layout struct that will hold offsets for registers
- create a platform struct that will hold platform information (number of
channels, indexes for different channels and pointer to layout struct)
- convert specific macros that are platform dependent into platform variables

This step is in fact a no-op, but allows the driver to be more flexible
and for future enhancement including adding new platforms that are partly
compatible with the current driver and differ slightly in register layout
or capabilities for example.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20210901123013.329792-5-eugen.hristev@microchip.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Remove unused register definition
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20210901123013.329792-4-eugen.hristev@microchip.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The hw_init hardware init call must happen after the clock is prepared and
enabled. Otherwise, writing to the registers might lead to a block or
external abort.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20210901123013.329792-3-eugen.hristev@microchip.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add compatible for microchip,sama7g5-adc device.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20210901123013.329792-2-eugen.hristev@microchip.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add additional AK09116 to the magnetometer driver which has the same
register mapping and scaling as the AK09112 device.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210825020738.35877-1-matt.ranostay@konsulko.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add DT bindings for MAXIM max31865 RTD sensor.
Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210824050650.72619-1-navin@linumiz.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch adds support for Maxim MAX31865 RTD temperature
sensor support.

More information can be found in:
https://datasheets.maximintegrated.com/en/ds/MAX31865.pdfSigned-off-by: Navin Sankar Velliangiri <navin@linumiz.com>
Link: https://lore.kernel.org/r/20210824050123.71289-1-navin@linumiz.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use the defined variable "dev" to make the code cleaner.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20210823095921.16828-1-tangbin@cmss.chinamobile.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Remove braces from single line if blocks to clear checkpatch warnings.
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Alexander Vorwerk <alec@vc-celle.de>
Link: https://lore.kernel.org/r/20210820224914.1260-1-alec@vc-celle.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

If there are no channels defined in the devicetree, there's no point in
probing the device. We were actually requesting a zero sized 'kmalloc'
array but since we were not touching the ZERO_SIZE_PTR afterwards,
nothing bad was actually happening. Hence this is not really a fix but
rather an improvement.
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210825084149.11587-2-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Check if an optional reset gpio is present and if so, make sure to reset
the device.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210825084149.11587-1-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The bindings file for this driver is defining the property as 'reg' but
the driver was reading it with the 'num' name. The bindings actually had
the 'num' property when added in
commit ea52c212 ("dt-bindings: iio: dac: Add docs for AD5770R DAC")
and then changed it to 'reg' in
commit 2cf3818f ("dt-bindings: iio: dac: AD5570R fix bindings errors").
However, both these commits landed in v5.7 so the assumption is
that either 'num' is not being used or if it is, the validations were not
done.

Anyways, if someone comes back yelling about this, we might just support
both of the properties in the future. Not ideal, but that's life...

Fixes: 2cf3818f ("dt-bindings: iio: dac: AD5570R fix bindings errors")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210818080525.62790-1-nuno.sa@analog.com
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Commit b1fe0cf0 ("Input: delete MPU3050 driver") deletes the superseded
MPU3050 driver and its corresponding config INPUT_MPU3050.

The dependencies on the superseding driver in ./drivers/iio/gyro/Kconfig
to ensure that the two drivers are not built into the same kernel is a dead
dependency and not required anymore.

So, remove those config dependencies on INPUT_MPU3050 for MPU3050_I2C.

This issue was detected with ./scripts/checkkconfigsymbols.py.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210817081330.9645-1-lukas.bulwahn@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The idea behind it, is that all devm_ calls in ST sensors are bound to the
parent device object.

However, the reference to that object is kept on both the st_sensor_data
struct and the IIO object parent (indio_dev->dev.parent).

This change only adds a bit consistency and uses the reference stored on
indio_dev->dev.parent, to enforce the assumption that all ST sensors' devm_
calls are bound to the same reference as the one store on st_sensor_data.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-6-aardelean@deviqon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

At this point all ST driver remove functions do iio_device_unregister().
This change removes them from them and replaces all iio_device_register()
with devm_iio_device_register().

This can be done in a single change relatively easy, since all these remove
functions are define in st_sensors.h.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-5-aardelean@deviqon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This change converts the st_sensors_power_enable() function to use
devm_add_action_or_reset() handlers to register regulator_disable hooks for
when the drivers get unloaded.

The parent device of the IIO device object is used. This is based on the
assumption that all other devm_ calls in the ST sensors use this reference.

This makes the st_sensors_power_disable() un-needed.
Removing this also changes unload order a bit, as all ST drivers would call
st_sensors_power_disable() first and iio_device_unregister() after that.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-4-aardelean@deviqon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This change converts the st_sensors_allocate_trigger() to use
device-managed functions.

The parent device of the IIO device object is used. This is based on the
assumption that all other devm_ calls in the ST sensors use this reference.

That makes the st_sensors_deallocate_trigger() function un-needed, so it
can be removed.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-3-aardelean@deviqon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Up until commit ea7e586b ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any regulator
disable. After that commit, the regulator handling was moved into the
common st_sensors logic.

In all instances of this regulator handling, the regulators were disabled
before unregistering the IIO device.
This can cause issues where the device would be powered down and still be
available to userspace, allowing it to send invalid/garbage data.

This change moves the st_sensors_power_disable() after the common probe
functions. These common probe functions also handle unregistering the IIO
device.

Fixes: 77448761 ("iio: pressure-core: st: Provide support for the Vdd power supply")
Fixes: ea7e586b ("iio: st_sensors: move regulator retrieveal to core")
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210823112204.243255-2-aardelean@deviqon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Switch to devm_iio_device_register to finalize devm migration.
This removes the use for iio_device_unregister() and since
mutex_destroy() is not necessary here, remove it altogether.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Link: https://lore.kernel.org/r/20210815213309.2847711-6-liambeguin@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Update bindings to describe support for buffered and unbuffered external
voltage references selection, and add adi,internal-ref-microvolt for
internal voltage reference selection.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210815213309.2847711-5-liambeguin@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for selecting the voltage reference from the devicetree.

This change is required to get valid readings with all three
vref hardware configurations supported by the ADC.

For instance if the ADC isn't provided with an external reference,
the sample request must specify an internal voltage reference to get a
valid reading.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Link: https://lore.kernel.org/r/20210815213309.2847711-4-liambeguin@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver supports devices with 14-bit and 16-bit sample sizes.
This implies different SPI transfer lengths which are not always handled
properly by some SPI controllers.

To work around this limitation, define a big endian buffer used to split
the buffer into two 8-bit messages in the event that the controller
doesn't support 14-bit or 16-bit transfers.
A separate buffer is introduced here to avoid performing operations on
types of different endianness.

Since all transfers use the same bits_per_word value, move that logic to
the probe function, and let transfers default to the value defined in
the struct spi_device.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Link: https://lore.kernel.org/r/20210815213309.2847711-3-liambeguin@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Replace raw configuration register values by using FIELD_PREP and
defines to improve readability.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Link: https://lore.kernel.org/r/20210815213309.2847711-2-liambeguin@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. So, remove all the uses and add
devm_kstrdup() or devm_kasprintf() instead.

Also, modify the "for" loop conditions to clarify the access to the
st->orientation.rotation buffer.

This patch is an effort to clean up the proliferation of str*()
functions in the kernel and a previous step in the path to remove
the strcpy function from the kernel entirely [1].

[1] https://github.com/KSPP/linux/issues/88Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210815174204.126593-1-len.baker@gmx.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ADXL355 is a 3-axis MEMS Accelerometer. It offers low noise density,
low 0g offset drift, low power with selectable measurement ranges.
It also features programmable high-pass and low-pass filters.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdfReviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20210811073027.124619-3-puranjay12@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210811073027.124619-2-puranjay12@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
 "Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Pull IPMI updates from Corey Minyard:
 "A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Pull scheduler fixes from Borislav Petkov:

 - Make sure the idle timer expires in hardirq context, on PREEMPT_RT

 - Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Pull locking fixes from Borislav Petkov:

 - Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

 - Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

 - Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Pull timer fix from Borislav Petkov:

 - Handle negative second values properly when converting a timespec64
   to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Handle negative seconds correctly in timespec64_to_ns()

Pull namei updates from Al Viro:
 "Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

Pull virtio updates from Michael Tsirkin:

 - vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

 - virtio-vsock support for end of record with SEQPACKET

 - vdpa: mac and mq support for ifcvf and mlx5

 - vdpa: management netlink for ifcvf

 - virtio-i2c, gpio dt bindings

 - misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...