- 30 Oct, 2020 30 commits
-
-
Nikolay Aleksandrov authored
The test checks for the following case: state report result action EXCLUDE (X,Y) IS_IN (A) EXCLUDE (X+A,Y-A) (A)=GMI Signed-off-by:Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Nikolay Aleksandrov authored
The test checks for the following case: state report result action EXCLUDE (X,Y) ALLOW (A) EXCLUDE (X+A,Y-A) (A)=GMI Signed-off-by:
-
Nikolay Aleksandrov authored
The test checks for the following case: state report result action INCLUDE (A) TO_EX (B) EXCLUDE (A*B,B-A) (B-A)=0 Delete (A-B) Send Q(G,A*B) Group Timer=GMI Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action INCLUDE (A) IS_EX (B) EXCLUDE (A*B,B-A) (B-A)=0 Delete (A-B) Group Timer=GMI Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=GMI Signed-off-by:
-
Nikolay Aleksandrov authored
First we test is_include/include mode then we build on that with allow effectively achieving: state report result action INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=GMI Signed-off-by:
-
Nikolay Aleksandrov authored
Add helpers which will be used in subsequent tests, they are: - check_sg_entries: check for proper source list and S,G entry existence - check_sg_fwding: check for proper traffic forwarding/blocking - check_sg_state: check for proper blocked/forwarding entry state Signed-off-by:
-
Nikolay Aleksandrov authored
We have to specifically check for udp protocol in addition to the mac address because in IGMPv3 tests group-specific queries will use the same mac address. Signed-off-by:
-
Nikolay Aleksandrov authored
Add support for one more argument which specifies the source address to use. It will be later used for IGMPv3 S,G entry testing. Signed-off-by:
-
Nikolay Aleksandrov authored
To prepare the bridge_igmp.sh for IGMPv3 we need to rename the current test to IGMPv2. Signed-off-by:
-
Andy Shevchenko authored
Refactor phy_led_trigger_register() and deduplicate its functionality when registering LED trigger for link. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201027182146.21355-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Vineetha G. Jaya Kumaran authored
This patch enables the HW LPI Timer which controls the automatic entry and exit of the LPI state. The EEE LPI timer value is configured through ethtool. The driver will auto select the LPI HW timer if the value in the HW timer supported range. Else, the driver will fallback to SW timer. Signed-off-by:
Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Link: https://lore.kernel.org/r/20201027160051.22898-1-weifeng.voon@intel.comSigned-off-by:
-
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playgroundJakub Kicinski authored
Arnd Bergmann says: ==================== wimax: move to staging After I sent a fix for what appeared to be a harmless warning in the wimax user interface code, the conclusion was that the whole thing has most likely not been used in a very long time, and the user interface possibly been broken since b61a5eea ("wimax: use genl_register_family_with_ops()"). Using a shared branch between net-next and staging should help coordinate patches getting submitted against it. ==================== Signed-off-by:
-
Jon Maloy authored
TIPC reserves 64 service types for current and future internal use. Therefore, the bind() function is meant to block regular user sockets from being bound to these values, while it should let through such bindings from internal users. However, since we at the design moment saw no way to distinguish between regular and internal users the filter function ended up with allowing all bindings of the reserved types which were really in use ([0,1]), and block all the rest ([2,63]). This is risky, since a regular user may bind to the service type representing the topology server (TIPC_TOP_SRV == 1) or the one used for indicating neighboring node status (TIPC_CFG_SRV == 0), and wreak havoc for users of those services, i.e., most users. The reality is however that TIPC_CFG_SRV never is bound through the bind() function, since it doesn't represent a regular socket, and TIPC_TOP_SRV can also be made to bypass the checks in tipc_bind() by introducing a different entry function, tipc_sk_bind(). It should be noted that although this is a change of the API semantics, there is no risk we will break any currently working applications by doing this. Any application trying to bind to the values in question would be badly broken from the outset, so there is no chance we would find any such applications in real-world production systems. v2: Added warning printout when a user is blocked from binding, as suggested by Jakub Kicinski Acked-by:Yung Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/20201030012938.489557-1-jmaloy@redhat.comSigned-off-by:
-
Zhang Qilong authored
The 'break' is unnecessary because of previous 'return', and we could discard it. Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201027135159.71444-1-zhangqilong3@huawei.comSigned-off-by:
-
Łukasz Stelmach authored
Unify the set of information returned by mii_ethtool_get_link_ksettings(), mii_ethtool_gset() and phy_ethtool_ksettings_get(). Make the mii_*() functions report advertised settings when autonegotiation if disabled. Suggested-by:
Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by:
-
Jakub Kicinski authored
Henrik Bjoernlund says: ==================== net: bridge: cfm: Add support for Connectivity Fault Management(CFM) Connectivity Fault Management (CFM) is defined in 802.1Q section 12.14. Connectivity Fault Management (CFM) comprises capabilities for detecting, verifying, and isolating connectivity failures in Virtual Bridged Networks. These capabilities can be used in networks operated by multiple independent organizations, each with restricted management access to each other’s equipment. CFM functions are partitioned as follows: — Path discovery — Fault detection — Fault verification and isolation — Fault notification — Fault recovery The primary CFM protocol shims are called Maintenance Points (MPs). A MP can be either a MEP or a MHF. The MEP: -It is the Maintenance association End Point described in 802.1Q section 19.2. -It is created on a specific level (1-7) and is assuring that no CFM frames are passing through this MEP on lower levels. -It initiates and terminates/validates CFM frames on its level. -It can only exist on a port that is related to a bridge. The MHF: -It is the Maintenance Domain Intermediate Point (MIP) Half Function (MHF) described in 802.1Q section 19.3. -It is created on a specific level (1-7). -It is extracting/injecting certain CFM frame on this level. -It can only exist on a port that is related to a bridge. -Currently not supported. There are defined the following CFM protocol functions: -Continuity Check -Loopback. Currently not supported. -Linktrace. Currently not supported. This CFM component supports create/delete of MEP instances and configuration of the different CFM protocols. Also status information can be fetched and delivered through notification due to defect status change. The user interacts with CFM using the 'cfm' user space client program, the client talks with the kernel using netlink. Any notification emitted by CFM from the kernel can be monitored in user space by starting 'cfm_server' program. Currently this 'cfm' and 'cfm_server' programs are standalone placed in a cfm repository https://github.com/microchip-ung/cfm but it is considered to integrate this into 'iproute2'. v1 -> v2 Added the CFM switchdev interface and also added utilization by calling the interface from the kernel CFM implementation trying to offload CFM functionality to HW. This offload (CFM driver) is currently not implemented. Corrections based on RCF comments: -The single CFM kernel implementation Patch is broken up into three patches. -Changed the list of MEP instances from list_head to hlist_head. -Removed unnecessary RCU list traversing. -Solved RCU unlocking problem. -Removed unnecessary comments. -Added ASSERT_RTNL() where required. -Shaping up on error messages. -Correction NETLINK br_fill_ifinfo() to be able to handle 'filter_mask' with multiple flags asserted. v2 -> v3 -The switchdev definition and utilization has been removed as there was no switchdev implementation. -Some compiling issues are fixed as Reported-by: kernel test robot <lkp@intel.com>. v3 -> v4 -Fixed potential crash during hlist walk where elements are removed. -Giving all commits unique titles. -NETLINK implementation split into three commits. -Commit "bridge: cfm: Bridge port remove" is merged with commit "bridge: cfm: Kernel space implementation of CFM. MEP create/delete." v4 -> v5 -Reordered members in struct net_bridge to bring member frame_type_list to the first cache line. -Helper functions nla_get_mac() and nla_get_maid() are removed. -The NLA_POLICY_NESTED() macro is used to initialize the br_cfm_policy array. -Fixed reverse xmas tree. v5 -> v6 -Fixed that the SKB buffer was not freed during error handling return. -Removed unused struct definition. -Changed bool to u8 bitfields for space save. -Utilizing the NETLINK policy validation feature. v6 -> v7 -Removed check of parameters in br_cfm_mep_config_set() and br_cfm_cc_peer_mep_add() in first commit of MEP implementation (Patch 4 out of 10) Reviewed-by:Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
Henrik Bjoernlund <henrik.bjoernlund@microchip.com> ==================== Link: https://lore.kernel.org/r/20201027100251.3241719-1-henrik.bjoernlund@microchip.comSigned-off-by:
-
Henrik Bjoernlund authored
This is the implementation of Netlink notifications out of CFM. Notifications are initiated whenever a state change happens in CFM. IFLA_BRIDGE_CFM: Points to the CFM information. IFLA_BRIDGE_CFM_MEP_STATUS_INFO: This indicate that the MEP instance status are following. IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO: This indicate that the peer MEP status are following. CFM nested attribute has the following attributes in next level. IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is NLA_U32. IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected Opcode. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected version. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN: The MEP instance received CCM PDU with MD level lower than configured level. This frame is discarded. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is NLA_U32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID: The added Peer MEP ID of the delivered status. The type is NLA_U32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT: The CCM defect status. The type is NLA_U32 (bool). True means no CCM frame is received for 3.25 intervals. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL. IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI: The last received CCM PDU RDI. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE: The last received CCM PDU Port Status TLV value field. The type is NLA_U8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE: The last received CCM PDU Interface Status TLV value field. The type is NLA_U8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN: A CCM frame has been received from Peer MEP. The type is NLA_U32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN: A CCM frame with TLV has been received from Peer MEP. The type is NLA_U32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN: A CCM frame with unexpected sequence number has been received from Peer MEP. The type is NLA_U32 (bool). When a sequence number is not one higher than previously received then it is unexpected. This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. Signed-off-by: -
Henrik Bjoernlund authored
This is the implementation of CFM netlink status get information interface. Add new nested netlink attributes. These attributes are used by the user space to get status information. GETLINK: Request filter RTEXT_FILTER_CFM_STATUS: Indicating that CFM status information must be delivered. IFLA_BRIDGE_CFM: Points to the CFM information. IFLA_BRIDGE_CFM_MEP_STATUS_INFO: This indicate that the MEP instance status are following. IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO: This indicate that the peer MEP status are following. CFM nested attribute has the following attributes in next level. GETLINK RTEXT_FILTER_CFM_STATUS: IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is u32. IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected Opcode. The type is u32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected version. The type is u32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN: The MEP instance received CCM PDU with MD level lower than configured level. This frame is discarded. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID: The added Peer MEP ID of the delivered status. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT: The CCM defect status. The type is u32 (bool). True means no CCM frame is received for 3.25 intervals. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL. IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI: The last received CCM PDU RDI. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE: The last received CCM PDU Port Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE: The last received CCM PDU Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN: A CCM frame has been received from Peer MEP. The type is u32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN: A CCM frame with TLV has been received from Peer MEP. The type is u32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN: A CCM frame with unexpected sequence number has been received from Peer MEP. The type is u32 (bool). When a sequence number is not one higher than previously received then it is unexpected. This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. Signed-off-by: -
Henrik Bjoernlund authored
This is the implementation of CFM netlink configuration get information interface. Add new nested netlink attributes. These attributes are used by the user space to get configuration information. GETLINK: Request filter RTEXT_FILTER_CFM_CONFIG: Indicating that CFM configuration information must be delivered. IFLA_BRIDGE_CFM: Points to the CFM information. IFLA_BRIDGE_CFM_MEP_CREATE_INFO: This indicate that MEP instance create parameters are following. IFLA_BRIDGE_CFM_MEP_CONFIG_INFO: This indicate that MEP instance config parameters are following. IFLA_BRIDGE_CFM_CC_CONFIG_INFO: This indicate that MEP instance CC functionality parameters are following. IFLA_BRIDGE_CFM_CC_RDI_INFO: This indicate that CC transmitted CCM PDU RDI parameters are following. IFLA_BRIDGE_CFM_CC_CCM_TX_INFO: This indicate that CC transmitted CCM PDU parameters are following. IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO: This indicate that the added peer MEP IDs are following. CFM nested attribute has the following attributes in next level. GETLINK RTEXT_FILTER_CFM_CONFIG: IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE: The created MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN: The created MEP domain. The type is u32 (br_cfm_domain). It must be BR_CFM_PORT. This means that CFM frames are transmitted and received directly on the port - untagged. Not in a VLAN. IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION: The created MEP direction. The type is u32 (br_cfm_mep_direction). It must be BR_CFM_MEP_DIRECTION_DOWN. This means that CFM frames are transmitted and received on the port. Not in the bridge. IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX: The created MEP residence port ifindex. The type is u32 (ifindex). IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE: The deleted MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC: The configured MEP unicast MAC address. The type is 6*u8 (array). This is used as SMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL: The configured MEP unicast MD level. The type is u32. It must be in the range 1-7. No CFM frames are passing through this MEP on lower levels. IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID: The configured MEP ID. The type is u32. It must be in the range 0-0x1FFF. This MEP ID is inserted in any transmitted CCM frame. IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE: The Continuity Check (CC) functionality is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL: The CC expected receive interval of CCM frames. The type is u32 (br_cfm_ccm_interval). This is also the transmission interval of CCM frames when enabled. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID: The CC expected receive MAID in CCM frames. The type is CFM_MAID_LENGTH*u8. This is MAID is also inserted in transmitted CCM frames. IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_MEPID: The CC Peer MEP ID added. The type is u32. When a Peer MEP ID is added and CC is enabled it is expected to receive CCM frames from that Peer MEP. IFLA_BRIDGE_CFM_CC_RDI_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_RDI_RDI: The RDI that is inserted in transmitted CCM PDU. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC: The transmitted CCM frame destination MAC address. The type is 6*u8 (array). This is used as DMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE: The transmitted CCM frame update (increment) of sequence number is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD: The period of time where CCM frame are transmitted. The type is u32. The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX must be done before timeout to keep transmission alive. When period is zero any ongoing CCM frame transmission will be stopped. IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV: The transmitted CCM frame update with Interface Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE: The transmitted Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV: The transmitted CCM frame update with Port Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE: The transmitted Port Status TLV value field. The type is u8. Signed-off-by: -
Henrik Bjoernlund authored
This is the implementation of CFM netlink configuration set information interface. Add new nested netlink attributes. These attributes are used by the user space to create/delete/configure CFM instances. SETLINK: IFLA_BRIDGE_CFM: Indicate that the following attributes are CFM. IFLA_BRIDGE_CFM_MEP_CREATE: This indicate that a MEP instance must be created. IFLA_BRIDGE_CFM_MEP_DELETE: This indicate that a MEP instance must be deleted. IFLA_BRIDGE_CFM_MEP_CONFIG: This indicate that a MEP instance must be configured. IFLA_BRIDGE_CFM_CC_CONFIG: This indicate that a MEP instance Continuity Check (CC) functionality must be configured. IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD: This indicate that a CC Peer MEP must be added. IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE: This indicate that a CC Peer MEP must be removed. IFLA_BRIDGE_CFM_CC_CCM_TX: This indicate that the CC transmitted CCM PDU must be configured. IFLA_BRIDGE_CFM_CC_RDI: This indicate that the CC transmitted CCM PDU RDI must be configured. CFM nested attribute has the following attributes in next level. SETLINK RTEXT_FILTER_CFM_CONFIG: IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE: The created MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN: The created MEP domain. The type is u32 (br_cfm_domain). It must be BR_CFM_PORT. This means that CFM frames are transmitted and received directly on the port - untagged. Not in a VLAN. IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION: The created MEP direction. The type is u32 (br_cfm_mep_direction). It must be BR_CFM_MEP_DIRECTION_DOWN. This means that CFM frames are transmitted and received on the port. Not in the bridge. IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX: The created MEP residence port ifindex. The type is u32 (ifindex). IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE: The deleted MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC: The configured MEP unicast MAC address. The type is 6*u8 (array). This is used as SMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL: The configured MEP unicast MD level. The type is u32. It must be in the range 1-7. No CFM frames are passing through this MEP on lower levels. IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID: The configured MEP ID. The type is u32. It must be in the range 0-0x1FFF. This MEP ID is inserted in any transmitted CCM frame. IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE: The Continuity Check (CC) functionality is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL: The CC expected receive interval of CCM frames. The type is u32 (br_cfm_ccm_interval). This is also the transmission interval of CCM frames when enabled. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID: The CC expected receive MAID in CCM frames. The type is CFM_MAID_LENGTH*u8. This is MAID is also inserted in transmitted CCM frames. IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_MEPID: The CC Peer MEP ID added. The type is u32. When a Peer MEP ID is added and CC is enabled it is expected to receive CCM frames from that Peer MEP. IFLA_BRIDGE_CFM_CC_RDI_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_RDI_RDI: The RDI that is inserted in transmitted CCM PDU. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC: The transmitted CCM frame destination MAC address. The type is 6*u8 (array). This is used as DMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE: The transmitted CCM frame update (increment) of sequence number is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD: The period of time where CCM frame are transmitted. The type is u32. The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX must be done before timeout to keep transmission alive. When period is zero any ongoing CCM frame transmission will be stopped. IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV: The transmitted CCM frame update with Interface Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE: The transmitted Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV: The transmitted CCM frame update with Port Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE: The transmitted Port Status TLV value field. The type is u8. Signed-off-by: -
Henrik Bjoernlund authored
This is the third commit of the implementation of the CFM protocol according to 802.1Q section 12.14. Functionality is extended with CCM frame reception. The MEP instance now contains CCM based status information. Most important is the CCM defect status indicating if correct CCM frames are received with the expected interval. Signed-off-by:
-
Henrik Bjoernlund authored
This is the second commit of the implementation of the CFM protocol according to 802.1Q section 12.14. Functionality is extended with CCM frame transmission. Interface is extended with these functions: br_cfm_cc_rdi_set() br_cfm_cc_ccm_tx() br_cfm_cc_config_set() A MEP Continuity Check feature can be configured by br_cfm_cc_config_set() The Continuity Check parameters can be configured to be used when transmitting CCM. A MEP can be configured to start or stop transmission of CCM frames by br_cfm_cc_ccm_tx() The CCM will be transmitted for a selected period in seconds. Must call this function before timeout to keep transmission alive. A MEP transmitting CCM can be configured with inserted RDI in PDU by br_cfm_cc_rdi_set() Signed-off-by: -
Henrik Bjoernlund authored
This is the first commit of the implementation of the CFM protocol according to 802.1Q section 12.14. It contains MEP instance create, delete and configuration. Connectivity Fault Management (CFM) comprises capabilities for detecting, verifying, and isolating connectivity failures in Virtual Bridged Networks. These capabilities can be used in networks operated by multiple independent organizations, each with restricted management access to each others equipment. CFM functions are partitioned as follows: - Path discovery - Fault detection - Fault verification and isolation - Fault notification - Fault recovery Interface consists of these functions: br_cfm_mep_create() br_cfm_mep_delete() br_cfm_mep_config_set() br_cfm_cc_config_set() br_cfm_cc_peer_mep_add() br_cfm_cc_peer_mep_remove() A MEP instance is created by br_cfm_mep_create() -It is the Maintenance association End Point described in 802.1Q section 19.2. -It is created on a specific level (1-7) and is assuring that no CFM frames are passing through this MEP on lower levels. -It initiates and validates CFM frames on its level. -It can only exist on a port that is related to a bridge. -Attributes given cannot be changed until the instance is deleted. A MEP instance can be deleted by br_cfm_mep_delete(). A created MEP instance has attributes that can be configured by br_cfm_mep_config_set(). A MEP Continuity Check feature can be configured by br_cfm_cc_config_set() The Continuity Check Receiver state machine can be enabled and disabled. According to 802.1Q section 19.2.8 A MEP can have Peer MEPs added and removed by br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove() The Continuity Check feature can maintain connectivity status on each added Peer MEP. Signed-off-by: -
Henrik Bjoernlund authored
This EtherType is used by all CFM protocal frames transmitted according to 802.1Q section 12.14. Signed-off-by:
-
Henrik Bjoernlund authored
This makes it possible to include or exclude the CFM protocol according to 802.1Q section 12.14. Signed-off-by:
-
Henrik Bjoernlund authored
This patch extends the processing of frames in the bridge. Currently MRP frames needs special processing and the current implementation doesn't allow a nice way to process different frame types. Therefore try to improve this by adding a list that contains frame types that need special processing. This list is iterated for each input frame and if there is a match based on frame type then these functions will be called and decide what to do with the frame. It can process the frame then the bridge doesn't need to do anything or don't process so then the bridge will do normal forwarding. Signed-off-by:
-
Jakub Kicinski authored
Colin Ian King says: ==================== vsock: minor clean up of ioctl error handling Two minor changes to the ioctl error handling. ==================== Link: https://lore.kernel.org/r/20201027090942.14916-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
Currently when an invalid ioctl command is used the error return is -EINVAL. Fix this by returning the correct error -ENOIOCTLCMD. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Colin Ian King authored
When exercising the kernel with stress-ng with some ioctl tests the "Unknown ioctl" error message is spamming the kernel log at a high rate. Remove this message. Signed-off-by:
-
- 29 Oct, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Signed-off-by: -
Linus Torvalds authored
Merge tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fix from Gustavo A. R. Silva: "This fixes a ton of fall-through warnings when building with Clang 12.0.0 and -Wimplicit-fallthrough" * tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: include: jhash/signal: Fix fall-through warnings for Clang
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Current release regressions: - r8169: fix forced threading conflicting with other shared interrupts; we tried to fix the use of raise_softirq_irqoff from an IRQ handler on RT by forcing hard irqs, but this driver shares legacy PCI IRQs so drop the _irqoff() instead - tipc: fix memory leak caused by a recent syzbot report fix to tipc_buf_append() Current release - bugs in new features: - devlink: Unlock on error in dumpit() and fix some error codes - net/smc: fix null pointer dereference in smc_listen_decline() Previous release - regressions: - tcp: Prevent low rmem stalls with SO_RCVLOWAT. - net: protect tcf_block_unbind with block lock - ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering to only send legal frames to the hypervisor was too strict - net: hns3: Clear the CMDQ registers before unmapping BAR region; incorrect cleanup order was leading to a crash - bnxt_en - handful of fixes to fixes: - Send HWRM_FUNC_RESET fw command unconditionally, even if there are PCIe errors being reported - Check abort error state in bnxt_open_nic(). - Invoke cancel_delayed_work_sync() for PFs also. - Fix regression in workqueue cleanup logic in bnxt_remove_one(). - mlxsw: Only advertise link modes supported by both driver and device, after removal of 56G support from the driver 56G was not cleared from advertised modes - net/smc: fix suppressed return code Previous release - always broken: - netem: fix zero division in tabledist, caused by integer overflow - bnxt_en: Re-write PCI BARs after PCI fatal error. - cxgb4: set up filter action after rewrites - net: ipa: command payloads already mapped Misc: - s390/ism: fix incorrect system EID, it's okay to change since it was added in current release - vsock: use ns_capable_noaudit() on socket create to suppress false positive audit messages" * tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) r8169: fix issue with forced threading in combination with shared interrupts netem: fix zero division in tabledist ibmvnic: fix ibmvnic_set_mac mptcp: add missing memory scheduling in the rx path tipc: fix memory leak caused by tipc_buf_append() gtp: fix an use-before-init in gtp_newlink() net: protect tcf_block_unbind with block lock ibmveth: Fix use of ibmveth in a bridge. net/sched: act_mpls: Add softdep on mpls_gso.ko ravb: Fix bit fields checking in ravb_hwtstamp_get() devlink: Unlock on error in dumpit() devlink: Fix some error codes chelsio/chtls: fix memory leaks in CPL handlers chelsio/chtls: fix deadlock issue net: hns3: Clear the CMDQ registers before unmapping BAR region bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally. bnxt_en: Check abort error state in bnxt_open_nic(). bnxt_en: Re-write PCI BARs after PCI fatal error. bnxt_en: Invoke cancel_delayed_work_sync() for PFs also. bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one(). ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "The good news is people are testing rc1 in the RDMA world - the bad news is testing of the for-next area is not as good as I had hoped, as we really should have caught at least the rdma_connect_locked() issue before now. Notable merge window regressions that didn't get caught/fixed in time for rc1: - Fix in kernel users of rxe, they were broken by the rapid fix to undo the uABI breakage in rxe from another patch - EFA userspace needs to read the GID table but was broken with the new GID table logic - Fix user triggerable deadlock in mlx5 using devlink reload - Fix deadlock in several ULPs using rdma_connect from the CM handler callbacks - Memory leak in qedr" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/qedr: Fix memory leak in iWARP CM RDMA: Add rdma_connect_locked() RDMA/uverbs: Fix false error in query gid IOCTL RDMA/mlx5: Fix devlink deadlock on net namespace deletion RDMA/rxe: Fix small problem in network_type patch -
Heiner Kallweit authored
As reported by Serge flag IRQF_NO_THREAD causes an error if the interrupt is actually shared and the other driver(s) don't have this flag set. This situation can occur if a PCI(e) legacy interrupt is used in combination with forced threading. There's no good way to deal with this properly, therefore we have to remove flag IRQF_NO_THREAD. For fixing the original forced threading issue switch to napi_schedule(). Fixes: 424a646e ("r8169: fix operation under forced interrupt threading") Link: https://www.spinics.net/lists/netdev/msg694960.htmlReported-by:
Serge Belyshev <belyshev@depni.sinp.msu.ru> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Tested-by:
-
Aleksandr Nogikh authored
Currently it is possible to craft a special netlink RTM_NEWQDISC command that can result in jitter being equal to 0x80000000. It is enough to set the 32 bit jitter to 0x02000000 (it will later be multiplied by 2^6) or just set the 64 bit jitter via TCA_NETEM_JITTER64. This causes an overflow during the generation of uniformly distributed numbers in tabledist(), which in turn leads to division by zero (sigma != 0, but sigma * 2 is 0). The related fragment of code needs 32-bit division - see commit 9b0ed89 ("netem: remove unnecessary 64 bit modulus"), so switching to 64 bit is not an option. Fix the issue by keeping the value of jitter within the range that can be adequately handled by tabledist() - [0;INT_MAX]. As negative std deviation makes no sense, take the absolute value of the passed value and cap it at INT_MAX. Inside tabledist(), switch to unsigned 32 bit arithmetic in order to prevent overflows. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Aleksandr Nogikh <nogikh@google.com> Reported-by: syzbot+ec762a6342ad0d3c0d8f@syzkaller.appspotmail.com Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20201028170731.1383332-1-aleksandrnogikh@gmail.comSigned-off-by:
-
Lijun Pan authored
Jakub Kicinski brought up a concern in ibmvnic_set_mac(). ibmvnic_set_mac() does this: ether_addr_copy(adapter->mac_addr, addr->sa_data); if (adapter->state != VNIC_PROBED) rc = __ibmvnic_set_mac(netdev, addr->sa_data); So if state == VNIC_PROBED, the user can assign an invalid address to adapter->mac_addr, and ibmvnic_set_mac() will still return 0. The fix is to validate ethernet address at the beginning of ibmvnic_set_mac(), and move the ether_addr_copy to the case of "adapter->state != VNIC_PROBED". Fixes: c26eba03 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by:
Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201027220456.71450-1-ljp@linux.ibm.comSigned-off-by:
-
Arnd Bergmann authored
There are no known users of this driver as of October 2020, and it will be removed unless someone turns out to still need it in future releases. According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there have been many public wimax networks, but it appears that many of these have migrated to LTE or discontinued their service altogether. As most PCs and phones lack WiMAX hardware support, the remaining networks tend to use standalone routers. These almost certainly run Linux, but not a modern kernel or the mainline wimax driver stack. NetworkManager appears to have dropped userspace support in 2015 https://bugzilla.gnome.org/show_bug.cgi?id=747846, the www.linuxwimax.org site had already shut down earlier. WiMax is apparently still being deployed on airport campus networks ("AeroMACS"), but in a frequency band that was not supported by the old Intel 2400m (used in Sandy Bridge laptops and earlier), which is the only driver using the kernel's wimax stack. Move all files into drivers/staging/wimax, including the uapi header files and documentation, to make it easier to remove it when it gets to that. Only minimal changes are made to the source files, in order to make it possible to port patches across the move. Also remove the MAINTAINERS entry that refers to a broken mailing list and website. Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-By:
Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Suggested-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
gcc -Wextra points out multiple fields that use the same index '1' in the wimax_gnl_policy definition: net/wimax/stack.c:393:29: warning: initialized field overwritten [-Woverride-init] net/wimax/stack.c:397:28: warning: initialized field overwritten [-Woverride-init] net/wimax/stack.c:398:26: warning: initialized field overwritten [-Woverride-init] This seems to work since all four use the same NLA_U32 value, but it still appears to be wrong. In addition, there is no intializer for WIMAX_GNL_MSG_PIPE_NAME, which uses the same index '2' as WIMAX_GNL_RFKILL_STATE. Johannes already changed this twice to improve it, but I don't think there is a good solution, so try to work around it by using a numeric index and adding comments. Fixes: 3b0f31f2 ("genetlink: make policy common to family") Fixes: b61a5eea ("wimax: use genl_register_family_with_ops()") Acked-by:
-
Paolo Abeni authored
When moving the skbs from the subflow into the msk receive queue, we must schedule there the required amount of memory. Try to borrow the required memory from the subflow, if needed, so that we leverage the existing TCP heuristic. Fixes: 6771bfd9 ("mptcp: update mptcp ack sequence from work queue") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/f6143a6193a083574f11b00dbf7b5ad151bc4ff4.1603810630.git.pabeni@redhat.comSigned-off-by:
-
