- 21 Jun, 2024 30 commits
-
-
Matthias Schiffer authored
qca8k_port_bridge_join() set QCA8K_PORT_LOOKUP_CTRL() for i == port twice, once in the loop handling all other port's masks, and finally at the end with the accumulated port_mask. The first time it would incorrectly set the port's own bit in the mask, only to correct the mistake a moment later. qca8k_port_bridge_leave() had the same issue, but here the regmap_clear_bits() was a no-op rather than setting an unintended value. Remove the duplicate assignment by skipping the whole loop iteration for i == port. The unintended bit setting doesn't seem to have any negative effects (even when not reverted right away), so the change is submitted as a simple cleanup rather than a fix. Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Herve Codina says: ==================== Handle switch reset in mscc-miim These two patches were previously sent as part of a bigger series: https://lore.kernel.org/lkml/20240527161450.326615-1-herve.codina@bootlin.com/ v1 and v2 iterations were handled during the v1 and v2 reviews of this bigger series. As theses two patches are now ready to be applied, they were extracted from the bigger series and sent alone in this current series. This current v3 series takes into account feedback received during the bigger series v2 review. Changes v2 -> v3 - patch 1 Drop one useless sentence. Add 'Reviewed-by: Andrew Lunn <andrew@lunn.ch>' Add 'Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>' - patch 2 Add 'Reviewed-by: Andrew Lunn <andrew@lunn.ch>' Changes v1 -> v2 (as part of the bigger series iterations) - Patch 1 Improve the reset property description - Patch 2 Fix a wrong reverse x-mass tree declaration ==================== Signed-off-by:
-
Herve Codina authored
The mscc-miim device can be impacted by the switch reset, at least when this device is part of the LAN966x PCI device. Handle this newly added (optional) resets property. Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Herve Codina authored
Add the (optional) resets property. The mscc-miim device is impacted by the switch reset especially when the mscc-miim device is used as part of the LAN966x PCI device. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
David S. Miller authored
James Chapman says: ==================== l2tp: don't use the tunnel socket's sk_user_data in datapath This series refactors l2tp to not use the tunnel socket's sk_user_data in the datapath. The main reasons for doing this are * to allow for simplifying internal socket cleanup code (to be done in a later series) * to support multiple L2TPv3 UDP tunnels using the same 5-tuple address When handling received UDP frames, l2tp's current approach is to look up a session in a per-tunnel list. l2tp uses the tunnel socket's sk_user_data to derive the tunnel context from the receiving socket. But this results in the socket and tunnel lifetimes being very tightly coupled and the tunnel/socket cleanup paths being complicated. The latter has historically been a source of l2tp bugs and makes the code more difficult to maintain. Also, if sockets are aliased, we can't trust that the socket's sk_user_data references the right tunnel anyway. Hence the desire to not use sk_user_data in the datapath. The new approach is to lookup sessions in a per-net session list without first deriving the tunnel: * For L2TPv2, the l2tp header has separate tunnel ID and session ID fields which can be trivially combined to make a unique 32-bit key for per-net session lookup. * For L2TPv3, there is no tunnel ID in the packet header, only a session ID, which should be unique over all tunnels so can be used as a key for per-net session lookup. However, this only works when the L2TPv3 session ID really is unique over all tunnels. At least one L2TPv3 application is known to use the same session ID in different L2TPv3 UDP tunnels, relying on UDP address/ports to distinguish them. This worked previously because sessions in UDP tunnels were kept in a per-tunnel list. To retain support for this, L2TPv3 session ID collisions are managed using a separate per-net session hlist, keyed by ID and sk. When looking up a session by ID, if there's more than one match, sk is used to find the right one. L2TPv3 sessions in IP-encap tunnels are already looked up by session ID in a per-net list. This work has UDP sessions also use the per-net session list, while allowing for session ID collisions. The existing per-tunnel hlist becomes a plain list since it is used only in management and cleanup paths to walk a list of sessions in a given tunnel. For better performance, the per-net session lists use IDR. Separate IDRs are used for L2TPv2 and L2TPv3 sessions to avoid potential key collisions. These changes pass l2tp regression tests and improve data forwarding performance by about 10% in some of my test setups. ==================== Signed-off-by: -
James Chapman authored
The per-tunnel session list is no longer used by the datapath. However, we still need a list of sessions in the tunnel for l2tp_session_get_nth, which is used by management code. (An alternative might be to walk each session IDR list, matching only sessions of a given tunnel.) Replace the per-tunnel hlist with a per-tunnel list. In functions which walk a list of sessions of a tunnel, walk this list instead. Signed-off-by:
James Chapman <jchapman@katalix.com> Reviewed-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
-
James Chapman authored
All users of l2tp_tunnel_get_session are now gone so it can be removed. Signed-off-by:
-
James Chapman authored
Add generic session getter which uses IDR. Replace all users of l2tp_tunnel_get_session which uses the per-tunnel session list to use the generic getter. Signed-off-by:
-
James Chapman authored
If UDP sockets are aliased, sk might be the wrong socket. There's no benefit to using sk_user_data to do some checks on the associated tunnel context. Just report the error anyway, like udp core does. Signed-off-by:
-
James Chapman authored
Modify UDP decap to not use the tunnel pointer which comes from the sock's sk_user_data when parsing the L2TP header. By looking up the destination session using only the packet contents we avoid potential UDP 5-tuple aliasing issues which arise from depending on the socket that received the packet. Drop the useless error messages on short packet or on failing to find a session since the tunnel pointer might point to a different tunnel if multiple sockets use the same 5-tuple. Short packets (those not big enough to contain an L2TP header) are no longer counted in the tunnel's invalid counter because we can't derive the tunnel until we parse the l2tp header to lookup the session. l2tp_udp_encap_recv was a small wrapper around l2tp_udp_recv_core which used sk_user_data to derive a tunnel pointer in an RCU-safe way. But we no longer need the tunnel pointer, so remove that code and combine the two functions. Signed-off-by:
-
James Chapman authored
L2TPv2 sessions are currently kept in a per-tunnel hashlist, keyed by 16-bit session_id. When handling received L2TPv2 packets, we need to first derive the tunnel using the 16-bit tunnel_id or sock, then lookup the session in a per-tunnel hlist using the 16-bit session_id. We want to avoid using sk_user_data in the datapath and double lookups on every packet. So instead, use a per-net IDR to hold L2TPv2 sessions, keyed by a 32-bit value derived from the 16-bit tunnel_id and session_id. This will allow the L2TPv2 UDP receive datapath to lookup a session with a single lookup without deriving the tunnel first. L2TPv2 sessions are held in their own IDR to avoid potential key collisions with L2TPv3 sessions. Signed-off-by:
-
James Chapman authored
L2TPv3 sessions are currently held in one of two fixed-size hash lists: either a per-net hashlist (IP-encap), or a per-tunnel hashlist (UDP-encap), keyed by the L2TPv3 32-bit session_id. In order to lookup L2TPv3 sessions in UDP-encap tunnels efficiently without finding the tunnel first via sk_user_data, UDP sessions are now kept in a per-net session list, keyed by session ID. Convert the existing per-net hashlist to use an IDR for better performance when there are many sessions and have L2TPv3 UDP sessions use the same IDR. Although the L2TPv3 RFC states that the session ID alone identifies the session, our implementation has allowed the same session ID to be used in different L2TP UDP tunnels. To retain support for this, a new per-net session hashtable is used, keyed by the sock and session ID. If on creating a new session, a session already exists with that ID in the IDR, the colliding sessions are added to the new hashtable and the existing IDR entry is flagged. When looking up sessions, the approach is to first check the IDR and if no unflagged match is found, check the new hashtable. The sock is made available to session getters where session ID collisions are to be considered. In this way, the new hashtable is used only for session ID collisions so can be kept small. For managing session removal, we need a list of colliding sessions matching a given ID in order to update or remove the IDR entry of the ID. This is necessary to detect session ID collisions when future sessions are created. The list head is allocated on first collision of a given ID and refcounted. Signed-off-by:
-
James Chapman authored
Remove an unused variable in struct l2tp_tunnel which was left behind by commit c4d48a58 ("l2tp: convert l2tp_tunnel_list to idr"). Signed-off-by:
-
Sai Krishna authored
The existing method of reserving unicast filter count leads to wasted MCAM entries if the functionality is not used or fewer entries are used. Furthermore, the amount of MCAM entries differs amongst Octeon SoCs. We implemented a means to adjust the UC filter count via devlink, allowing for better use of MCAM entries across Netdev apps. commands: To get the current unicast filter count # devlink dev param show pci/0002:02:00.0 name unicast_filter_count To change/set the unicast filter count # devlink dev param set pci/0002:02:00.0 name unicast_filter_count value 5 cmode runtime Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
New drivers were prevented from adding ndo_set_vf_* callbacks over the last few years. This was expected to result in broader switchdev adoption, but seems to have had little effect. Based on recent netdev meeting there is broad support for allowing adding those ops. There is a problem with the current API supporting a limited number of VFs (100+, which is less than some modern HW supports). We can try to solve it by adding similar functionality on devlink ports, but that'd be another API variation to maintain. So a netlink attribute reshuffling is a more likely outcome. Document the guidance, make it clear that the API is frozen. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Lukasz Majewski authored
The KSZ9477 allows HSR in-HW offloading for any of two selected ports. This patch adds check if one tries to use more than two ports with HSR offloading enabled. The problem is with RedBox configuration (HSR-SAN) - when configuring: ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 interlink lan3 \ supervision 45 version 1 The lan1 (port0) and lan2 (port1) are correctly configured as ports, which can use HSR offloading on ksz9477. However, when we do already have two bits set in hsr_ports, we need to return (-ENOTSUPP), so the interlink port (lan3) would be used with SW based HSR RedBox support. Otherwise, I do see some strange network behavior, as some HSR frames are visible on non-HSR network and vice versa. This causes the switch connected to interlink port (lan3) to drop frames and no communication is possible. Moreover, conceptually - the interlink (i.e. HSR-SAN port - lan3/port2) shall be only supported in software as it is also possible to use ksz9477 with only SW based HSR (i.e. port0/1 -> hsr0 with offloading, port2 -> HSR-SAN/interlink, port4/5 -> hsr1 with SW based HSR). Fixes: 5055cccf ("net: hsr: Provide RedBox support (HSR-SAN)") Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Csókás, Bence authored
FEC_ECR_EN1588 bit gets cleared after MAC reset in `fec_stop()`, which makes all 1588 functionality shut down, and all the extended registers disappear, on link-down, making the adapter fall back to compatibility "dumb mode". However, some functionality needs to be retained (e.g. PPS) even without link. Fixes: 6605b730 ("FEC: Add time stamping code and a PTP hardware clock") Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by:
Wei Fang <wei.fang@nxp.com> Signed-off-by:
-
David S. Miller authored
David Wei says: ==================== bnxt_en: implement netdev_queue_mgmt_ops Implement netdev_queue_mgmt_ops for bnxt added in [1]. This will be used in the io_uring ZC Rx patchset to configure queues with a custom page pool w/ a special memory provider for zero copy support. The first two patches prep the driver, while the final patch adds the implementation. Any arbitrary Rx queue can be reset without affecting other queues. V2 and prior of this patchset was thought to only support resetting queues not in the main RSS context. Upon further testing I realised moving queues out and calling bnxt_hwrm_vnic_update() wasn't necessary. I didn't include the netdev core API using this netdev_queue_mgmt_ops because Mina is adding it in his devmem TCP series [2]. But I'm happy to include it if folks want to include a user with this series. I tested this series on BCM957504-N1100FY4 with FW 229.1.123.0. I manually injected failures at all the places that can return an errno and confirmed that the device/queue is never left in a broken state. [1]: https://lore.kernel.org/netdev/20240501232549.1327174-2-shailend@google.com/ [2]: https://lore.kernel.org/netdev/20240607005127.3078656-2-almasrymina@google.com/ v3: - tested w/o bnxt_hwrm_vnic_update() and it works on any queue - removed unneeded code v2: - fix broken build - remove unused var in bnxt_init_one_rx_ring() ==================== Signed-off-by:
-
David Wei authored
Implement netdev_queue_mgmt_ops for bnxt added in [1]. Two bnxt_rx_ring_info structs are allocated to hold the new/old queue memory. Queue memory is copied from/to the main bp->rx_ring[idx] bnxt_rx_ring_info. Queue memory is pre-allocated in bnxt_queue_mem_alloc() into a clone, and then copied into bp->rx_ring[idx] in bnxt_queue_mem_start(). Similarly, when bp->rx_ring[idx] is stopped its queue memory is copied into a clone, and then freed later in bnxt_queue_mem_free(). I tested this patchset with netdev_rx_queue_restart(), including inducing errors in all places that returns an error code. In all cases, the queue is left in a good working state. Rx queues are created/destroyed using bnxt_hwrm_rx_ring_alloc() and bnxt_hwrm_rx_ring_free(), which issue HWRM_RING_ALLOC and HWRM_RING_FREE commands respectively to the firmware. By the time a HWRM_RING_FREE response is received, there won't be any more completions from that queue. Thanks to Somnath for helping me with this patch. With their permission I've added them as Acked-by. [1]: https://lore.kernel.org/netdev/20240501232549.1327174-2-shailend@google.com/Acked-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
David Wei <dw@davidwei.uk> Reviewed-by:
-
David Wei authored
To prepare for queue API implementation, split rx ring functions out from ring helpers. These new helpers will be called from queue API implementation. Signed-off-by:
-
David S. Miller authored
Johan Jonker says: ==================== cleanup arc emac The Rockchip emac binding for rk3036/rk3066/rk3188 has been converted to YAML with the ethernet-phy node in a mdio node. This requires some driver fixes by someone that can do hardware testing. In order to make a future fix easier make the driver 'Rockchip only' by removing the obsolete part of the arc emac driver. ==================== Signed-off-by: -
Johan Jonker authored
The last real user nSIM_700 of the "snps,arc-emac" compatible string in a driver was removed in 2019. The use of this string in the combined DT of rk3066a/rk3188 as place holder has also been replaced, so remove arc_emac.txt Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Johan Jonker authored
The last real user nSIM_700 of the "snps,arc-emac" compatible string in a driver was removed in 2019. The use of this string in the combined DT of rk3066a/rk3188 as place holder has also been replaced, so remove emac_arc.c to clean up some code. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Johan Jonker authored
In the combined DT of rk3066a/rk3188 the emac node uses as place holder the compatible string "snps,arc-emac". The last real user nSIM_700 of the "snps,arc-emac" compatible string in a driver was removed in 2019. Rockchip emac nodes don't make use of this common fall back string. In order to removed unused driver code replace this string with "rockchip,rk3066-emac". As we are there remove the blank lines and sort. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Jakub Kicinski authored
Frank Li says: ==================== dt-bindings: net: Convert fsl,fman related file to yaml format Passed dt_binding_check Run dt_binding_check: fsl,fman-mdio.yaml SCHEMA Documentation/devicetree/bindings/processed-schema.json CHKDT Documentation/devicetree/bindings LINT Documentation/devicetree/bindings DTEX Documentation/devicetree/bindings/net/fsl,fman-mdio.example.dts DTC_CHK Documentation/devicetree/bindings/net/fsl,fman-mdio.example.dtb Run dt_binding_check: fsl,fman-muram.yaml SCHEMA Documentation/devicetree/bindings/processed-schema.json CHKDT Documentation/devicetree/bindings LINT Documentation/devicetree/bindings DTEX Documentation/devicetree/bindings/net/fsl,fman-muram.example.dts DTC_CHK Documentation/devicetree/bindings/net/fsl,fman-muram.example.dtb Run dt_binding_check: fsl,fman-port.yaml SCHEMA Documentation/devicetree/bindings/processed-schema.json CHKDT Documentation/devicetree/bindings LINT Documentation/devicetree/bindings DTEX Documentation/devicetree/bindings/net/fsl,fman-port.example.dts DTC_CHK Documentation/devicetree/bindings/net/fsl,fman-port.example.dtb Run dt_binding_check: fsl,fman.yaml SCHEMA Documentation/devicetree/bindings/processed-schema.json CHKDT Documentation/devicetree/bindings LINT Documentation/devicetree/bindings DTEX Documentation/devicetree/bindings/net/fsl,fman.example.dts DTC_CHK Documentation/devicetree/bindings/net/fsl,fman.example.dtb Run dt_binding_check: ptp-qoriq.yaml SCHEMA Documentation/devicetree/bindings/processed-schema.json CHKDT Documentation/devicetree/bindings LINT Documentation/devicetree/bindings DTEX Documentation/devicetree/bindings/ptp/ptp-qoriq.example.dts DTC_CHK Documentation/devicetree/bindings/ptp/ptp-qoriq.example.dtb v1: https://lore.kernel.org/r/20240614-ls_fman-v1-0-cb33c96dc799@nxp.com ==================== Link: https://patch.msgid.link/20240618-ls_fman-v2-0-f00a82623d8e@nxp.comSigned-off-by:
-
Frank Li authored
Convert fsl-fman from txt to yaml format and split it fsl,fman.yam, fsl,fman-port.yaml, fsl-muram.yaml, fsl-mdio.yaml. Addition changes: fsl,fman.yaml: - Fixed interrupts in example. - Fixed ethernet@e8000 miss } in example. - ptp-timer add label in example. - Ref to new fsl,fman*.yaml. - Reorder property in example. - Keep only one example. - Add const for #address-cells and #size-cells. - Use defined interrupt type. - ptp example use node name phc. fsl,fman-port: - Keep only one example. fsl,fman-mdio: - Add little-endian property. - Add ref to mdio.yaml. - Remove suppress-preamble. - Add #address-cells and #size-cells in example. - Remove clock-frequency, which already describe in mmio.yaml. fsl,muram.yaml: - Add reg property. - Remove range property. - Use reg instead of range in example. Signed-off-by:
Frank Li <Frank.Li@nxp.com> Reviewed-by:
-
Frank Li authored
Convert ptp-qoirq from txt to yaml format. Additional change: - Fixed example interrupts proptery. Need only 1 irq by check MPC8313 spec. - Move Reference clock context under clk,sel. - Interrupts is not required property. - Use low case for hex value. - Check reference manual of MPC8313, p1010 and so on, which dts use more than 1 irqs. Only 1 irq for each ptp device. Check driver code (drivers/ptp/ptp_qoriq.c) and only 1 irq used. So original description is wrong. - Remove comments for compatible string. Signed-off-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct mt76_dev by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev_dummy() to allocate the net_device object at mt76_dma_init(). The free of the device occurs at mt76_dma_cleanup(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Reviewed-by:
Breno Leitao <leitao@debian.org> Acked-by:
Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240619105311.3144908-1-leitao@debian.orgSigned-off-by:
-
Bartosz Golaszewski authored
These functions are only used within the compilation unit they're defined in so there's no reason to export them. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by:
-
Uwe Kleine-König authored
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by:
-
- 20 Jun, 2024 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e796211 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f8769 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bpf and netfilter. Happy summer solstice! The line count is a bit inflated by a selftest and update to a driver's FW interface header, in reality this is slightly below average for us. We are expecting one driver fix from Intel, but there are no big known issues. Current release - regressions: - ipv6: bring NLM_DONE out to a separate recv() again Current release - new code bugs: - wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API Previous releases - regressions: - wifi: mac80211: fix monitor channel setting with chanctx emulation (probably most awaited of the fixes in this PR, tracked by Thorsten) - usb: ax88179_178a: bring back reset on init, if PHY is disconnected - bpf: fix UML x86_64 compile failure with BPF - bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit with malicious BPF - eth: mvpp2: use slab_build_skb() for packets in slab, driver was missed during API refactoring - wifi: iwlwifi: add missing unlock of mvm mutex Previous releases - always broken: - ipv6: add a number of missing null-checks for in6_dev_get(), in case IPv6 disabling races with the datapath - bpf: fix reg_set_min_max corruption of fake_reg - sched: act_ct: add netns as part of the key of tcf_ct_flow_table" * tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits) net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings selftests: virtio_net: add forgotten config options bnxt_en: Restore PTP tx_avail count in case of skb_pad() error bnxt_en: Set TSO max segs on devices with limits bnxt_en: Update firmware interface to 1.10.3.44 net: stmmac: Assign configured channel value to EXTTS event net: do not leave a dangling sk pointer, when socket creation fails net/tcp_ao: Don't leak ao_info on error-path ice: Fix VSI list rule with ICE_SW_LKUP_LAST type ipv6: bring NLM_DONE out to a separate recv() again selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() selftests: openvswitch: Set value to nla flags. octeontx2-pf: Fix linking objects into multiple modules octeontx2-pf: Add error handling to VLAN unoffload handling virtio_net: fixing XDP for fully checksummed packets handling virtio_net: checksum offloading handling fix ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Lots of small HD-audio quirks and fixes (mostly Realtek codec and Cirrus stuff). Also a small MIDI 2.0 fix and a fix for missing module description are included" * tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE ALSA: hda/realtek: Add more codec ID to no shutup pins list sound/oss/dmasound: add missing MODULE_DESCRIPTION() macro ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8 ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM ALSA: hda: tas2781: Component should be unbound before deconstruction ALSA: hda: cs35l41: Component should be unbound before deconstruction ALSA: hda: cs35l56: Component should be unbound before deconstruction ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda/realtek: Remove Framework Laptop 16 from quirks ALSA: hda/realtek: Limit mic boost on N14AP7 ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11. ALSA: seq: ump: Fix missing System Reset message handling ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() ALSA: hda: cs35l56: Fix lifecycle of codec pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull mfd fix from Lee Jones: - Fix AXP717 PMIC probe and by extension its consumers * tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: axp20x: AXP717: Fix missing IRQ status registers range
-
Oliver Neukum authored
This functions retrieves values by passing a pointer. As the function that retrieves them can fail before touching the pointers, the variables must be initialized. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.comSigned-off-by:
-
Jiri Pirko authored
One may use tools/testing/selftests/drivers/net/virtio_net/config for example for vng build command like this one: $ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config In that case, the needed kernel config options are not turned on. Add the missed kernel config options. Reported-by:
Matthieu Baerts <matttbe@kernel.org> Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/ Fixes: ccfaed04 ("selftests: virtio_net: add initial tests") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240619061748.1869404-1-jiri@resnulli.usSigned-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes for net The first firmware interface update is needed by the second patch to limit the number of TSO segments on the 5760X chips. The third patch fixes the TX error path for PTP packets. ==================== Link: https://lore.kernel.org/r/20240618215313.29631-1-michael.chan@broadcom.comSigned-off-by:
-
Pavan Chebbi authored
The current code only restores PTP tx_avail count when we get DMA mapping errors. Fix it so that the PTP tx_avail count will be restored for both DMA mapping errors and skb_pad() errors. Otherwise PTP TX timestamp will not be available after a PTP packet hits the skb_pad() error. Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Michael Chan authored
Firmware will now advertise a non-zero TSO max segments if the device has a limit. 0 means no limit. The latest 5760X chip (early revs) has a limit of 2047 that cannot be exceeded. If exceeded, the chip will send out just a small number of segments. Call netif_set_tso_max_segs() if the device has a limit. Fixes: 2012a6ab ("bnxt_en: Add 5760X (P7) PCI IDs") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by:
-
Michael Chan authored
The relevant change is the max_tso_segs value returned by firmware in the HWRM_FUNC_QCAPS response. This value will be used in the next patch to cap the TSO segments. Signed-off-by:
-
