PMIC pm8150l is a slave pmic and this adds base DTS file for pm8150l
with power-on, adc and gpio nodes
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

PMIC pm8150b is a slave pmic and this adds base DTS file for pm8150b
with power-on, adc, and gpio nodes
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add base DTS file for pm8150 along with GPIOs, power-on, rtc and vadc
nodes
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This add base DTS file with cpu, psci, firmware, clock node tlmm and
spmi and enables boot to console
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add fastrpc compute context bank nodes to both cdsp and adsp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add dynamic power coefficients for the Silver and Gold CPU cores of
the Qualcomm SDM845.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Update the reserved-memory map to version 3, to adjust to changes in the
remoteprocs.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

'7d0c76bd ("clk: qcom: Add WCSS gcc clock control for QCS404")'
introduces two new clocks to gcc. These are not used before
clk_disable_unused() and as such the clock framework tries to disable
them.

But on the EVB these registers are only accessible through TrustZone, so
these clocks must be marked as "protected" to prevent the clock code
from touching them.

Numerical values are used as the constants are not yet available in a
common tree.
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Longcheer L8150 is a smartphone based on MSM8916 which is
used in several rebrands like the Snapdragon 410
Android One devices or the Wileyfox Swift.

Add a device tree for L8150 with initial support for:
  - SDHCI (internal and external storage)
  - USB Device Mode
  - UART
  - Regulators
Co-developed-by: Nikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Samsung Galaxy A3 (SM-A300FU) and Samsung Galaxy A5 (SM-A500FU)
are smartphones using the MSM8916 SoC released in 2015.

Add a device tree for A3U and A5U with initial support for:
  - SDHCI (internal and external storage)
  - USB Device Mode
  - UART (on USB connector via the SM5502 MUIC)
  - Regulators

The two devices (and all other variants of A3/A5 released in 2015)
are very similar, with some differences in display, touchscreen
and sensors. The common parts are shared in
msm8916-samsung-a2015-common.dtsi to reduce duplication.

The device tree is loosely based on apq8016-sbc.dtsi and the
downstream kernel provided by Samsung, mixed with a lot of own
research.
Co-developed-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Document the new samsung,a3u/a5u-eur and longcheer,l8150
device tree bindings used in their device trees.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the "longcheer" vendor prefix for Longcheer Technology Co., Ltd.,
an "industry-leading service provider of mobile phone design
and product delivery". (http://www.longcheer.com)
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This adds Qualcomm Venus video codec DT node for the video
codec hardware found in MSM8996 platforms.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

AOSS hosts resources that can be used to warm up the SoC.
Add nodes for these resources.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable coresight support by adding device nodes for the
available source, sinks and channel blocks on msm8996.

This also adds coresight cpu debug nodes.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable coresight support by adding device nodes for the
available source, sinks and channel blocks on MSM8998.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add coresight components found on Qualcomm SDM845 SoC.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

DT nodes should be ordered by address, then node name, and finally label.
The msm8998 dtsi does not follow this, so clean it up by reordering the
nodes.  While we are at it, extend the addresses to be fully 32-bits wide
so that ordering is easy to determine when adding new nodes.  Also, two
or so nodes had the wrong address value in their node name (did not match
the reg property), so fix those up as well.

Hopefully going forward, things can be maintained so that a cleanup like
this is not needed.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add wifi regulators in qcs404 dt node for proxy vote. Proxy votes are
required for handling driver recovery scenarios to prevent
un-clocked register access during driver recovery.
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The thermal trip points have unit name but no reg property, so we can
remove them

arch/arm64/boot/dts/qcom/qcs404.dtsi:1080.31-1084.7: Warning (unit_address_vs_reg): /thermal-zones/aoss-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1095.33-1099.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1110.32-1114.7: Warning (unit_address_vs_reg): /thermal-zones/lpass-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1125.31-1129.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1140.34-1144.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1145.34-1149.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1174.31-1178.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1179.31-1183.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1208.31-1212.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1213.31-1217.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1242.31-1246.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1247.31-1251.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1276.31-1280.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1281.31-1285.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1310.30-1314.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal/trips/trip-point@0: node has a unit name, but no reg property
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

pms405@1 nodes specified unnecessary #address-cells/#size-cells but the
subnodes dont have "ranges" or "reg" so remove it

arch/arm64/boot/dts/qcom/pms405.dtsi:141.21-150.4: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@200f000/pms405@1: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The adc nodes have reg property but were missing the unit name, so add
that to fix these warnings:

arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Last level cache (aka. system cache) controller provides control
over the last level cache present on SDM845. This cache lies after
the memory noc, right before the DDR.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Node names shouldn't include a vendor prefix and should whenever
possible use a generic identifier. Resolve this by renaming the smmu
nodes "iommu".
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Unit name is supposed to be a number, using a macro with hex value is
not recommended, so add the value in unit name.

arch/arm64/boot/dts/qcom/pm8998.dtsi:81.18-84.6: Warning (unit_address_format): /soc/spmi@c440000/pmic@0/adc@3100/adc-chan@0x06: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/pm8998.dtsi:81.18-84.6: Warning (unit_address_format): /soc/spmi@c440000/pmic@0/adc@3100/adc-chan@0x06: unit name should not have leading 0s
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Unit address is supposed to be a number, using a macro with hex value is
not recommended, so add the value in unit name.

arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:966.16-969.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4d: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:971.16-974.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4e: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:976.16-979.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4f: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:981.16-984.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x50: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:986.16-989.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x51: unit name should not have leading "0x"
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The thermal trip points have unit name but no reg property, so we can
remove them

arch/arm64/boot/dts/qcom/sdm845.dtsi:2824.31-2828.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2830.31-2834.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2868.31-2872.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2874.31-2878.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2912.31-2916.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2918.31-2922.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2956.31-2960.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2962.31-2966.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3000.31-3004.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3006.31-3010.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3044.31-3048.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3050.31-3054.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3088.31-3092.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3094.31-3098.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3132.31-3136.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3138.31-3142.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3176.32-3180.7: Warning (unit_address_vs_reg): /thermal-zones/aoss0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3191.35-3195.7: Warning (unit_address_vs_reg): /thermal-zones/cluster0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3211.35-3215.7: Warning (unit_address_vs_reg): /thermal-zones/cluster1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3231.31-3235.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-top/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3246.31-3250.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-bottom/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3261.32-3265.7: Warning (unit_address_vs_reg): /thermal-zones/aoss1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3276.35-3280.7: Warning (unit_address_vs_reg): /thermal-zones/q6-modem-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3291.30-3295.7: Warning (unit_address_vs_reg): /thermal-zones/mem-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3306.31-3310.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3321.33-3325.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3336.33-3340.7: Warning (unit_address_vs_reg): /thermal-zones/camera-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3351.32-3355.7: Warning (unit_address_vs_reg): /thermal-zones/video-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3366.32-3370.7: Warning (unit_address_vs_reg): /thermal-zones/modem-thermal/trips/trip-point@0: node has a unit name, but no reg property
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We get a warning about unnecessary properties of

arch/arm64/boot/dts/qcom/sdm845.dtsi:2211.22-2257.6: Warning (avoid_unnecessary_addr_size): /soc/mdss@ae00000/dsi@ae94000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2278.22-2324.6: Warning (avoid_unnecessary_addr_size): /soc/mdss@ae00000/dsi@ae96000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

So, remove these properties
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We get a warning about missing unit name for soc node, so add it.

arch/arm64/boot/dts/qcom/sdm845.dtsi:623.11-2814.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This adds video nodes to sdm845 based on the examples
in the bindings.
Tested-by: An\355bal Lim\363n <anibal.limon@linaro.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Malathi Gottam <mgottam@codeaurora.org>
Co-developed-by: Aniket Masule <amasule@codeaurora.org>
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This adds the initial DT for the Asus NovaGo TP370QL laptop.  Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This adds the initial DT for the HP Envy x2 laptop.  Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This adds the initial DT for the Lenovo Miix 630 laptop.  Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Pull Devicetree fixes from Rob Herring:
 "Fix several warnings/errors in validation of binding schemas"

* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
  dt-bindings: iio: ad7124: Fix dtc warnings in example
  dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
  dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
  dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
  dt-bindings: Ensure child nodes are of type 'object'

Pull vfs documentation typo fix from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix: it's d_make_root, not d_make_inode...

Pull cifs fixes from Steve French:
 "Two fixes for stable, one that had dependency on earlier patch in this
  merge window and can now go in, and a perf improvement in SMB3 open"

* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: flush before set-info if we have writeable handles
  smb3: optimize open to not send query file internal info
  cifs: copy_file_range needs to strip setuid bits and update timestamps
  CIFS: fix deadlock in cached root handling

The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.

   kernel BUG at drivers/iommu/iova.c:801!
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
    Call Trace:
     free_cpu_cached_iovas+0xbd/0x150
     alloc_iova_fast+0x8c/0xba
     dma_ops_alloc_iova.isra.6+0x65/0xa0
     map_sg+0x8c/0x2a0
     scsi_dma_map+0xc6/0x160
     pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
     pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
     scsi_queue_rq+0x79c/0x1200
     blk_mq_dispatch_rq_list+0x4dc/0xb70
     blk_mq_sched_dispatch_requests+0x249/0x310
     __blk_mq_run_hw_queue+0x128/0x200
     blk_mq_run_work_fn+0x27/0x30
     process_one_work+0x522/0xa10
     worker_thread+0x63/0x5b0
     kthread+0x1d2/0x1f0
     ret_from_fork+0x22/0x40

Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>