Pull msack updates from Casey Schaufler:
 "Two minor code clean-ups for Smack.

  One removes a touch of dead code and the other replaces an instance of
  kzalloc + strncpy with kstrndup"

* tag 'Smack-for-6.0' of https://github.com/cschaufler/smack-next:
  smack: Remove the redundant lsm_inode_alloc
  smack: Replace kzalloc + strncpy with kstrndup

Pull LSM update from Paul Moore:
 "A maintainer change for the LSM layer: James has asked me to take over
  the day-to-day responsibilities so a single patch to update the
  MAINTAINER info"

* tag 'lsm-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  MAINTAINERS: update the LSM maintainer info

Pull audit updates from Paul Moore:
 "Two minor audit patches: on marks a function as static, the other
  removes a redundant length check"

* tag 'audit-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: make is_audit_feature_set() static
  audit: remove redundant data_len check

Pull selinux updates from Paul Moore:
 "A relatively small set of patches for SELinux this time, eight patches
  in total with really only one significant change.

  The highlights are:

   - Add support for proper labeling of memfd_secret anonymous inodes.

     This will allow LSMs that implement the anonymous inode hooks to
     apply security policy to memfd_secret() fds.

   - Various small improvements to memory management: fixed leaks, freed
     memory when needed, boundary checks.

   - Hardened the selinux_audit_data struct with __randomize_layout.

   - A minor documentation tweak to fix a formatting/style issue"

* tag 'selinux-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: selinux_add_opt() callers free memory
  selinux: Add boundary check in put_entry()
  selinux: fix memleak in security_read_state_kernel()
  docs: selinux: add '=' signs to kernel boot options
  mm: create security context for memfd_secret inodes
  selinux: fix typos in comments
  selinux: drop unnecessary NULL check
  selinux: add __randomize_layout to selinux_audit_data

Pull hardening updates from Kees Cook:

 - Fix Sparse warnings with randomizd kstack (GONG, Ruiqi)

 - Replace uintptr_t with unsigned long in usercopy (Jason A. Donenfeld)

 - Fix Clang -Wforward warning in LKDTM (Justin Stitt)

 - Fix comment to correctly refer to STRICT_DEVMEM (Lukas Bulwahn)

 - Introduce dm-verity binding logic to LoadPin LSM (Matthias Kaehlcke)

 - Clean up warnings and overflow and KASAN tests (Kees Cook)

* tag 'hardening-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  dm: verity-loadpin: Drop use of dm_table_get_num_targets()
  kasan: test: Silence GCC 12 warnings
  drivers: lkdtm: fix clang -Wformat warning
  x86: mm: refer to the intended config STRICT_DEVMEM in a comment
  dm: verity-loadpin: Use CONFIG_SECURITY_LOADPIN_VERITY for conditional compilation
  LoadPin: Enable loading from trusted dm-verity devices
  dm: Add verity helpers for LoadPin
  stack: Declare {randomize_,}kstack_offset to fix Sparse warnings
  lib: overflow: Do not define 64-bit tests on 32-bit
  MAINTAINERS: Add a general "kernel hardening" section
  usercopy: use unsigned long instead of uintptr_t

Pull execve updates from Kees Cook:

 - Allow unsharing time namespace on vfork+exec (Andrei Vagin)

 - Replace usage of deprecated kmap APIs (Fabio M. De Francesco)

 - Fix spelling mistake (Zhang Jiaming)

* tag 'execve-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  exec: Call kmap_local_page() in copy_string_kernel()
  exec: Fix a spelling mistake
  selftests/timens: add a test for vfork+exit
  fs/exec: allow to unshare a time namespace on vfork+exec

Pull seccomp update from Kees Cook:

 - Fix Clang build warning (YiFei Zhu)

* tag 'seccomp-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Fix compile warning when CC=clang

Pull pstore updates from Kees Cook:

 - Migrate to modern acomp crypto interface (Ard Biesheuvel)

 - Use better return type for "rcnt" (Dan Carpenter)

* tag 'pstore-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/zone: cleanup "rcnt" type
  pstore: migrate to crypto acomp interface

Merge tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Refactor DM core's mempool allocation so that it clearer by not being
   split acorss files.

 - Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.

 - Optimize DM core's more common bio splitting by eliminating the use
   of bio cloning with bio_split+bio_chain. Shift that cloning cost to
   the relatively unlikely dm_io requeue case that only occurs during
   error handling. Introduces dm_io_rewind() that will clone a bio that
   reflects the subset of the original bio that must be requeued.

 - Remove DM core's dm_table_get_num_targets() wrapper and audit all
   dm_table_get_target() callers.

 - Fix potential for OOM with DM writecache target by setting a default
   MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
   whichever is smaller).

 - Fix DM writecache target's stats that are reported through
   DM-specific table info.

 - Fix use-after-free crash in dm_sm_register_threshold_callback().

 - Refine DM core's Persistent Reservation handling in preparation for
   broader work Mike Christie is doing to add compatibility with
   Microsoft Windows Failover Cluster.

 - Fix various KASAN reported bugs in the DM raid target.

 - Fix DM raid target crash due to md_handle_request() bio splitting
   that recurses to block core without properly initializing the bio's
   bi_dev.

 - Fix some code comment typos and fix some Documentation formatting.

* tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
  dm: fix dm-raid crash if md_handle_request() splits bio
  dm raid: fix address sanitizer warning in raid_resume
  dm raid: fix address sanitizer warning in raid_status
  dm: Start pr_preempt from the same starting path
  dm: Fix PR release handling for non All Registrants
  dm: Start pr_reserve from the same starting path
  dm: Allow dm_call_pr to be used for path searches
  dm: return early from dm_pr_call() if DM device is suspended
  dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
  dm writecache: count number of blocks discarded, not number of discard bios
  dm writecache: count number of blocks written, not number of write bios
  dm writecache: count number of blocks read, not number of read bios
  dm writecache: return void from functions
  dm kcopyd: use __GFP_HIGHMEM when allocating pages
  dm writecache: set a default MAX_WRITEBACK_JOBS
  Documentation: dm writecache: Render status list as list
  Documentation: dm writecache: add blank line before optional parameters
  dm snapshot: fix typo in snapshot_map() comment
  dm raid: remove redundant "the" in parse_raid_params() comment
  dm cache: fix typo in 2 comment blocks
  ...

Pull block updates from Jens Axboe:

 - Improve the type checking of request flags (Bart)

 - Ensure queue mapping for a single queues always picks the right queue
   (Bart)

 - Sanitize the io priority handling (Jan)

 - rq-qos race fix (Jinke)

 - Reserved tags handling improvements (John)

 - Separate memory alignment from file/disk offset aligment for O_DIRECT
   (Keith)

 - Add new ublk driver, userspace block driver using io_uring for
   communication with the userspace backend (Ming)

 - Use try_cmpxchg() to cleanup the code in various spots (Uros)

 - Finally remove bdevname() (Christoph)

 - Clean up the zoned device handling (Christoph)

 - Clean up independent access range support (Christoph)

 - Clean up and improve block sysfs handling (Christoph)

 - Clean up and improve teardown of block devices.

   This turns the usual two step process into something that is simpler
   to implement and handle in block drivers (Christoph)

 - Clean up chunk size handling (Christoph)

 - Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
   Ming, Sebastian, Yang, Ying)

* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
  ublk_drv: fix double shift bug
  ublk_drv: make sure that correct flags(features) returned to userspace
  ublk_drv: fix error handling of ublk_add_dev
  ublk_drv: fix lockdep warning
  block: remove __blk_get_queue
  block: call blk_mq_exit_queue from disk_release for never added disks
  blk-mq: fix error handling in __blk_mq_alloc_disk
  ublk: defer disk allocation
  ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
  ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
  ublk: cleanup ublk_ctrl_uring_cmd
  ublk: simplify ublk_ch_open and ublk_ch_release
  ublk: remove the empty open and release block device operations
  ublk: remove UBLK_IO_F_PREFLUSH
  ublk: add a MAINTAINERS entry
  block: don't allow the same type rq_qos add more than once
  mmc: fix disk/queue leak in case of adding disk failure
  ublk_drv: fix an IS_ERR() vs NULL check
  ublk: remove UBLK_IO_F_INTEGRITY
  ublk_drv: remove unneeded semicolon
  ...

Pull io_uring zerocopy support from Jens Axboe:
 "This adds support for efficient support for zerocopy sends through
  io_uring. Both ipv4 and ipv6 is supported, as well as both TCP and
  UDP.

  The core network changes to support this is in a stable branch from
  Jakub that both io_uring and net-next has pulled in, and the io_uring
  changes are layered on top of that.

  All of the work has been done by Pavel"

* tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block: (34 commits)
  io_uring: notification completion optimisation
  io_uring: export req alloc from core
  io_uring/net: use unsigned for flags
  io_uring/net: make page accounting more consistent
  io_uring/net: checks errors of zc mem accounting
  io_uring/net: improve io_get_notif_slot types
  selftests/io_uring: test zerocopy send
  io_uring: enable managed frags with register buffers
  io_uring: add zc notification flush requests
  io_uring: rename IORING_OP_FILES_UPDATE
  io_uring: flush notifiers after sendzc
  io_uring: sendzc with fixed buffers
  io_uring: allow to pass addr into sendzc
  io_uring: account locked pages for non-fixed zc
  io_uring: wire send zc request type
  io_uring: add notification slot registration
  io_uring: add rsrc referencing for notifiers
  io_uring: complete notifiers in tw
  io_uring: cache struct io_notif
  io_uring: add zc notification infrastructure
  ...

Pull io_uring buffered writes support from Jens Axboe:
 "This contains support for buffered writes, specifically for XFS. btrfs
  is in progress, will be coming in the next release.

  io_uring does support buffered writes on any file type, but since the
  buffered write path just always -EAGAIN (or -EOPNOTSUPP) any attempt
  to do so if IOCB_NOWAIT is set, any buffered write will effectively be
  handled by io-wq offload. This isn't very efficient, and we even have
  specific code in io-wq to serialize buffered writes to the same inode
  to avoid further inefficiencies with thread offload.

  This is particularly sad since most buffered writes don't block, they
  simply copy data to a page and dirty it. With this pull request, we
  can handle buffered writes a lot more effiently.

  If balance_dirty_pages() needs to block, we back off on writes as
  indicated.

  This improves buffered write support by 2-3x.

  Jan Kara helped with the mm bits for this, and Stefan handled the
  fs/iomap/xfs/io_uring parts of it"

* tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block:
  mm: honor FGP_NOWAIT for page cache page allocation
  xfs: Add async buffered write support
  xfs: Specify lockmode when calling xfs_ilock_for_iomap()
  io_uring: Add tracepoint for short writes
  io_uring: fix issue with io_write() not always undoing sb_start_write()
  io_uring: Add support for async buffered writes
  fs: Add async write file modification handling.
  fs: Split off inode_needs_update_time and __file_update_time
  fs: add __remove_file_privs() with flags parameter
  fs: add a FMODE_BUF_WASYNC flags for f_mode
  iomap: Return -EAGAIN from iomap_write_iter()
  iomap: Add async buffered write support
  iomap: Add flags parameter to iomap_page_create()
  mm: Add balance_dirty_pages_ratelimited_flags() function
  mm: Move updates of dirty_exceeded into one place
  mm: Move starting of background writeback into the main balancing loop

Pull io_uring updates from Jens Axboe:

 - As per (valid) complaint in the last merge window, fs/io_uring.c has
   grown quite large these days. io_uring isn't really tied to fs
   either, as it supports a wide variety of functionality outside of
   that.

   Move the code to io_uring/ and split it into files that either
   implement a specific request type, and split some code into helpers
   as well. The code is organized a lot better like this, and io_uring.c
   is now < 4K LOC (me).

 - Deprecate the epoll_ctl opcode. It'll still work, just trigger a
   warning once if used. If we don't get any complaints on this, and I
   don't expect any, then we can fully remove it in a future release
   (me).

 - Improve the cancel hash locking (Hao)

 - kbuf cleanups (Hao)

 - Efficiency improvements to the task_work handling (Dylan, Pavel)

 - Provided buffer improvements (Dylan)

 - Add support for recv/recvmsg multishot support. This is similar to
   the accept (or poll) support for have for multishot, where a single
   SQE can trigger everytime data is received. For applications that
   expect to do more than a few receives on an instantiated socket, this
   greatly improves efficiency (Dylan).

 - Efficiency improvements for poll handling (Pavel)

 - Poll cancelation improvements (Pavel)

 - Allow specifiying a range for direct descriptor allocations (Pavel)

 - Cleanup the cqe32 handling (Pavel)

 - Move io_uring types to greatly cleanup the tracing (Pavel)

 - Tons of great code cleanups and improvements (Pavel)

 - Add a way to do sync cancelations rather than through the sqe -> cqe
   interface, as that's a lot easier to use for some use cases (me).

 - Add support to IORING_OP_MSG_RING for sending direct descriptors to a
   different ring. This avoids the usually problematic SCM case, as we
   disallow those. (me)

 - Make the per-command alloc cache we use for apoll generic, place
   limits on it, and use it for netmsg as well (me).

 - Various cleanups (me, Michal, Gustavo, Uros)

* tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits)
  io_uring: ensure REQ_F_ISREG is set async offload
  net: fix compat pointer in get_compat_msghdr()
  io_uring: Don't require reinitable percpu_ref
  io_uring: fix types in io_recvmsg_multishot_overflow
  io_uring: Use atomic_long_try_cmpxchg in __io_account_mem
  io_uring: support multishot in recvmsg
  net: copy from user before calling __get_compat_msghdr
  net: copy from user before calling __copy_msghdr
  io_uring: support 0 length iov in buffer select in compat
  io_uring: fix multishot ending when not polled
  io_uring: add netmsg cache
  io_uring: impose max limit on apoll cache
  io_uring: add abstraction around apoll cache
  io_uring: move apoll cache to poll.c
  io_uring: consolidate hash_locked io-wq handling
  io_uring: clear REQ_F_HASH_LOCKED on hash removal
  io_uring: don't race double poll setting REQ_F_ASYNC_DATA
  io_uring: don't miss setting REQ_F_DOUBLE_POLL
  io_uring: disable multishot recvmsg
  io_uring: only trace one of complete or overflow
  ...

Pull turbostat updates from Len Brown:
 "Only updating the turbostat tool here, no kernel changes"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2022.07.28
  tools/power turbostat: do not decode ACC for ICX and SPR
  tools/power turbostat: fix SPR PC6 limits
  tools/power turbostat: cleanup 'automatic_cstate_conversion_probe()'
  tools/power turbostat: separate SPR from ICX
  tools/power turbosstat: fix comment
  tools/power turbostat: Support RAPTORLAKE P
  tools/power turbostat: add support for ALDERLAKE_N
  tools/power turbostat: dump secondary Turbo-Ratio-Limit
  tools/power turbostat: simplify dump_turbo_ratio_limits()
  tools/power turbostat: dump CPUID.7.EDX.Hybrid
  tools/power turbostat: update turbostat.8
  tools/power turbostat: Show uncore frequency
  tools/power turbostat: Fix file pointer leak
  tools/power turbostat: replace strncmp with single character compare
  tools/power turbostat: print the kernel boot commandline
  tools/power turbostat: Introduce support for RaptorLake

Pull thermal control updates from Rafael Wysocki:
 "These start a rework of the handling of trip points in the thermal
  core, improve the cpufreq/devfreq cooling device handling, update some
  thermal control drivers and the tmon utility and clean up code.

  Specifics:

   - Consolidate the thermal core code by beginning to move the thermal
     trip structure from the thermal OF code as a generic structure to
     be used by the different sensors when registering a thermal zone
     (Daniel Lezcano).

   - Make per cpufreq / devfreq cooling device ops instead of using a
     global variable, fix comments and rework the trace information
     (Lukasz Luba).

   - Add the include/dt-bindings/thermal.h under the area covered by the
     thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).

   - Improve the error output by giving the sensor identification when a
     thermal zone failed to initialize, the DT bindings by changing the
     positive logic and adding the r8a779f0 support on the rcar3
     (Wolfram Sang).

   - Convert the QCom tsens DT binding to the dtsformat format
     (Krzysztof Kozlowski).

   - Remove the pointless get_trend() function in the QCom, Ux500 and
     tegra thermal drivers, along with the unused DROP_FULL and
     RAISE_FULL trends definitions. Simplify the code by using clamp()
     macros (Daniel Lezcano).

   - Fix ref_table memory leak at probe time on the k3_j72xx bandgap
     (Bryan Brattlof).

   - Fix array underflow in prep_lookup_table (Dan Carpenter).

   - Add static annotation to the k3_j72xx_bandgap_j7* data structure
     (Jin Xiaoyun).

   - Fix typos in comments detected on sun8i by Coccinelle (Julia
     Lawall).

   - Fix typos in comments on rzg2l (Biju Das).

   - Remove as unnecessary call to dev_err() as the error is already
     printed by the failing function on u8500 (Yang Li).

   - Register the thermal zones as hwmon sensors for the Qcom thermal
     sensors (Dmitry Baryshkov).

   - Fix 'tmon' tool compilation issue by adding phtread.h include
     (Markus Mayer).

   - Fix typo in the comments for the 'tmon' tool (Slark Xiao).

   - Make the thermal core use ida_alloc()/free() directly instead of
     ida_simple_get()/ida_simple_remove() that have been deprecated
     (keliu).

   - Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal
     control driver (Rafael Wysocki)"

* tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  thermal/of: Initialize trip points separately
  thermal/of: Use thermal trips stored in the thermal zone
  thermal/core: Add thermal_trip in thermal_zone
  thermal/core: Rename 'trips' to 'num_trips'
  thermal/core: Move thermal_set_delay_jiffies to static
  thermal/core: Remove unneeded EXPORT_SYMBOLS
  thermal/of: Move thermal_trip structure to thermal.h
  thermal/of: Remove the device node pointer for thermal_trip
  thermal/of: Replace device node match with device node search
  thermal/core: Remove duplicate information when an error occurs
  thermal/core: Avoid calling ->get_trip_temp() unnecessarily
  thermal/tools/tmon: Fix typo 'the the' in comment
  thermal/tools/tmon: Include pthread and time headers in tmon.h
  thermal/ti-soc-thermal: Fix comment typo
  thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
  thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
  thermal/drivers/u8500: Remove unnecessary print function dev_err()
  thermal/drivers/rzg2l: Fix comments
  thermal/drivers/sun8i: Fix typo in comment
  thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
  ...

Pull power management updates from Rafael Wysocki:
 "These are mostly minor improvements all over including new CPU IDs for
  the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
  power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
  updates, documentation cleanups and a new version of the pm-graph
  suite of utilities.

  Specifics:

   - Make cpufreq_show_cpus() more straightforward (Viresh Kumar).

   - Drop unnecessary CPU hotplug locking from store() used by cpufreq
     sysfs attributes (Viresh Kumar).

   - Make the ACPI cpufreq driver support the boost control interface on
     Zhaoxin/Centaur processors (Tony W Wang-oc).

   - Print a warning message on attempts to free an active cpufreq
     policy which should never happen (Viresh Kumar).

   - Fix grammar in the Kconfig help text for the loongson2 cpufreq
     driver (Randy Dunlap).

   - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
     governor (Zhao Liu).

   - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
     cpuidle driver (Eiichi Tsukata).

   - Modify intel_idle to treat C1 and C1E as independent idle states on
     Sapphire Rapids (Artem Bityutskiy).

   - Extend support for wakeirq to callback wrappers used during system
     suspend and resume (Ulf Hansson).

   - Defer waiting for device probe before loading a hibernation image
     till the first actual device access to avoid possible deadlocks
     reported by syzbot (Tetsuo Handa).

   - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
     Helgaas).

   - Add Raptor Lake-P to the list of processors supported by the Intel
     RAPL driver (George D Sworo).

   - Add Alder Lake-N and Raptor Lake-P to the list of processors for
     which Power Limit4 is supported in the Intel RAPL driver (Sumeet
     Pawnikar).

   - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
     attempting to remove it (Hsin-Yi Wang).

   - Change the Energy Model code to represent power in micro-Watts and
     adjust its users accordingly (Lukasz Luba).

   - Add new devfreq driver for Mediatek CCI (Cache Coherent
     Interconnect) (Johnson Wang).

   - Convert the Samsung Exynos SoC Bus bindings to DT schema of
     exynos-bus.c (Krzysztof Kozlowski).

   - Address kernel-doc warnings by adding the description for unused
     function parameters in devfreq core (Mauro Carvalho Chehab).

   - Use NULL to pass a null pointer rather than zero according to the
     function propotype in imx-bus.c (Colin Ian King).

   - Print error message instead of error interger value in
     tegra30-devfreq.c (Dmitry Osipenko).

   - Add checks to prevent setting negative frequency QoS limits for
     CPUs (Shivnandan Kumar).

   - Update the pm-graph suite of utilities to the latest revision 5.9
     including multiple improvements (Todd Brandt).

   - Drop pme_interrupt reference from the PCI power management
     documentation (Mario Limonciello)"

* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  PM: QoS: Add check to make sure CPU freq is non-negative
  PM: hibernate: defer device probing when resuming from hibernation
  intel_idle: make SPR C1 and C1E be independent
  cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
  cpufreq: loongson2: fix Kconfig "its" grammar
  pm-graph v5.9
  cpufreq: Warn users while freeing active policy
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers
  PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
  PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
  PM / devfreq: shut up kernel-doc warnings
  dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
  PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
  dt-bindings: interconnect: Add MediaTek CCI dt-bindings
  PM: domains: Ensure genpd_debugfs_dir exists before remove
  PM: runtime: Extend support for wakeirq for force_suspend|resume
  ...

Pull ACPI updates from Rafael Wysocki:
 "These rework the handling of ACPI device objects to use the driver
  core facilities for managing child ones instead of some questionable
  home-grown ways without the requisite locking and reference counting,
  clean up the EC driver, improve suspend-to-idle handling on x86, add
  some systems to the ACPI backlight quirk list, fix some assorted
  issues, clean up code and improve documentation.

  Specifics:

   - Use facilities provided by the driver core and some additional
     helpers to handle the children of a given ACPI device object in
     multiple places instead of using the children and node list heads
     in struct acpi_device which is error prone (Rafael Wysocki).

   - Fix ACPI-related device reference counting issue in the hisi_lpc
     bus driver (Yang Yingliang).

   - Drop the children and node list heads that are not needed any more
     from struct acpi_device (Rafael Wysocki).

   - Drop driver member from struct acpi_device (Uwe Kleine-König).

   - Drop redundant check from acpi_device_remove() (Uwe Kleine-König).

   - Prepare the CPPC library for handling backwards-compatible future
     _CPC return package formats gracefully (Rafael Wysocki).

   - Clean up the ACPI EC driver after previous changes in it (Hans de
     Goede).

   - Drop leftover acpi_processor_get_limit_info() declaration (Riwen
     Lu).

   - Split out thermal initialization from ACPI PSS (Riwen Lu).

   - Annotate more functions in the ACPI CPU idle driver to live in the
     cpuidle section (Guilherme G. Piccoli).

   - Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).

   - Implement a better fix to avoid spamming the console with old error
     logs (Tony Luck).

   - Fix typo in a comment in the APEI code (Xiang wangx).

   - Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
     Li).

   - Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
     suspend-to-idle driver for x86 platforms (Shyam Sundar S K).

   - Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
     in the LPIT table driver and the suspend-to-idle driver for x86
     platforms (Rafael Wysocki).

   - Print information messages regarding declared LPS0 idle support in
     the platform firmware (Rafael Wysocki).

   - Fix missing check in register_device_clock() in the ACPI driver for
     Intel SoCs (huhai).

   - Fix ACS setup in the VIOT table parser (Eric Auger).

   - Skip IRQ override on AMD Zen platforms where it's harmful
     (Chuanhong Guo).

   - Use native backlight on Dell Inspiron N4010 (Hans de Goede).

   - Use native backlight on some TongFang devices (Werner Sembach).

   - Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
     Lu).

   - Shorten the quirk list in the ACPI backlight driver by identifying
     Clevo by board_name only (Werner Sembach).

   - Remove useless NULL pointer checks from 2 ACPI PCI link management
     functions (Andrey Strachuk).

   - Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).

   - Update links and references to _DSD-related documents (Sudeep
     Holla)"

* tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (46 commits)
  ACPI/PCI: Remove useless NULL pointer checks
  ACPI: CPPC: Do not prevent CPPC from working in the future
  ACPI: PM: x86: Print messages regarding LPS0 idle support
  ACPI: resource: skip IRQ override on AMD Zen platforms
  Documentation: ACPI: EINJ: Fix obsolete example
  ACPI: video: Use native backlight on Dell Inspiron N4010
  ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
  Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
  ACPI: video: Shortening quirk list by identifying Clevo by board_name only
  ACPI: video: Force backlight native for some TongFang devices
  ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
  ACPI: VIOT: Fix ACS setup
  ACPI: bus: Drop unused list heads from struct acpi_device
  hisi_lpc: Use acpi_dev_for_each_child()
  bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
  ACPI: bus: Drop driver member of struct acpi_device
  ACPI: bus: Drop redundant check in acpi_device_remove()
  ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
  ACPI: LPSS: Fix missing check in register_device_clock()
  ACPI: APEI: Better fix to avoid spamming the console with old error logs
  ...

Pull hwmon updates from Guenter Roeck:

 - Substantial rewrite of lm90 driver to support several additional
   chips and improve support for existing chips.

 - Add support of ROG ZENITH II EXTREME, Maximus XI Hero, and
   Strix Z690-a D4 to asus-ec-sensors driver

 - Add support of F71858AD to f71882fg driver

 - Add support of Aquacomputer Quadro to aquacomputer_d5next driver

 - Improved assembler code and add support for Dell G5 5590 as well as
   XPS 13 7390 in dell-smm driver

 - Add support for ASUS TUF GAMING B550-PLUS WIFI II to nct775 driver

 - Add support for IEEE 754 half precision to PMBus core. Also support
   for Analog Devices LT7182S, improve regulator support, and report
   various MFR register values in debugfs.

 - Various other minor improvements and fixes

* tag 'hwmon-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (85 commits)
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller
  hwmon: (dell-smm) Improve documentation
  hwmon: (nct6775) add ASUS TUF GAMING B550-PLUS WIFI II
  hwmon: (occ) Replace open-coded variant of %*phN specifier
  hwmon: (sht15) Fix wrong assumptions in device remove callback
  hwmon: (aquacomputer_d5next) Add support for reading the +12V voltage sensor on D5 Next
  hwmon: (tps23861) fix byte order in current and voltage registers
  hwmon: (aspeed-pwm-tacho) increase fan tach period (again)
  hwmon: (aquacomputer_d5next) Add D5 Next fan control support
  hwmon: (mcp3021) improve driver support for newer hwmon interface
  hwmon: (asus-ec-sensors) add definitions for ROG ZENITH II EXTREME
  hwmon: (aquacomputer_d5next) Move device-specific data into struct aqc_data
  hwmon: (asus-ec-sensors) add missing sensors for X570-I GAMING
  hwmon: (drivetemp) Add module alias
  hwmon: (asus_wmi_sensors) Save a few bytes of memory
  hwmon: (lm90) Use worker for alarm notifications
  hwmon: (asus-ec-sensors) add support for Maximus XI Hero
  hwmon: (dell-smm) Improve assembly code
  hwmon: (pmbus/ltc2978) Set voltage resolution
  hwmon: (pmbus) Add list_voltage to pmbus ops
  ...

Merge tag 'pwm/for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "After v5.19 had all drivers converted to the new atomic API and nobody
  has reported any breakage, this set of changes starts by dropping the
  legacy support.

  Some existing drivers get improvements and broader chip support and a
  new driver is added that emulates a PWM controller using a clock
  output.

  Other than that there's the usual bits of cleanups and minor fixes"

* tag 'pwm/for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (21 commits)
  pwm: lpc18xx: Fix period handling
  pwm: lpc18xx: Convert to use dev_err_probe()
  pwm: twl-led: Document some limitations and link to the reference manual
  MAINTAINERS: Remove myself as PWM maintainer
  MAINTAINERS: Add include/dt-bindings/pwm to PWM SUBSYSTEM
  dt-bindings: pwm: mediatek: Add compatible string for MT8195
  pwm: Add clock based PWM output driver
  dt-bindings: pwm: Document clk based PWM controller
  pwm: sifive: Shut down hardware only after pwmchip_remove() completed
  pwm: sifive: Ensure the clk is enabled exactly once per running PWM
  pwm: sifive: Simplify clk handling
  pwm: sifive: Enable clk only after period check in .apply()
  pwm: sifive: Reduce time the controller lock is held
  pwm: sifive: Fold pwm_sifive_enable() into its only caller
  pwm: sifive: Simplify offset calculation for PWMCMP registers
  pwm: mediatek: Add MT8365 support
  dt-bindings: pwm: Add MT8365 SoC binding
  pwm: Drop unused forward declaration from pwm.h
  pwm: Reorder header file to get rid of struct pwm_capture forward declaration
  pwm: atmel-tcb: Fix typo in comment
  ...

Pull spi updates from Mark Brown:
 "The big update this time around is some excellent work from David
  Jander who went through the fast path and really eliminated overheads,
  meaning that we are seeing a huge reduction in the time spent between
  transfers for single threaded clients.

  Benchmarking has been coming out at about a halving of overhead which
  is clearly visible in system level usage that stresses SPI like some
  CAN and IIO applications, especially with small transfers. Thanks to
  David for taking the time to drill down into this and push the work
  upstream.

  Otherwise there's been a bunch of new device support and the usual
  updates.

   - Optimisation of the fast path, particularly around the number and
     types of locking operations, from David Jander.

   - Support for Arbel NPCM845, HP GXP, Intel Meteor Lake and Thunder
     Bay, MediaTek MT8188 and MT8365, Microchip FPGAs, nVidia Tegra 241
     and Samsung Exynos Auto v9 and 4210"

* tag 'spi-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (97 commits)
  MAINTAINERS: add spi support to GXP
  spi: dt-bindings: add documentation for hpe,gxp-spifi
  spi: spi-gxp: Add support for HPE GXP SoCs
  spi: a3700: support BE for AC5 SPI driver
  spi/panel: dt-bindings: drop CPHA and CPOL from common properties
  spi: bcm2835: enable shared interrupt support
  spi: dt-bindings: spi-controller: correct example indentation
  spi: dt-bindings: qcom,spi-geni-qcom: allow three interconnects
  spi: npcm-fiu: Add NPCM8XX support
  dt-binding: spi: Add npcm845 compatible to npcm-fiu document
  spi: npcm-fiu: Modify direct read dummy configuration
  spi: atmel: remove #ifdef CONFIG_{PM, SLEEP}
  spi: dt-bindings: Add compatible for MediaTek MT8188
  spi: dt-bindings: mediatek,spi-mtk-nor: Update bindings for nor flash
  spi: dt-bindings: atmel,at91rm9200-spi: convert to json-schema
  spi: tegra20-slink: fix UAF in tegra_slink_remove()
  spi: Fix simplification of devm_spi_register_controller
  spi: microchip-core: switch to use dev_err_probe()
  spi: microchip-core: switch to use devm_spi_alloc_master()
  spi: microchip-core: fix UAF in mchp_corespi_remove()
  ...

Pull regulator updates from Mark Brown:
 "This has been a fairly quiet release for the regulator API, a few new
  drivers and a small API update:

   - Support for specifying an initial load as part of requesting
     regulators through the bulk API

   - Support for Maxim MAX597x, Qualcomm PM8074, PM8909 and Realtek
     RT5120 devices"

* tag 'regulator-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (35 commits)
  regulator: core: Allow drivers to define their init data as const
  regulator: core: Allow specifying an initial load w/ the bulk API
  regulator: mt6380: Fix unused array warning
  regulator: Add missing type for 'regulator-microvolt-offset'
  regulator: core: Fix off-on-delay-us for always-on/boot-on regulators
  regulator: of: Fix refcount leak bug in of_get_regulation_constraints()
  regulator: pwm: Update Lee Jones' email address
  regulator: max597x: Don't return uninitialized variable in .probe
  regulator: qcom,spmi-regulator: add PMP8074 PMIC
  regulator: qcom,spmi-regulator: Convert to dtschema
  regulator: qcom_spmi: add support for PMP8074 regulators
  regulator: qcom_spmi: add support for HT_P600
  regulator: qcom_spmi: add support for HT_P150
  regulator: max597x: Remove unused including <linux/version.h>
  regulator: Fix MFD_MAX597X dependency
  regulator: Fix parameter declaration and spelling mistake.
  regulator: max597x: Add support for max597x regulator
  regulator: scmi: Add missing of_node_get()
  regulator: qcom_smd: Add PM8909 RPM regulators
  regulator: dt-bindings: qcom,smd-rpm: Add PM8909
  ...

Pull regmap updates from Mark Brown:
 "The big thing this release is a big cleanup of the interrupt code from
  Aidan MacDonald, plus a few new API updates:

   - Rework of the interrupt code, making it much simpler and easier to
     extend

   - Support for device specific update bits operations with devices
     that otherwise use bitstream interfaces

   - Support for bit operations on fields as well as whole registers"

* tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: permit to set reg_update_bits with bulk implementation
  regmap: add WARN_ONCE when invalid mask is provided to regmap_field_init()
  regmap-irq: Fix bug in regmap_irq_get_irq_reg_linear()
  regmap: cache: Add extra parameter check in regcache_init
  regmap-irq: Deprecate the not_fixed_stride flag
  regmap-irq: Add get_irq_reg() callback
  regmap-irq: Fix inverted handling of unmask registers
  regmap-irq: Deprecate type registers and virtual registers
  regmap-irq: Introduce config registers for irq types
  regmap-irq: Refactor checks for status bulk read support
  regmap-irq: Remove mask_writeonly and regmap_irq_update_bits()
  regmap-irq: Remove inappropriate uses of regmap_irq_update_bits()
  regmap-irq: Remove an unnecessary restriction on type_in_mask
  regmap-irq: Cleanup sizeof(...) use in memory allocation
  regmap-irq: Remove unused type_reg_stride field
  regmap-irq: Convert bool bitfields to unsigned int
  regmap: Don't warn about cache only mode for devices with no cache
  regmap: provide regmap_field helpers for simple bit operations
  regmap: cache: Fix syntax errors in comments

Pull ARM boardfile deprecation from Arnd Bergmann:
 "Over the past ten years, new machine support was based on device tree,
  and an initial set of about 400 boards using ATAGS with boardfile for
  booting were grandfathered in, with about half of them either removed
  or converted to DT over time.

  Based on the recent mailing list discussion I started, I have now
  turned the findings into a set of patches that marks most board files
  as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.

  For the boards that are marked as unused, there are two final chances
  for potential users: The removal is scheduled to take place after the
  longterm stable kernel at the end of 2022, so users can stay on that
  version for another few years, and if anyone still has one of these
  machines and is planning to keep updating kernels beyond that version,
  they can speak up now to have their boards taken off the list again.

  Waiting for the LTS release also makes sure that there will be at
  least one longterm kernel that contains the recent multiplatform
  conversion along while still supporting all legacy boards.

  The short summary of the current status is:

   - The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
     users and will be removed entirely.

   - The mmp and davinci platforms have DT support for the important
     machines and will become DT-only after this.

   - s3c64xx, dove, orion5x, and pxa keep some board files to allow
     those to be migrated over to DT more easily, but most board files
     are getting removed now. DT support on these platforms is partially
     working but requires changes to additional drivers for the other
     boards.

   - omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the
     moment but have some boards with known users. Removing the board
     files that nobody uses should make it easier to try a DT conversion
     if anyone cares.

  There is no explicit timeline what happens with the boards that remain
  after this removal, but I expect to revisit this in the future, and
  with most boards gone, there will be a good time to do a treewide
  review of platform drivers that never gained DT support and have no
  remaining in-tree board files"

Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/

* tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
  ARM: iop32x: mark as unused
  ARM: s3c: mark most board files as unused
  ARM: omap1: add Kconfig dependencies for unused boards
  ARM: sa1100: mark most boards as unused
  ARM: footbridge: mark cats board for removal
  ARM: mmp: mark all board files for removal
  ARM: ep93xx: mark most board files as unused
  ARM: davinci: mark all ATAGS board files as unused
  ARM: orion: add ATAGS dependencies
  ARM: pxa: add Kconfig dependencies for ATAGS based boards
  ARM: add CONFIG_UNUSED_BOARD_FILES
  ARM: add ATAGS dependencies to non-DT platforms

Pull ARM new SoC support from Arnd Bergmann:
 "This adds initial support for two SoC families that have been under
  review for a while. In both cases, the origonal idea was to have a
  minimally functional version, but we ended up leaving out the clk
  drivers that are still under review and will be merged through the
  corresponding subsystem tree.

  The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
  based on the 32-bit NPCM7xx family but is now getting added to
  arch/arm64 as well.

  Sunplus SP7021, also known as Plus1, is a general-purpose
  System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
  chip, plus an I/O chip and memory in the same"

* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
  arm64: defconfig: Add Nuvoton NPCM family support
  arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  arm64: dts: nuvoton: Add initial NPCM8XX device tree
  arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  dt-bindings: arm: npcm: Add maintainer
  reset: npcm: Add NPCM8XX support
  dt-bindings: reset: npcm: Add support for NPCM8XX
  reset: npcm: using syscon instead of device data
  ARM: dts: nuvoton: add reset syscon property
  dt-bindings: reset: npcm: add GCR syscon property
  dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  dt-bindings: watchdog: npcm: Add npcm845 compatible string
  dt-bindings: timer: npcm: Add npcm845 compatible string
  ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
  ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
  ARM: sunplus: Add initial support for Sunplus SP7021 SoC
  irqchip: Add Sunplus SP7021 interrupt controller driver
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "This branch includes the usual updates to defconfig files, enabling
  additional driver support for the supported platforms.

  There is also a global refresh for all of them that reorders the lines
  according to the 'savedefconfig' output, but without removing lines
  that are no longer part of the refresh.

  I went through the most common removed lines to also address them
  while making sure to catch renamed options and add them back under the
  new name.

  The boardfile deprecation branch is based on top of this to avoid
  conflicts against removing the unused boardfile configs from the
  generic defconfig files"

* tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: defconfig: Sync some configs with savedefconfig
  arm64: refresh defconfig file
  ARM: defconfig: kill remnants of CONFIG_LEDS
  ARM: defconfig: remove broken CONFIG_THUMB disables
  ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y
  ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries
  ARM: defconfig: remove irda remnants
  ARM: refresh defconfig files
  arm64: defconfig: Demote Qualcomm USB PHYs to modules
  arm64: defconfig: Enable Qualcomm SC8280XP providers
  ARM: multi_v7_defconfig: Update configs for BCM63138
  arm64: defconfig: enable Qualcomm Bandwidth Monitor
  arm64: defconfig: Enable Allwinner built in CODECs
  arm64: defconfig: Enable qcom interconnect drivers
  arm64: defconfig: Enable qcom ss & hs usb phy
  arm64: defconfig: enable Qualcomm LPG leds driver
  arm64: defconfig: Enable gpio-fan support
  arm64: defconfig: Enable DRM_V3D
  ARM: configs: Enable DRM_V3D
  arm64: defconfig: Enable R8A779G0 SoC
  ...

Pull ARM DT updates from Arnd Bergmann:
 "As usual, the bulk of the changes for the SoC tree are devicetree file
  updates, and most of these changes are for 64-bit embedded machines.
  As before, there are a ton of style cleanups, and additional hardware
  support for existing machines.

  Looking only at the new SoC, the notable additions are:

   - A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
     BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
     BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
     with a corresponding reference board.

   - The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
     i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
     NPU.

   - Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
     Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
     SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
     added here in addition to the reference boards.

   - Allwinner H616, a newer version of the H6 SoC, targeted at
     Set-top-box applications. It comes with dts files for the Orange Pi
     zero2 single-board computer and the X96 Mate set-top-box

   - Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
     Armada SoC family based on the Cortex-A55 core.

  New machines based on previously supported SoCs include:

   - Several new machines on NXP i.MX platforms: multiple Toradex
     Colibri boards using the "Iris" and "Ixora" carriers, DH
     electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
     phytech phyBOARD-Polis-i.MX8MM.

   - Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
     10 Software Virtual platform, both in the SoCFPGA platform.

   - Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
     Router and the Cisco Meraki MR26 access point

   - Improved Chromebook support for both the Mediatek and Qualcomm SoC
     families brought added machines: Acer Chromebook 514 (MT8192), Acer
     Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
     including the Lenovo IdeaPad Chromebook Duet 3.

   - Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
     Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.

   - Finally, there are a few development board on other chips: PCB8309
     (Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
     Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"

* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
  dt-bindings: soc: bcm: use absolute path to other schema
  dt-bindings: soc: bcm: drop quotes when not needed
  dt-bindings: soc: microchip: use absolute path to other schema
  dt-bindings: soc: microchip: drop quotes when not needed
  ARM: dts: lan966x: keep lan966 entries alphabetically sorted
  ARM: dts: lan966x: add support for pcb8309
  dt-bindings: arm: at91: add lan966 pcb8309 board
  ARM: dts: lan966x: Enable network driver on pcb8291
  ARM: dts: lan966x: Disable can0 on pcb8291
  ARM: dts: lan966x: Add gpio-restart
  dt-bindings: arm: aspeed: add Aspeed Evaluation boards
  arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
  dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
  dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
  dt-bindings: arm: qcom: add missing SM6350 board compatibles
  dt-bindings: arm: qcom: add missing SM6125 board compatibles
  dt-bindings: arm: qcom: add missing SDM845 board compatibles
  dt-bindings: arm: qcom: add missing SDM636 board compatibles
  dt-bindings: arm: qcom: add missing SDM630 board compatibles
  dt-bindings: arm: qcom: add missing QCS404 board compatibles
  ...

Pull ARM SoC drivers from Arnd Bergmann:
 "The SoC driver updates contain changes to improve support for
  additional SoC variants, as well as cleanups an minor bugfixes
  in a number of existing drivers.

  Notable updates this time include:

   - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers

   - Updates for interconnect drivers on Qualcomm Snapdragon

   - A new driver support for NMI interrupts on Fujitsu A64fx

   - A rework of Broadcom BCMBCA Kconfig dependencies

   - Improved support for BCM2711 (Raspberry Pi 4) power management to
     allow the use of the V3D GPU

   - Cleanups to the NXP guts driver

   - Arm SCMI firmware driver updates to add tracing support, and use
     the firmware interfaces for system power control and for power
     capping"

* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
  soc: a64fx-diag: disable modular build
  dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
  dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
  dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
  ARM: mach-qcom: Add support for MSM8909
  dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
  soc: qcom: spm: Add CPU data for MSM8909
  dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
  soc: qcom: rpmpd: Add compatible for MSM8909
  dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
  soc: qcom: smd-rpm: Add compatible for MSM8909
  dt-bindings: soc: qcom: smd-rpm: Add MSM8909
  soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
  soc: fujitsu: Add A64FX diagnostic interrupt driver
  soc: qcom: socinfo: Fix the id of SA8540P SoC
  soc: qcom: Make QCOM_RPMPD depend on PM
  tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "The updates for arch/arm/mach-* platform code this time are mainly
  minor cleanups.

  Most notably, the DaVinci DM644x/DM646x SoC support gets removed. This
  was also scheduled for later removal early next year, but Linus
  Walleij asked for having them removed earlier to avoid problems for
  the GPIO subsystem"

* tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  ARM: at91: setup outer cache .write_sec() callback if needed
  ARM: at91: add sam_linux_is_optee_available() function
  ARM: Marvell: Update PCIe fixup
  ARM: bcmbca: Include full family name in Kconfig
  ARM: bcm: NSP: Removed forced thermal selection
  ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  arm: bcmbca: Add BCMBCA sub platforms
  arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA
  MAINTAINERS: Move BCM63138 to bcmbca arch entry
  ARM: shmobile: rcar-gen2: Increase refcount for new reference
  ARM: davinci: Delete DM646x board files
  ARM: davinci: Delete DM644x board files
  firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call
  cpufreq: zynq: Fix refcount leak in zynq_get_revision
  ARM: OMAP2+: Kconfig: Fix indentation
  ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
  ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
  ARM: OMAP2+: display: Fix refcount leak bug
  ARM: OMAP2+: Fix refcount leak in omapdss_init_of
  ARM: imx25: support silicon revision 1.2
  ...

Pull irq updates from Thomas Gleixner:
 "Updates for interrupt core and drivers:

  Core:

   - Fix a few inconsistencies between UP and SMP vs interrupt
     affinities

   - Small updates and cleanups all over the place

  New drivers:

   - LoongArch interrupt controller

   - Renesas RZ/G2L interrupt controller

  Updates:

   - Hotpath optimization for SiFive PLIC

   - Workaround for broken PLIC edge triggered interrupts

   - Simall cleanups and improvements as usual"

* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  irqchip/mmp: Declare init functions in common header file
  irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
  genirq: Use for_each_action_of_desc in actions_show()
  irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
  irqchip: Add LoongArch CPU interrupt controller support
  irqchip: Add Loongson Extended I/O interrupt controller support
  irqchip/loongson-liointc: Add ACPI init support
  irqchip/loongson-pch-msi: Add ACPI init support
  irqchip/loongson-pch-pic: Add ACPI init support
  irqchip: Add Loongson PCH LPC controller support
  LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
  LoongArch: Use ACPI_GENERIC_GSI for gsi handling
  genirq/generic_chip: Export irq_unmap_generic_chip
  ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
  APCI: irq: Add support for multiple GSI domains
  LoongArch: Provisionally add ACPICA data structures
  irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
  irqdomain: Report irq number for NOMAP domains
  irqchip/gic-v3: Fix comment typo
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
  ...

Pull timer updates from Thomas Gleixner:
 "Timers, timekeeping and related drivers update:

  Core:

   - Make wait_event_hrtimeout() aware of RT/DL tasks

  New drivers:

   - R-Car Gen4 timer

   - Tegra186 timer

   - Mediatek MT6795 CPUXGPT timer

  Updates:

   - Rework suspend/resume handling in timer drivers so it
     takes inactive clocks into account.

   - The usual device tree compatible add ons

   - Small fixed and cleanups all over the place"

* tag 'timers-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  wait: Fix __wait_event_hrtimeout for RT/DL tasks
  clocksource/drivers/sun5i: Remove unnecessary (void*) conversions
  dt-bindings: timer: allwinner,sun4i-a10-timer: Add D1 compatible
  dt-bindings: timer: ingenic,tcu: use absolute path to other schema
  clocksource/drivers/sun4i: Remove unnecessary (void*) conversions
  dt-bindings: timer: renesas,cmt: Fix R-Car Gen4 fall-out
  clocksource/drivers/tegra186: Put Kconfig option 'tristate' to 'bool'
  clocksource/drivers/timer-ti-dm: Make driver selection bool for TI K3
  clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs
  clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3
  clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6
  clocksource/drivers/sh_cmt: Add R-Car Gen4 support
  dt-bindings: timer: renesas,cmt: R-Car V3U is R-Car Gen4
  dt-bindings: timer: renesas,cmt: Add r8a779f0 and generic Gen4 CMT support
  clocksource/drivers/timer-microchip-pit64b: Fix compilation warnings
  clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume}
  clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce
  thermal/drivers/rcar_gen3_thermal: Add r8a779f0 support
  clocksource/drivers/timer-mediatek: Implement CPUXGPT timers
  dt-bindings: timer: mediatek: Add CPUX System Timer and MT6795 compatible
  ...

Pull perf events updates from Ingo Molnar:

 - Fix Intel Alder Lake PEBS memory access latency & data source
   profiling info bugs.

 - Use Intel large-PEBS hardware feature in more circumstances, to
   reduce PMI overhead & reduce sampling data.

 - Extend the lost-sample profiling output with the PERF_FORMAT_LOST ABI
   variant, which tells tooling the exact number of samples lost.

 - Add new IBS register bits definitions.

 - AMD uncore events: Add PerfMonV2 DF (Data Fabric) enhancements.

* tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/ibs: Add new IBS register bits into header
  perf/x86/intel: Fix PEBS data source encoding for ADL
  perf/x86/intel: Fix PEBS memory access info encoding for ADL
  perf/core: Add a new read format to get a number of lost samples
  perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments
  perf/x86/amd/uncore: Add PerfMonV2 DF event format
  perf/x86/amd/uncore: Detect available DF counters
  perf/x86/amd/uncore: Use attr_update for format attributes
  perf/x86/amd/uncore: Use dynamic events array
  x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE

Pull locking updates from Ingo Molnar:
 "This was a fairly quiet cycle for the locking subsystem:

   - lockdep: Fix a handful of the more complex lockdep_init_map_*()
     primitives that can lose the lock_type & cause false reports. No
     such mishap was observed in the wild.

   - jump_label improvements: simplify the cross-arch support of initial
     NOP patching by making it arch-specific code (used on MIPS only),
     and remove the s390 initial NOP patching that was superfluous"

* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix lockdep_init_map_*() confusion
  jump_label: make initial NOP patching the special case
  jump_label: mips: move module NOP patching into arch code
  jump_label: s390: avoid pointless initial NOP patching

Pull scheduler updates from Ingo Molnar:
"Load-balancing improvements:

   - Improve NUMA balancing on AMD Zen systems for affine workloads.

   - Improve the handling of reduced-capacity CPUs in load-balancing.

   - Energy Model improvements: fix & refine all the energy fairness
     metrics (PELT), and remove the conservative threshold requiring 6%
     energy savings to migrate a task. Doing this improves power
     efficiency for most workloads, and also increases the reliability
     of energy-efficiency scheduling.

   - Optimize/tweak select_idle_cpu() to spend (much) less time
     searching for an idle CPU on overloaded systems. There's reports of
     several milliseconds spent there on large systems with large
     workloads ...

     [ Since the search logic changed, there might be behavioral side
       effects. ]

   - Improve NUMA imbalance behavior. On certain systems with spare
     capacity, initial placement of tasks is non-deterministic, and such
     an artificial placement imbalance can persist for a long time,
     hurting (and sometimes helping) performance.

     The fix is to make fork-time task placement consistent with runtime
     NUMA balancing placement.

     Note that some performance regressions were reported against this,
     caused by workloads that are not memory bandwith limited, which
     benefit from the artificial locality of the placement bug(s). Mel
     Gorman's conclusion, with which we concur, was that consistency is
     better than random workload benefits from non-deterministic bugs:

        "Given there is no crystal ball and it's a tradeoff, I think
         it's better to be consistent and use similar logic at both fork
         time and runtime even if it doesn't have universal benefit."

   - Improve core scheduling by fixing a bug in
     sched_core_update_cookie() that caused unnecessary forced idling.

   - Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs
     for newly woken tasks.

   - Fix a newidle balancing bug that introduced unnecessary wakeup
     latencies.

  ABI improvements/fixes:

   - Do not check capabilities and do not issue capability check denial
     messages when a scheduler syscall doesn't require privileges. (Such
     as increasing niceness.)

   - Add forced-idle accounting to cgroups too.

   - Fix/improve the RSEQ ABI to not just silently accept unknown flags.
     (No existing tooling is known to have learned to rely on the
     previous behavior.)

   - Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags.

  Optimizations:

   - Optimize & simplify leaf_cfs_rq_list()

   - Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg().

  Misc fixes & cleanups:

   - Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems.

   - Fix a full-NOHZ bug that can in some cases result in the tick not
     being re-enabled when the last SCHED_RT task is gone from a
     runqueue but there's still SCHED_OTHER tasks around.

   - Various PREEMPT_RT related fixes.

   - Misc cleanups & smaller fixes"

* tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  rseq: Kill process when unknown flags are encountered in ABI structures
  rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags
  sched/core: Fix the bug that task won't enqueue into core tree when update cookie
  nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
  sched/core: Always flush pending blk_plug
  sched/fair: fix case with reduced capacity CPU
  sched/core: Use try_cmpxchg in set_nr_{and_not,if}_polling
  sched/core: add forced idle accounting for cgroups
  sched/fair: Remove the energy margin in feec()
  sched/fair: Remove task_util from effective utilization in feec()
  sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu()
  sched/fair: Rename select_idle_mask to select_rq_mask
  sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()
  sched/fair: Decay task PELT values during wakeup migration
  sched/fair: Provide u64 read for 32-bits arch helper
  sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
  sched: only perform capability check on privileged operation
  sched: Remove unused function group_first_cpu()
  sched/fair: Remove redundant word " *"
  selftests/rseq: check if libc rseq support is registered
  ...

Pull slab updates from Vlastimil Babka:

 - An addition of 'accounted' flag to slab allocation tracepoints to
   indicate memcg_kmem accounting, by Vasily

 - An optimization of memcg handling in freeing paths, by Muchun

 - Various smaller fixes and cleanups

* tag 'slab-for-5.20_or_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab_common: move generic bulk alloc/free functions to SLOB
  mm/sl[au]b: use own bulk free function when bulk alloc failed
  mm: slab: optimize memcg_slab_free_hook()
  mm/tracing: add 'accounted' entry into output of allocation tracepoints
  tools/vm/slabinfo: Handle files in debugfs
  mm/slub: Simplify __kmem_cache_alias()
  mm, slab: fix bad alignments

It's not possible for inode->i_security to be NULL here because every
inode will call inode_init_always and then lsm_inode_alloc to alloc
memory for inode->security, this is what LSM infrastructure management
do, so remove this redundant code.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Simplify the code by using kstrndup instead of kzalloc and strncpy in
smk_parse_smack(), which meanwhile remove strncpy as [1] suggests.

[1]: https://github.com/KSPP/linux/issues/90Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Pull arm64 updates from Will Deacon:
 "Highlights include a major rework of our kPTI page-table rewriting
  code (which makes it both more maintainable and considerably faster in
  the cases where it is required) as well as significant changes to our
  early boot code to reduce the need for data cache maintenance and
  greatly simplify the KASLR relocation dance.

  Summary:

   - Remove unused generic cpuidle support (replaced by PSCI version)

   - Fix documentation describing the kernel virtual address space

   - Handling of some new CPU errata in Arm implementations

   - Rework of our exception table code in preparation for handling
     machine checks (i.e. RAS errors) more gracefully

   - Switch over to the generic implementation of ioremap()

   - Fix lockdep tracking in NMI context

   - Instrument our memory barrier macros for KCSAN

   - Rework of the kPTI G->nG page-table repainting so that the MMU
     remains enabled and the boot time is no longer slowed to a crawl
     for systems which require the late remapping

   - Enable support for direct swapping of 2MiB transparent huge-pages
     on systems without MTE

   - Fix handling of MTE tags with allocating new pages with HW KASAN

   - Expose the SMIDR register to userspace via sysfs

   - Continued rework of the stack unwinder, particularly improving the
     behaviour under KASAN

   - More repainting of our system register definitions to match the
     architectural terminology

   - Improvements to the layout of the vDSO objects

   - Support for allocating additional bits of HWCAP2 and exposing
     FEAT_EBF16 to userspace on CPUs that support it

   - Considerable rework and optimisation of our early boot code to
     reduce the need for cache maintenance and avoid jumping in and out
     of the kernel when handling relocation under KASLR

   - Support for disabling SVE and SME support on the kernel
     command-line

   - Support for the Hisilicon HNS3 PMU

   - Miscellanous cleanups, trivial updates and minor fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
  arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
  arm64: fix KASAN_INLINE
  arm64/hwcap: Support FEAT_EBF16
  arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
  arm64/hwcap: Document allocation of upper bits of AT_HWCAP
  arm64: enable THP_SWAP for arm64
  arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
  arm64: errata: Remove AES hwcap for COMPAT tasks
  arm64: numa: Don't check node against MAX_NUMNODES
  drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
  perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
  docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
  arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
  mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
  mm: kasan: Skip unpoisoning of user pages
  mm: kasan: Ensure the tags are visible before the tag in page->flags
  drivers/perf: hisi: add driver for HNS3 PMU
  drivers/perf: hisi: Add description for HNS3 PMU driver
  drivers/perf: riscv_pmu_sbi: perf format
  perf/arm-cci: Use the bitmap API to allocate bitmaps
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Use RNG seed from bootinfo block on virt platform

 - defconfig updates

 - Minor fixes and improvements

* tag 'm68k-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v5.19-rc1
  m68k: Add common forward declaration for show_registers()
  m68k: mac: Remove forward declaration for mac_nmi_handler()
  m68k: virt: Fix missing platform_device_unregister() on error in virt_platform_init()
  m68k: virt: Use RNG seed from bootinfo block
  m68k: bitops: Change __fls to return and accept unsigned long
  m68k: Kconfig.machine: Add endif comment
  m68k: Kconfig.debug: Replace single quotes
  m68k: Kconfig.cpu: Fix indentation and add endif comments
  m68k: q40: Align '*' in comments
  m68k: sun3: Use __func__ to get function's name in an output message
  m68k: mac: Fix typos in comments
  m68k: virt: Kconfig minor fixes

Pull x86 kdump updates from Borislav Petkov:

 - Add the ability to pass early an RNG seed to the kernel from the boot
   loader

 - Add the ability to pass the IMA measurement of kernel and bootloader
   to the kexec-ed kernel

* tag 'x86_kdump_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/setup: Use rng seeds from setup_data
  x86/kexec: Carry forward IMA measurement log on kexec

Pull x86 build updates from Borislav Petkov:

 - Fix stack protector builds when cross compiling with Clang

 - Other Kbuild improvements and fixes

* tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/purgatory: Omit use of bin2c
  x86/purgatory: Hard-code obj-y in Makefile
  x86/build: Remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
  x86/Kconfig: Fix CONFIG_CC_HAS_SANE_STACKPROTECTOR when cross compiling with clang