- 08 Dec, 2022 12 commits
-
-
Dmitry Torokhov authored
Remove tests for SPI device or I2C client to be non-NULL because driver core will never call driver's probe method without having a valid device structure. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Michael Kelley authored
The error message in __crb_relinquish_locality() mentions requestAccess instead of Relinquish. Fix it. Fixes: 888d867d ("tpm: cmd_ready command can be issued only after granting locality") Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
-
Yuan Can authored
The ftpm_mod_init() returns the driver_register() directly without checking its return value, if driver_register() failed, the ftpm_tee_plat_driver is not unregistered. Fix by unregister ftpm_tee_plat_driver when driver_register() failed. Fixes: 9f1944c2 ("tpm_ftpm_tee: register driver on TEE bus") Signed-off-by:
Yuan Can <yuancan@huawei.com> Reviewed-by:
Maxim Uvarov <maxim.uvarov@linaro.org> Acked-by:
-
Hanjun Guo authored
In check_acpi_tpm2(), we get the TPM2 table just to make sure the table is there, not used after the init, so the acpi_put_table() should be added to release the ACPI memory. Fixes: 4cb586a1 ("tpm_tis: Consolidate the platform and acpi probe flow") Cc: stable@vger.kernel.org Signed-off-by:
Hanjun Guo <guohanjun@huawei.com> Signed-off-by:
-
Hanjun Guo authored
In crb_acpi_add(), we get the TPM2 table to retrieve information like start method, and then assign them to the priv data, so the TPM2 table is not used after the init, should be freed, call acpi_put_table() to fix the memory leak. Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Cc: stable@vger.kernel.org Signed-off-by:
-
Hanjun Guo authored
The start and length of the event log area are obtained from TPM2 or TCPA table, so we call acpi_get_table() to get the ACPI information, but the acpi_get_table() should be coupled with acpi_put_table() to release the ACPI memory, add the acpi_put_table() properly to fix the memory leak. While we are at it, remove the redundant empty line at the end of the tpm_read_log_acpi(). Fixes: 0bfb2374 ("tpm: Move eventlog files to a subdirectory") Fixes: 85467f63 ("tpm: Add support for event log pointer found in TPM2 ACPI table") Cc: stable@vger.kernel.org Signed-off-by:
-
Eddie James authored
The check for cancelled request depends on the VID of the chip, but some chips share VID which shouldn't share their cancellation behavior. This is the case for the Nuvoton NPCT75X, which should use the default cancellation check, not the Winbond one. To avoid changing the existing behavior, add a new flag to indicate that the chip should use the default cancellation check and set it for the I2C TPM2 TIS driver. Fixes: bbc23a07 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core") Signed-off-by:
Eddie James <eajames@linux.ibm.com> Tested-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
-
Eddie James authored
The sanity check mask for TPM_INT_ENABLE register was off by 8 bits, resulting in failure to probe if the TPM_INT_ENABLE register was a valid value. Fixes: bbc23a07 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core") Signed-off-by:
-
Sumit Garg authored
TEE trusted keys support depends on registered shared memory support since the key buffers are needed to be registered with OP-TEE. So make that dependency explicit to not register trusted keys support if underlying implementation doesn't support registered shared memory. Signed-off-by:
Sumit Garg <sumit.garg@linaro.org> Tested-by:
Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by:
-
Ard Biesheuvel authored
The TPM code registers put_device() as a devm cleanup handler, and casts the reference to the right function pointer type for this to be permitted by the compiler. However, under kCFI, this is rejected at runtime, resulting in a splat like CFI failure at devm_action_release+0x24/0x3c (target: put_device+0x0/0x24; expected type: 0xa488ebfc) Internal error: Oops - CFI: 0000000000000000 [#1] PREEMPT SMP Modules linked in: ... CPU: 20 PID: 454 Comm: systemd-udevd Not tainted 6.1.0-rc1+ #51 Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Oct 3 2022 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : devm_action_release+0x24/0x3c lr : devres_release_all+0xb4/0x114 sp : ffff800009bb3630 x29: ffff800009bb3630 x28: 0000000000000000 x27: 0000000000000011 x26: ffffaa6f9922c0c8 x25: 0000000000000002 x24: 000000000000000f x23: ffff800009bb3648 x22: ffff7aefc3be2100 x21: ffff7aefc3be2e00 x20: 0000000000000005 x19: ffff7aefc1e1ec10 x18: ffff800009af70a8 x17: 00000000a488ebfc x16: 0000000094ee7df3 x15: 0000000000000000 x14: 4075c5c2ef7affff x13: e46a91c5c5e2ef42 x12: ffff7aefc2c57540 x11: 0000000000000001 x10: 0000000000000001 x9 : 0000000100000000 x8 : ffffaa6fa09b39b4 x7 : 7f7f7f7f7f7f7f7f x6 : 8000000000000000 x5 : 000000008020000e x4 : ffff7aefc2c57500 x3 : ffff800009bb3648 x2 : ffff800009bb3648 x1 : ffff7aefc3be2e80 x0 : ffff7aefc3bb7000 Call trace: devm_action_release+0x24/0x3c devres_release_all+0xb4/0x114 really_probe+0xb0/0x49c __driver_probe_device+0x114/0x180 driver_probe_device+0x48/0x1ec __driver_attach+0x118/0x284 bus_for_each_dev+0x94/0xe4 driver_attach+0x24/0x34 bus_add_driver+0x10c/0x220 driver_register+0x78/0x118 __platform_driver_register+0x24/0x34 init_module+0x20/0xfe4 [tpm_tis_synquacer] do_one_initcall+0xd4/0x248 do_init_module+0x44/0x28c load_module+0x16b4/0x1920 Fix this by going through a helper function of the correct type. Signed-off-by:Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
-
Dmitry Torokhov authored
Switch the driver from legacy gpio API (that uses flat GPIO numbering) to the newer gpiod API (which used descriptors and respects line polarities specified in ACPI or device tree). Because gpio handling code for SPI and I2C variants duplicates each other it is moved into the core code for the driver. Also, it seems that the driver never assigned tpm_dev->io_lpcpd in the past, so gpio-based power management was most likely not working ever. Signed-off-by:
-
Dmitry Torokhov authored
Drop support for platform data from the driver because there are no users of st33zp24_platform_data structure in the mainline kernel. Signed-off-by:
-
- 07 Dec, 2022 4 commits
-
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Hans de Goede: "A single fix for 6.1 for suspend/resume issues on some AMD systems" * tag 'platform-drivers-x86-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/amd: pmc: Add a workaround for an s0i3 issue on Cezanne
-
Dave Wysochanski authored
If a cookie expires from the LRU and the LRU_DISCARD flag is set, but the state machine has not run yet, it's possible another thread can call fscache_use_cookie and begin to use it. When the cookie_worker finally runs, it will see the LRU_DISCARD flag set, transition the cookie->state to LRU_DISCARDING, which will then withdraw the cookie. Once the cookie is withdrawn the object is removed the below oops will occur because the object associated with the cookie is now NULL. Fix the oops by clearing the LRU_DISCARD bit if another thread uses the cookie before the cookie_worker runs. BUG: kernel NULL pointer dereference, address: 0000000000000008 ... CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G E 6.0.0-5.dneg.x86_64 #1 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs] RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles] ... Call Trace: netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs] process_one_work+0x217/0x3e0 worker_thread+0x4a/0x3b0 kthread+0xd6/0x100 Fixes: 12bb21a2 ("fscache: Implement cookie user counting and resource pinning") Reported-by:Daire Byrne <daire.byrne@gmail.com> Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Daire Byrne <daire@dneg.com> Link: https://lore.kernel.org/r/20221117115023.1350181-1-dwysocha@redhat.com/ # v1 Link: https://lore.kernel.org/r/20221117142915.1366990-1-dwysocha@redhat.com/ # v2 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hans Verkuil authored
While vb2_mmap took the mmap_lock mutex, vb2_get_unmapped_area didn't. Add this. Also take this opportunity to move the 'q->memory != VB2_MEMORY_MMAP' check and vb2_fileio_is_active() check into __find_plane_by_offset() so both vb2_mmap and vb2_get_unmapped_area do the same checks. Since q->memory is checked while mmap_lock is held, also take that lock in reqbufs and create_bufs when it is set, and set it back to MEMORY_UNKNOWN on error. Fixes: f035eb4e ("[media] videobuf2: fix lockdep warning") Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Tomasz Figa <tfiga@chromium.org> Reviewed-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Mario Limonciello authored
Cezanne platforms under the right circumstances have a synchronization problem where attempting to enter s2idle may fail if the x86 cores are put into HLT before hardware resume from the previous attempt has completed. To avoid this issue add a 10-20ms delay before entering s2idle another time. This workaround will only be applied on interrupts that wake the hardware but don't break the s2idle loop. Cc: stable@vger.kernel.org # 6.1 Cc: "Mahapatra, Rajib" <Rajib.Mahapatra@amd.com> Cc: "Raul Rangel" <rrangel@chromium.org> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221116154341.13382-1-mario.limonciello@amd.comReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 06 Dec, 2022 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Revert the dropping of the cache invalidation from the arm64 arch_dma_prep_coherent() as it caused a regression in the qcom_q6v5_mss remoteproc driver. The driver is already buggy but the original arm64 change made the problem obvious. The change will be re-introduced once the driver is fixed" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Unless anything comes from the ARM side, this should be the last pull request for this release - and it's mostly documentation: - Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns - s390: fix multi-epoch extension in nested guests - x86: fix uninitialized variable on nested triple fault" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns KVM: Move halt-polling documentation into common directory KVM: x86: fix uninitialized variable use on KVM_REQ_TRIPLE_FAULT KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Two zero-day fixes for the xen-netback driver (XSA-423 and XSA-424)" * tag 'for-linus-xsa-6.1-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netback: don't call kfree_skb() with interrupts disabled xen/netback: Ensure protocol headers don't fall in the non-linear area
-
Will Deacon authored
This reverts commit c44094ee. Although the semantics of the DMA API require only a clean operation here, it turns out that the Qualcomm 'qcom_q6v5_mss' remoteproc driver (ab)uses the DMA API for transferring the modem firmware to the secure world via calls to Trustzone [1]. Once the firmware buffer has changed hands, _any_ access from the non-secure side (i.e. Linux) will be detected on the bus and result in a full system reset [2]. Although this is possible even with this revert in place (due to speculative reads via the cacheable linear alias of memory), anecdotally the problem occurs considerably more frequently when the lines have not been invalidated, assumedly due to some micro-architectural interactions with the cache hierarchy. Revert the offending change for now, along with a comment, so that the Qualcomm developers have time to fix the driver [3] to use a firmware buffer which does not have a cacheable alias in the linear map. Link: https://lore.kernel.org/r/20221114110329.68413-1-manivannan.sadhasivam@linaro.org [1] Link: https://lore.kernel.org/r/CAMi1Hd3H2k1J8hJ6e-Miy5+nVDNzv6qQ3nN-9929B0GbHJkXEg@mail.gmail.com/ [2] Link: https://lore.kernel.org/r/20221206092152.GD15486@thinkpad [2] Reported-by:
Amit Pundir <amit.pundir@linaro.org> Reported-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by:
Will Deacon <will@kernel.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Juergen Gross authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So remove kfree_skb() from the spin_lock_irqsave() section and use the already existing "drop" label in xenvif_start_xmit() for dropping the SKB. At the same time replace the dev_kfree_skb() call there with a call of dev_kfree_skb_any(), as xenvif_start_xmit() can be called with disabled interrupts. This is XSA-424 / CVE-2022-42328 / CVE-2022-42329. Fixes: be81992f ("xen/netback: don't queue unlimited number of packages") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Ross Lagerwall authored
In some cases, the frontend may send a packet where the protocol headers are spread across multiple slots. This would result in netback creating an skb where the protocol headers spill over into the non-linear area. Some drivers and NICs don't handle this properly resulting in an interface reset or worse. This issue was introduced by the removal of an unconditional skb pull in the tx path to improve performance. Fix this without reintroducing the pull by setting up grant copy ops for as many slots as needed to reach the XEN_NETBACK_TX_COPY_LEN size. Adjust the rest of the code to handle multiple copy operations per skb. This is XSA-423 / CVE-2022-3643. Fixes: 7e5d7753 ("xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path") Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Paul Durrant <paul@xen.org> Signed-off-by:
-
- 05 Dec, 2022 3 commits
-
-
Linus Torvalds authored
proc_skip_spaces() seems to think it is working on C strings, and ends up being just a wrapper around skip_spaces() with a really odd calling convention. Instead of basing it on skip_spaces(), it should have looked more like proc_skip_char(), which really is the exact same function (except it skips a particular character, rather than whitespace). So use that as inspiration, odd coding and all. Now the calling convention actually makes sense and works for the intended purpose. Reported-and-tested-by:
Kyle Zeng <zengyhkyle@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Linus Torvalds authored
proc_get_long() is passed a size_t, but then assigns it to an 'int' variable for the length. Let's not do that, even if our IO paths are limited to MAX_RW_COUNT (exactly because of these kinds of type errors). So do the proper test in the rigth type. Reported-by:
-
Jann Horn authored
When __do_semtimedop() goes to sleep because it has to wait for a semaphore value becoming zero or becoming bigger than some threshold, it links the on-stack sem_queue to the sem_array, then goes to sleep without holding a reference on the sem_array. When __do_semtimedop() comes back out of sleep, one of two things must happen: a) We prove that the on-stack sem_queue has been disconnected from the (possibly freed) sem_array, making it safe to return from the stack frame that the sem_queue exists in. b) We stabilize our reference to the sem_array, lock the sem_array, and detach the sem_queue from the sem_array ourselves. sem_array has RCU lifetime, so for case (b), the reference can be stabilized inside an RCU read-side critical section by locklessly checking whether the sem_queue is still connected to the sem_array. However, the current code does the lockless check on sem_queue before starting an RCU read-side critical section, so the result of the lockless check immediately becomes useless. Fix it by doing rcu_read_lock() before the lockless check. Now RCU ensures that if we observe the object being on our queue, the object can't be freed until rcu_read_unlock(). This bug is only hittable on kernel builds with full preemption support (either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full). Fixes: 370b262c ("ipc/sem: avoid idr tree lookup for interrupted semop") Cc: stable@vger.kernel.org Signed-off-by:Jann Horn <jannh@google.com> Signed-off-by:
-
- 04 Dec, 2022 7 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit f35b5d7d. It has been reported to cause huge performance regressions on some loads (will-it-scale.per_process_ops, but also building the kernel with clang). The commit did speed up gcc builds by a small amount, so it's not an unambiguous regression, but until the big regressions are understood, let's revert it. Reported-by:
kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/r/202210181535.7144dd15-yujie.liu@intel.comReported-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/lkml/Y1DNQaoPWxE%2BrGce@dev-arch.thelio-3990X/ Cc: Huang, Ying <ying.huang@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by:
-
Jan Dabros authored
Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. Signed-off-by:
Jan Dabros <jsd@semihalf.com> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Tested-by:
Jason A. Donenfeld <Jason@zx2c4.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Borislav Petkov: - Fix a use-after-free case where the perf pending task callback would see an already freed event * tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_pending_task() UaF
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Revert a fix to RISC-V timers supposed to address an uncertainty whether clock events are received during S3 or not which locks up other RISC-V platforms. The issue will be fixed differently later. * tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix oops in 32-bit BPF tail call tests - Add missing declaration for machine_check_early_boot() Thanks to Christophe Leroy and Naveen N. Rao. * tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Add missing declaration for machine_check_early_boot() powerpc/bpf/32: Fix Oops on tail call tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: - a fix for Raydium touchscreen driver to stop leaking memory when sending commands to the chip * tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()
-
- 03 Dec, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A power state fix in the core for ACPI devices, a regression fix regarding bus recovery for the cadence driver, a DMA handling fix for the imx driver, and two error path fixes (npcm7xx and qcom-geni)" * tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer i2c: cadence: Fix regression with bus recovery i2c: Restore initial power state if probe fails i2c: npcm7xx: Fix error handling in npcm_i2c_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull dax fixes from Dan Williams: "A few bug fixes around the handling of "Soft Reserved" memory and memory tiering information. Linux is starting to enounter more real world systems that deploy an ACPI HMAT to describe different performance classes of memory, as well the "special purpose" (Linux "Soft Reserved") designation from EFI. These fixes result from that testing. It has all appeared in -next for a while with no known issues. - Fix duplicate overlapping device-dax instances for HMAT described "Soft Reserved" Memory - Fix missing node targets in the sysfs representation of memory tiers - Remove a confusing variable initialization" * tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: Fix duplicate 'hmem' device registration ACPI: HMAT: Fix initiator registration for single-initiator systems ACPI: HMAT: remove unnecessary variable initialization -
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just a small NVMe merge for this week, fixing protection of the name space list, and a missing clear of a reserved field when unused" * tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux: nvme: fix SRCU protection of nvme_ns_head list nvme-pci: clear the prp2 field when not used
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Three driver fixes. The Intel fix looks like the most important. - Fix a potential divide by zero in pinctrl-singe (OMAP and HiSilicon) - Disable IRQs on startup in the Mediatek driver. This is a classic, we should be looking out for this more. - Save and restore pins in 'direct IRQ' mode in the Intel driver, this works around firmware bugs" * tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: intel: Save and restore pins in "direct IRQ" mode pinctrl: meditatek: Startup with the IRQs disabled pinctrl: single: Fix potential division by zero -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - build fix for the NR_CPUS Kconfig SBI version dependency - fixes to early memory initialization, to fix page permissions in EFI and post-initmem-free - build fix for the VDSO, to avoid trying to profile the VDSO functions - fixes for kexec crash handling, to fix multi-core and interrupt related initialization inside the crash kernel - fix for a race condition when handling multiple concurrect kernel stack overflows * tag 'riscv-for-linus-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: kexec: Fixup crash_smp_send_stop without multi cores riscv: kexec: Fixup irq controller broken in kexec crash path riscv: mm: Proper page permissions after initmem free riscv: vdso: fix section overlapping under some conditions riscv: fix race when vmap stack overflow riscv: Sync efi page table's kernel mappings before switching riscv: Fix NR_CPUS range conditions
-
- 02 Dec, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix ambiguous TRIM and DISCARD args - Fix removal of debugfs file for mmc_test MMC host: - mtk-sd: Add missing clk_disable_unprepare() in an error path - sdhci: Fix I/O voltage switch delay for UHS-I SD cards - sdhci-esdhc-imx: Fix CQHCI exit halt state check - sdhci-sprd: Fix voltage switch" * tag 'mmc-v6.1-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-sprd: Fix no reset data and command after voltage switch mmc: sdhci: Fix voltage switch delay mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse() mmc: mmc_test: Fix removal of debugfs file mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check mmc: core: Fix ambiguous TRIM and DISCARD arg
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "Intel VT-d fixes: - IO/TLB flush fix - Various pci_dev refcount fixes" * tag 'iommu-fixes-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init() iommu/vt-d: Fix PCI device refcount leak in has_external_pci() iommu/vt-d: Fix PCI device refcount leak in prq_event_thread() iommu/vt-d: Add a fix for devices need extra dtlb flush
-
Pawan Gupta authored
The "force" argument to write_spec_ctrl_current() is currently ambiguous as it does not guarantee the MSR write. This is due to the optimization that writes to the MSR happen only when the new value differs from the cached value. This is fine in most cases, but breaks for S3 resume when the cached MSR value gets out of sync with the hardware MSR value due to S3 resetting it. When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write is skipped. Which results in SPEC_CTRL mitigations not getting restored. Move the MSR write from write_spec_ctrl_current() to a new function that unconditionally writes to the MSR. Update the callers accordingly and rename functions. [ bp: Rework a bit. ] Fixes: caa0ff24 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value") Suggested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.comSigned-off-by:
-
