- 11 Feb, 2020 40 commits
-
-
Tudor Ambarus authored
commit 781a08d9 upstream. 32 bit counter is not supported by neither of our AES IPs, all implement a 16 bit block counter. Drop the 32 bit block counter logic. Fixes: fcac8365 ("crypto: atmel-aes - fix the counter overflow in CTR mode") Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Herbert Xu authored
commit e8d99826 upstream. We should not be modifying the original request's MAY_SLEEP flag upon completion. It makes no sense to do so anyway. Reported-by:
Eric Biggers <ebiggers@kernel.org> Fixes: 5068c7a8 ("crypto: pcrypt - Add pcrypt crypto...") Signed-off-by:
-
Ard Biesheuvel authored
commit 11548f5a upstream. AMD Seattle incorporates a non-PCI version of the v3 CCP crypto accelerator, and this version was left behind when the maximum RSA modulus size was parameterized in order to support v5 hardware which supports larger moduli than v3 hardware does. Due to this oversight, RSA acceleration no longer works at all on these systems. Fix this by setting the .rsamax property to the appropriate value for v3 platform hardware. Fixes: e28c190d ("csrypto: ccp - Expand RSA support for a v5 ccp") Cc: Gary R Hook <gary.hook@amd.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Acked-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
commit b2e5e93a upstream. The 'clean' rule in the samples/bpf Makefile tries to remove backup files (ending in ~). However, if no such files exist, it will instead try to remove the user's home directory. While the attempt is mostly harmless, it does lead to a somewhat scary warning like this: rm: cannot remove '~': Is a directory Fix this by using find instead of shell expansion to locate any actual backup files that need to be removed. Fixes: b62a796c ("samples/bpf: allow make to be run from samples/bpf/ directory") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/157952560126.1683545.7273054725976032511.stgit@toke.dkSigned-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit 54a16ff6 ] As function_graph tracer can run when RCU is not "watching", it can not be protected by synchronize_rcu() it requires running a task on each CPU before it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used. Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72 Cc: stable@vger.kernel.org Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables") Reported-by:
"Paul E. McKenney" <paulmck@kernel.org> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Steven Rostedt (VMware) authored
[ Upstream commit 16052dd5 ] Because the function graph tracer can execute in sections where RCU is not "watching", the rcu_dereference_sched() for the has needs to be open coded. This is fine because the RCU "flavor" of the ftrace hash is protected by its own RCU handling (it does its own little synchronization on every CPU and does not rely on RCU sched). Acked-by:
-
Amol Grover authored
[ Upstream commit fd0e6852 ] Fix following instances of sparse error kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison Use rcu_dereference_protected to dereference the newly annotated pointer. Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.comSigned-off-by:
Amol Grover <frextrite@gmail.com> Signed-off-by:
-
Amol Grover authored
[ Upstream commit 24a9729f ] Fix following instances of sparse error kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison Use rcu_dereference_protected to access the __rcu annotated pointer. Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.comReviewed-by:
-
Herbert Xu authored
[ Upstream commit 07928d9b ] The function padata_flush_queues is fundamentally broken because it cannot force padata users to complete the request that is underway. IOW padata has to passively wait for the completion of any outstanding work. As it stands flushing is used in two places. Its use in padata_stop is simply unnecessary because nothing depends on the queues to be flushed afterwards. The other use in padata_replace is more substantial as we depend on it to free the old pd structure. This patch instead uses the pd->refcnt to dynamically free the pd structure once all requests are complete. Fixes: 2b73b07a ("padata: Flush the padata queues actively") Cc: <stable@vger.kernel.org> Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by:
-
Mikulas Patocka authored
commit aa950920 upstream. When committing state, the function writecache_flush does the following: 1. write metadata (writecache_commit_flushed) 2. flush disk cache (writecache_commit_flushed) 3. wait for data writes to complete (writecache_wait_for_ios) 4. increase superblock seq_count 5. write the superblock 6. flush disk cache It may happen that at step 3, when we wait for some write to finish, the disk may report the write as finished, but the write only hit the disk cache and it is not yet stored in persistent storage. At step 5 we write the superblock - it may happen that the superblock is written before the write that we waited for in step 3. If the machine crashes, it may result in incorrect data being returned after reboot. In order to fix the bug, we must swap steps 2 and 3 in the above sequence, so that we first wait for writes to complete and then flush the disk cache. Fixes: 48debafe ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 47ace7e0 upstream. Move blk_queue_make_request() to dm.c:alloc_dev() so that q->make_request_fn is never NULL during the lifetime of a DM device (even one that is created without a DM table). Otherwise generic_make_request() will crash simply by doing: dmsetup create -n test mount /dev/dm-N /mnt While at it, move ->congested_data initialization out of dm.c:alloc_dev() and into the bio-based specific init method. Reported-by:
Stefan Bader <stefan.bader@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1860231 Fixes: ff36ab34 ("dm: remove request-based logic from make_request_fn wrapper") Depends-on: c12c9a3c ("dm: various cleanups to md->queue initialization code") Cc: stable@vger.kernel.org Signed-off-by:
-
Milan Broz authored
commit 4ea9471f upstream. If benbi IV is used in AEAD construction, for example: cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256 the constructor uses wrong skcipher function and crashes: BUG: kernel NULL pointer dereference, address: 00000014 ... EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt] Call Trace: ? crypt_subkey_size+0x20/0x20 [dm_crypt] crypt_ctr+0x567/0xfc0 [dm_crypt] dm_table_add_target+0x15f/0x340 [dm_mod] Fix this by properly using crypt_aead_blocksize() in this case. Fixes: ef43aa38 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # v4.12+ Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051Reported-by:
Jerad Simpson <jbsimpson@gmail.com> Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
-
Joe Thornber authored
commit 4feaef83 upstream. The space-maps track the reference counts for disk blocks allocated by both the thin-provisioning and cache targets. There are variants for tracking metadata blocks and data blocks. Transactionality is implemented by never touching blocks from the previous transaction, so we can rollback in the event of a crash. When allocating a new block we need to ensure the block is free (has reference count of 0) in both the current and previous transaction. Prior to this fix we were doing this by searching for a free block in the previous transaction, and relying on a 'begin' counter to track where the last allocation in the current transaction was. This 'begin' field was not being updated in all code paths (eg, increment of a data block reference count due to breaking sharing of a neighbour block in the same btree leaf). This fix keeps the 'begin' field, but now it's just a hint to speed up the search. Instead the current transaction is searched for a free block, and then the old transaction is double checked to ensure it's free. Much simpler. This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when DM thin-provisioning's snapshots are heavily used. Reported-by:
Eric Wheeler <dm-devel@lists.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Dmitry Fomichev authored
commit b3996295 upstream. dm-zoned is observed to log failed kernel assertions and not work correctly when operating against a device with a zone size smaller than 128MiB (e.g. 32768 bits per 4K block). The reason is that the bitmap size per zone is calculated as zero with such a small zone size. Fix this problem and also make the code related to zone bitmap management be able to handle per zone bitmaps smaller than a single block. A dm-zoned-tools patch is required to properly format dm-zoned devices with zone sizes smaller than 128MiB. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Michael Ellerman authored
commit dabf6b36 upstream. There's an OF helper called of_dma_is_coherent(), which checks if a device has a "dma-coherent" property to see if the device is coherent for DMA. But on some platforms devices are coherent by default, and on some platforms it's not possible to update existing device trees to add the "dma-coherent" property. So add a Kconfig symbol to allow arch code to tell of_dma_is_coherent() that devices are coherent by default, regardless of the presence of the property. Select that symbol on powerpc when NOT_COHERENT_CACHE is not set, ie. when the system has a coherent cache. Fixes: 92ea637e ("of: introduce of_dma_is_coherent() helper") Cc: stable@vger.kernel.org # v3.16+ Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 0552e05f upstream. If a device is deleted by one of its system-wide resume callbacks (for example, because it does not appear to be present or accessible any more) along with its children, the resume of the children may continue leading to use-after-free errors and other issues (potentially). Namely, if the device's children are resumed asynchronously, their resume may have been scheduled already before the device's callback runs and so the device may be deleted while dpm_wait_for_superior() is being executed for them. The memory taken up by the parent device object may be freed then while dpm_wait() is waiting for the parent's resume callback to complete, which leads to a use-after-free. Moreover, the resume of the children is really not expected to continue after they have been unregistered, so it must be terminated right away in that case. To address this problem, modify dpm_wait_for_superior() to check if the target device is still there in the system-wide PM list of devices and if so, to increment its parent's reference counter, both under dpm_list_mtx which prevents device_del() running for the child from dropping the parent's reference counter prematurely. If the device is not present in the system-wide PM list of devices any more, the resume of it cannot continue, so check that again after dpm_wait() returns, which means that the parent's callback has been completed, and pass the result of that check to the caller of dpm_wait_for_superior() to allow it to abort the device's resume if it is not there any more. Link: https://lore.kernel.org/linux-pm/1579568452-27253-1-git-send-email-chanho.min@lge.comReported-by:
Chanho Min <chanho.min@lge.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
-
Chengguang Xu authored
commit bf2cbd3c upstream. Calling min_not_zero() to simplify complicated prjquota limit comparison in f2fs_statfs_project(). Signed-off-by:
Chengguang Xu <cgxu519@mykernel.net> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chengguang Xu authored
commit acdf2172 upstream. statfs calculates Total/Used/Avail disk space in block unit, so we should translate soft/hard prjquota limit to block unit as well. Below testing result shows the block/inode numbers of Total/Used/Avail from df command are all correct afer applying this patch. [root@localhost quota-tools]\# ./repquota -P /dev/sdb1
-
Chengguang Xu authored
commit 909110c0 upstream. Setting softlimit larger than hardlimit seems meaningless for disk quota but currently it is allowed. In this case, there may be a bit of comfusion for users when they run df comamnd to directory which has project quota. For example, we set 20M softlimit and 10M hardlimit of block usage limit for project quota of test_dir(project id 123). [root@hades f2fs]# repquota -P -a
-
Amir Goldstein authored
commit 4c37e71b upstream. The WARN_ON() that child entry is always on overlay st_dev became wrong when we allowed this function to update d_ino in non-samefs setup with xino enabled. It is not true in case of xino bits overflow on a non-dir inode. Leave the WARN_ON() only for directories, where assertion is still true. Fixes: adbf4f7e ("ovl: consistent d_ino for non-samefs with xino") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Sven Van Asbroeck authored
commit a60ec78d upstream. This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This could mean that the work function is still running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that that the work is properly cancelled, no longer running, and unable to re-schedule itself. This issue was detected with the help of Coccinelle. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Quinn Tran authored
commit 641e0efd upstream. MTCP dump failed due to MB Reg 10 was picking garbage data from stack memory. Fixes: 81178772 ("[SCSI] qla2xxx: Implemetation of mctp.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217220617.28084-14-hmadhani@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 1630146d upstream. scripts/find-unused-docs.sh invokes scripts/kernel-doc to find out if a source file contains kerneldoc or not. However, as it passes the no longer supported "-text" option to scripts/kernel-doc, the latter prints out its help text, causing all files to be considered containing kerneldoc. Get rid of these false positives by removing the no longer supported "-text" option from the scripts/kernel-doc invocation. Cc: stable@vger.kernel.org # 4.16+ Fixes: b0514267 ("scripts: kernel-doc: get rid of unused output formats") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200127093107.26401-1-geert+renesas@glider.beSigned-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Gilad Ben-Yossef authored
commit 15fd2566 upstream. The PM code was racy, possibly causing the driver to submit requests to a powered down device. Fix the race and while at it simplify the PM code. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Fixes: 1358c13a ("crypto: ccree - fix resume race condition on init") Cc: stable@kernel.org # v4.20 Signed-off-by:
-
Gilad Ben-Yossef authored
commit cedca59f upstream. pm_runtime_get_sync() can return 1 as a valid (none error) return code. Treat it as such. Signed-off-by:
-
Gilad Ben-Yossef authored
commit 4df2ef25 upstream. Fix brown paper bag bug of not releasing backlog list item buffer when backlog was consumed causing a memory leak when backlog is used. Signed-off-by:
-
Herbert Xu authored
commit 7db3b61b upstream. We need to check whether spawn->alg is NULL under lock as otherwise the algorithm could be removed from under us after we have checked it and found it to be non-NULL. This could cause us to remove the spawn from a non-existent list. Fixes: 7ede5a5b ("crypto: api - Fix crypto_drop_spawn crash...") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Samuel Holland authored
commit dc91c3b6 upstream. On AXP288 and newer PMICs, bit 7 of AXP20X_VBUS_IPSOUT_MGMT can be set to prevent using the VBUS input. However, when the VBUS unplugged and plugged back in, the bit automatically resets to zero. We need to set the register as volatile to prevent regmap from caching that bit. Otherwise, regcache will think the bit is already set and not write the register. Fixes: cd532166 ("mfd: axp20x: Fix axp288 volatile ranges") Cc: stable@vger.kernel.org Signed-off-by:
Samuel Holland <samuel@sholland.org> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Tianyu Lan authored
commit d33c240d upstream. Current code has assumption that balloon request memory size aligns with 2MB. But actually Hyper-V doesn't guarantee such alignment. When balloon driver receives non-aligned balloon request, it produces warning and balloon up more memory than requested in order to keep 2MB alignment. Remove the warning and balloon up memory according to actual requested memory size. Fixes: f6712238 ("hv: hv_balloon: avoid memory leak on alloc_error of 2MB memory block") Cc: stable@vger.kernel.org Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Tianyu Lan <Tianyu.Lan@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Michał Mirosław authored
[ Upstream commit a04184ce ] sdhci_alloc_host() does its work not using managed infrastructure, so needs explicit free on error path. Add it where needed. Cc: <stable@vger.kernel.org> Fixes: bb5f8ea4 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/b2a44d5be2e06ff075f32477e466598bb0f07b36.1577961679.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Yurii Monakov authored
[ Upstream commit 6df19872 ] ks_pcie_stop_link() function does not clear LTSSM_EN_VAL bit so link training was not triggered more than once after startup. In configurations where link can be unstable during early boot, for example, under low temperature, it will never be established. Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver") Signed-off-by:
Yurii Monakov <monakov.y@gmail.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Andrew Murray <andrew.murray@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 4549f7e5 upstream. The geode AES driver is heavily broken because it stores per-request state in the transform context. So it will crash or produce the wrong result if used by any of the many places in the kernel that issue concurrent requests for the same transform object. This driver is also implemented using the deprecated blkcipher API, which makes it difficult to fix, and puts it among the drivers preventing that API from being removed. Convert this driver to use the skcipher API, and change it to not store per-request state in the transform context. Fixes: 9fe757b0 ("[PATCH] crypto: Add support for the Geode LX AES hardware") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Florian Bezdeka <florian@bezdeka.de> Signed-off-by:
-
Zhihao Cheng authored
commit f5de5b83 upstream. In ubifs, concurrent execution of writepage and bulk read on the same file may cause ABBA deadlock, for example (Reproduce method see Link): Process A(Bulk-read starts from page4) Process B(write page4 back) vfs_read wb_workfn or fsync ... ... generic_file_buffered_read write_cache_pages ubifs_readpage LOCK(page4) ubifs_bulk_read ubifs_writepage LOCK(ui->ui_mutex) ubifs_write_inode ubifs_do_bulk_read LOCK(ui->ui_mutex) find_or_create_page(alloc page4) ↑ LOCK(page4) <-- ABBA deadlock occurs! In order to ensure the serialization execution of bulk read, we can't remove the big lock 'ui->ui_mutex' in ubifs_bulk_read(). Instead, we allow ubifs_do_bulk_read() to lock page failed by replacing find_or_create_page(FGP_LOCK) with pagecache_get_page(FGP_LOCK | FGP_NOWAIT). Signed-off-by:
Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by:
zhangyi (F) <yi.zhang@huawei.com> Cc: <Stable@vger.kernel.org> Fixes: 4793e7c5 ("UBIFS: add bulk-read facility") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206153Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Eric Biggers authored
commit 2b57067a upstream. UBIFS's implementation of FS_IOC_SETFLAGS fails to preserve existing inode flags that aren't settable by FS_IOC_SETFLAGS, namely the encrypt flag. This causes the encrypt flag to be unexpectedly cleared. Fix it by preserving existing unsettable flags, like ext4 and f2fs do. Test case with kvm-xfstests shell: FSTYP=ubifs KEYCTL_PROG=keyctl . fs/ubifs/config . ~/xfstests/common/encrypt dev=$(__blkdev_to_ubi_volume /dev/vdc) ubiupdatevol -t $dev mount $dev /mnt -t ubifs k=$(_generate_session_encryption_key) mkdir /mnt/edir xfs_io -c "set_encpolicy $k" /mnt/edir echo contents > /mnt/edir/file chattr +i /mnt/edir/file chattr -i /mnt/edir/file With the bug, the following errors occur on the last command: [ 18.081559] fscrypt (ubifs, inode 67): Inconsistent encryption context (parent directory: 65) chattr: Operation not permitted while reading flags on /mnt/edir/file Fixes: d475a507 ("ubifs: Add skeleton for fscrypto") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
-
Eric Biggers authored
commit f0d07a98 upstream. If userspace provides an invalid fscrypt no-key filename which encodes a hash value with any of the UBIFS node type bits set (i.e. the high 3 bits), gracefully report ENOENT rather than triggering ubifs_assert(). Test case with kvm-xfstests shell: . fs/ubifs/config . ~/xfstests/common/encrypt dev=$(__blkdev_to_ubi_volume /dev/vdc) ubiupdatevol $dev -t mount $dev /mnt -t ubifs mkdir /mnt/edir xfs_io -c set_encpolicy /mnt/edir rm /mnt/edir/_,,,,,DAAAAAAAAAAAAAAAAAAAAAAAAAA With the bug, the following assertion fails on the 'rm' command: [ 19.066048] UBIFS error (ubi0:0 pid 379): ubifs_assert_failed: UBIFS assert failed: !(hash & ~UBIFS_S_KEY_HASH_MASK), in fs/ubifs/key.h:170 Fixes: f4f61d2c ("ubifs: Implement encrypted filenames") Cc: <stable@vger.kernel.org> # v4.10+ Link: https://lore.kernel.org/r/20200120223201.241390-5-ebiggers@kernel.orgSigned-off-by:
-
Hou Tao authored
commit 2fe8b2d5 upstream. Reject unsupported ioctl flags explicitly, so the following command on a regular ubifs file will fail: chattr +d ubifs_file And xfstests generic/424 will pass. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Stephen Boyd authored
commit 6b6d188a upstream. The alarmtimer_rtc_add_device() function creates a wakeup source and then tries to grab a module reference. If that fails the function returns early with an error code, but fails to remove the wakeup source. Cleanup this exit path so there is no dangling wakeup source, which is named 'alarmtime' left allocated which will conflict with another RTC device that may be registered later. Fixes: 51218298 ("alarmtimer: Ensure RTC module is not unloaded") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200109155910.907-2-swboyd@chromium.orgSigned-off-by:
-
Hans de Goede authored
commit ff3154d1 upstream. Commit b41901a2 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") added support for some (broken) devices which always report 0 for both design_capacity and full_charge_capacity. Since the device that commit was written as a fix for is not reporting any form of "full" capacity we cannot calculate the value for the POWER_SUPPLY_PROP_CAPACITY, this is worked around by using an alternative array of available properties which does not contain this property. This is necessary because userspace (upower) treats us returning -ENODEV as 0 and then typically will trigger an emergency shutdown because of that. Userspace does not do this if the capacity sysfs attribute is not present at all. There are two potential problems with that commit: 1) It assumes that both full_charge- and design-capacity are broken at the same time and only checks if full_charge- is broken. 2) It assumes that this only ever happens for devices which report energy units rather then charge units. This commit fixes both issues by only using the alternative array of available properties if both full_charge- and design-capacity are broken and by also adding an alternative array of available properties for devices using mA units. Fixes: b41901a2 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") Cc: 4.19+ <stable@vger.kernel.org> # 4.19+ Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit 5b74d1d1 upstream. The ThunderSoft TS178 tablet's _BIX implementation reports design_capacity but not full_charge_capacity. Before this commit this would cause us to return -ENODEV for the capacity attribute, which userspace does not like. Specifically upower does this: if (sysfs_file_exists (native_path, "capacity")) { percentage = sysfs_get_double (native_path, "capacity"); Where the sysfs_get_double() helper returns 0 when we return -ENODEV, so the battery always reads 0% if we return -ENODEV. This commit fixes this by using the design-capacity instead of the full-charge-capacity when the full-charge-capacity is not available. Fixes: b41901a2 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") Cc: 4.19+ <stable@vger.kernel.org> # 4.19+ Signed-off-by:
-
Hans de Goede authored
commit cc99f0ad upstream. Commit b41901a2 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") added support for some (broken) devices which always report 0 for both design- and full_charge-capacity. This assumes that if the capacity is not being reported it is 0. The ThunderSoft TS178 tablet's _BIX implementation falsifies this assumption. It reports ACPI_BATTERY_VALUE_UNKNOWN (-1) as full_charge_capacity, which we treat as a valid value which causes several problems. This commit fixes this by adding a new ACPI_BATTERY_CAPACITY_VALID() helper which checks that the value is not 0 and not -1; and using this whenever we need to test if either design_capacity or full_charge_capacity is valid. Fixes: b41901a2 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") Cc: 4.19+ <stable@vger.kernel.org> # 4.19+ Signed-off-by:
-
