- 27 Jan, 2020 40 commits
-
-
Chen-Yu Tsai authored
[ Upstream commit d0275214 ] The NAND controller device node was inserted into the wrong position, probably due to a rebase or merge, as the file's structure does not provide enough context for git to accurately match the previous device node block. Fixes: d7b843df ("ARM: dts: sun8i: add NAND controller node for A23/A33") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Huazhong Tan authored
[ Upstream commit 8be73621 ] The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 849e4607 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
YueHaibing authored
[ Upstream commit e902cdcb ] In pch_spi_handle_dma, it doesn't check for NULL returns of kcalloc so it would result in an Oops. Fixes: c37f3c27 ("spi/topcliff_pch: DMA support") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Eric Wong authored
[ Upstream commit 2a4daadd ] Older versions of Libreboot and Coreboot had an invalid value (`3' in my case) in the century byte affecting the GM45 in the Thinkpad X200. Not everybody's updated their firmwares, and Linux <= 4.2 was able to read the RTC without problems, so workaround this by ignoring invalid values. Fixes: 3c217e51 ("rtc: cmos: century support") Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sylvain Chouleur <sylvain.chouleur@intel.com> Cc: Patrick McDermott <patrick.mcdermott@libiquity.com> Cc: linux-rtc@vger.kernel.org Signed-off-by:
Eric Wong <e@80x24.org> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Maor Gottlieb authored
[ Upstream commit 6113cc44 ] Two flow specifications can set the ip protocol field in the flow table entry: 1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly. 2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users who want to receive specific L4 packets. We need to avoid overriding of the ip_protocol with zeros, in case that the user first put the L4 specification and only then the L3. Fixes: ca0d4753 ('IB/mlx5: Add support in TOS and protocol to flow steering') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Jacopo Mondi authored
[ Upstream commit 341fe1d3 ] As the tw9910 subdevice is registered through the v4l2-async framework, use the v4l2-async provided function to register it. Fixes: 7b20f325 ("media: i2c: tw9910: Remove soc_camera dependencies") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit c3b9c50d ] The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 482d2e9c ("net: hns3: add support to query tqps number") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Israel Rukshin authored
[ Upstream commit 57b26497 ] ib_dma_map_sg() augments the SGL into a 'dma mapped SGL'. This process may change the number of entries and the lengths of each entry. Code that touches dma_address is iterating over the 'dma mapped SGL' and must use dma_nents which returned from ib_dma_map_sg(). ib_sg_to_pages() and ib_map_mr_sg() are using dma_address so they must use dma_nents. Fixes: 39405885 ("IB/iser: Port to new fast registration API") Fixes: bfe066e2 ("IB/iser: Reuse ib_sg_to_pages") Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Stefan Agner authored
[ Upstream commit d9866572 ] Make sure to properly put the of node in case finding the codec fails. Fixes: 81e8e492 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000") Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit f990f7fb ] Fix an unaligned memory access in tgr192_transform() by using the unaligned access helpers. Fixes: 06ace7a9 ("[CRYPTO] Use standard byte order macros wherever possible") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 707d0cf8 ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/bcm/cipher.c: In function 'handle_ahash_req': drivers/crypto/bcm/cipher.c:720:15: warning: variable 'chunk_start' set but not used [-Wunused-but-set-variable] drivers/crypto/bcm/cipher.c: In function 'spu_rx_callback': drivers/crypto/bcm/cipher.c:1679:31: warning: variable 'areq' set but not used [-Wunused-but-set-variable] drivers/crypto/bcm/cipher.c:1678:22: warning: variable 'ctx' set but not used [-Wunused-but-set-variable] Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit e00d8880 ] Commit c3ff2a51 ("powerpc/32: add stack protector support") caused kernel panic on PowerPC when an external module is used with CONFIG_STACKPROTECTOR because the 'prepare' target was not executed for the external module build. Commit e07db28e ("kbuild: fix single target build for external module") turned it into a build error because the 'prepare' target is now executed but the 'prepare0' target is missing for the external module build. External module on arm/arm64 with CONFIG_STACKPROTECTOR_PER_TASK is also broken in the same way. Move 'PHONY += prepare0' to the common place. GNU Make is fine with missing rule for phony targets. I also removed the comment which is wrong irrespective of this commit. I minimize the change so it can be easily backported to 4.20.x To fix v4.20, please backport e07db28e ("kbuild: fix single target build for external module"), and then this commit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201891 Fixes: e07db28e ("kbuild: fix single target build for external module") Fixes: c3ff2a51 ("powerpc/32: add stack protector support") Fixes: 189af465 ("ARM: smp: add support for per-task stack canaries") Fixes: 0a1213fa ("arm64: enable per-task stack canaries") Cc: linux-stable <stable@vger.kernel.org> # v4.20 Reported-by:
Samuel Holland <samuel@sholland.org> Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
-
Pawe? Chmiel authored
[ Upstream commit 19c624c6 ] This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test. Previously it was complaining that step was bigger than difference between max and min. Fixes: 15f4bc3b ("[media] s5p-jpeg: Add JPEG controls support") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f8261c37 ] The etnaviv_gem_get_pages() never returns NULL. It returns error pointers on error. Fixes: a8c21a54 ("drm/etnaviv: add initial etnaviv DRM driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit be4dbdec ] This fixes irrelevant "tegra-mc 7000f000.memory-controller: no memory timings for RAM code 0 registered" warning message during of kernels boot-up on Tegra20. Fixes: a8d502fd ("memory: tegra: Squash tegra20-mc into common tegra-mc driver") Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 1d16073a ] So far genphy_soft_reset was used automatically if the PHY driver didn't implement the soft_reset callback. This changed with the mentioned commit and broke KSZ9031. To fix this configure the KSZ9031 PHY driver to use genphy_soft_reset. Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset") Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Tested-by:
Sekhar Nori <nsekhar@ti.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Raju Rangoju authored
[ Upstream commit 3352976c ] The patch 944661dd: "RDMA/iw_cxgb4: atomically lookup ep and get a reference" from May 6, 2016, leads to the following Smatch complaint: drivers/infiniband/hw/cxgb4/cm.c:2953 terminate() error: we previously assumed 'ep' could be null (see line 2945) Fixes: 944661dd ("RDMA/iw_cxgb4: atomically lookup ep and get a reference") Reported-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 734882a8 ] Currently the driver calls pm_runtime_put_autosuspend but without ever having done a pm_runtime_get, this causes the reference count in the pm runtime core to become -1. The bad reference count causes the core to sometimes suspend whilst an active SPI transfer is in progress. arizona spi0.1: SPI transfer timed out spi_master spi0: failed to transfer one message from queue The correct proceedure is to do all the initialisation that requires the hardware to be powered up before enabling the PM runtime, then enable the PM runtime having called pm_runtime_set_active to inform it that the hardware is currently powered up. The core will then power it down at it's leisure and no explicit pm_runtime_put is required. Fixes: d36ccd9f ("spi: cadence: Runtime pm adaptation") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Loic Poulain authored
[ Upstream commit af61bef5 ] In the same way as for msm8974-hammerhead, l11 load, used for SDCARD VMMC, needs to be increased in order to prevent any voltage drop issues (due to limited current) happening with some SDCARDS or during specific operations (e.g. write). Tested on Dragonboard-410c and DART-SD410 boards. Fixes: 4c7d53d1 (arm64: dts: apq8016-sbc: add regulators support) Reported-by:
Manabu Igusa <migusa@arrowjapan.com> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 06c3bbd3 ] In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 8f1597c8 ("drm: shmobile: Perform initialization/cleanup at probe/remove time") Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit dbe30dae ] The pkey table size is QEDR_ROCE_PKEY_TABLE_LEN, index should be tested for >= QEDR_ROCE_PKEY_TABLE_LEN instead of > QEDR_ROCE_PKEY_TABLE_LEN. Fixes: a7efd777 ("qedr: Add support for PD,PKEY and CQ verbs") Signed-off-by:
Gal Pressman <galpress@amazon.com> Acked-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit b1889407 ] The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 4959d5da ] The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: e3cf00d0 ("IB/usnic: Add Cisco VIC low-level hardware driver") Signed-off-by:
Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by:
-
Shakeel Butt authored
[ Upstream commit ba4a4574 ] Commit 5eed6f1d ("fork,memcg: fix crash in free_thread_stack on memcg charge fail") fixes a crash caused due to failed memcg charge of the kernel stack. However the fix misses the cached_stacks case which this patch fixes. So, the same crash can happen if the memcg charge of a cached stack is failed. Link: http://lkml.kernel.org/r/20190102180145.57406-1-shakeelb@google.com Fixes: 5eed6f1d ("fork,memcg: fix crash in free_thread_stack on memcg charge fail") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Rik van Riel <riel@surriel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Noralf Trønnes authored
[ Upstream commit 6e1490cf ] If register_framebuffer() fails during fbdev setup we will leak the framebuffer, the GEM buffer and the shadow buffer for defio. This is because drm_fb_helper_fbdev_setup() just calls drm_fb_helper_fini() on error not taking into account that register_framebuffer() can fail. Since the generic emulation uses DRM client for its framebuffer and backing buffer in addition to a shadow buffer, it's necessary to open code drm_fb_helper_fbdev_setup() to properly handle the error path. Error cleanup is removed from .fb_probe and is handled by one function for all paths. Fixes: 9060d7f4 ("drm/fb-helper: Finish the generic fbdev emulation") Reported-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190105181846.26495-1-noralf@tronnes.orgSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit f5fd9fd4 ] The ->nr_signal is the supposed to be the number of elements in the ->signal array. There was one place where it was 5 but it was supposed to be 4. That looks like a copy and paste bug. There were also two checks that were off by one. Fixes: 9e2c2e27 ("drm/etnaviv: add infrastructure to query perf counter") Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by:
-
Biju Das authored
[ Upstream commit 072b8175 ] The iic3 block on RZ/G1M does not support automatic transmission, unlike other R-Car SoC's. So dropping the compatibility with the generic version. Fixes: f523405f ("ARM: dts: r8a7743: Add IIC cores to dtsi") Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
YueHaibing authored
[ Upstream commit c39191fe ] 'ctx->handle' is unsigned, it never less than zero. This patch use int 'tmp_handle' to handle the err condition. Fixes: 62968144 ("drm: convert drm context code to use Linux idr") Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181229024907.12852-1-yuehaibing@huawei.comSigned-off-by:
-
Sibi Sankar authored
[ Upstream commit 47b87474 ] Add proxy vote for pll supply on MSM8996 SoC. Fixes: 9f058fa2 ("remoteproc: qcom: Add support for mss remoteproc on msm8996") Signed-off-by:
Sibi Sankar <sibis@codeaurora.org> Signed-off-by:
-
Sibi Sankar authored
[ Upstream commit 80ec419c ] Proxy vote for QDSS clock and remove vote on handover interrupt to provide MSS PBL with access to STM hardware registers during boot. Add "snoc_axi" and "mnoc_axi" to the active clock list. Rename "gpll0_mss_clk" to "gpll0_mss" for consistency across SoCs. Fixes: 9f058fa2 ("remoteproc: qcom: Add support for mss remoteproc on msm8996") Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 4d9226fd ] The bcm2835-thermal driver was added with commit ac178e42 ("ARM64: bcm2835: add thermal driver to default config"). Unfortunately this was accidentally dropped by commit eb1e6716 ("arm64: defconfig: sync with savedefconfig"). So enable the driver again. Fixes: eb1e6716 ("arm64: defconfig: sync with savedefconfig") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Jonas Gorski authored
[ Upstream commit 682fee80 ] Trying to register the DSP platform device results in a null pointer access: [ 0.124184] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804e305c, ra == 804e6f20 [ 0.135208] Oops[#1]: [ 0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87 ... [ 0.197117] epc : 804e305c bcm63xx_dsp_register+0x80/0xa4 [ 0.202838] ra : 804e6f20 board_register_devices+0x258/0x390 ... This happens because it tries to copy the passed platform data over the platform_device's unpopulated platform_data. Since this code has been broken since its submission, no driver was ever submitted for it, and apparently nobody was using it, just remove it instead of trying to fix it. Fixes: e7300d04 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Acked-by:
-
Yangtao Li authored
[ Upstream commit 8d726c51 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Reviewed-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 8f7fc545 ("clk: mvebu: dove: maintain clock init order") Fixes: 63b8d92c ("clk: add Dove PLL divider support for GPU, VMeta and AXI clocks") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 9b4eedf6 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit db20a90a ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit e7beeab9 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit a3c24050 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 56717702 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 5f8c183a ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 1731e14f ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
