- 30 Oct, 2023 4 commits
-
-
Tomasz Rusinowicz authored
Add new debugfs file to set dvfs_mode FW boot parameter and restart the FW to allow experimenting with DVFS (dynamic voltage & frequency scaling). Signed-off-by:
Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-4-stanislaw.gruszka@linux.intel.com
-
Stanislaw Gruszka authored
Cleanup drm_driver declaration leftover. Reviewed-by:
Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by:
-
Krystian Pradzynski authored
Bump boot API to 4.20 Bump JSM API to 3.15 Signed-off-by:
-
Arnd Bergmann authored
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc151 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- 27 Oct, 2023 10 commits
-
-
Sheng-Liang Pan authored
Add panel identification entry for - AUO B116XTN02 family (product ID:0x235c) - BOE NT116WHM-N21,836X2 (product ID:0x09c3) - BOE NV116WHM-N49 V8.0 (product ID:0x0979) Signed-off-by:
Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231027110435.1.Ia01fe9ec1c0953e0050a232eaa782fef2c037516@changeid
-
Pranjal Ramajor Asha Kanojiya authored
Use QAIC_TIMESYNC MHI channel to send UTC time to device in SBL environment. Remove support for QAIC_TIMESYNC MHI channel in AMSS environment as it is not used in that environment. Signed-off-by:
Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by:
Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by:
-
Ajit Pal Singh authored
Device and Host have a time synchronization mechanism that happens once during boot when device is in SBL mode. After that, in mission-mode there is no timesync. In an experiment after continuous operation, device time drifted w.r.t. host by approximately 3 seconds per day. This drift leads to mismatch in timestamp of device and Host logs. To correct this implement periodic timesync in driver. This timesync is carried out via QAIC_TIMESYNC_PERIODIC MHI channel. Signed-off-by:
Ajit Pal Singh <quic_ajitpals@quicinc.com> Signed-off-by:
-
Carl Vanderlip authored
Several virtualization use-cases either don't support 32 MultiMSIs (Xen/VMware) or have significant drawbacks to their use (KVM's vIOMMU, which is required to support 32 MSI, needs to allocate an alternate system memory space for each device using vIOMMU (e.g. 8GB VM mem and 2 cards => 8 + 2 * 8 = 24GB host memory required)). Support these cases by enabling a 1 MSI fallback mode. Whenever all 32 MSIs requested are not available, a second request for a single MSI is made. Its success is the initiator of single MSI mode. This mode causes all interrupts generated by the device to be directed to the 0th MSI (firmware >=v1.10 will do this as a response to the PCIe MSI capability configuration). Likewise, all interrupt handlers for the device are registered to the 0th MSI. Since the DBC interrupt handler checks if the DBC is in use or if there is any pending changes, the 'spurious' interrupts are disregarded. If there is work to be done, the standard threaded IRQ handler is dispatched. On every interrupt, the MHI handler wakes up its threaded interrupt handler, and attempts to wake any waiters for MHI state events. Performance is within +-0.6% for test cases that typify real world use. Larger differences ([-4,+132]%, avg +47%) exist for very simple tasks (e.g. addition) compiled for single NSPs. It is assumed that the small work and many interrupts typically cause contention (e.g. 16 NSPs vs 4 CPUs), as evidenced by the standard deviation between runs also decreasing (r=-0.48 between delta(Performace_test) and delta(StdDev_test/Avg_test)) Signed-off-by:
-
Simon Ser authored
This is already uAPI, xserver parses it. It's useful to document since user-space might want to lookup the parent connector. Additionally, people (me included) have misunderstood the PATH property for being stable across reboots, but since a KMS object ID is baked in there that's not the case. So PATH shouldn't be used as-is in config files and such. Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20231023203629.198109-1-contact@emersion.fr
-
Simon Ser authored
This new IOCTL allows callers to close a framebuffer without disabling planes or CRTCs. This takes inspiration from Rob Clark's unref_fb IOCTL [1] and DRM_MODE_FB_PERSIST [2]. User-space patch for wlroots available at [3]. IGT test available at [4]. v2: add an extra pad field just in case we want to extend this IOCTL in the future (Pekka, Sima). [1]: https://lore.kernel.org/dri-devel/20170509153654.23464-1-robdclark@gmail.com/ [2]: https://lore.kernel.org/dri-devel/20211006151921.312714-1-contact@emersion.fr/ [3]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4394 [4]: https://lists.freedesktop.org/archives/igt-dev/2023-October/063294.htmlSigned-off-by:
Daniel Stone <daniels@collabora.com> Acked-by:
-
Simon Ser authored
drm_mode_rmfb performs two operations: drop the FB from the file_priv->fbs list, and make sure the FB is no longer used on a plane. In the next commit an IOCTL which only does so former will be introduced, so let's split it into a separate function. No functional change, only refactoring. v2: no change Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020101926.145327-1-contact@emersion.fr
-
Kunwu Chan authored
There is a typo in the kernel documentation for function drm_atomic_helper_wait_for_dependencies. Fix it. Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027024459.12793-1-chentao@kylinos.cn
-
Javier Martinez Canillas authored
Avoid a possible uninitialized use of the crtc_state variable in function ssd132x_primary_plane_atomic_check() and avoid the following Smatch warn: drivers/gpu/drm/solomon/ssd130x.c:921 ssd132x_primary_plane_atomic_check() error: uninitialized symbol 'crtc_state'. Fixes: fdd591e0 ("drm/ssd130x: Add support for the SSD132x OLED controller family") Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/7dd6ca45-8263-44fe-a318-2fd9d761425d@moroto.mountain/Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020225338.1686974-1-javierm@redhat.com
-
Javier Martinez Canillas authored
This is a leftover from when the binding schema had the compatible string property enum as a 'oneOf' child and the '-' was not removed when 'oneOf' got dropped during the binding review process. Reported-by:
Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/dri-devel/CAL_Jsq+h8DcnpKqhokQOODCc8+Qi3M0PrxRFKz_Y4v37yMJvvA@mail.gmail.com/Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
- 26 Oct, 2023 18 commits
-
-
Alex Deucher authored
Rather than doing this in the IP code for the SDMA paging engine, move it up to the core device level init level. This should fix the scheduler init ordering. v2: drop extra parens v3: drop SDMA helpers v4: Added a Fixes tag because amdgpu dereferences an uninitialized scheduler without this patch, and this patch fixes this. (Luben) Tested-by:Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.comAcked-by:
Christian König <christian.koenig@amd.com> Fixes: 56e44960 ("drm/sched: Convert the GPU scheduler to variable number of run-queues") Signed-off-by:
Luben Tuikov <ltuikov89@gmail.com>
-
Luben Tuikov authored
Update the GPU Scheduler maintainer email. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: AMD Graphics <amd-gfx@lists.freedesktop.org> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Signed-off-by:
-
Luben Tuikov authored
The GPU scheduler has now a variable number of run-queues, which are set up at drm_sched_init() time. This way, each driver announces how many run-queues it requires (supports) per each GPU scheduler it creates. Note, that run-queues correspond to scheduler "priorities", thus if the number of run-queues is set to 1 at drm_sched_init(), then that scheduler supports a single run-queue, i.e. single "priority". If a driver further sets a single entity per run-queue, then this creates a 1-to-1 correspondence between a scheduler and a scheduled entity. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Emma Anholt <emma@anholt.net> Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Helen Koike authored
DRM CI keeps track of which tests are failing, flaking or being skipped by the ci in the expectations files. Add entries for those files to the corresponding driver maintainer, so they can be notified when they change. Signed-off-by:
Helen Koike <helen.koike@collabora.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230919182249.153499-1-helen.koike@collabora.comSigned-off-by:
Maxime Ripard <mripard@kernel.org>
-
Helen Koike authored
Clarify the procedure developer must follow to request privileges to run tests on Freedesktop gitlab CI. This measure was added to avoid untrusted people to misuse the infrastructure. Signed-off-by:
David Heidelberg <david.heidelberg@collabora.com> Link: https://lore.kernel.org/r/20231024004525.169002-11-helen.koike@collabora.comSigned-off-by:
-
Helen Koike authored
Since the kernel doesn't use a bot like Mesa that requires tests to pass in order to merge the patches, leave it to developers and/or maintainers to manually retry. Suggested-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Helen Koike authored
Export the resultant kernel config, making it easier to verify if the resultant config was correctly generated. Suggested-by:
-
Helen Koike authored
With the new sharding, the default job timeout is not enough for i915 and their jobs are failing before completing. See below the current execution time: 🞋 job i915:tgl 8/8 has new status: success (37m3s) 🞋 job i915:tgl 7/8 has new status: success (19m43s) 🞋 job i915:tgl 6/8 has new status: success (21m47s) 🞋 job i915:tgl 5/8 has new status: success (18m16s) 🞋 job i915:tgl 4/8 has new status: success (21m43s) 🞋 job i915:tgl 3/8 has new status: success (17m59s) 🞋 job i915:tgl 2/8 has new status: success (22m15s) 🞋 job i915:tgl 1/8 has new status: success (18m52s) 🞋 job i915:cml 2/2 has new status: success (1h19m58s) 🞋 job i915:cml 1/2 has new status: success (55m45s) 🞋 job i915:whl 2/2 has new status: success (1h8m56s) 🞋 job i915:whl 1/2 has new status: success (54m3s) 🞋 job i915:kbl 3/3 has new status: success (37m43s) 🞋 job i915:kbl 2/3 has new status: success (36m37s) 🞋 job i915:kbl 1/3 has new status: success (34m52s) 🞋 job i915:amly 2/2 has new status: success (1h7m60s) 🞋 job i915:amly 1/2 has new status: success (59m18s) 🞋 job i915:glk 2/2 has new status: success (58m26s) 🞋 job i915:glk 1/2 has new status: success (50m23s) 🞋 job i915:apl 3/3 has new status: success (1h6m39s) 🞋 job i915:apl 2/3 has new status: success (1h4m45s) 🞋 job i915:apl 1/3 has new status: success (1h7m38s) (generated with ci_run_n_monitor.py script) The longest job is 1h19m58s, so adjust the timeout. Signed-off-by:
-
Helen Koike authored
The Collabora Lava farm added a tag called `subset-1-gfx` to half of devices the graphics community use. Lets use this tag so we don't occupy all the resources. This is particular important because Mesa3D shares the resources with DRM-CI and use them to do pre-merge tests, so it can block developers from getting their patches merged. Signed-off-by:
-
Helen Koike authored
Since the script that collected the list of the expectation files was bogus and placing test to the flakes list incorrectly, restart the expectation files with the correct script. This reduces a lot the number of tests in the flakes list. Signed-off-by:
-
Helen Koike authored
IGT has recently merged a patch that makes code_getversion test to fails if the driver isn't loaded or if it isn't the expected one defined in variable IGT_FORCE_DRIVER. Without this test, jobs were passing when the driver didn't load or probe for some reason, giving the illusion that everything was ok. Uprev IGT to include this modification and include core_getversion test in all the shards. Signed-off-by:
-
Helen Koike authored
Add helper script that given a gitlab pipeline url, analyse which are the failures and flakes and update the xfails folder accordingly. Example: Trigger a pipeline in gitlab infrastructure, than re-try a few jobs more than once (so we can have data if failures are consistent across jobs with the same name or if they are flakes) and execute: update-xfails.py https://gitlab.freedesktop.org/helen.fornazier/linux/-/pipelines/970661 git diff should show you that it updated files in xfails folder. Signed-off-by:
Vignesh Raman <vignesh.raman@collabora.com> Reviewed-by:
-
Helen Koike authored
amdgpu driver wasn't loading because amdgpu firmware wasn't being installed in the rootfs due to the wrong DEBIAN_ARCH variable. rename ARCH to DEBIAN_ARCH also, so we don't have the confusing DEBIAN_ARCH, KERNEL_ARCH and ARCH. Signed-off-by:
-
Helen Koike authored
When building containers, some rust packages were installed without locking the dependencies version, which got updated and started giving errors like: error: failed to compile `bindgen-cli v0.62.0`, intermediate artifacts can be found at `/tmp/cargo-installkNKRwf` Caused by: package `rustix v0.38.13` cannot be built because it requires rustc 1.63 or newer, while the currently active rustc version is 1.60.0 A patch to Mesa was added fixing this error, so update it. Also, commit in linux kernel 6.6 rc3 broke booting in crosvm. Mesa has upreved crosvm to fix this issue. Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Acked-by:
-
Rob Clark authored
Dependency for CONFIG_DRM_PANEL_EDP. Missing this was causing the drm driver to not probe on devices that use panel-edp. Signed-off-by:
-
Dmitry Baryshkov authored
Enable CONFIG_MSM_MMCC_8996, the multimedia clock controller on Qualcomm MSM8996 to prevent the the board from hitting the probe deferral timeouts in CI run. Signed-off-by:
-
Dmitry Baryshkov authored
In case of the merge requests it might be useful to push repo-specific fixes which have not yet propagated to the -external-fixes branch in the main UPSTREAM_REPO. For example, in case of drm/msm development, we are staging fixes locally for testing, before pushing them to the drm/drm repo. Thus, if the CI run was triggered by merge request, also pick up the -external fixes basing on the the CI_MERGE target repo / and branch. Signed-off-by:
-
Maxime Ripard authored
Flaky tests can be very difficult to reproduce after the facts, which will make it even harder to ever fix. Let's document the metadata we agreed on to provide more context to anyone trying to address these fixes. Link: https://lore.kernel.org/dri-devel/CAPj87rPbJ1V1-R7WMTHkDat2A4nwSd61Df9mdGH2PR=ZzxaU=Q@mail.gmail.com/Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
- 25 Oct, 2023 1 commit
-
-
Simon Ser authored
The main motivation is to repeat that dumb buffers should not be abused for anything else than basic software rendering with KMS. User-space devs are more likely to look at the IOCTL docs than to actively search for the driver-oriented "Dumb Buffer Objects" section. v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and DRM_CAP_DUMB_PREFER_SHADOW (Pekka) Signed-off-by:
-
- 24 Oct, 2023 7 commits
-
-
Jonas Karlman authored
Add support for displaying 10-bit 4:2:0 and 4:2:2 formats produced by the Rockchip Video Decoder on RK322X, RK3288, RK3328 and RK3399. Also add support for 10-bit 4:4:4 format while at it. V5: Use drm_format_info_min_pitch() for correct bpp Add missing NV21, NV61 and NV42 formats V4: Rework RK3328/RK3399 win0/1 data to not affect RK3368 V2: Added NV30 support Signed-off-by:Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
Sandy Huang <hjc@rock-chips.com> Reviewed-by:
Christopher Obbard <chris.obbard@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-3-jonas@kwiboo.se
-
Jonas Karlman authored
DRM_FORMAT_NV20 and DRM_FORMAT_NV30 formats is the 2x1 and non-subsampled variant of NV15, a 10-bit 2-plane YUV format that has no padding between components. Instead, luminance and chrominance samples are grouped into 4s so that each group is packed into an integer number of bytes: YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes The '20' and '30' suffix refers to the optimum effective bits per pixel which is achieved when the total number of luminance samples is a multiple of 4. V2: Added NV30 format Signed-off-by:
-
Andy Yan authored
formats_win_full_10bit is for cluster window, formats_win_full_10bit_yuyv is for rk356x esmart, rk3588 esmart window will support more format. formats_win_lite is for smart window. Rename it based the windows type may let meaning is clearer Signed-off-by:
Andy Yan <andy.yan@rock-chips.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Andy Yan authored
Add 10 bit RGB and AFBC based YUV format supported by vop2. Signed-off-by:
-
Andy Yan authored
The cluster window on vop2 doesn't support linear yuv format(NV12/16/24), it only support afbc based yuv format(DRM_FORMAT_YUV420_8BIT/10BIT), which will be added in next patch. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
-
Andy Yan authored
We can't rely on cpp for bpp calculation as the cpp of some formats(DRM_FORMAT_YUV420_8BIT/10BIT, etc) is zero. Signed-off-by:
-
Liu Ying authored
In order to support burst mode, vendor drivers set lane_mbps higher than bandwidth through DPI interface. So, calculate horizontal component lane byte clock cycle(lbcc) based on lane_mbps instead of pixel clock rate for burst mode. Fixes: ac87d236 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc") Reported-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
-
