Skip to content

L
linux
Switch branch/tag
  1. 09 Mar, 2020 8 commits
  3. 07 Mar, 2020 10 commits
  5. 06 Mar, 2020 17 commits
    • David S. Miller's avatar
      Merge branch 'tun-debug' · 425c075d
      David S. Miller authored 
      Michal Kubecek says:

====================
tun: debug messages cleanup

While testing ethtool output for "strange" devices, I noticed confusing and
obviously incorrect message level information for a tun device and sent
a quick fix. The result of the upstream discussion was that tun driver
would rather deserve a more complex cleanup of the way it handles debug
messages.

The main problem is that all debugging statements and setting of message
level are controlled by TUN_DEBUG macro which is only defined if one edits
the source and rebuilds the module, otherwise all DBG1() and tun_debug()
statements do nothing.

This series drops the TUN_DEBUG switch and replaces custom tun_debug()
macro with standard netif_info() so that message level (mask) set and
displayed using ethtool works as expected. Some debugging messages are
dropped as they only notify about entering a function which can be done
easily using ftrace or kprobe.

Patch 1 is a trivial fix for compilation warning with W=1.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      425c075d
    • Michal Kubecek's avatar
      tun: drop TUN_DEBUG and tun_debug() · 5af09071
      Michal Kubecek authored 
      TUN_DEBUG and tun_debug() are no longer used anywhere, drop them.
Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5af09071
    • Michal Kubecek's avatar
      tun: replace tun_debug() by netif_info() · 3424170f
      Michal Kubecek authored 
      The tun driver uses custom macro tun_debug() which is only available if
TUN_DEBUG is set. Replace it by standard netif_ifinfo(). For that purpose,
rename tun_struct::debug to msg_enable and make it u32 and always present.
Finally, make tun_get_msglevel(), tun_set_msglevel() and TUNSETDEBUG ioctl
independent of TUN_DEBUG.
Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3424170f
    • Michal Kubecek's avatar
      tun: drop useless debugging statements · 18209434
      Michal Kubecek authored 
      Some of the tun_debug() statements only inform us about entering
a function which can be easily achieved with ftrace or kprobe. As
tun_debug() is no-op unless TUN_DEBUG is set which requires editing the
source and recompiling, setting up ftrace or kprobe is easier. Drop these
debug statements.

Also drop the tun_debug() statement informing about SIOCSIFHWADDR ioctl.
We can monitor these through rtnetlink and it makes little sense to log
address changes through ioctl but not changes through rtnetlink. Moreover,
this tun_debug() is called even if the actual address change fails which
makes it even less useful.
Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      18209434
    • Michal Kubecek's avatar
      tun: get rid of DBG1() macro · 7522416d
      Michal Kubecek authored 
      This macro is no-op unless TUN_DEBUG is defined (which requires editing and
recompiling the source) and only does something if variable debug is 2 but
that variable is zero initialized and never set to anything else. Moreover,
the only use of the macro informs about entering function tun_chr_open()
which can be easily achieved using ftrace or kprobe.

Drop DBG1() macro, its only use and global variable debug.
Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7522416d
    • Michal Kubecek's avatar
      tun: fix misleading comment format · 516c512b
      Michal Kubecek authored 
      The comment above tun_flow_save_rps_rxhash() starts with "/**" which
makes it look like kerneldoc comment and results in warnings when
building with W=1. Fix the format to make it look like a normal comment.
Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      516c512b
    • Roman Mashak's avatar
      tc-testing: updated tdc tests for basic filter with canid extended match rules · 9dd620af
      Roman Mashak authored 
      Signed-off-by: default avatarRoman Mashak <mrv@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9dd620af
    • Roman Mashak's avatar
      tc-testing: list kernel options for basic filter with canid ematch. · 52ef8108
      Roman Mashak authored 
      Signed-off-by: default avatarRoman Mashak <mrv@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      52ef8108
    • David S. Miller's avatar
      Merge branch 'PCI-Implement-function-to-read-Device-Serial-Number' · 5e0db7e4
      David S. Miller authored 
      Jacob Keller says:

====================
PCI: Implement function to read Device Serial Number

Several drivers read the Device Serial Number from the PCIe extended
configuration space. Each of these drivers implements a similar approach to
finding the position and then extracting the 8 bytes of data.

Implement a new helper function, pci_get_dsn, which can be used to extract
this data into an 8 byte array.

Modify the bnxt_en, qedf, ice, ixgbe and nfp drivers to use this new
function.

The intent for this is to reduce duplicate code across the various drivers,
and make it easier to write future code that wants to read the DSN. In
particular the ice driver will be using the DSN as its serial number when
implementing the DEVLINK_CMD_INFO_GET.

The new implementation in v2 significantly simplifies some of the callers
which just want to print the value out in MSB order. By returning things as
a u64 in CPU Endian order, the "%016llX" printf format specifier can be used
to correctly format the value.

Per patch changes since v1
  PCI: Introduce pci_get_dsn
  * Update commit message based on feedback from Bjorn Helgaas
  * Modify the function to return a u64 (zero on no capability)
  * This new implementation ensures that the first dword is the lower 32
    bits and the second dword is the upper 32 bits.

  bnxt_en: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * Copy it into the dsn[] array by using put_unaligned_le64
  * Fix a pre-existing typo in the netdev_info error message

  scsi: qedf: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * simplify the snprintf to use "%016llX"
  * remove the unused 'i' variable

  ice: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * simplify the snprintf to use "%016llX"

  ixgbe: Use pci_get_dsn()
  * Use the u64 return value from pci_get_dsn()
  * simplify the snprintf to use "%016llX"

  nfp: Use pci_get_dsn()
  * Added in v2
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e0db7e4
    • Jacob Keller's avatar
      nfp: Use pci_get_dsn() · 61600112
      Jacob Keller authored 
      Use the newly added pci_get_dsn() function for obtaining the 64-bit
Device Serial Number in the nfp6000_read_serial and
nfp_6000_get_interface functions.

pci_get_dsn() reports the Device Serial number as a u64 value created by
combining two pci_read_config_dword functions. The lower 16 bits
represent the device interface value, and the next 48 bits represent the
serial value. Use put_unaligned_be32 and put_unaligned_be16 to convert
the serial value portion into a Big Endian formatted serial u8 array.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61600112
    • Jacob Keller's avatar
      ixgbe: Use pci_get_dsn() · f998958d
      Jacob Keller authored 
      Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The original code used a simple for-loop to read the bytes in order into
a buffer one byte at a time.

The pci_get_dsn() function returns the DSN as a u64, correctly ordering
the upper and lower 32 bit dwords. Simplify the display code by using
%016llX to display the u64 DSN.

This should have equivalent behavior on both Little and Big Endian
systems. The bus will have correctly ordered the dwords in the CPU
endian format, while pci_get_dsn() will correctly order the lower and
higher dwords into a u64.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f998958d
    • Jacob Keller's avatar
      ice: Use pci_get_dsn() · ceb2f007
      Jacob Keller authored 
      Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The pci_get_dsn() function will perform two pci_read_config_dword calls
to read the lower and upper config dwords. It bitwise ORs them into
a u64 value. Instead of using put_unaligned_le32 to convert the value to
LE32 format, just use the %016llX printf specifier. This will print the
u64 correct, putting the most significant byte of the value first. Since
pci_get_dsn() correctly orders the two dwords into a u64, this should
produce equivalent results in less code.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ceb2f007
    • Jacob Keller's avatar
      scsi: qedf: Use pci_get_dsn() · dbce64cb
      Jacob Keller authored 
      Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The original code used a for-loop that looped over each of the 8 bytes
and copied them into a temporary buffer. pci_get_dsn() uses two calls to
pci_read_config_dword, and correctly bitwise ORs them into a u64. Thus,
we can simplify the snprintf significantly using %016llX on a u64 value.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dbce64cb
    • Jacob Keller's avatar
      bnxt_en: Use pci_get_dsn() · 8d85b75b
      Jacob Keller authored 
      Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

Use of put_unaligned_le64 should be correct. pci_get_dsn() will perform
two pci_read_config_dword calls. The first dword will be placed in the
first 32 bits of the u64, while the second dword will be placed in the
upper 32 bits of the u64.

On Little Endian systems, the least significant byte comes first, which
will be the least significant byte of the first dword, followed by the
least significant byte of the second dword. Since the _le32 variations
do not perform byte swapping, we will correctly copy the dwords into the
dsn[] array in the same order as before.

On Big Endian systems, the most significant byte of the second dword
will come first. put_unaligned_le64 will perform a CPU_TO_LE64, which
will swap things correctly before copying. This should also end up with
the correct bytes in the dsn[] array.

While at it, fix a small typo in the netdev_info error message when the
DSN cannot be read.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8d85b75b
    • Jacob Keller's avatar
      PCI: Introduce pci_get_dsn · 70c0923b
      Jacob Keller authored 
      Several device drivers read their Device Serial Number from the PCIe
extended config space.

Introduce a new helper function, pci_get_dsn(). This function reads the
eight bytes of the DSN and returns them as a u64. If the capability does not
exist for the device, the function returns 0.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Acked-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      70c0923b
    • Matthew Wilcox (Oracle)'s avatar
      ibmveth: Remove unused page_offset macro · 367ab29e
      Matthew Wilcox (Oracle) authored 
      We already have a function called page_offset(), and this macro
is unused, so just delete it.
Signed-off-by: default avatarMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      367ab29e
    • Vivek Thampi's avatar
      ptp: add VMware virtual PTP clock driver · 7d10001e
      Vivek Thampi authored 
      Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi
hypervisor. The driver attaches to a VMware virtual device called
"precision clock" that provides a mechanism for querying host system time.
Similar to existing virtual PTP clock drivers (e.g. ptp_kvm), ptp_vmw
utilizes the kernel's PTP hardware clock API to implement a clock device
that can be used as a reference in Chrony for synchronizing guest time with
host.

The driver is only applicable to x86 guests running in VMware virtual
machines with precision clock virtual device present. It uses a VMware
specific hypercall mechanism to read time from the device.
Reviewed-by: default avatarThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: default avatarVivek Thampi <vithampi@vmware.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d10001e
  7. 05 Mar, 2020 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7