Add dedicated google,gs101-mct compatible to the dt-schema for
representing mct timer of the Google Tensor gs101 SoC.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231222165355.1462740-2-peter.griffin@linaro.org

All warnings (new ones prefixed by >>):

   drivers/clocksource/timer-imx-gpt.c: In function 'mxc_timer_interrupt':
>> drivers/clocksource/timer-imx-gpt.c:279:18: warning: variable 'tstat' set but not used [-Wunused-but-set-variable]
     279 |         uint32_t tstat;
         |                  ^~~~~

vim +/tstat +279 drivers/clocksource/timer-imx-gpt.c

The change remove the tstats assignment but not the reading of the
register, assuming the register may be a ROR (Reset On Read) which
happens in the driver's interrupt registers.

Fixes: df181e38 ("clocksource/drivers/imx-gpt: Add support for ARM64")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312231803.XzPddRa5-lkp@intel.com/Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231227143546.2823683-1-daniel.lezcano@linaro.org

When offlining and onlining CPUs the overall reported idle and iowait
times as reported by /proc/stat jump backward and forward:

cpu  132 0 176 225249 47 6 6 21 0 0
cpu0 80 0 115 112575 33 3 4 18 0 0
cpu1 52 0 60 112673 13 3 1 2 0 0

cpu  133 0 177 226681 47 6 6 21 0 0
cpu0 80 0 116 113387 33 3 4 18 0 0

cpu  133 0 178 114431 33 6 6 21 0 0 <---- jump backward
cpu0 80 0 116 114247 33 3 4 18 0 0
cpu1 52 0 61 183 0 3 1 2 0 0        <---- idle + iowait start with 0

cpu  133 0 178 228956 47 6 6 21 0 0 <---- jump forward
cpu0 81 0 117 114929 33 3 4 18 0 0

Reason for this is that get_idle_time() in fs/proc/stat.c has different
sources for both values depending on if a CPU is online or offline:

- if a CPU is online the values may be taken from its per cpu
  tick_cpu_sched structure

- if a CPU is offline the values are taken from its per cpu cpustat
  structure

The problem is that the per cpu tick_cpu_sched structure is set to zero on
CPU offline. See tick_cancel_sched_timer() in kernel/time/tick-sched.c.

Therefore when a CPU is brought offline and online afterwards both its idle
and iowait sleeptime will be zero, causing a jump backward in total system
idle and iowait sleeptime. In a similar way if a CPU is then brought
offline again the total idle and iowait sleeptimes will jump forward.

It looks like this behavior was introduced with commit 4b0c0f29
("tick: Cleanup NOHZ per cpu data on cpu down").

This was only noticed now on s390, since we switched to generic idle time
reporting with commit be76ea61 ("s390/idle: remove arch_cpu_idle_time()
and corresponding code").

Fix this by preserving the values of idle_sleeptime and iowait_sleeptime
members of the per-cpu tick_sched structure on CPU hotplug.

Fixes: 4b0c0f29 ("tick: Cleanup NOHZ per cpu data on cpu down")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240115163555.1004144-1-hca@linux.ibm.com

Pull clockevent/clocksource updates from Daniel Lezcano:

   - Fixed error handling at probe time and uninitialized return code on
     ep93xx (Arnd Bergman)

   - Fixed some kerneldoc warning on Cadence TTC (Randy Dunlap)

   - Fixed kerneldoc warning on Timer TI DM (Tony Lindgren)

   - Handle interrupt disabling when shutting down the timer on RISC-V
     timer (Joshua Yeong)

   - Add compatible string for the StarFive JH8100 clint (Sia Jee Heng)

   - Separate mtime and mtimecmp registers in DT bindings (Inochi Amaoto)

Link: https://lore.kernel.org/lkml/0f07af92-e4b2-48de-88a6-dd9aa9e49743@linaro.org

When the interrupt property fails to be parsed, ep93xx_timer_of_init()
return code ends up uninitialized:

drivers/clocksource/timer-ep93xx.c:160:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (irq < 0) {
            ^~~~~~~
drivers/clocksource/timer-ep93xx.c:188:9: note: uninitialized use occurs here
        return ret;
               ^~~
drivers/clocksource/timer-ep93xx.c:160:2: note: remove the 'if' if its condition is always false
        if (irq < 0) {
        ^~~~~~~~~~~~~~

Simplify this portion to use the normal construct of just checking
whether a valid interrupt was returned. Note that irq_of_parse_and_map()
never returns a negative value and no other callers check for that either.

Fixes: c28ca80b ("clocksource: ep93xx: Add driver for Cirrus Logic EP93xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231212214616.193098-1-arnd@kernel.org

Fix some function kernel-doc warnings to placate scripts/kernel-doc.

timer-cadence-ttc.c:79: warning: Function parameter or member 'clk_rate_change_nb' not described in 'ttc_timer'
timer-cadence-ttc.c:158: warning: Function parameter or member 'cs' not described in '__ttc_clocksource_read'
timer-cadence-ttc.c:194: warning: expecting prototype for ttc_set_{shutdown|oneshot|periodic}(). Prototype was for ttc_shutdown() instead
timer-cadence-ttc.c:196: warning: No description found for return value of 'ttc_shutdown'
timer-cadence-ttc.c:212: warning: No description found for return value of 'ttc_set_periodic'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231205230448.772-1-rdunlap@infradead.org

Kernel test robot reports of kerneldoc related warnings that happen with
make W=n for "parameter or member not described".

These were caused by changes to function parameter names with
earlier commits where the kerneldoc parts were not updated.

Fixes: 49cd16bb ("clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write()")
Fixes: a6e543f6 ("clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040403.DzIiBuwU-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311040606.XL5OcR9O-lkp@intel.com/Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231114072930.40615-1-tony@atomide.com

Add clocksource detach/shutdown callback to disable RISC-V timer interrupt when
switching out riscv timer as clock source
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231116105312.4800-1-joshua.yeong@starfivetech.com

Add compatible string for the StarFive JH8100 clint.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201121410.95298-4-jeeheng.sia@starfivetech.com

The timer registers of aclint don't follow the clint layout and can
be mapped on any different offset. As sg2042 uses separated timer
and mswi for its clint, it should follow the aclint spec and have
separated registers.

The previous patch introduced a new type of T-HEAD aclint timer which
has clint timer layout. Although it has the clint timer layout, it
should follow the aclint spec and uses the separated mtime and mtimecmp
regs. So a ABI change is needed to make the timer fit the aclint spec.

To make T-HEAD aclint timer more closer to the aclint spec, use
regs-names to represent the mtimecmp register, which can avoid hack
for unsupport mtime register of T-HEAD aclint timer.

Also, as T-HEAD aclint only supports mtimecmp, it is unnecessary to
implement the whole aclint spec. To make this binding T-HEAD specific,
only add reg-name for existed register. For details, see the discussion
in the last link.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Fixes: 4734449f ("dt-bindings: timer: Add Sophgo sg2042 CLINT timer")
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005693.html
Link: https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc
Link: https://lore.kernel.org/all/IA1PR20MB4953F9D77FFC76A9D236922DBBB6A@IA1PR20MB4953.namprd20.prod.outlook.com/Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/IA1PR20MB49531ED1BCC00D6B265C2D10BB86A@IA1PR20MB4953.namprd20.prod.outlook.com

When no timer is queued into an empty timer base, the next_expiry will not
be updated. It was originally calculated as

  base->clk + NEXT_TIMER_MAX_DELTA

When the timer base stays empty long enough (> NEXT_TIMER_MAX_DELTA), the
next_expiry value of the empty base suggests that there is a timer pending
soon. This might be more a kind of a theoretical problem, but the fix
doesn't hurt.

Use only base->next_expiry value as nextevt when timers are
pending. Otherwise nextevt will be jiffies + NEXT_TIMER_MAX_DELTA. As all
information is in place, update base->next_expiry value of the empty timer
base as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-13-anna-maria@linutronix.de

To improve readability of the code, split base->idle calculation and
expires calculation into separate parts. While at it, update the comment
about timer base idle marking.

Thereby the following subtle change happens if the next event is just one
jiffy ahead and the tick was already stopped: Originally base->is_idle
remains true in this situation. Now base->is_idle turns to false. This may
spare an IPI if a timer is enqueued remotely to an idle CPU that is going
to tick on the next jiffy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-12-anna-maria@linutronix.de

There is an already existing function for forwarding the timer
base. Forwarding the timer base is implemented directly in
get_next_timer_interrupt() as well.

Remove the code duplication and invoke __forward_timer_base() instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-11-anna-maria@linutronix.de

Forwarding timer base is done when the next expiry value is calculated and
when a new timer is enqueued. When the next expiry value is calculated the
jiffies value is already available and does not need to be reread a second
time.

Splitting out the forward timer base functionality to make it executable
via both contextes - those where jiffies are already known and those, where
jiffies need to be read.

No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-10-anna-maria@linutronix.de

The current check whether a forward of the timer base is required can be
simplified by using an already existing comparison function which is easier
to read. The related comment is outdated and was not updated when the check
changed in commit 36cd28a4 ("timers: Lower base clock forwarding
threshold").

Use time_before_eq() for the check and replace the comment by copying the
comment from the same check inside get_next_timer_interrupt(). Move the
precious information of the outdated comment to the proper place in
__run_timers().

No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-9-anna-maria@linutronix.de

Both call sites of __next_timer_interrupt() store the return value directly
in base->next_expiry. Move the store into __next_timer_interrupt() and to
make its purpose more clear, rename the function to next_expiry_recalc().

No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-8-anna-maria@linutronix.de

Deferrable timers do not prevent CPU from going idle and are not taken into
account on idle path. Sending an IPI to a remote CPU when a new first
deferrable timer was enqueued will wake up the remote CPU but nothing will
be done regarding the deferrable timers.

Drop IPI completely when a new first deferrable timer was enqueued.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-7-anna-maria@linutronix.de

When debugging timer code the timer tracepoints are very important. There
is no tracepoint when the is_idle flag of the timer base changes. Instead
of always adding manually trace_printk(), add tracepoints which can be
easily enabled whenever required.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-6-anna-maria@linutronix.de

For starting a timer, the timer is enqueued into a bucket of the timer
wheel. The bucket expiry is the defacto expiry of the timer but it is not
equal the timer expiry because of increasing granularity when bucket is in
a higher level of the wheel. To be able to figure out in a trace whether a
timer expired in time or not, the bucket expiry time is required as well.

Add bucket expiry time to the timer_start tracepoint and thereby simplify
the arguments.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-5-anna-maria@linutronix.de

When the next tick is in the past, the delta between basemono and the next
tick gets negativ. But the next tick should never be in the past. The
negative effect of a wrong next tick might be a stop of the tick and timers
might expire late.

To prevent expensive debugging when changing underlying code, add a
WARN_ON_ONCE into this code path. To prevent complete misbehaviour, also
reset next_tick to basemono in this case.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-4-anna-maria@linutronix.de

tick_nohz_stop_tick() contains the expires (u64 variable) and tick
(ktime_t) variable. In the beginning the value of expires is written to
tick. Afterwards none of the variables is changed. They are only used for
checks.

Drop the not required variable tick and use always expires instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-3-anna-maria@linutronix.de

When referencing functions in comments, it might be helpful to use full
function names (including the prefix) to be able to find it when grepping.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-2-anna-maria@linutronix.de

This function is defined globally in clocksource.c and used conditionally
in clockevent.c, which the declaration hidden when clockevent support
is disabled. This causes a harmless warning in the definition:

kernel/time/clocksource.c:1324:9: warning: no previous prototype for 'sysfs_get_uname' [-Wmissing-prototypes]
 1324 | ssize_t sysfs_get_uname(const char *buf, char *dst, size_t cnt)

Move the declaration out of the #ifdef so it is always visible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231108125843.3806765-5-arnd@kernel.org

Merge tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix section mismatch warning messages for riscv and loongarch

 - Remove CONFIG_IA64 left-over from linux/export-internal.h

 - Fix the location of the quotes for UIMAGE_NAME

 - Fix a memory leak bug in Kconfig

* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix memory leak from range properties
  kbuild: Move the single quotes for image name
  linux/export: clean up the IA-64 KSYM_FUNC macro
  modpost: fix section mismatch message for RELA

Pull irq fix from Borislav Petkov:

 - Flush the translation service tables to prevent unpredictable
   behavior on non-coherent GIC devices

* tag 'irq_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs

Pull x86 fixes from Borislav Petkov:

 - Ignore invalid x2APIC entries in order to not waste per-CPU data

 - Fix a back-to-back signals handling scenario when shadow stack is in
   use

 - A documentation fix

 - Add Kirill as TDX maintainer

* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/acpi: Ignore invalid x2APIC entries
  x86/shstk: Delay signal entry SSP write until after user accesses
  x86/Documentation: Indent 'note::' directive for protocol version number note
  MAINTAINERS: Add Intel TDX entry

Pull timer fix from Borislav Petkov:

 - Do the push of pending hrtimers away from a CPU which is being
   offlined earlier in the offlining process in order to prevent a
   deadlock

* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimers: Push pending hrtimers away from outgoing CPU earlier

Pull scheduler fixes from Borislav Petkov:

 - Fix virtual runtime calculation when recomputing a sched entity's
   weights

 - Fix wrongly rejected unprivileged poll requests to the cgroup psi
   pressure files

 - Make sure the load balancing is done by only one CPU

* tag 'sched_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix the decision for load balance
  sched: psi: fix unprivileged polling against cgroups
  sched/eevdf: Fix vruntime adjustment on reweight

Pull locking fix from Borislav Petkov:

 - Fix a hardcoded futex flags case which lead to one robust futex test
   failure

* tag 'locking_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Fix hardcoded flags

Pull perf fix from Borislav Petkov:

 - Make sure the context refcount is transferred too when migrating perf
   events

* tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix cpuctx refcounting

Pull SCSI fixes from James Bottomley:
 "Seven small fixes, six in drivers and one in sd.

  The sd fix is so large because it changes a struct pointer to a struct
  but otherwise is fairly simple"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
  scsi: sd: Fix sshdr use in sd_suspend_common()
  scsi: scsi_debug: Delete some bogus error checking
  scsi: scsi_debug: Fix some bugs in sdebug_error_write()
  scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
  scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  scsi: qla2xxx: Fix system crash due to bad pointer access

Pull parisc fixes from Helge Deller:
 "On parisc we still sometimes need writeable stacks, e.g. if programs
  aren't compiled with gcc-14. To avoid issues with the upcoming
  systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now
  (for parisc only).

  The other two patches are minor: a bugfix for the soft power-off on
  qemu with 64-bit kernel and prefer strscpy() over strlcpy():

   - Fix power soft-off on qemu

   - Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
     writeable stacks

   - Use strscpy instead of strlcpy in show_cpuinfo()"

* tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  prctl: Disable prctl(PR_SET_MDWE) on parisc
  parisc/power: Fix power soft-off when running on qemu
  parisc: Replace strlcpy() with strscpy()

Pull xfs fixes from Chandan Babu:

 - Fix deadlock arising due to intent items in AIL not being cleared
   when log recovery fails

 - Fix stale data exposure bug when remapping COW fork extents to data
   fork

 - Fix deadlock when data device flush fails

 - Fix AGFL minimum size calculation

 - Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
   selected

 - Fix corruption of log inode's extent count field when NREXT64 feature
   is enabled

* tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: recovery should not clear di_flushiter unconditionally
  xfs: inode recovery does not validate the recovered inode
  xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
  xfs: fix internal error from AGFL exhaustion
  xfs: up(ic_sema) if flushing data device fails
  xfs: only remap the written blocks in xfs_reflink_end_cow_extent
  XFS: Update MAINTAINERS to catch all XFS documentation
  xfs: abort intent items when recovery intents fail
  xfs: factor out xfs_defer_pending_abort

Pull nfsd fixes from Chuck Lever:

 - Fix several long-standing bugs in the duplicate reply cache

 - Fix a memory leak

* tag 'nfsd-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Fix checksum mismatches in the duplicate reply cache
  NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
  NFSD: Update nfsd_cache_append() to use xdr_stream
  nfsd: fix file memleak on client_opens_release

Pull smb client fixes from Steve French:

 - multichannel fixes (including a lock ordering fix and an important
   refcounting fix)

 - spnego fix

* tag '6.7-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix lock ordering while disabling multichannel
  cifs: fix leak of iface for primary channel
  cifs: fix check of rc in function generate_smb3signingkey
  cifs: spnego: add ';' in HOST_KEY_LEN

systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.

Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+

Merge tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Various fixes for the DM delay target to address regressions
   introduced during the 6.7 merge window

 - Fixes to both DM bufio and the verity target for no-sleep mode,
   to address sleeping while atomic issues

 - Update DM crypt target in response to the treewide change that
   made MAX_ORDER inclusive

* tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-crypt: start allocating with MAX_ORDER
  dm-verity: don't use blocking calls from tasklets
  dm-bufio: fix no-sleep mode
  dm-delay: avoid duplicate logic
  dm-delay: fix bugs introduced by kthread mode
  dm-delay: fix a race between delay_presuspend and delay_bio

Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.

Fixes: d0c21947 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+

strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>