- 30 May, 2024 3 commits
-
-
Manikandan Muralidharan authored
Replace regmap_read with regmap_read_poll_timeout to neatly handle retries Signed-off-by:
Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by:
Dharma Balasubiramani <dharma.b@microchip.com> Reviewed-by:
Hari Prasath Gujulan Elango <hari.prasathge@microchip.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240424053351.589830-4-manikandan.m@microchip.com
-
Durai Manickam KR authored
The register address of the XLCDC IP used in SAM9X7 SoC family are different from the previous HLCDC. Defining those address space with valid macros. Signed-off-by:
Durai Manickam KR <durai.manickamkr@microchip.com> [manikandan.m@microchip.com: Remove unused macro definitions] Signed-off-by:
Lee Jones <lee@kernel.org> Acked-by:
-
Manikandan Muralidharan authored
Add LCD IP specific ops in driver data to differentiate HLCDC and XLCDC code within the atmel-hlcdc driver files. XLCDC in SAM9X7 has different sets of registers and additional configuration bits when compared to previous HLCDC IP. Read/write operation on the controller register and functionality is now separated using the LCD IP specific ops. Signed-off-by:
-
- 29 May, 2024 2 commits
-
-
Maxime Ripard authored
During the life of the series that introduced the DRM_DISPLAY_HDMI_STATE_HELPER option, we reworked the Kconfig option dependency setup to rely on depends on with commit f6d2dc03 ("drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on") which got reverted later on because it was creating too many issues by commit d7c128cb ("Revert "drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on""). However, since the series was out of tree at that time, DRM_DISPLAY_HDMI_STATE_HELPER wasn't properly updated to take the revert into account and is now creating build issues. Let's switch the depends on to a select to fix this. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405290332.Sqtt0ix0-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202405290438.TOYhXMIn-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202405290803.c3178DYT-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202405291109.PQdqc46g-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202405291221.a0NStxHE-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202405291636.8GgBtK8u-lkp@intel.com/ Fixes: 54cb39e2 ("drm/connector: hdmi: Create an HDMI sub-state") Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240529080013.2325748-1-mripard@kernel.orgSigned-off-by:
Maxime Ripard <mripard@kernel.org>
-
Maxime Ripard authored
Commit ea64761a ("drm/sun4i: hdmi: Switch to HDMI connector") introduced a dependency that got renamed in a previous version, but wasn't properly updated in that driver. Fix the name of the function. Reported-by:
-
- 28 May, 2024 35 commits
-
-
Pin-yen Lin authored
Same as commit 7c8690d8 ("drm/panel-edp: Add some panels with conservative timings"), the 3 panels added in this patch are used by Mediatek MT8173 Chromebooks and they used to work with the downstream v4.19 kernel without any specified delay. These panel IDs were found from in-field reports, but their datahseets are not available. For BOE 0x0623 and SHP 0x153a, their product names are retrieved from the EDIDs. The EDID of AUO 0x1999 does not contain such information, so list as "Unknown" in this patch. Update these entries with less-conservative timings from other panels of the same vendor. Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Pin-yen Lin authored
Add support for the following models: AUO B140HTN02.0 BOE NT116WHM-N21 V4.1 BOE NT116WHM-N21 Signed-off-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by TI OMAP boards. The TI OMAP driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. The acx565akm seems to do some unique stuff with the "enabled" state. Specifically: 1. It seems to detect the enabled state based on how the bootloader left the panel. 2. It uses the enabled state to prevent certain sysfs files from accessing a disabled panel. We'll leave the "enabled" state tracking for this. However, we can at least get rid of the double-check when trying to disable. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. The compatible strings used by this driver seem to show up across boards using a variety of DRM drivers. It appears that the relevant drivers have been converted, but at least one compatible string doesn't seem to be found in any mainline dts files so we can't be 100% sure. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Guido Günther <agx@sigxcpu.org> Cc: Ondřej Jirman <megi@xff.cz> Cc: Chris Morgan <macromorgan@hotmail.com> Cc: Frank Oltmanns <frank@oltmanns.dev> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. One thing to note for st7703 is that it has a special "allpixelson" debugfs file. When this file is written the driver hacks a disable/unprepare and then a prepare/enable to try to reset the panel. Potentially that might have been relying on the old booleans we removed. It'll still "work" because of the checks in the core but it deserves a comment. This debugfs file didn't appear to be particularly safe to use even before this patch since it would cause a disabled/unprepared panel to become prepared/enabled. Cc: Guido Günther <agx@sigxcpu.org> Cc: Ondřej Jirman <megi@xff.cz> Cc: Chris Morgan <macromorgan@hotmail.com> Cc: Frank Oltmanns <frank@oltmanns.dev> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Rockchip boards. The Rockchip driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, it's very difficult to know exactly which DRM modeset drivers are using panel-simple due to the sheer number of panels it handles. For now, we'll leave the calls and just add a comment to keep people from copying this code. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Signed-off-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benni Steini <bennisteinir@gmail.com> Cc: Marijn Suijten <marijn.suijten@somainline.org> Acked-by:
Joel Selvaraj <jo@jsfamily.in> Signed-off-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benni Steini <bennisteinir@gmail.com> Cc: Marijn Suijten <marijn.suijten@somainline.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
Quentin Schulz <quentin.schulz@cherry.de> Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3399 Puma with Haikou Video Demo Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # PX30 Ringneck with Haikou Video Demo Signed-off-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Rockchip boards. The Rockchip driver appear to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Brian Norris <briannorris@chromium.org> Cc: Chris Zhong <zyw@rock-chips.com> Cc: Nickey Yang <nickey.yang@rock-chips.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Brian Norris <briannorris@chromium.org> Cc: Chris Zhong <zyw@rock-chips.com> Cc: Nickey Yang <nickey.yang@rock-chips.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Rockchip boards. The Rockchip driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Chris Zhong <zyw@rock-chips.com> Cc: Lin Huang <hl@rock-chips.com> Cc: Brian Norris <briannorris@chromium.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Chris Zhong <zyw@rock-chips.com> Cc: Lin Huang <hl@rock-chips.com> Cc: Brian Norris <briannorris@chromium.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, it's very difficult to know exactly which DRM modeset drivers are using panel-edp due to the sheer number of panels it handles. For now, we'll leave the calls and just add a comment to keep people from copying this code. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Mediatek and Qualcomm boards. Both of those drivers appear to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by:
Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
Ville Syrjälä authored
Allow sti to be built with COMPILE_TEST=y for greater coverage. Builds fine on x86/x86_64 at least. Cc: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-8-ville.syrjala@linux.intel.comAcked-by:
Alain Volmat <alain.volmat@foss.st.com>
-
Ville Syrjälä authored
Include linux/io.h for devm_ioremap(). When built on x86_64 w/ COMPILE_TEST=y: ../drivers/gpu/drm/sti/sti_dvo.c:531:21: error: implicit declaration of function ‘devm_ioremap’ [-Werror=implicit-function-declaration] 531 | dvo->regs = devm_ioremap(dev, res->start, | ^~~~~~~~~~~~ ../drivers/gpu/drm/sti/sti_dvo.c:531:19: error: assignment to ‘void *’ from ‘int’ makes pointer from integer without a cast [-Werror=int-conversion] 531 | dvo->regs = devm_ioremap(dev, res->start, | ^ Cc: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: -
MarileneGarcia authored
It fixes the following warnings when the kernel documentation is generated: ./include/drm/display/drm_dp_helper.h:126: warning: Function parameter or struct member 'mode' not described in 'drm_dp_as_sdp' ./include/drm/display/drm_dp_helper.h:126: warning: Excess struct member 'operation_mode' description in 'drm_dp_as_sdp' Signed-off-by:
MarileneGarcia <marilene.agarcia@gmail.com> Fixes: 0bbb8f59 ("drm/dp: Add Adaptive Sync SDP logging") Reviewed-by:
Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20240405141640.09b0bdbf@canb.auug.org.auReviewed-by:
-
Alex Bee authored
The DesignWare MIPI DSI controller found RK3128 SoCs supports up to 4 DSI data lanes. Similar to PX30/RK356x/RV1126 it uses an external D-PHY. Signed-off-by:
Alex Bee <knaerzche@gmail.com> Signed-off-by:
-
Alex Bee authored
Document the MIPI DSI controller for Rockchip RK3128. The integration is similar to PX30 so it's bindings-constraints can be re-used. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Maxime Ripard authored
The new HDMI connector infrastructure allows to remove some boilerplate, especially to generate infoframes. Let's switch to it. Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by:
Andy Yan <andyshrk@163.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-29-c5af16c3aae2@kernel.orgSigned-off-by:
-
Maxime Ripard authored
The new HDMI connector infrastructure allows to remove some boilerplate, especially to generate infoframes. Let's switch to it. Reviewed-by:
-
Maxime Ripard authored
Now that we have a plane create helper for kunit mocked drivers, let's convert to it in vc4. Reviewed-by:
Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-27-c5af16c3aae2@kernel.orgSigned-off-by:
-
