- 14 Aug, 2018 40 commits
-
-
Jack Morgenstein authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit d546b67c ] spin_lock/unlock was used instead of spin_un/lock_irq in a procedure used in process space, on a spinlock which can be grabbed in an interrupt. This caused the stack trace below to be displayed (on kernel 4.17.0-rc1 compiled with Lock Debugging enabled): [ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I [ 154.675856] ----------------------------------------------------- [ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core] [ 154.700927] and this task is already holding: [ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib] [ 154.718028] which would create a new lock dependency: [ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.} [ 154.731922] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 154.740798] (&(&cq->lock)->rlock){..-.} [ 154.740800] ... which became SOFTIRQ-irq-safe at: [ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50 [ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib] [ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib] ... to a SOFTIRQ-irq-unsafe lock: [ 154.815603] (&(&qp_table->lock)->rlock){+.+.} [ 154.815604] ... which became SOFTIRQ-irq-unsafe at: [ 154.827718] ... [ 154.827720] _raw_spin_lock+0x35/0x50 [ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core] [ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core] Since mlx4_qp_lookup() is called only in process space, we can simply replace the spin_un/lock calls with spin_un/lock_irq calls. Fixes: 6dc06c08 ("net/mlx4: Fix the check in attaching steering rules") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Shahed Shaikh authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit fdd13dd3 ] ILT entry requires 12 bit right shifted physical address. Existing mask for ILT entry of physical address i.e. ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit address because upper 8 bits of 64 bit address were getting masked which resulted in completer abort error on PCIe bus due to invalid address. Fix that mask to handle 64bit physical address. Fixes: fe56b9e6 ("qed: Add module with basic common support") Signed-off-by:
Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 9aad13b0 ] Commit b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") ensures that packet_snd always starts writing the link layer header in reserved headroom allocated for this purpose. This is needed because packets may be shorter than hard_header_len, in which case the space up to hard_header_len may be zeroed. But that necessary padding is not accounted for in skb->len. The fix, however, is buggy. It calls skb_push, which grows skb->len when moving skb->data back. But in this case packet length should not change. Instead, call skb_reserve, which moves both skb->data and skb->tail back, without changing length. Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") Reported-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Daniele Palmas authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 9f7c7283 ] Testing Telit LM940 with ICMP packets > 14552 bytes revealed that the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc mbim data interface won't be anymore responsive. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit eb73190f ] syzbot was able to trick af_packet again [1] Various commits tried to address the problem in the past, but failed to take into account V3 header size. [1] tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96 BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline] BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039 Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106 CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline] prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline] packet_current_rx_frame net/packet/af_packet.c:1117 [inline] tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018 xmit_one net/core/dev.c:3049 [inline] dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:277 [inline] ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:288 [inline] ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 The buggy address belongs to the page: page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80 raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 2b6867c2 ("net/packet: fix overflow in check for priv area size") Fixes: dc808110 ("packet: handle too big packets for PACKET_V3") Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 75d4e704 ] Per discussion with David at netconf 2018, let's clarify DaveM's position of handling stable backports in netdev-FAQ. This is important for people relying on upstream -stable releases. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 6009d1fe ] In divasmain.c, the function divas_write() firstly invokes the function diva_xdi_open_adapter() to open the adapter that matches with the adapter number provided by the user, and then invokes the function diva_xdi_write() to perform the write operation using the matched adapter. The two functions diva_xdi_open_adapter() and diva_xdi_write() are located in diva.c. In diva_xdi_open_adapter(), the user command is copied to the object 'msg' from the userspace pointer 'src' through the function pointer 'cp_fn', which eventually calls copy_from_user() to do the copy. Then, the adapter number 'msg.adapter' is used to find out a matched adapter from the 'adapter_queue'. A matched adapter will be returned if it is found. Otherwise, NULL is returned to indicate the failure of the verification on the adapter number. As mentioned above, if a matched adapter is returned, the function diva_xdi_write() is invoked to perform the write operation. In this function, the user command is copied once again from the userspace pointer 'src', which is the same as the 'src' pointer in diva_xdi_open_adapter() as both of them are from the 'buf' pointer in divas_write(). Similarly, the copy is achieved through the function pointer 'cp_fn', which finally calls copy_from_user(). After the successful copy, the corresponding command processing handler of the matched adapter is invoked to perform the write operation. It is obvious that there are two copies here from userspace, one is in diva_xdi_open_adapter(), and one is in diva_xdi_write(). Plus, both of these two copies share the same source userspace pointer, i.e., the 'buf' pointer in divas_write(). Given that a malicious userspace process can race to change the content pointed by the 'buf' pointer, this can pose potential security issues. For example, in the first copy, the user provides a valid adapter number to pass the verification process and a valid adapter can be found. Then the user can modify the adapter number to an invalid number. This way, the user can bypass the verification process of the adapter number and inject inconsistent data. This patch reuses the data copied in diva_xdi_open_adapter() and passes it to diva_xdi_write(). This way, the above issues can be avoided. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 730c54d5 ] A precondition check in ip_recv_error triggered on an otherwise benign race. Remove the warning. The warning triggers when passing an ipv6 socket to this ipv4 error handling function. RaceFuzzer was able to trigger it due to a race in setsockopt IPV6_ADDRFORM. --- CPU0 do_ipv6_setsockopt sk->sk_socket->ops = &inet_dgram_ops; --- CPU1 sk->sk_prot->recvmsg udp_recvmsg ip_recv_error WARN_ON_ONCE(sk->sk_family == AF_INET6); --- CPU0 do_ipv6_setsockopt sk->sk_family = PF_INET; This socket option converts a v6 socket that is connected to a v4 peer to an v4 socket. It updates the socket on the fly, changing fields in sk as well as other structs. This is inherently non-atomic. It races with the lockless udp_recvmsg path. No other code makes an assumption that these fields are updated atomically. It is benign here, too, as ip_recv_error cares only about the protocol of the skbs enqueued on the error queue, for which sk_family is not a precise predictor (thanks to another isue with IPV6_ADDRFORM). Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr Fixes: 7ce875e5 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error") Reported-by:
DaeRyong Jeong <threeearcat@gmail.com> Suggested-by:
-
Sabrina Dubroca authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 848235ed ] Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same setsockopt will fail with -ENOENT, since we haven't actually created that table. A similar fix for ipv4 was included in commit 5e1859fb ("ipv4: ipmr: various fixes and cleanups"). Fixes: d1db275d ("ipv6: ip6mr: support multiple tables") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Govindarajulu Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 322eaa06 ] In commit 624dbf55 ("driver/net: enic: Try DMA 64 first, then failover to DMA") DMA mask was changed from 40 bits to 64 bits. Hardware actually supports only 47 bits. Fixes: 624dbf55 ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Alexey Kodanev authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit 2677d206 ] Syzbot reported the use-after-free in timer_is_static_object() [1]. This can happen because the structure for the rto timer (ccid2_hc_tx_sock) is removed in dccp_disconnect(), and ccid2_hc_tx_rto_expire() can be called after that. The report [1] is similar to the one in commit 120e9dab ("dccp: defer ccid_hc_tx_delete() at dismantle time"). And the fix is the same, delay freeing ccid2_hc_tx_sock structure, so that it is freed in dccp_sk_destruct(). [1] ================================================================== BUG: KASAN: use-after-free in timer_is_static_object+0x80/0x90 kernel/time/timer.c:607 Read of size 8 at addr ffff8801bebb5118 by task syz-executor2/25299 CPU: 1 PID: 25299 Comm: syz-executor2 Not tainted 4.17.0-rc5+ #54 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 timer_is_static_object+0x80/0x90 kernel/time/timer.c:607 debug_object_activate+0x2d9/0x670 lib/debugobjects.c:508 debug_timer_activate kernel/time/timer.c:709 [inline] debug_activate kernel/time/timer.c:764 [inline] __mod_timer kernel/time/timer.c:1041 [inline] mod_timer+0x4d3/0x13b0 kernel/time/timer.c:1102 sk_reset_timer+0x22/0x60 net/core/sock.c:2742 ccid2_hc_tx_rto_expire+0x587/0x680 net/dccp/ccids/ccid2.c:147 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:525 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 </IRQ> ... Allocated by task 25374: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 ccid_new+0x25b/0x3e0 net/dccp/ccid.c:151 dccp_hdlr_ccid+0x27/0x150 net/dccp/feat.c:44 __dccp_feat_activate+0x184/0x270 net/dccp/feat.c:344 dccp_feat_activate_values+0x3a7/0x819 net/dccp/feat.c:1538 dccp_create_openreq_child+0x472/0x610 net/dccp/minisocks.c:128 dccp_v4_request_recv_sock+0x12c/0xca0 net/dccp/ipv4.c:408 dccp_v6_request_recv_sock+0x125d/0x1f10 net/dccp/ipv6.c:415 dccp_check_req+0x455/0x6a0 net/dccp/minisocks.c:197 dccp_v4_rcv+0x7b8/0x1f3f net/dccp/ipv4.c:841 ip_local_deliver_finish+0x2e3/0xd80 net/ipv4/ip_input.c:215 NF_HOOK include/linux/netfilter.h:288 [inline] ip_local_deliver+0x1e1/0x720 net/ipv4/ip_input.c:256 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x81b/0x2200 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:288 [inline] ip_rcv+0xb70/0x143d net/ipv4/ip_input.c:492 __netif_receive_skb_core+0x26f5/0x3630 net/core/dev.c:4592 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4657 process_backlog+0x219/0x760 net/core/dev.c:5337 napi_poll net/core/dev.c:5735 [inline] net_rx_action+0x7b7/0x1930 net/core/dev.c:5801 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 Freed by task 25374: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 ccid_hc_tx_delete+0xc3/0x100 net/dccp/ccid.c:190 dccp_disconnect+0x130/0xc66 net/dccp/proto.c:286 dccp_close+0x3bc/0xe60 net/dccp/proto.c:1045 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460 sock_release+0x96/0x1b0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x34d/0x890 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1e4/0x290 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:191 [inline] exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801bebb4cc0 which belongs to the cache ccid2_hc_tx_sock of size 1240 The buggy address is located 1112 bytes inside of 1240-byte region [ffff8801bebb4cc0, ffff8801bebb5198) The buggy address belongs to the page: page:ffffea0006faed00 count:1 mapcount:0 mapping:ffff8801bebb41c0 index:0xffff8801bebb5240 compound_mapcount: 0 flags: 0x2fffc0000008100(slab|head) raw: 02fffc0000008100 ffff8801bebb41c0 ffff8801bebb5240 0000000100000003 raw: ffff8801cdba3138 ffffea0007634120 ffff8801cdbaab40 0000000000000000 page dumped because: kasan: bad access detected ... ================================================================== Reported-by: syzbot+5d47e9ec91a6f15dbd6f@syzkaller.appspotmail.com Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Julia Lawall authored
BugLink: https://bugs.launchpad.net/bugs/1777063 [ Upstream commit dd612f18 ] Nearby code that also tests port suggests that the P0 constant should be used when port is zero. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; @@ * e ? e1 : e1 // </smpl> Fixes: 6c3218c6 ("bnx2x: Adjust ETS to 578xx") Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Stefan Wahren authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit 9b9322db upstream. The commit "regulatory: add NUL to request alpha2" increases the length of alpha2 to 3. This causes a regression on brcmfmac, because brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete array. So fix this accordingly. Fixes: 657308f7 ("regulatory: add NUL to request alpha2") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 4.4: adjust filename] Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Dave Airlie authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit 76ef6b28 upstream. Since we have the ttm and gem vma managers using a subset of the file address space for objects, and these start at 0x100000000 they will overflow the new mmap checks. I've checked all the mmap routines I could see for any bad behaviour but overall most people use GEM/TTM VMA managers even the legacy drivers have a hashtable. Reported-and-Tested-by: Arthur Marsh (amarsh04 on #radeon) Fixes: be83bbf8 (mmap: introduce sane default mmap limits) Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Amir Goldstein authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit 47c7d0b1 upstream. When calling into _xfs_log_force{,_lsn}() with a pointer to log_flushed variable, log_flushed will be set to 1 if: 1. xlog_sync() is called to flush the active log buffer AND/OR 2. xlog_wait() is called to wait on a syncing log buffers xfs_file_fsync() checks the value of log_flushed after _xfs_log_force_lsn() call to optimize away an explicit PREFLUSH request to the data block device after writing out all the file's pages to disk. This optimization is incorrect in the following sequence of events: Task A Task B ------------------------------------------------------- xfs_file_fsync() _xfs_log_force_lsn() xlog_sync() [submit PREFLUSH] xfs_file_fsync() file_write_and_wait_range() [submit WRITE X] [endio WRITE X] _xfs_log_force_lsn() xlog_wait() [endio PREFLUSH] The write X is not guarantied to be on persistent storage when PREFLUSH request in completed, because write A was submitted after the PREFLUSH request, but xfs_file_fsync() of task A will be notified of log_flushed=1 and will skip explicit flush. If the system crashes after fsync of task A, write X may not be present on disk after reboot. This bug was discovered and demonstrated using Josef Bacik's dm-log-writes target, which can be used to record block io operations and then replay a subset of these operations onto the target device. The test goes something like this: - Use fsx to execute ops of a file and record ops on log device - Every now and then fsync the file, store md5 of file and mark the location in the log - Then replay log onto device for each mark, mount fs and compare md5 of file to stored value Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit 2ae89c7a upstream. In file included from scripts/kconfig/zconf.tab.c:2485: scripts/kconfig/confdata.c: In function ‘conf_write’: scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(newname, "%s%s", dirname, basename); ^~ scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes sprintf(newname, "%s%s", dirname, basename); ^~~~~~ scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097 sprintf(newname, "%s%s", dirname, basename); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~ scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097 sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Increase the size of tmpname and newname to make GCC happy. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit 423913ad upstream. Commit be83bbf8 ("mmap: introduce sane default mmap limits") was introduced to catch problems in various ad-hoc character device drivers doing mmap and getting the size limits wrong. In the process, it used "known good" limits for the normal cases of mapping regular files and block device drivers. It turns out that the "s_maxbytes" limit was less "known good" than I thought. In particular, /proc doesn't set it, but exposes one regular file to mmap: /proc/vmcore. As a result, that file got limited to the default MAX_INT s_maxbytes value. This went unnoticed for a while, because apparently the only thing that needs it is the s390 kernel zfcpdump, but there might be other tools that use this too. Vasily suggested just changing s_maxbytes for all of /proc, which isn't wrong, but makes me nervous at this stage. So instead, just make the new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't affect anything else. It wasn't the regular file case I was worried about. I'd really prefer for maxsize to have been per-inode, but that is not how things are today. Fixes: be83bbf8 ("mmap: introduce sane default mmap limits") Reported-by:
Vasily Gorbik <gor@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit be83bbf8 upstream. The internal VM "mmap()" interfaces are based on the mmap target doing everything using page indexes rather than byte offsets, because traditionally (ie 32-bit) we had the situation that the byte offset didn't fit in a register. So while the mmap virtual address was limited by the word size of the architecture, the backing store was not. So we're basically passing "pgoff" around as a page index, in order to be able to describe backing store locations that are much bigger than the word size (think files larger than 4GB etc). But while this all makes a ton of sense conceptually, we've been dogged by various drivers that don't really understand this, and internally work with byte offsets, and then try to work with the page index by turning it into a byte offset with "pgoff << PAGE_SHIFT". Which obviously can overflow. Adding the size of the mapping to it to get the byte offset of the end of the backing store just exacerbates the problem, and if you then use this overflow-prone value to check various limits of your device driver mmap capability, you're just setting yourself up for problems. The correct thing for drivers to do is to do their limit math in page indices, the way the interface is designed. Because the generic mmap code _does_ test that the index doesn't overflow, since that's what the mmap code really cares about. HOWEVER. Finding and fixing various random drivers is a sisyphean task, so let's just see if we can just make the core mmap() code do the limiting for us. Realistically, the only "big" backing stores we need to care about are regular files and block devices, both of which are known to do this properly, and which have nice well-defined limits for how much data they can access. So let's special-case just those two known cases, and then limit other random mmap users to a backing store that still fits in "unsigned long". Realistically, that's not much of a limit at all on 64-bit, and on 32-bit architectures the only worry might be the GPU drivers, which can have big physical address spaces. To make it possible for drivers like that to say that they are 64-bit clean, this patch does repurpose the "FMODE_UNSIGNED_OFFSET" bit in the file flags to allow drivers to mark their file descriptors as safe in the full 64-bit mmap address space. [ The timing for doing this is less than optimal, and this should really go in a merge window. But realistically, this needs wide testing more than it needs anything else, and being main-line is the only way to do that. So the earlier the better, even if it's outside the proper development cycle - Linus ] Cc: Kees Cook <keescook@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Chris Chiu authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit 0803d7be upstream. The Acer Acer Veriton X4110G has a TPM device detected as: tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 71) After the first S3 suspend, the following error appears during resume: tpm tpm0: A TPM error(38) occurred continue selftest Any following S3 suspend attempts will now fail with this error: tpm tpm0: Error (38) sending savestate before suspend PM: Device 00:0b failed to suspend: error 38 Error 38 is TPM_ERR_INVALID_POSTINIT which means the TPM is not in the correct state. This indicates that the platform BIOS is not sending the usual TPM_Startup command during S3 resume. >From this point onwards, all TPM commands will fail. The same issue was previously reported on Foxconn 6150BK8MC and Sony Vaio TX3. The platform behaviour seems broken here, but we should not break suspend/resume because of this. When the unexpected TPM state is encountered, set a flag to skip the affected TPM_SaveState command on later suspends. Cc: stable@vger.kernel.org Signed-off-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
Daniel Drake <drake@endlessm.com> Link: http://lkml.kernel.org/r/CAB4CAwfSCvj1cudi+MWaB5g2Z67d9DwY1o475YOZD64ma23UiQ@mail.gmail.com Link: https://lkml.org/lkml/2011/3/28/192 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591031Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Enric Balletbo i Serra authored
BugLink: https://bugs.launchpad.net/bugs/1777063 commit b5d0ebc9 upstream. The suspend/resume behavior of the TPM can be controlled by setting "powered-while-suspended" in the DTS. This is useful for the cases when hardware does not power-off the TPM. Signed-off-by:
Sonny Rao <sonnyrao@chromium.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1776177Signed-off-by:
-
David S. Miller authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 0fde7ad7 upstream. arch/sparc/kernel/ds.c: In function ‘register_services’: arch/sparc/kernel/ds.c:912:3: error: ‘strcpy’: writing at least 1 byte into a region of size 0 overflows the destination Reported-by:
Anatoly Pugachev <matorola@gmail.com> Signed-off-by:
-
Hugh Dickins authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 145e1a71 upstream. George Boole would have noticed a slight error in 4.16 commit 69d763fc ("mm: pin address_space before dereferencing it while isolating an LRU page"). Fix it, to match both the comment above it, and the original behaviour. Although anonymous pages are not marked PageDirty at first, we have an old habit of calling SetPageDirty when a page is removed from swap cache: so there's a category of ex-swap pages that are easily migratable, but were inadvertently excluded from compaction's async migration in 4.16. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils Fixes: 69d763fc ("mm: pin address_space before dereferencing it while isolating an LRU page") Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Reported-by:
Ivan Kalvachev <ikalvachev@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 4faa9996 upstream. If io_destroy() gets to cancelling everything that can be cancelled and gets to kiocb_cancel() calling the function driver has left in ->ki_cancel, it becomes vulnerable to a race with IO completion. At that point req is already taken off the list and aio_complete() does *NOT* spin until we (in free_ioctx_users()) releases ->ctx_lock. As the result, it proceeds to kiocb_free(), freing req just it gets passed to ->ki_cancel(). Fix is simple - remove from the list after the call of kiocb_cancel(). All instances of ->ki_cancel() already have to cope with the being called with iocb still on list - that's what happens in io_cancel(2). Cc: stable@kernel.org Fixes: 0460fef2 "aio: use cancellation list lazily" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Juerg Haefliger authored
BugLink: https://bugs.launchpad.net/bugs/1776177 Commit "Kbuild: change CC_OPTIMIZE_FOR_SIZE definition" adds a new config option CC_OPTIMIZE_FOR_PERFORMANCE, so update the config files accordingly. Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 877417e6 upstream. CC_OPTIMIZE_FOR_SIZE disables the often useful -Wmaybe-unused warning, because that causes a ridiculous amount of false positives when combined with -Os. This means a lot of warnings don't show up in testing by the developers that should see them with an 'allmodconfig' kernel that has CC_OPTIMIZE_FOR_SIZE enabled, but only later in randconfig builds that don't. This changes the Kconfig logic around CC_OPTIMIZE_FOR_SIZE to make it a 'choice' statement defaulting to CC_OPTIMIZE_FOR_PERFORMANCE that gets added for this purpose. The allmodconfig and allyesconfig kernels now default to -O2 with the maybe-unused warning enabled. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Michal Marek <mmarek@suse.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Ondrej Zary authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit b3fb2273 upstream. Radiant P845 does not have LVDS, only VGA. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org (cherry picked from commit 7f7105f9) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 806e3087 upstream. Commit b5e2ced9 ("stm class: Use vmalloc for the master map") caused a build error on some arches as vmalloc.h was not explicitly included. Fix that by adding it to the list of includes. Fixes: b5e2ced9 ("stm class: Use vmalloc for the master map") Reported-by:
kbuild test robot <lkp@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit b5e2ced9 upstream. Fengguang is running into a warning from the buddy allocator: > swapper/0: page allocation failure: order:9, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null) > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc1 #262 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 > Call Trace: ... > __kmalloc+0x14b/0x180: ____cache_alloc at mm/slab.c:3127 > stm_register_device+0xf3/0x5c0: stm_register_device at drivers/hwtracing/stm/core.c:695 ... Which is basically a result of the stm class trying to allocate ~512kB for the dummy_stm with its default parameters. There's no reason, however, for it not to be vmalloc()ed instead, which is what this patch does. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> CC: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit c9ddf734 upstream. Since an SRP remote port is attached as a child to shost->shost_gendev and as the only child, the translation from the shost pointer into an rport pointer must happen by looking up the shost child that is an rport. This patch fixes the following KASAN complaint: BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp] Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19 CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 srp_timed_out+0x57/0x110 [scsi_transport_srp] scsi_times_out+0xc7/0x3f0 [scsi_mod] blk_mq_terminate_expired+0xc2/0x140 bt_iter+0xbc/0xd0 blk_mq_queue_tag_busy_iter+0x1c7/0x350 blk_mq_timeout_work+0x325/0x3f0 process_one_work+0x441/0xa50 worker_thread+0x76/0x6c0 kthread+0x1b2/0x1d0 ret_from_fork+0x24/0x30 Fixes: e68ca752 ("scsi_transport_srp: Reduce failover time") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 28e4213d upstream. Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e. Status.FR) is not supported as the lone purpose of Config5.FRE is to emulate Status.FR=0 handling on FPU hardware that has Status.FR=1 hardwired[1][2]. Also we do not handle this case elsewhere, and assume throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot be set both at once for a task, leading to inconsistent behaviour if this does happen. Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to modes allowed by `mips_set_personality_fp'. References: [1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69 "Config5 Register Field Descriptions", p. 262 [2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00091, Revision 6.03, December 22, 2015, Table 9.72 "Config5 Register Field Descriptions", p. 288 Fixes: 9791554b ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/19327/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit c7e81462 upstream. Use 64-bit accesses for 64-bit floating-point general registers with PTRACE_PEEKUSR, removing the truncation of their upper halves in the FR=1 mode, caused by commit bbd426f5 ("MIPS: Simplify FP context access"), which inadvertently switched them to using 32-bit accesses. The PTRACE_POKEUSR side is fine as it's never been broken and continues using 64-bit accesses. Fixes: bbd426f5 ("MIPS: Simplify FP context access") Signed-off-by:
-
Martin Kelly authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 3d13de4b upstream. Currently, the following causes a kernel OOPS in memcpy: echo 1073741825 > buffer/length echo 1 > buffer/enable Note that using 1073741824 instead of 1073741825 causes "write error: Cannot allocate memory" but no OOPS. This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo rounds up to the nearest power of 2, it will actually call kmalloc with roundup_pow_of_two(length) * bytes_per_datum. Using length == 1073741825 and bytes_per_datum == 2, we get: kmalloc(roundup_pow_of_two(1073741825) * 2 or kmalloc(2147483648 * 2) or kmalloc(4294967296) or kmalloc(UINT_MAX + 1) so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and subsequent memcpy to fail once the device is enabled. Fix this by checking for overflow prior to allocating a kfifo. With this check added, the above code returns -EINVAL when enabling the buffer, rather than causing an OOPS. Signed-off-by:
Martin Kelly <mkelly@xevo.com> cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Yoshihiro Shimoda authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit d9f5efad upstream. This patch fixes an issue that list_for_each_entry() in usb_dmac_chan_terminate_all() is possible to cause endless loop because this will move own desc to the desc_freed. So, this driver should use list_for_each_entry_safe() instead of list_for_each_entry(). Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 52df445f upstream. If we don't clear START generation as soon as possible, it may cause another message to be generated, e.g. when receiving NACK in address phase. To keep the race window as small as possible, we clear it right at the beginning of the interrupt. We don't need any checks since we always want to stop START and STOP generation on the next occasion after we started it. This patch improves the situation but sadly does not completely fix it. It is still to be researched if we can do better given this HW design. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit c3be0af1 upstream. Due to the HW design, master IRQs are timing critical, so give them precedence over slave IRQ. Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit d89667b1 upstream. The manual says (55.4.8.6) that HW does automatically send STOP after NACK was received. My measuerments confirm that. Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit cc21d0b4 upstream. Setting up new messages was done in process context while handling a message was in interrupt context. Because of the HW design, this IP core is sensitive to timing, so the context switches were too expensive. Move this setup to interrupt context as well. In my test setup, this fixed the occasional 'data byte sent twice' issue which a number of people have seen. It also fixes to send REP_START after a read message which was wrongly send as a STOP + START sequence before. Signed-off-by:
Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit b9d0684c upstream. We want to reuse this function later. Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit ff2316b8 upstream. After making sure to reinit the HW and clear interrupts in the timeout case, we know that interrupts are always disabled in the sections protected by the spinlock. Thus, we can simply remove it which is a preparation for further refactoring. While here, rename the timeout variable to time_left which is way more readable. Signed-off-by:
-
