- 25 May, 2018 14 commits
-
-
Mathieu Malaterre authored
Add a missing prototype for function `note_bootable_part` to silence a warning treated as error with W=1: arch/powerpc/platforms/powermac/setup.c:361:12: error: no previous prototype for ‘note_bootable_part’ [-Werror=missing-prototypes] Suggested-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Mathieu Malaterre authored
The pmac_pfunc_base_install prototype was declared in powermac/smp.c since function was used there, move it to pmac_pfunc.h header to be visible in pfunc_base.c. Fix a warning treated as error with W=1: arch/powerpc/platforms/powermac/pfunc_base.c:330:12: error: no previous prototype for ‘pmac_pfunc_base_install’ [-Werror=missing-prototypes] Suggested-by:
-
Mathieu Malaterre authored
These functions can all be static, make it so. Fix warnings treated as errors with W=1: arch/powerpc/platforms/chrp/pci.c:34:5: error: no previous prototype for ‘gg2_read_config’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/pci.c:61:5: error: no previous prototype for ‘gg2_write_config’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/pci.c:97:5: error: no previous prototype for ‘rtas_read_config’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/pci.c:112:5: error: no previous prototype for ‘rtas_write_config’ [-Werror=missing-prototypes] Signed-off-by:
-
Mathieu Malaterre authored
Since the value of x is never intended to be read, declare it with gcc attribute as unused. Fix warning treated as error with W=1: arch/powerpc/platforms/powermac/bootx_init.c:471:21: error: variable ‘x’ set but not used [-Werror=unused-but-set-variable] Suggested-by:
-
Mathieu Malaterre authored
Remove variable declaration idu_size and associated code since not used. These functions can all be static, make it so. Fix warnings treated as errors with W=1: arch/powerpc/platforms/chrp/setup.c:97:6: error: no previous prototype for ‘chrp_show_cpuinfo’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/setup.c:302:13: error: no previous prototype for ‘chrp_setup_arch’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/setup.c:385:16: error: variable ‘idu_size’ set but not used [-Werror=unused-but-set-variable] arch/powerpc/platforms/chrp/setup.c:526:13: error: no previous prototype for ‘chrp_init_IRQ’ [-Werror=missing-prototypes] arch/powerpc/platforms/chrp/setup.c:559:1: error: no previous prototype for ‘chrp_init2’ [-Werror=missing-prototypes] Suggested-by:
-
Mathieu Malaterre authored
The function hlwd_pic_init can be made static, so do it. Fix the following warning treated as error (W=1): ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:158:20: error: no previous prototype for ‘hlwd_pic_init’ [-Werror=missing-prototypes] Signed-off-by:
-
Mathieu Malaterre authored
In commit 7a22d632 ("powerpc/mm/radix: Update command line parsing for disable_radix") an `if` statement was added for a possible empty body (prom_debug). Fix the following warning, treated as error with W=1: arch/powerpc/kernel/prom_init.c:656:46: error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body] Suggested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Mathieu Malaterre authored
Trivial fix to remove the following sparse warnings: arch/powerpc/kernel/module_32.c:112:74: warning: Using plain integer as NULL pointer arch/powerpc/kernel/module_32.c:117:74: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1155:28: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1230:20: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1385:36: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1752:23: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2084:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2110:32: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2167:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2183:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:277:20: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:155:67: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:247:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:249:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:252:37: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:127:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:148:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:44:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:57:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:87:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:160:31: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:167:22: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:274:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:285:31: warning: Using plain integer as NULL pointer arch/powerpc/include/asm/hugetlb.h:204:16: warning: Using plain integer as NULL pointer arch/powerpc/mm/ppc_mmu_32.c:170:21: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:1227:23: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:65:24: warning: Using plain integer as NULL pointer Also use `--fix` command line option from `script/checkpatch --strict` to remove the following: CHECK: Comparison to NULL could be written "!dispDeviceBase" #72: FILE: arch/powerpc/kernel/btext.c:160: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "!vbase" #80: FILE: arch/powerpc/kernel/btext.c:167: + if (vbase == NULL) CHECK: Comparison to NULL could be written "!base" #89: FILE: arch/powerpc/kernel/btext.c:274: + if (base == NULL) CHECK: Comparison to NULL could be written "!dispDeviceBase" #98: FILE: arch/powerpc/kernel/btext.c:285: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "strstr" #117: FILE: arch/powerpc/kernel/module_32.c:117: + if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != NULL) CHECK: Comparison to NULL could be written "!Hash" #130: FILE: arch/powerpc/mm/ppc_mmu_32.c:170: + if (Hash == NULL) CHECK: Comparison to NULL could be written "Hash" #143: FILE: arch/powerpc/mm/tlb_hash32.c:44: + if (Hash != NULL) { CHECK: Comparison to NULL could be written "!Hash" #152: FILE: arch/powerpc/mm/tlb_hash32.c:57: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #161: FILE: arch/powerpc/mm/tlb_hash32.c:87: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #170: FILE: arch/powerpc/mm/tlb_hash32.c:127: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #179: FILE: arch/powerpc/mm/tlb_hash32.c:148: + if (Hash == NULL) { ERROR: space required after that ';' (ctx:VxV) #192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "node" #192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "!region" #201: FILE: arch/powerpc/platforms/powermac/pci.c:1227: + if (region == NULL) CHECK: Comparison to NULL could be written "of_get_property" #214: FILE: arch/powerpc/platforms/powermac/setup.c:155: + if (of_get_property(np, "cache-unified", NULL) != NULL && dc) { CHECK: Comparison to NULL could be written "!np" #223: FILE: arch/powerpc/platforms/powermac/setup.c:247: + if (np == NULL) CHECK: Comparison to NULL could be written "np" #226: FILE: arch/powerpc/platforms/powermac/setup.c:249: + if (np != NULL) { CHECK: Comparison to NULL could be written "l2cr" #230: FILE: arch/powerpc/platforms/powermac/setup.c:252: + if (l2cr != NULL) { CHECK: Comparison to NULL could be written "via" #243: FILE: drivers/macintosh/via-pmu.c:277: + if (via != NULL) CHECK: Comparison to NULL could be written "current_req" #252: FILE: drivers/macintosh/via-pmu.c:1155: + if (current_req != NULL) { CHECK: Comparison to NULL could be written "!req" #261: FILE: drivers/macintosh/via-pmu.c:1230: + if (req == NULL || pmu_state != idle CHECK: Comparison to NULL could be written "!req" #270: FILE: drivers/macintosh/via-pmu.c:1385: + if (req == NULL) { CHECK: Comparison to NULL could be written "!pp" #288: FILE: drivers/macintosh/via-pmu.c:2084: + if (pp == NULL) CHECK: Comparison to NULL could be written "!pp" #297: FILE: drivers/macintosh/via-pmu.c:2110: + if (count < 1 || pp == NULL) CHECK: Comparison to NULL could be written "!pp" #306: FILE: drivers/macintosh/via-pmu.c:2167: + if (pp == NULL) CHECK: Comparison to NULL could be written "pp" #315: FILE: drivers/macintosh/via-pmu.c:2183: + if (pp != NULL) { Link: https://github.com/linuxppc/linux/issues/37Signed-off-by: -
Mathieu Malaterre authored
Some functions prototypes were missing for the non-altivec code. Add the missing prototypes in a new header file, fix warnings treated as errors with W=1: arch/powerpc/lib/xor_vmx_glue.c:18:6: error: no previous prototype for ‘xor_altivec_2’ [-Werror=missing-prototypes] arch/powerpc/lib/xor_vmx_glue.c:29:6: error: no previous prototype for ‘xor_altivec_3’ [-Werror=missing-prototypes] arch/powerpc/lib/xor_vmx_glue.c:40:6: error: no previous prototype for ‘xor_altivec_4’ [-Werror=missing-prototypes] arch/powerpc/lib/xor_vmx_glue.c:52:6: error: no previous prototype for ‘xor_altivec_5’ [-Werror=missing-prototypes] The prototypes were already present in <asm/xor.h> but this header file is meant to be included after <include/linux/raid/xor.h>. Trying to re-use <asm/xor.h> directly would lead to warnings such as: arch/powerpc/include/asm/xor.h:39:15: error: variable ‘xor_block_altivec’ has initializer but incomplete type Trying to re-use <asm/xor.h> after <include/linux/raid/xor.h> in xor_vmx_glue.c would in turn trigger the following warnings: include/asm-generic/xor.h:688:34: error: ‘xor_block_32regs’ defined but not used [-Werror=unused-variable] Signed-off-by:
-
Mathieu Malaterre authored
__printf is useful to verify format and arguments. Fix arg mismatch reported by gcc, remove the following warnings (with W=1): arch/powerpc/kernel/prom_init.c:1467:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1471:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1504:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1505:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1506:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1507:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1508:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1509:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1975:39: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ arch/powerpc/kernel/prom_init.c:1986:27: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2567:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2567:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2569:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2569:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’ The patch also include arg mismatch fix for case with #define DEBUG_PROM (warning not listed here). This patch fix also the following warnings revealed by checkpatch: WARNING: Prefer using '"%s...", __func__' to using 'alloc_up', this function's name, in a string #101: FILE: arch/powerpc/kernel/prom_init.c:1235: + prom_debug("alloc_up(%lx, %lx)\n", size, align); and WARNING: Prefer using '"%s...", __func__' to using 'alloc_down', this function's name, in a string #138: FILE: arch/powerpc/kernel/prom_init.c:1278: + prom_debug("alloc_down(%lx, %lx, %s)\n", size, align, Signed-off-by: -
Michael Ellerman authored
The set of paca fields we dump in xmon has gotten somewhat out of date. Update to add some recently added fields. Signed-off-by: -
Michael Ellerman authored
We've added some fields with longer names since we originally wrote this, so the fields are no longer lined up. Adjust the widths to make it all look nice again, eg: 0:mon> dp paca for cpu 0x0 @ c000000001fa0000: possible = yes ... slb_shadow [0] = 0xc000000008000000 0x400ea1b217000500 slb_shadow [1] = 0xd000000008000001 0x400d43642f000510 ... rfi_flush_fallback_area = c0000000fff80000 (0xcc8) ... accounting.starttime_user = 0x51582f07 (0xae8) Signed-off-by: -
Mathieu Malaterre authored
This allows the compiler to verify the format strings vs the types of the arguments. Update the other prototype declarations in asm/xmon.h. Silence warnings (triggered at W=1) by adding relevant __printf attribute. Move #define at bottom of the file to prevent conflict with gcc attribute. Solves the original warning: arch/powerpc/xmon/nonstdio.c:178:2: error: function might be possible candidate for ‘gnu_printf’ format attribute In turn this uncovered many formatting errors in xmon.c, all fixed in this patch. Signed-off-by:
-
Michael Ellerman authored
In dump_one_paca() the DUMP macro unconditionally prepends '#' to the printf format specifier. In most cases we're using either 'x' or 'lx' etc. and that is OK. But for 'p' and other formats using '#' is actually undefined, and once we enable printf() checking for xmon_printf() we will get warnings from the compiler. So just have each usage specify the full format, that way we can omit '#' when it's inappropriate. Signed-off-by:
-
- 24 May, 2018 6 commits
-
-
Michal Suchanek authored
When single-stepping kernel code from xmon without a debug hook enabled the kernel crashes. This can happen when kernel starts with xmon on crash disabled but xmon is entered using sysrq. Call force_enable_xmon when single-stepping in xmon to install the xmon debug hooks. Fixes: e1368d0c ("powerpc/xmon: Setup debugger hooks when first break-point is set") Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Reviewed-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by:
-
Christophe Leroy authored
New binutils generate the following warning AS arch/powerpc/kernel/head_8xx.o arch/powerpc/kernel/head_8xx.S: Assembler messages: arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression This patch fixes it. Signed-off-by:
-
Michael Neuling authored
This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and PPC_PTRACE_SETHWDEBUG. This test was use to find the bugs fixed by these recent commits: 4f7c06e2 powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG cd6ef7ee powerpc/ptrace: Fix enforcement of DAWR constraints Signed-off-by:
Michael Neuling <mikey@neuling.org> [mpe: Add SPDX tag, clang format it] Signed-off-by:
-
Michael Neuling authored
Signed-off-by:
-
Christophe Leroy authored
Commit a7a9dcd8 ("powerpc: Avoid taking a data miss on every userspace instruction miss") has shown that limiting the read of faulting instruction to likely cases improves performance. This patch goes further into this direction by limiting the read of the faulting instruction to the only cases where it is likely needed. On an MPC885, with the same benchmark app as in the commit referred above, we see a reduction of about 3900 dTLB misses (approx 3%): Before the patch: Performance counter stats for './fault 500' (10 runs): 683033312 cpu-cycles ( +- 0.03% ) 134538 dTLB-load-misses ( +- 0.03% ) 46099 iTLB-load-misses ( +- 0.02% ) 19681 faults ( +- 0.02% ) 5.389747878 seconds time elapsed ( +- 0.06% ) With the patch: Performance counter stats for './fault 500' (10 runs): 682112862 cpu-cycles ( +- 0.03% ) 130619 dTLB-load-misses ( +- 0.03% ) 46073 iTLB-load-misses ( +- 0.05% ) 19681 faults ( +- 0.01% ) 5.381342641 seconds time elapsed ( +- 0.07% ) The proper work of the huge stack expansion was tested with the following app: int main(int argc, char **argv) { char buf[1024 * 1025]; sprintf(buf, "Hello world !\n"); printf(buf); exit(0); } Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> [mpe: Add include of pagemap.h to fix build errors] Signed-off-by:
-
Christophe Leroy authored
Use symbolic names defined in asm/ppc-opcode.h instead of hardcoded values. Signed-off-by:
-
- 21 May, 2018 7 commits
-
-
Shilpasri G Bhat authored
This patch exports the accumulated power numbers of each power sensor maintained by OCC. Signed-off-by:
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Shilpasri G Bhat authored
The firmware has supported for reading sensor values of size u32. This patch adds support to use newer firmware functions which allows to read the sensors of size u64. Signed-off-by:
-
Shilpasri G Bhat authored
This patch adds support to read 64-bit sensor values. This method is used to read energy sensors and counters which are of type u64. Signed-off-by:
-
Michael Neuling authored
Paste on POWER9 only works on accelerators and no longer on real memory. Hence this test is broken so remove it. Signed-off-by:
-
Peter Rosin authored
The sanctioned compatible is "nxp,pca9547". Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Michael Neuling authored
In commit e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") we fixed setting the DAWR end point to its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint. PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to zero (memset() in hw_breakpoint_init()). This worked with arch_validate_hwbkpt_settings() before the above patch was applied but is now broken if the breakpoint is 512byte aligned. This sets the length of the breakpoint to 8 bytes when using PTRACE_SET_DEBUGREG. Fixes: e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by:
-
Michael Neuling authored
Back when we first introduced the DAWR, in commit 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges"), we screwed up the constraint making it a 1024 byte boundary rather than a 512. This makes the check overly permissive. Fortunately GDB is the only real user and it always did they right thing, so we never noticed. This fixes the constraint to 512 bytes. Fixes: 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
-
- 18 May, 2018 6 commits
-
-
Michael Ellerman authored
This allows us to squash some sparse warnings and also avoids having to do explicity endian conversions in the code. Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com>
-
Michael Ellerman authored
This allows us to squash some sparse warnings and also avoids having to do explicity endian conversions in the code. Signed-off-by:
-
Michael Ellerman authored
Add byte-swapping versions of __raw_writeq() and __raw_rm_writeq(). This allows us to avoid sparse warnings caused by passing __be64 to __raw_writeq(), which takes unsigned long: arch/powerpc/platforms/powernv/pci-ioda.c:1981:38: warning: incorrect type in argument 1 (different base types) expected unsigned long [unsigned] v got restricted __be64 [usertype] <noident> It's also generally preferable to use a byte-swapping accessor rather than doing it by hand in the code, which is more bug prone. Signed-off-by: -
Anju T Sudhakar authored
Currently memory is allocated for core-imc based on cpu_present_mask, which has bit 'cpu' set iff cpu is populated. We use (cpu number / threads per core) as the array index to access the memory. Under some circumstances firmware marks a CPU as GUARDed CPU and boot the system, until cleared of errors, these CPU's are unavailable for all subsequent boots. GUARDed CPUs are possible but not present from linux view, so it blows a hole when we assume the max length of our allocation is driven by our max present cpus, where as one of the cpus might be online and be beyond the max present cpus, due to the hole. So (cpu number / threads per core) value bounds the array index and leads to memory overflow. Call trace observed during a guard test: Faulting instruction address: 0xc000000000149f1c cpu 0x69: Vector: 380 (Data Access Out of Range) at [c000003fea303420] pc:c000000000149f1c: prefetch_freepointer+0x14/0x30 lr:c00000000014e0f8: __kmalloc+0x1a8/0x1ac sp:c000003fea3036a0 msr:9000000000009033 dar:c9c54b2c91dbf6b7 current = 0xc000003fea2c0000 paca = 0xc00000000fddd880 softe: 3 irq_happened: 0x01 pid = 1, comm = swapper/104 Linux version 4.16.7-openpower1 (smc@smc-desktop) (gcc version 6.4.0 (Buildroot 2018.02.1-00006-ga8d1126)) #2 SMP Fri May 4 16:44:54 PDT 2018 enter ? for help call trace: __kmalloc+0x1a8/0x1ac (unreliable) init_imc_pmu+0x7f4/0xbf0 opal_imc_counters_probe+0x3fc/0x43c platform_drv_probe+0x48/0x80 driver_probe_device+0x22c/0x308 __driver_attach+0xa0/0xd8 bus_for_each_dev+0x88/0xb4 driver_attach+0x2c/0x40 bus_add_driver+0x1e8/0x228 driver_register+0xd0/0x114 __platform_driver_register+0x50/0x64 opal_imc_driver_init+0x24/0x38 do_one_initcall+0x150/0x15c kernel_init_freeable+0x250/0x254 kernel_init+0x1c/0x150 ret_from_kernel_thread+0x5c/0xc8 Allocating memory for core-imc based on cpu_possible_mask, which has bit 'cpu' set iff cpu is populatable, will fix this issue. Reported-by:Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Tested-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in battery_charging array. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Finn Thain authored
My powerpc-linux-gnu-gcc v4.4.5 compiler can't build a 32-bit kernel any more: arch/powerpc/lib/sstep.c: In function 'do_popcnt': arch/powerpc/lib/sstep.c:1068: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1070: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1079: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c: In function 'do_prty': arch/powerpc/lib/sstep.c:1117: error: integer constant is too large for 'long' type This file gets compiled with -std=gnu89 which means a constant can be given the type 'long' even if it won't fit. Fix the errors with a 'ULL' suffix on the relevant constants. Fixes: 2c979c48 ("powerpc/lib/sstep: Add prty instruction emulation") Fixes: dcbd19b4 ("powerpc/lib/sstep: Add popcnt instruction emulation") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
- 17 May, 2018 5 commits
-
-
Nicholas Piggin authored
A kernel crash in process context that calls emergency_restart from panic will end up calling opal_event_shutdown with interrupts disabled but not in interrupt. This causes a sleeping function to be called which gives the following warning with sysrq+c: Rebooting in 10 seconds.. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 in_atomic(): 0, irqs_disabled(): 1, pid: 7669, name: bash CPU: 20 PID: 7669 Comm: bash Tainted: G D W 4.17.0-rc5+ #3 Call Trace: dump_stack+0xb0/0xf4 (unreliable) ___might_sleep+0x174/0x1a0 mutex_lock+0x38/0xb0 __free_irq+0x68/0x460 free_irq+0x70/0xc0 opal_event_shutdown+0xb4/0xf0 opal_shutdown+0x24/0xa0 pnv_shutdown+0x28/0x40 machine_shutdown+0x44/0x60 machine_restart+0x28/0x80 emergency_restart+0x30/0x50 panic+0x2a0/0x328 oops_end+0x1ec/0x1f0 bad_page_fault+0xe8/0x154 handle_page_fault+0x34/0x38 --- interrupt: 300 at sysrq_handle_crash+0x44/0x60 LR = __handle_sysrq+0xfc/0x260 flag_spec.62335+0x12b844/0x1e8db4 (unreliable) __handle_sysrq+0xfc/0x260 write_sysrq_trigger+0xa8/0xb0 proc_reg_write+0xac/0x110 __vfs_write+0x6c/0x240 vfs_write+0xd0/0x240 ksys_write+0x6c/0x110 Fixes: 9f0fd049 ("powerpc/powernv: Add a virtual irqchip for opal events") Signed-off-by: -
Christophe Leroy authored
arch/powerpc/Makefile activates -mmultiple on BE PPC32 configs in order to use multiple word instructions in functions entry/exit. The patch does the same for the asm parts, for consistency. On processors like the 8xx on which insn fetching is pretty slow, this speeds up registers save/restore. Signed-off-by:
-
Christophe Leroy authored
Doing the test at exit of the function avoids an unnecessary test and branch inside longjmp(). Semantics are unchanged. Signed-off-by:
-
Christophe Leroy authored
This reverts commit 6ad966d7. That commit was pointless, because csum_add() sums two 32 bits values, so the sum is 0x1fffffffe at the maximum. And then when adding upper part (1) and lower part (0xfffffffe), the result is 0xffffffff which doesn't carry. Any lower value will not carry either. And behind the fact that this commit is useless, it also kills the whole purpose of having an arch specific inline csum_add() because the resulting code gets even worse than what is obtained with the generic implementation of csum_add() 0000000000000240 <.csum_add>: 240: 38 00 ff ff li r0,-1 244: 7c 84 1a 14 add r4,r4,r3 248: 78 00 00 20 clrldi r0,r0,32 24c: 78 89 00 22 rldicl r9,r4,32,32 250: 7c 80 00 38 and r0,r4,r0 254: 7c 09 02 14 add r0,r9,r0 258: 78 09 00 22 rldicl r9,r0,32,32 25c: 7c 00 4a 14 add r0,r0,r9 260: 78 03 00 20 clrldi r3,r0,32 264: 4e 80 00 20 blr In comparison, the generic implementation of csum_add() gives: 0000000000000290 <.csum_add>: 290: 7c 63 22 14 add r3,r3,r4 294: 7f 83 20 40 cmplw cr7,r3,r4 298: 7c 10 10 26 mfocrf r0,1 29c: 54 00 ef fe rlwinm r0,r0,29,31,31 2a0: 7c 60 1a 14 add r3,r0,r3 2a4: 78 63 00 20 clrldi r3,r3,32 2a8: 4e 80 00 20 blr And the reverted implementation for PPC64 gives: 0000000000000240 <.csum_add>: 240: 7c 84 1a 14 add r4,r4,r3 244: 78 80 00 22 rldicl r0,r4,32,32 248: 7c 80 22 14 add r4,r0,r4 24c: 78 83 00 20 clrldi r3,r4,32 250: 4e 80 00 20 blr Fixes: 6ad966d7 ("powerpc/64: Fix checksum folding in csum_add()") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Christophe Leroy authored
PMD_PAGE_SIZE() is nowhere used and _PMD_SIZE is only used by PMD_PAGE_SIZE(). This patch removes them. Signed-off-by:
-
- 15 May, 2018 2 commits
-
-
Jonathan Neuschäfer authored
The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/miniSigned-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Jonathan Neuschäfer authored
On the Wii, there is a secondary IRQ controller (hlwd-pic), so flipper-pic's match operation should not be hardcoded to return 1. In fact, the default matching logic is sufficient, and we can completely omit flipper_pic_match. Signed-off-by:
-
