Add a bpf_check_basics_ok() and reject filters that are of invalid
size much earlier, so we don't do any useless work such as invoking
bpf_prog_alloc(). Currently, rejection happens in bpf_check_classic()
only, but it's really unnecessarily late and they should be rejected
at earliest point. While at it, also clean up one bpf_prog_size() to
make it consistent with the remaining invocations.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Respect the stack's xmit_recursion limit for calls into dev_queue_xmit().
Currently, they are not handeled by the limiter when attached to clsact's
egress parent, for example, and a buggy program redirecting it to the
same device again could run into stack overflow eventually. It would be
good if we could notify an admin to give him a chance to react. We reuse
xmit_recursion instead of having one private to eBPF, so that the stack's
current recursion depth will be taken into account as well. Follow-up to
commit 3896d655 ("bpf: introduce bpf_clone_redirect() helper") and
27b29f63 ("bpf: add bpf_redirect() helper").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds a new OVS action, OVS_ACTION_ATTR_TRUNC, in order to
truncate packets. A 'max_len' is added for setting up the maximum
packet size, and a 'cutlen' field is to record the number of bytes
to trim the packet when the packet is outputting to a port, or when
the packet is sent to userspace.
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	net/sched/act_police.c
	net/sched/sch_drr.c
	net/sched/sch_hfsc.c
	net/sched/sch_prio.c
	net/sched/sch_red.c
	net/sched/sch_tbf.c

In net-next the drop methods of the packet schedulers got removed, so
the bug fixes to them in 'net' are irrelevant.

A packet action unload crash fix conflicts with the addition of the
new firstuse timestamp.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal.

 2) Revert some msleep conversions in rtlwifi as these spots are in
    atomic context, from Larry Finger.

 3) Validate that NFTA_SET_TABLE attribute is actually specified when we
    call nf_tables_getset().  From Phil Turnbull.

 4) Don't do mdio_reset in stmmac driver with spinlock held as that can
    sleep, from Vincent Palatin.

 5) sk_filter() does things other than run a BPF filter, so we should
    not elide it's call just because sk->sk_filter is NULL.  Fix from
    Eric Dumazet.

 6) Fix missing backlog updates in several packet schedulers, from Cong
    Wang.

 7) bnx2x driver should allow VLAN add/remove while the interface is
    down, from Michal Schmidt.

 8) Several RDS/TCP race fixes from Sowmini Varadhan.

 9) fq_codel scheduler doesn't return correct queue length in dumps,
    from Eric Dumazet.

10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from
    Yuchung Cheng.

11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(),
    from Guillaume Nault.

12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian
    Westphal.

13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling,
    from Willem de Bruijn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
  vmxnet3: segCnt can be 1 for LRO packets
  packet: compat support for sock_fprog
  stmmac: fix parameter to dwmac4_set_umac_addr()
  net/mlx5e: Fix blue flame quota logic
  net/mlx5e: Use ndo_stop explicitly at shutdown flow
  net/mlx5: E-Switch, always set mc_promisc for allmulti vports
  net/mlx5: E-Switch, Modify node guid on vf set MAC
  net/mlx5: E-Switch, Fix vport enable flow
  net/mlx5: E-Switch, Use the correct error check on returned pointers
  net/mlx5: E-Switch, Use the correct free() function
  net/mlx5: Fix E-Switch flow steering capabilities check
  net/mlx5: Fix flow steering NIC capabilities check
  net/mlx5: Fix root flow table update
  net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
  net/mlx5: Fix masking of reserved bits in XRCD number
  net/mlx5: Fix the size of modify QP mailbox
  mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
  mlxsw: spectrum: Make split flow match firmware requirements
  wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
  cfg80211: remove get/set antenna and tx power warnings
  ...

Pull sound fixes from Takashi Iwai:
 "We have only few, mainly HD-audio device-specific fixes.  Realtek
  codec driver got a slightly more LOC, but they are all for the new
  codec chip, and won't affect others at all"

* tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add PCI ID for Kabylake
  ALSA: hda/realtek: Add T560 docking unit fixup
  ALSA: hda - Fix headset mic detection problem for Dell machine
  ALSA: uapi: Add three missing header files to Kbuild file
  ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
  ALSA: hda/realtek - ALC256 speaker noise issue

Pull drm fixes from Dave Airlie:
 "This weeks instalment of fixes:

  amdgpu:
     Lots of memory leak and firmware leak fixes

  nouveau:
     Collection of display fixes, KASAN fixes

  vc4:
     vblank/pageflipping fixes

  fsl-dcu:
     Regmap cache fix

  omap:
     Unused variable warning fix.

  Nothing too surprising so far"

* tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits)
  drm/amdgpu: fix warning with powerplay disabled.
  drm/amd/powerplay: delete useless code as pptable changed in vbios.
  drm/amd/powerplay: fix bug visit array out of bounds
  drm/amdgpu: fix smu ucode memleak (v2)
  drm/amdgpu: add release firmware for cgs
  drm/amdgpu: fix tonga smu_fini mem leak
  drm/amdgpu: fix fiji smu fini mem leak
  drm/amdgpu: fix cik sdma ucode memleak
  drm/amdgpu: fix sdma24 ucode mem leak
  drm/amdgpu: fix sdma3 ucode mem leak
  drm/amdgpu: fix uvd fini mem leak
  drm/amdgpu: fix gfx 7 ucode mem leak
  drm/amdgpu: fix gfx8 ucode mem leak
  drm/amdgpu: fix missing free wb for cond_exec
  drm/amdgpu: fix memleak in pptable_init
  drm/amdgpu: fix mem leak in atombios
  drm/amdgpu: fix mem leak in pplib/hwmgr
  drm/amdgpu: fix mem leak in smumgr
  drm/amdgpu: add pipeline sync while vmid switch in same ctx
  drm/amdgpu: vBIOS post only call when mem_size zero
  ...

Pull ACPI fix from Rafael Wysocki:
 "A recently introduced boot regression related to the ACPI EC
  initialization is addressed by restoring the previous behavior (Lv
  Zheng)"

* tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC

Pull power management fixes from Rafael Wysocki:
 "Stable-candidate fixes for the intel_pstate driver and the cpuidle
  core.

  Specifics:

   - Fix two intel_pstate initialization issues, one of which was
     introduced during the 4.4 cycle (Srinivas Pandruvada)

   - Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset
     (Catalin Marinas)"

* tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
  cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
  cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/fadvise.c: do not discard partial pages with POSIX_FADV_DONTNEED
  mm: introduce dedicated WQ_MEM_RECLAIM workqueue to do lru_add_drain_all
  kernel/relay.c: fix potential memory leak
  mm: thp: broken page count after commit aa88b68c
  revert "mm: memcontrol: fix possible css ref leak on oom"
  kasan: change memory hot-add error messages to info messages
  mm/hugetlb: fix huge page reserve accounting for private mappings

The device emulation may send segCnt of 1 for LRO packets.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: Jin Heo <heoj@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

alloc_workqueue replaces deprecated create_workqueue().

A dedicated workqueue has been used since the workqueue
mlxsw_wq is used for FDB notif. processing with workitems that are
involved in normal device operation && because it's a network device
which can be depended upon during memory reclaim.

Workitems &trans->timeout_dw and &mlxsw_sp->fdb_notify.dw,
map to mlxsw_sp_fdb_notify_work (processes FDB notifications from the
underlying device and resolves the netdev to which the entry points to
and notifies the bridge using the switchdev notifier) and
mlxsw_emad_trans_timeout_work (provides async EMAD register access)
respectively. They require forward progress under memory pressure and
hence, WQ_MEM_RECLAIM has been set.

Since there are only a fixed number of work items, explicit concurrency
limit is unnecessary here.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

alloc_workqueue replaces deprecated create_workqueue().

A dedicated workqueue has been used since the workitem viz
(&lio->txq_status_wq.wk.work which maps to octnet_poll_check_txq_status)
is involved in a brief poll routine for checking transmit queue status
and is an intergral part of normal device operation.
WQ_MEM_RECLAIM has been set to guarantee forward progress under memory
pressure, which is a requirement here.
Since there are only a fixed number of work items, explicit concurrency
limit is unnecessary.

flush_workqueue is unnecessary since destroy_workqueue() itself calls
drain_workqueue() which flushes repeatedly till the workqueue
becomes empty.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Socket option PACKET_FANOUT_DATA takes a struct sock_fprog as argument
if PACKET_FANOUT has mode PACKET_FANOUT_CBPF. This structure contains
a pointer into user memory. If userland is 32-bit and kernel is 64-bit
the two disagree about the layout of struct sock_fprog.

Add compat setsockopt support to convert a 32-bit compat_sock_fprog to
a 64-bit sock_fprog. This is analogous to compat_sock_fprog support for
SO_REUSEPORT added in commit 19575988 ("soreuseport: add compat
case for setsockopt SO_ATTACH_REUSEPORT_CBPF").
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx4 RSS is limited to spread incoming packets to a power of two number
of queues.

An uniformly distibuted traffic would be split on queues 0 to N-1, N
being a power of two, each queue having a 1/N weight.

If number of RX queues is not a power of two, upper RX queues do not
receive traffic.

ethtool -x is lying, because it pretends some queues have higher weight.

Before patch:

lpaa24:~# ethtool -L eth1 rx 24
lpaa24:~# ethtool -x eth1
RX flow hash indirection table for eth1 with 24 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
   16:      0     1     2     3     4     5     6     7
RSS hash key:
e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6

If this information was correct, user space tools could expect queues 0
to 7 to receive twice more traffic than queues 8 to 15

After patch :

lpaa24:~# ethtool -L eth1 rx 24
lpaa24:~# ethtool -x eth1
RX flow hash indirection table for eth1 with 24 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
RSS hash key:
da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce
lpaa24:~# ethtool -X eth1 equal 8
lpaa24:~# ethtool -x eth1
RX flow hash indirection table for eth1 with 24 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      0     1     2     3     4     5     6     7
RSS hash key:
da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dwmac4_set_umac_addr() takes a struct mac_device_info as
the first parameter, but is being passed a ioaddr instead from
dwmac4_set_filter(). Fix the warning/bug by changing the first
parameter.

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    expected struct mac_device_info *hw
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    got void [noderef] <asn:2>*ioaddr

Note, only compile tested this as do not have any
hardware with it in.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace netdev_alloc_skb_ip_align() with napi_alloc_skb() which can save
several CPU cycles by avoiding having to disable and re-enable IRQs.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: bgmac: Misc improvements

This patch series add minor changes to the bgmac driver:

- properly bind net_device with its backing device structure such that
  we can locate the device using common helper functions

- add support for ethtool statistics reading the HW MIB counters which
  is useful for debugging

- add netdev statistics throughout the TX/RX path to know what is going on
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a few netdev statistics to report transmitted and received bytes and
packets and a few obvious errors.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Read the statistics from the BGMAC's builtin MAC and return them to
user-space using the standard ethtool helpers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for allowing different helpers to be utilized against
network devices created by the bgmac driver, make sure that we bind the
net_device with core->dev.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A draft version of the MTU Advice feature bit was specified as 25.  This
bit is not within the allowed range for network device feature bits, and
should be changed to be feature bit 3 to fully comply with the spec.

Fixes 14de9d11 ('virtio-net: Add initial MTU advice feature')
Signed-off-by: Aaron Conole <aconole@redhat.com>
Suggested-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is
disabled at boot using the kernel option ipv6.disable=1. Using
current net-next with the boot option:

$ ip link add red type vrf table 1001

Generates:
[12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748
[12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a
[12210.922537] PGD b79e3067 PUD bb32b067 PMD 0
[12210.923479] Oops: 0000 [#1] SMP
[12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc
[12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235
[12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000
[12210.929328] RIP: 0010:[<ffffffff814b30e3>]  [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a
[12210.930697] RSP: 0018:ffff8800bacaf888  EFLAGS: 00010202
[12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28
[12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286
[12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b
[12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9
[12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000
[12210.937103] FS:  00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000
[12210.938321] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0
[12210.940278] Stack:
[12210.940603]  ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135
[12210.941818]  ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800
[12210.943040]  ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280
[12210.944288] Call Trace:
[12210.944688]  [<ffffffff814b3135>] fib6_new_table+0x24/0x8a
[12210.945516]  [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162
[12210.946328]  [<ffffffff814091e1>] register_netdevice+0x100/0x396
[12210.947209]  [<ffffffff8139823d>] vrf_newlink+0x40/0xb3
[12210.948001]  [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5
...

The problem above is due to the fact that the fib hash table is not
allocated when IPv6 is disabled at boot.

As for the VRF driver it should not do any IPv6 initializations if IPv6
is disabled, so it needs to know if IPv6 is disabled at boot. The disable
parameter is private to the IPv6 module, so provide an accessor for
modules to determine if IPv6 was disabled at boot time.

Fixes: 35402e31 ("net: Add IPv6 support to VRF device")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify the RxRPC connect() implementation.  It will just note the
destination address it is given, and if a sendmsg() comes along with no
address, this will be assigned as the address.  No transport struct will be
held internally, which will allow us to remove this later.

Simplify sendmsg() also.  Whilst a call is active, userspace refers to it
by a private unique user ID specified in a control message.  When sendmsg()
sees a user ID that doesn't map to an extant call, it creates a new call
for that user ID and attempts to add it.  If, when we try to add it, the
user ID is now registered, we now reject the message with -EEXIST.  We
should never see this situation unless two threads are racing, trying to
create a call with the same ID - which would be an error.

It also isn't required to provide sendmsg() with an address - provided the
control message data holds a user ID that maps to a currently active call.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabien Siron <fabien.siron@epita.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

I am not sure mlx4_en_netpoll() is doing anything useful right now.

mlx4 has different NAPI structures for RX and TX, and netpoll only wants
to drain TX queues.

Lets schedule NAPI polls on TX, not RX.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: Broadcom BCM53xx switches support

This patch series adds support for the Broadcom BCM53xx series aka RoboSwitches.

This driver is largely based on Jonas Gorski's b53 driver for OpenWrt which can
be found here:

https://dev.openwrt.org/browser/trunk/target/linux/generic/files/drivers/net/phy/b53

a few bug fixes and DSA-ifycation later, here is what we got.

This has been successfully tested in the following configurations:

- Broadcom BCM53011 using the SRAB bus layer with 4 ports LAN, 1 port WAN

- A Broadcom BCM7445 device with an internal Starfighter 2 switch (bcm_sf2.c)
  and a Broadcom BCM53125 hanging off one of its ports connected via MDIO, creating
  two trees hanging off each other, and this works!

- A Broadcom BCM53125 MDIO connected to a Lamobo/Bananapi R1 board using the STMMAC
  MDIO driver

For now, we do not enable Broadcom tags, because there are different
generations of switches being supported which have different tag formats, but
the plan is to enable them later on.

Support for different HW features will be added later: EEE, Compact Field
Processor (TCAM) once this initial cut gets accepted.

Testing and bug reports welcome!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuration VLANs on B53 devices by implementing the
port VLAN add/del/dump functions. We currently default to a behavior
which is equivalent to having VLAN filtering turned on, where all VLANs
not programmed into the VLAN port-based vector will be discarded on
ingress.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for HW bridging by tying the ports together in the same port
VLAN mask when they belong to the same bridge, and isolating them to be
alone with the CPU port when they are not.

Propagate STP states from the bridge layer to the switch's HW mapping
when requested.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for FDB add/delete/dump using the ARL read/write logic and
the ARL search logic for faster dumps. The code is made flexible enough
it could support devices with a different register layout like BCM5325
and BCM5365 which have fewer number of entries or pack values into a
single 64 bits register.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Broadcom BCM7445 STB chip has an issued in its revision D0 which was
previously worked around in drivers/net/dsa/bcm_sf2.c where we may
end-up double programming the integrated BCM7445 switch (bcm_sf2) and an
external Broadcom switch such as BCM53125, since these are mostly
register compatible.

Add a small quirk which just defers probing until we are sitting on the
slave DSA MDIO bus, which will allow us to intercept reads/writes and
funnel them through the SF2 internal MDIO master (which happens to
disconnect its pseudo PHY).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for Broadcom's BCM53xx switch family, also known
as RoboSwitch. Some of these switches are ubiquituous, found in home
routers, Wi-Fi routers, DSL and cable modem gateways and other
networking related products.

This drivers adds the library driver (b53_common.c) as well as a few bus
glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and
memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx).

Basic operations are supported to bring the Layer 1/2 up and running,
but not much more at this point, subsequent patches add the remaining
features.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: bcm_sf2: add VLAN support

This is long overdue, finally add support for VLANs in the Broadcom Starfigther
2 switch driver.

There are a few things that make us differ from e.g; mv88e6xxx.c:

- we keep a software cache of which VLANs are enabled and which are not to
  dramatically speed up the VLAN dump operation, we do not have any HW operation
  which would only return the list of valid VLAN entries, they would have to be
  all queried one by one, with 4K vlans, this takes a while

- the default behavior is equivalent to setting VLAN filtering to 1, still working
  on implementing a proper port_vlan_filtering callback, but I figured the most
  conservative behavior is probably okay anyway

- without enabling VLANs, the default behavior is to receive any 802.1q frames
  (per the DSA documentation), however, once we start enabling VLAN support, if
  an interface leaves the bridge, we still want it to receive all 802.1q frames
  so we utiliez the "Join all VLAN" feature of the switch to perform that
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring VLANs on the Broadcom Starfigther2 switch.
This is all done through the bridge vlan facility just like other DSA
drivers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the definitions for the VLAN registers that we are going to
manipulate in subsequent patches.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Re-order the bcm_sf2_sw_setup() function so that it is at the far end of
the driver to avoid any kind of forward declarations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper function to fast age something that is controlled by the
caller: port, VLAN. We will use this to implement a VLAN fast age
operation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G mlx5 fixes for 4.7-rc

The following series provides some small fixes for mlx5 driver.

Two small fixes for the mlx5e netdev, the 1st is for the blue flame
quota accounting and the 2nd is a small refactoring in shutdown flow.

Five trivial fixes for mlx5 E-Switch.
	- Allmulti mc_promisc flag was not set in a specific flow.
	- Modify VF node guid when admin mac is changed.
	- Race in vport enable flow.
	- Misc code fixes (kvfree when needed and error pointers checking).

Three in mlx5 steering area.  Correct capabilities checking and root flow table update.

Three misc fixes in mlx5 commands enum and layouts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Blue flame is a latency enhancement feature that allows the driver to
write the packet data directly to the NIC's registers thus making the
read of the packet data from host memory redundant.

We maintain a quota for the blue flame which is reloaded whenever we
identify that the hardware is processing send requests and processes
them fast enough so by the time we post the next send request it was
able to process all the pending ones. This indicates that the hardware
is capable of processing more blue flame requests efficiently. The blue
flame quota is decremented whenever we send using blue flame.

The current code erroneously clears the budget if we did not use blue
flame for the current post send operation and we fix it here.

Fixes: 88a85f99 ('net/mlx5e: TX latency optimization to save DMA reads')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current implementation copies the flow of ndo_stop instead of
calling it explicitly, Fixed it.

Fixes: 5fc7197d ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>