- 27 Aug, 2018 1 commit
-
-
Juergen Gross authored
In some cases 32-bit PAE PV guests still write PTEs directly instead of using hypercalls. This is especially bad when clearing a PTE as this is done via 32-bit writes which will produce intermediate L1TF attackable PTEs. Change the code to use hypercalls instead. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com>
-
- 20 Aug, 2018 7 commits
-
-
Juergen Gross authored
Commit 7b25b9cb ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()") moved the mapping of the shared info area before pagetable_init(). This breaks booting as 32-bit PV guest as the use of set_fixmap isn't possible at this time on 32-bit. This can be worked around by populating the needed PMD on 32-bit kernel earlier. In order not to reimplement populate_extra_pte() using extend_brk() for allocating new page tables extend alloc_low_pages() to do that in case the early page table pool is not yet available. Fixes: 7b25b9cb ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Juergen Gross authored
Remove Xen hypercall functions which are used nowhere in the kernel. Signed-off-by:
-
Juergen Gross authored
xen_auto_xlated_memory_setup() is a leftover from PVH V1. Remove it. Signed-off-by:
-
Jan Beulich authored
This is unnecessary and triggers a warning in the hypervisor. Often systems have more processor entries in their ACPI tables than are actually installed/active. The ACPI_STA_DEVICE_PRESENT bit cannot be reliably used, but the ACPI_MADT_ENABLED bit can. In order to not introduce new functions in the main ACPI processor driver code, simply use acpi_get_phys_id(), which does more than we need, but which checks the MADT enabled bit in the process. Any CPU for which we can't determine the APIC ID is unlikely to work properly anyway, so the extra checks done by acpi_get_phys_id() should do no harm. Signed-off-by:
Rafael J. Wysocki <rafael@kernel.org> Signed-off-by:
-
Jan Beulich authored
As the sequence of invocations matters, add "tty" only after "hvc" when a VGA console is available (which is often the case for Dom0, but hardly ever for DomU). Signed-off-by:
-
Jan Beulich authored
This already gets done in HYPERVISOR_mca(). Signed-off-by:
-
Jan Beulich authored
Its only caller is __init, so to avoid section mismatch warnings when a compiler decides to not inline the function marke this function so as well. Take the opportunity and also make the function actually use its argument: The sole caller passes in zero anyway. Signed-off-by:
-
- 19 Aug, 2018 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix races in IPVS, from Tan Hu. 2) Missing unbind in matchall classifier, from Hangbin Liu. 3) Missing act_ife action release, from Vlad Buslov. 4) Cure lockdep splats in ila, from Cong Wang. 5) veth queue leak on link delete, from Toshiaki Makita. 6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From Kees Cook. 7) RCU usage fixup in XDP, from Tariq Toukan. 8) Two TCP ULP fixes from Daniel Borkmann. 9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner Kallweit. 10) Always take tcf_lock with BH disabled, otherwise we can deadlock with rate estimator code paths. From Vlad Buslov. 11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly. From Jian-Hong Pan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) ip6_vti: fix creating fallback tunnel device for vti6 ip_vti: fix a null pointer deferrence when create vti fallback tunnel r8169: don't use MSI-X on RTL8106e net: lan743x_ptp: convert to ktime_get_clocktai_ts64 net: sched: always disable bh when taking tcf_lock ip6_vti: simplify stats handling in vti6_xmit bpf: fix redirect to map under tail calls r8169: add missing Kconfig dependency tools/bpf: fix bpf selftest test_cgroup_storage failure bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist bpf, sockmap: fix map elem deletion race with smap_stop_sock bpf, sockmap: fix leakage of smap_psock_map_entry tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach tcp, ulp: add alias for all ulp modules bpf: fix a rcu usage warning in bpf_prog_array_copy_core() samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM net/xdp: Fix suspicious RCU usage warning net/mlx5e: Delete unneeded function argument Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb isdn: Disable IIOCDBGVAR ... -
Haishuang Yan authored
When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel device for vti6 when a new namespace is created. Tested: [root@builder2 ~]# modprobe ip6_tunnel [root@builder2 ~]# modprobe ip6_vti [root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net [root@builder2 ~]# unshare -n [root@builder2 ~]# ip link 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 Signed-off-by:Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will be NULL and will cause following crash: [ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at 0000000000000941 [ 2742.851380] PGD 800000042c21a067 P4D 800000042c21a067 PUD 42aaed067 PMD 0 [ 2742.852818] Oops: 0002 [#1] SMP PTI [ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2 [ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014 [ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti] [ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00 [ 2742.861940] RSP: 0018:ffff9be28207fde0 EFLAGS: 00010246 [ 2742.863044] RAX: 0000000000000000 RBX: ffff8a71ebed4980 RCX: 0000000000000013 [ 2742.864540] RDX: 0000000000000000 RSI: 0000000000000013 RDI: ffff8a71ebed4980 [ 2742.866020] RBP: ffff8a71ea717000 R08: ffffffffc083903c R09: ffff8a71ea717000 [ 2742.867505] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a71ebed4980 [ 2742.868987] R13: 0000000000000013 R14: ffff8a71ea5b49c0 R15: 0000000000000000 [ 2742.870473] FS: 00007f02266c9740(0000) GS:ffff8a71ffdc0000(0000) knlGS:0000000000000000 [ 2742.872143] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2742.873340] CR2: 0000000000000941 CR3: 000000042bc20006 CR4: 00000000001606e0 [ 2742.874821] Call Trace: [ 2742.875358] ops_init+0x38/0xf0 [ 2742.876078] setup_net+0xd9/0x1f0 [ 2742.876789] copy_net_ns+0xb7/0x130 [ 2742.877538] create_new_namespaces+0x11a/0x1d0 [ 2742.878525] unshare_nsproxy_namespaces+0x55/0xa0 [ 2742.879526] ksys_unshare+0x1a7/0x330 [ 2742.880313] __x64_sys_unshare+0xe/0x20 [ 2742.881131] do_syscall_64+0x5b/0x180 [ 2742.881933] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reproduce: echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net modprobe ip_vti unshare -n Fixes: 79134e6c ("net: do not create fallback tunnels for non-default namespaces") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jian-Hong Pan authored
Found the ethernet network on ASUS X441UAR doesn't come back on resume from suspend when using MSI-X. The chip is RTL8106e - version 39. [ 21.848357] libphy: r8169: probed [ 21.848473] r8169 0000:02:00.0 eth0: RTL8106e, 0c:9d:92:32:67:b4, XID 44900000, IRQ 127 [ 22.518860] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 29.458041] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 63.227398] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off [ 124.514648] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) Here is the ethernet controller in detail: 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07) Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast Ethernet controller [1043:200f] Flags: bus master, fast devsel, latency 0, IRQ 16 I/O ports at e000 [size=256] Memory at ef100000 (64-bit, non-prefetchable) [size=4K] Memory at e0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 Falling back to MSI fixes the issue. Fixes: 6c6aa15f ("r8169: improve interrupt handling") Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
Arnd Bergmann authored
timekeeping_clocktai64() has been renamed to ktime_get_clocktai_ts64() for consistency with the other ktime_get_* access functions. Rename the new caller that has come up as well. Question: this is the only ptp driver that sets the hardware time to the current system time in TAI. Why does it do that? Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Vlad Buslov authored
Recently, ops->init() and ops->dump() of all actions were modified to always obtain tcf_lock when accessing private action state. Actions that don't depend on tcf_lock for synchronization with their data path use non-bh locking API. However, tcf_lock is also used to protect rate estimator stats in softirq context by timer callback. Change ops->init() and ops->dump() of all actions to disable bh when using tcf_lock to prevent deadlock reported by following lockdep warning: [ 105.470398] ================================ [ 105.475014] WARNING: inconsistent lock state [ 105.479628] 4.18.0-rc8+ #664 Not tainted [ 105.483897] -------------------------------- [ 105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 105.500449] 00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0 [ 105.509696] {SOFTIRQ-ON-W} state was registered at: [ 105.514925] _raw_spin_lock+0x2c/0x40 [ 105.519022] tcf_bpf_init+0x579/0x820 [act_bpf] [ 105.523990] tcf_action_init_1+0x4e4/0x660 [ 105.528518] tcf_action_init+0x1ce/0x2d0 [ 105.532880] tcf_exts_validate+0x1d8/0x200 [ 105.537416] fl_change+0x55a/0x268b [cls_flower] [ 105.542469] tc_new_tfilter+0x748/0xa20 [ 105.546738] rtnetlink_rcv_msg+0x56a/0x6d0 [ 105.551268] netlink_rcv_skb+0x18d/0x200 [ 105.555628] netlink_unicast+0x2d0/0x370 [ 105.559990] netlink_sendmsg+0x3b9/0x6a0 [ 105.564349] sock_sendmsg+0x6b/0x80 [ 105.568271] ___sys_sendmsg+0x4a1/0x520 [ 105.572547] __sys_sendmsg+0xd7/0x150 [ 105.576655] do_syscall_64+0x72/0x2c0 [ 105.580757] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 105.586243] irq event stamp: 489296 [ 105.590084] hardirqs last enabled at (489296): [<ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40 [ 105.599765] hardirqs last disabled at (489295): [<ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50 [ 105.609277] softirqs last enabled at (489292): [<ffffffffb413a6a3>] irq_enter+0x83/0xa0 [ 105.618001] softirqs last disabled at (489293): [<ffffffffb413a800>] irq_exit+0x140/0x190 [ 105.626813] other info that might help us debug this: [ 105.633976] Possible unsafe locking scenario: [ 105.640526] CPU0 [ 105.643325] ---- [ 105.646125] lock(&(&p->tcfa_lock)->rlock); [ 105.650747] <Interrupt> [ 105.653717] lock(&(&p->tcfa_lock)->rlock); [ 105.658514] *** DEADLOCK *** [ 105.665349] 1 lock held by swapper/16/0: [ 105.669629] #0: 00000000a640ad99 ((&est->timer)){+.-.}, at: call_timer_fn+0x10b/0x550 [ 105.678200] stack backtrace: [ 105.683194] CPU: 16 PID: 0 Comm: swapper/16 Not tainted 4.18.0-rc8+ #664 [ 105.690249] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 105.698626] Call Trace: [ 105.701421] <IRQ> [ 105.703791] dump_stack+0x92/0xeb [ 105.707461] print_usage_bug+0x336/0x34c [ 105.711744] mark_lock+0x7c9/0x980 [ 105.715500] ? print_shortest_lock_dependencies+0x2e0/0x2e0 [ 105.721424] ? check_usage_forwards+0x230/0x230 [ 105.726315] __lock_acquire+0x923/0x26f0 [ 105.730597] ? debug_show_all_locks+0x240/0x240 [ 105.735478] ? mark_lock+0x493/0x980 [ 105.739412] ? check_chain_key+0x140/0x1f0 [ 105.743861] ? __lock_acquire+0x836/0x26f0 [ 105.748323] ? lock_acquire+0x12e/0x290 [ 105.752516] lock_acquire+0x12e/0x290 [ 105.756539] ? est_fetch_counters+0x3c/0xa0 [ 105.761084] _raw_spin_lock+0x2c/0x40 [ 105.765099] ? est_fetch_counters+0x3c/0xa0 [ 105.769633] est_fetch_counters+0x3c/0xa0 [ 105.773995] est_timer+0x87/0x390 [ 105.777670] ? est_fetch_counters+0xa0/0xa0 [ 105.782210] ? lock_acquire+0x12e/0x290 [ 105.786410] call_timer_fn+0x161/0x550 [ 105.790512] ? est_fetch_counters+0xa0/0xa0 [ 105.795055] ? del_timer_sync+0xd0/0xd0 [ 105.799249] ? __lock_is_held+0x93/0x110 [ 105.803531] ? mark_held_locks+0x20/0xe0 [ 105.807813] ? _raw_spin_unlock_irq+0x29/0x40 [ 105.812525] ? est_fetch_counters+0xa0/0xa0 [ 105.817069] ? est_fetch_counters+0xa0/0xa0 [ 105.821610] run_timer_softirq+0x3c4/0x9f0 [ 105.826064] ? lock_acquire+0x12e/0x290 [ 105.830257] ? __bpf_trace_timer_class+0x10/0x10 [ 105.835237] ? __lock_is_held+0x25/0x110 [ 105.839517] __do_softirq+0x11d/0x7bf [ 105.843542] irq_exit+0x140/0x190 [ 105.847208] smp_apic_timer_interrupt+0xac/0x3b0 [ 105.852182] apic_timer_interrupt+0xf/0x20 [ 105.856628] </IRQ> [ 105.859081] RIP: 0010:cpuidle_enter_state+0xd8/0x4d0 [ 105.864395] Code: 46 ff 48 89 44 24 08 0f 1f 44 00 00 31 ff e8 cf ec 46 ff 80 7c 24 07 00 0f 85 1d 02 00 00 e8 9f 90 4b ff fb 66 0f 1f 44 00 00 <4c> 8b 6c 24 08 4d 29 fd 0f 80 36 03 00 00 4c 89 e8 48 ba cf f7 53 [ 105.884288] RSP: 0018:ffff8803ad94fd20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 105.892494] RAX: 0000000000000000 RBX: ffffe8fb300829c0 RCX: ffffffffb41e19e1 [ 105.899988] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8803ad9358ac [ 105.907503] RBP: ffffffffb6636300 R08: 0000000000000004 R09: 0000000000000000 [ 105.914997] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004 [ 105.922487] R13: ffffffffb6636140 R14: ffffffffb66362d8 R15: 000000188d36091b [ 105.929988] ? trace_hardirqs_on_caller+0x141/0x2d0 [ 105.935232] do_idle+0x28e/0x320 [ 105.938817] ? arch_cpu_idle_exit+0x40/0x40 [ 105.943361] ? mark_lock+0x8c1/0x980 [ 105.947295] ? _raw_spin_unlock_irqrestore+0x32/0x60 [ 105.952619] cpu_startup_entry+0xc2/0xd0 [ 105.956900] ? cpu_in_idle+0x20/0x20 [ 105.960830] ? _raw_spin_unlock_irqrestore+0x32/0x60 [ 105.966146] ? trace_hardirqs_on_caller+0x141/0x2d0 [ 105.971391] start_secondary+0x2b5/0x360 [ 105.975669] ? set_cpu_sibling_map+0x1330/0x1330 [ 105.980654] secondary_startup_64+0xa5/0xb0 Taking tcf_lock in sample action with bh disabled causes lockdep to issue a warning regarding possible irq lock inversion dependency between tcf_lock, and psample_groups_lock that is taken when holding tcf_lock in sample init: [ 162.108959] Possible interrupt unsafe locking scenario: [ 162.116386] CPU0 CPU1 [ 162.121277] ---- ---- [ 162.126162] lock(psample_groups_lock); [ 162.130447] local_irq_disable(); [ 162.136772] lock(&(&p->tcfa_lock)->rlock); [ 162.143957] lock(psample_groups_lock); [ 162.150813] <Interrupt> [ 162.153808] lock(&(&p->tcfa_lock)->rlock); [ 162.158608] *** DEADLOCK *** In order to prevent potential lock inversion dependency between tcf_lock and psample_groups_lock, extract call to psample_group_get() from tcf_lock protected section in sample action init function. Fixes: 4e232818 ("net: sched: act_mirred: remove dependency on rtnl lock") Fixes: 764e9a24 ("net: sched: act_vlan: remove dependency on rtnl lock") Fixes: 729e0126 ("net: sched: act_tunnel_key: remove dependency on rtnl lock") Fixes: d7728495 ("net: sched: act_sample: remove dependency on rtnl lock") Fixes: e8917f43 ("net: sched: act_gact: remove dependency on rtnl lock") Fixes: b6a2b971 ("net: sched: act_csum: remove dependency on rtnl lock") Fixes: 2142236b ("net: sched: act_bpf: remove dependency on rtnl lock") Signed-off-by:Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull first set of KVM updates from Paolo Bonzini: "PPC: - minor code cleanups x86: - PCID emulation and CR3 caching for shadow page tables - nested VMX live migration - nested VMCS shadowing - optimized IPI hypercall - some optimizations ARM will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits) kvm: x86: Set highest physical address bits in non-present/reserved SPTEs KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c KVM: X86: Implement PV IPIs in linux guest KVM: X86: Add kvm hypervisor init time platform setup callback KVM: X86: Implement "send IPI" hypercall KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs() KVM: x86: Skip pae_root shadow allocation if tdp enabled KVM/MMU: Combine flushing remote tlb in mmu_set_spte() KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup KVM: vmx: move struct host_state usage to struct loaded_vmcs KVM: vmx: compute need to reload FS/GS/LDT on demand KVM: nVMX: remove a misleading comment regarding vmcs02 fields KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state() KVM: vmx: add dedicated utility to access guest's kernel_gs_base KVM: vmx: track host_state.loaded using a loaded_vmcs pointer KVM: vmx: refactor segmentation code in vmx_save_host_state() kvm: nVMX: Fix fault priority for VMX operations kvm: nVMX: Fix fault vector for VMX operation at CPL > 0 ...
-
Linus Torvalds authored
Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some major improvements to the RISC-V port, including the necessary interrupt controller and timer support to actually make it to userspace. Support for three devices has been added: - the ISA-mandated timers on RISC-V systems. - the ISA-mandated first-level interrupt controller on RISC-V systems, which is handled as part of our core arch code because it's very small and tightly tied to the ISA. - SiFive's platform-level interrupt controller, which talks to the actual devices. In addition to these new devices, there are a handful of cleanups all over the RISC-V tree: - build fixes for various configurations: * A fix to the vDSO build's makefile so it respects CFLAGS. * The addition of __lshrti3, a libgcc derived function necessary for some 32-bit configurations. * !SMP && PERF_EVENTS - Cleanups to the arch code to remove the remnants of old versions of the drivers that were just properly submitted. * Some dead code from the timer driver, most of which wasn't ever even compiled. * Cleanups of some interrupt #defines, which are now local to the interrupt handling code. - Fixes to ptrace(), which while not being sufficient to fully make GDB work are at least sufficient to get simple GDB tasks to work. - Early printk support via RISC-V's architecturally mandated SBI console device. - A fix to our early debug trap handler to ensure it's always aligned. These patches have all been through a fairly extensive review process, but as this enables a whole pile of functionality (ie, userspace) I'm confident we'll need to submit a few more patches. The only concrete issues I know about are the sys_riscv_flush_icache patches, but as I managed to screw those up on Friday I figured it'd be best to let them bake another week. This tag boots a Fedora root filesystem on QEMU's master branch for me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on the HiFive Unleashed. Thanks to Christoph Hellwig and the other guys at WD for getting the new drivers in shape!" * tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller dt-bindings: interrupt-controller: RISC-V local interrupt controller RISC-V: Fix !CONFIG_SMP compilation error irqchip: add a SiFive PLIC driver RISC-V: Add the directive for alignment of stvec's value clocksource: new RISC-V SBI timer driver RISC-V: implement low-level interrupt handling RISC-V: add a definition for the SIE SEIE bit RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h RISC-V: simplify software interrupt / IPI code RISC-V: remove timer leftovers RISC-V: Add early printk support via the SBI console RISC-V: Don't increment sepc after breakpoint. RISC-V: implement __lshrti3. RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull UIO fix from Greg KH: "Here is a single UIO fix that I forgot to send before 4.18-final came out. It reverts a UIO patch that went in the 4.18 development window that was causing problems. This patch has been in linux-next for a while with no problems, I just forgot to send it earlier, or as part of the larger char/misc patch series from yesterday, my fault" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "uio: use request_threaded_irq instead"
-
- 18 Aug, 2018 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This introduces devres helpers and an API to request a lock by name, then migrates the sprd SPI driver to use these" * tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc: hwspinlock: Fix incorrect return pointers spi: sprd: Change to use devm_hwspin_lock_request_specific() spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname() hwspinlock: Fix one comment mistake hwspinlock: Remove redundant config hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller hwspinlock: Add devm_xxx() APIs to request/free hwlock hwspinlock: Add one new API to support getting a specific hwlock by the name
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This fixes a few compile and kerneldoc warnings, allows rpmsg devices to handle power domains, allow for labeling GLINK edges and supports compat for rpmsg_char" * tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc: rpmsg: Add compat ioctl for rpmsg char driver rpmsg: glink: Store edge name for glink device dt-bindings: soc: qcom: Add label for GLINK bindings rpmsg: core: add support to power domains for devices rpmsg: smd: fix kerneldoc warnings rpmsg: glink: Fix various kerneldoc warnings. rpmsg: glink: correctly annotate intent members rpmsg: smd: Add missing include of sizes.h
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This adds support for pre-start and post-shutdown hooks for remoteproc subdevices, refactors the Qualcomm Hexagon support to allow reuse between several drivers, makes authentication in the MDT file loader optional, migrates a few format strings to use %pK and migrates the Davinci driver to use the reset framework" * tag 'rproc-v4.19' of git://github.com/andersson/remoteproc: remoteproc/davinci: use the reset framework remoteproc/davinci: Mark error recovery as disabled remoteproc: st_slim: replace "%p" with "%pK" remoteproc: replace "%p" with "%pK" remoteproc: qcom: fix Q6V5_WCSS dependencies remoteproc: Reset table_ptr in rproc_start() failure paths remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote remoteproc: qcom q6v5: fix modular build remoteproc: Introduce prepare and unprepare for subdevices remoteproc: rename subdev probe and remove functions remoteproc: Make client initialize ops in rproc_subdev remoteproc: Make start and stop in subdev optional remoteproc: Rename subdev functions to start/stop remoteproc: qcom: Introduce Hexagon V5 based WCSS driver remoteproc: qcom: q6v5-pil: Use common q6v5 helpers remoteproc: qcom: adsp: Use common q6v5 helpers remoteproc: q6v5: Extract common resource handling remoteproc: qcom: mdt_loader: Make the firmware authentication optional
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - add MEN 16z069 IP-Core driver - renesas-wdt: add support for the R8A77990 wdt - stm32_iwdg: Add stm32mp1 support and pclk feature - sp805_wdt, orion_wdt, sprd_wdt: several improvements - imx2_wdt, stmp3xxx: switch to SPDX identifier * tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: fix dependencies of menz69_wdt.o watchdog: sp805: Add clock-frequency property watchdog: add driver for the MEN 16z069 IP-Core watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe() watchdog: stmp3xxx: Switch to SPDX identifier watchdog: imx2_wdt: Switch to SPDX identifier watchdog: sp805: set WDOG_HW_RUNNING when appropriate watchdog: sp805: add 'timeout-sec' DT property support dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805 dt-bindings: watchdog: Consolidate SP805 binding docs watchdog: orion_wdt: Mark watchdog as active when running at probe watchdog: stm32: add pclk feature for stm32mp1 dt-bindings: watchdog: add stm32mp1 support dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull DMAengine updates from Vinod Koul: "This round brings couple of framework changes, a new driver and usual driver updates: - new managed helper for dmaengine framework registration - split dmaengine pause capability to pause and resume and allow drivers to report that individually - update dma_request_chan_by_mask() to handle deferred probing - move imx-sdma to use virt-dma - new driver for Actions Semi Owl family S900 controller - minor updates to intel, renesas, mv_xor, pl330 etc" * tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Add Actions Semi Owl family S900 DMA driver dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr() dmaengine: mic_x100_dma: use the new helper to simplify the code dmaengine: add a new helper dmaenginem_async_device_register dmaengine: imx-sdma: add memcpy interface dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff' dmaengine: dma_request_chan_by_mask() to handle deferred probing dmaengine: pl330: fix irq race with terminate_all dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST" dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address dmaengine: mv_xor_v2: enable COMPILE_TEST dmaengine: mv_xor_v2: move unmap to before callback dmaengine: mv_xor_v2: convert callback to helper function dmaengine: mv_xor_v2: kill the tasklets upon exit dmaengine: mv_xor_v2: explicitly freeup irq dmaengine: sh: rcar-dmac: Add dma_pause operation dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier dmaengine: idma64: Support dmaengine_terminate_sync() dmaengine: hsu: Support dmaengine_terminate_sync() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "Updates for MMC for v4.19. MMC core: - Add some fine-grained hooks to further support HS400 tuning - Improve error path for bus width setting for HS400es - Use a common method when checking R1 status MMC host: - renesas_sdhi: Add r8a77990 support - renesas_sdhi: Add eMMC HS400 mode support - tmio/renesas_sdhi: Improve tuning/clock management - tmio: Add eMMC HS400 mode support - sunxi: Add support for 3.3V eMMC DDR mode - mmci: Initial support to manage variant specific callbacks - sdhci: Don't try 3.3V I/O voltage if not supported - sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI - sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI - sdhci-msm: Add support for new version sdcc V5 - sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode - sdhci-pci-o2micro: Add support for O2 hardware tuning - sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host - sdhci-pci: Add support for Intel ICP - sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3 - sdhci-tegra: Fix eMMC DDR52 mode - sdhci-tegra: Improve clock management - dw_mmc-rockchip: Document compatible string for px30 - sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode - sdhci-of-esdhc: Set proper DMA mask for ls104x chips - sdhci-of-esdhc: Improve clock management - sdhci-of-arasan: Add a quirk to manage unstable clocks - dw_mmc-exynos: Address potential external abort during system resume - pxamci: Add support for common MMC DT bindings - pxamci: Several cleanups and improvements - pxamci: Merge immutable branch for pxa to switch to DMA slave maps" * tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits) mmc: core: improve reasonableness of bus width setting for HS400es mmc: tmio: remove unneeded variable in tmio_mmc_start_command() mmc: renesas_sdhi: Fix sampling clock position selecting mmc: tmio: Fix tuning flow mmc: sunxi: remove output of virtual base address dt-bindings: mmc: rockchip-dw-mshc: add description for px30 mmc: renesas_sdhi: Add r8a77990 support mmc: sunxi: allow 3.3V DDR when DDR is available mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml mmc: mmci: Initial support to manage variant specific callbacks mmc: tegra: Force correct divider calculation on DDR50/52 mmc: sdhci: Add MSI interrupt support for O2 SD host mmc: sdhci: Add support for O2 hardware tuning mmc: sdhci: Export sdhci tuning function symbol mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz mmc: sdhci: Add support for O2 eMMC HS200 mode mmc: tegra: Add and use tegra_sdhci_get_max_clock() mmc: sdhci-esdhc-imx: fix indent mmc: sdhci-esdhc-imx: disable clocks before changing frequency mmc: tegra: prevent ACMD23 on Tegra 3 ...
-
Haishuang Yan authored
Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit code path. Signed-off-by:
-
Linus Torvalds authored
This function was created as a deprecated fallback case back in 2010 by commit eb14120f ("pcmcia: re-work pcmcia_request_irq()") for legacy cases. Actual in-kernel users haven't been around for a long while. The last in-kernel user was apparently removed four years ago by commit 5f5316fc ("am2150: Update nmclan_cs.c to use update PCMCIA API"). Just remove it entirely. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We haven't had lots of deprecation warnings lately, but the rdma use of it made them flare up again. They are not useful. They annoy everybody, and nobody ever does anything about them, because it's always "somebody elses problem". And when people start thinking that warnings are normal, they stop looking at them, and the real warnings that mean something go unnoticed. If you want to get rid of a function, just get rid of it. Convert every user to the new world order. And if you can't do that, then don't annoy everybody else with your marking that says "I couldn't be bothered to fix this, so I'll just spam everybody elses build logs with warnings about my laziness". Make a kernelnewbies wiki page about things that could be cleaned up, write a blog post about it, or talk to people on the mailing lists. But don't add warnings to the kernel build about cleanup that you think should happen but you aren't doing yourself. Don't. Just don't. Signed-off-by: -
Linus Torvalds authored
Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are all of the driver core and related patches for 4.19-rc1. Nothing huge here, just a number of small cleanups and the ability to now stop the deferred probing after init happens. All of these have been in linux-next for a while with only a merge issue reported" * tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) base: core: Remove WARN_ON from link dependencies check drivers/base: stop new probing during shutdown drivers: core: Remove glue dirs from sysfs earlier driver core: remove unnecessary function extern declare sysfs.h: fix non-kernel-doc comment PM / Domains: Stop deferring probe at the end of initcall iommu: Remove IOMMU_OF_DECLARE iommu: Stop deferring probe at end of initcalls pinctrl: Support stopping deferred probe after initcalls dt-bindings: pinctrl: add a 'pinctrl-use-default' property driver core: allow stopping deferred probe after init driver core: add a debugfs entry to show deferred devices sysfs: Fix internal_create_group() for named group updates base: fix order of OF initialization linux/device.h: fix kernel-doc notation warning Documentation: update firmware loader fallback reference kobject: Replace strncpy with memcpy drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number kernfs: Replace strncpy with memcpy device: Add #define dev_fmt similar to #define pr_fmt ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO updates from Greg KH: "Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues" * tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits) staging:rtl8192u: Remove unused macro definitions - Style staging:rtl8192u: Add spaces around '+' operator - Style staging:rtl8192u: Remove stale comment - Style staging: rtl8188eu: remove unused mp_custom_oid.h staging: fbtft: Add spaces around / - Style staging: fbtft: Erases some repetitive usage of function name - Style staging: fbtft: Adjust some empty-line problems - Style staging: fbtft: Removes one nesting level to help readability - Style staging: fbtft: Changes gamma table to define. staging: fbtft: A bit more information on dev_err. staging: fbtft: Fixes some alignment issues - Style staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style staging: rtl8188eu: remove unused array dB_Invert_Table staging: rtl8188eu: remove whitespace, add missing blank line staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c staging: rtl8188eu: remove whitespace - style staging: rtl8188eu: cleanup block comment - style staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c staging: rtlwifi: refactor rtl_get_tcb_desc ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver pull request for 4.19-rc1. It's not all that big, just a number of small serial driver updates and fixes, along with some better vt handling for unicode characters for those using braille terminals. All of these patches have been in linux-next for a long time with no reported issues" * tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits) tty: serial: 8250: Revert NXP SC16C2552 workaround serial: 8250_exar: Read INT0 from slave device, too tty: rocket: Fix possible buffer overwrite on register_PCI serial: 8250_dw: Add ACPI support for uart on Broadcom SoC serial: 8250_dw: always set baud rate in dw8250_set_termios dt-bindings: serial: Add binding for uartlite tty: serial: uartlite: Add support for suspend and resume tty: serial: uartlite: Add clock adaptation tty: serial: uartlite: Add structure for private data serial: sh-sci: Improve support for separate TEI and DRI interrupts serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE serial: sh-sci: Allow for compressed SCIF address serial: sh-sci: Improve interrupts description serial: 8250: Use cached port name directly in messages serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup() vt: drop unused struct vt_struct vt: avoid a VLA in the unicode screen scroll function vt: add /dev/vcsu* to devices.txt vt: coherence validation code for the unicode screen buffer vt: selection: take screen contents from uniscr if available ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/PHY updates from Greg KH: "Here is the big USB and phy driver patch set for 4.19-rc1. Nothing huge but there was a lot of work that happened this development cycle: - lots of type-c work, with drivers graduating out of staging, and displayport support being added. - new PHY drivers - the normal collection of gadget driver updates and fixes - code churn to work on the urb handling path, using irqsave() everywhere in anticipation of making this codepath a lot simpler in the future. - usbserial driver fixes and reworks - other misc changes All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: serial: pl2303: add a new device id for ATEN usb: renesas_usbhs: Kconfig: convert to SPDX identifiers usb: dwc3: gadget: Check MaxPacketSize from descriptor usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms usb: dwc2: Turn on uframe_sched on "amlogic" platforms usb: dwc2: Turn on uframe_sched on "his" platforms usb: dwc2: Turn on uframe_sched on "bcm" platforms usb: dwc2: gadget: ISOC's starting flow improvement usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic. usb: dwc3: core: Enable AutoRetry feature in the controller usb: dwc3: Set default mode for dwc_usb31 usb: gadget: udc: renesas_usb3: Add register of usb role switch usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep usb: dwc2: Modify dwc2_readl/writel functions prototype usb: dwc3: pci: Intel Merrifield can be host usb: dwc3: pci: Supply device properties via driver data arm64: dts: dwc3: description of incr burst type usb: dwc3: Enable undefined length INCR burst type usb: dwc3: add global soc bus configuration reg0 usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci ... -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-08-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit restrictions, from Yonghong. 2) Fix a suspicious RCU rcu_dereference_check() warning triggered from removing a device's XDP memory allocator by using the correct rhashtable lookup function, from Tariq. 3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races as well as enforcing module aliases for ULPs. Another fix for BPF map redirect to make them work again with tail calls, from Daniel. 4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Infinite loop in IPVS when net namespace is released, from Tan Hu. 2) Do not show negative timeouts in ip_vs_conn by using the new jiffies_delta_to_msecs(), patches from Matteo Croce. 3) Set F_IFACE flag for linklocal addresses in ip6t_rpfilter, from Florian Westphal. 4) Fix overflow in set size allocation, from Taehee Yoo. 5) Use netlink_dump_start() from ctnetlink to fix memleak from the error path, again from Florian. 6) Register nfnetlink_subsys in last place, otherwise netns init path may lose race and see net->nft uninitialized data. This also reverts previous attempt to fix this by increase netns refcount, patches from Florian. 7) Remove conntrack entries on layer 4 protocol tracker module removal, from Florian. 8) Use GFP_KERNEL_ACCOUNT for xtables blob allocation, from Michal Hocko. 9) Get tproxy documentation in sync with existing codebase, from Mate Eckl. 10) Honor preset layer 3 protocol via ctx->family in the new nft_ct timeout infrastructure, from Harsha Sharma. 11) Let uapi nfnetlink_osf.h compile standalone with no errors, from Dmitry V. Levin. 12) Missing braces compilation warning in nft_tproxy, patch from Mate Eclk. 13) Disregard bogus check to bail out on non-anonymous sets from the dynamic set update extension. ==================== Signed-off-by: -
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "This contains mostly fixes (6 to be backported to stable) and a few changes, here is the breakdown: - rework how fids are attributed by replacing some custom tracking in a list by an idr - for packet-based transports (virtio/rdma) validate that the packet length matches what the header says - a few race condition fixes found by syzkaller - missing argument check when NULL device is passed in sys_mount - a few virtio fixes - some spelling and style fixes" * tag '9p-for-4.19-2' of git://github.com/martinetd/linux: (21 commits) net/9p/trans_virtio.c: add null terminal for mount tag 9p/virtio: fix off-by-one error in sg list bounds check 9p: fix whitespace issues 9p: fix multiple NULL-pointer-dereferences fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed 9p: validate PDU length net/9p/trans_fd.c: fix race by holding the lock net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree() net/9p/virtio: Fix hard lockup in req_done net/9p/trans_virtio.c: fix some spell mistakes in comments 9p/net: Fix zero-copy path in the 9p virtio transport 9p: Embed wait_queue_head into p9_req_t 9p: Replace the fidlist with an IDR 9p: Change p9_fid_create calling convention 9p: Fix comment on smp_wmb net/9p/client.c: version pointer uninitialized fs/9p/v9fs.c: fix spelling mistake "Uknown" -> "Unknown" net/9p: fix error path of p9_virtio_probe 9p/net/protocol.c: return -ENOMEM when kmalloc() failed net/9p/client.c: add missing '\n' at the end of p9_debug() ...
-
- 17 Aug, 2018 5 commits
-
-
Linus Torvalds authored
Merge updates from Andrew Morton: - a few misc things - a few Y2038 fixes - ntfs fixes - arch/sh tweaks - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) mm/hmm.c: remove unused variables align_start and align_end fs/userfaultfd.c: remove redundant pointer uwq mm, vmacache: hash addresses based on pmd mm/list_lru: introduce list_lru_shrink_walk_irq() mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one() mm/list_lru.c: move locking from __list_lru_walk_one() to its caller mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node() mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP mm/sparse: delete old sparse_init and enable new one mm/sparse: add new sparse_init_nid() and sparse_init() mm/sparse: move buffer init/fini to the common place mm/sparse: use the new sparse buffer functions in non-vmemmap mm/sparse: abstract sparse buffer allocations mm/hugetlb.c: don't zero 1GiB bootmem pages mm, page_alloc: double zone's batchsize mm/oom_kill.c: document oom_lock mm/hugetlb: remove gigantic page support for HIGHMEM mm, oom: remove sleep from under oom_lock kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous() mm/cma: remove unsupported gfp_mask parameter from cma_alloc() ...
-
Colin Ian King authored
Variables align_start and align_end are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'align_start' set but not used [-Wunused-but-set-variable] warning: variable 'align_size' set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/20180714161124.3923-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Colin Ian King authored
Pointer uwq is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'uwq' set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/20180717090802.18357-1-colin.king@canonical.comSigned-off-by:
-
David Rientjes authored
When perf profiling a wide variety of different workloads, it was found that vmacache_find() had higher than expected cost: up to 0.08% of cpu utilization in some cases. This was found to rival other core VM functions such as alloc_pages_vma() with thp enabled and default mempolicy, and the conditionals in __get_vma_policy(). VMACACHE_HASH() determines which of the four per-task_struct slots a vma is cached for a particular address. This currently depends on the pfn, so pfn 5212 occupies a different vmacache slot than its neighboring pfn 5213. vmacache_find() iterates through all four of current's vmacache slots when looking up an address. Hashing based on pfn, an address has ~1/VMACACHE_SIZE chance of being cached in the first vmacache slot, or about 25%, *if* the vma is cached. This patch hashes an address by its pmd instead of pte to optimize for workloads with good spatial locality. This results in a higher probability of vmas being cached in the first slot that is checked: normally ~70% on the same workloads instead of 25%. [rientjes@google.com: various updates] Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807231532290.109445@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807091749150.114630@chino.kir.corp.google.comSigned-off-by:
David Rientjes <rientjes@google.com> Reviewed-by:
-
Sebastian Andrzej Siewior authored
Provide list_lru_shrink_walk_irq() and let it behave like list_lru_walk_one() except that it locks the spinlock with spin_lock_irq(). This is used by scan_shadow_nodes() because its lock nests within the i_pages lock which is acquired with IRQ. This change allows to use proper locking promitives instead hand crafted lock_irq_disable() plus spin_lock(). There is no EXPORT_SYMBOL provided because the current user is in-kernel only. Add list_lru_shrink_walk_irq() which acquires the spinlock with the proper locking primitives. Link: http://lkml.kernel.org/r/20180716111921.5365-5-bigeasy@linutronix.deSigned-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
