- 20 Nov, 2020 11 commits
-
-
Ranjani Sridharan authored
The ignore_machine field in the component driver is used to ignore the FE DAI links defined in the machine driver, override BE fixups and set the stream names for the DAI links defined in the machine driver. This is required to make SOF compatible with the legacy machine drivers. In the case of the nocodec machine driver in SOF, there is no need to rely upon this ignore_machine logic in the core. Modify the machine driver to set DAI link stream names and the BE hw_params_fixup callback appropriately. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201120141653.2160134-1-kai.vehmanen@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Curtis Malainey authored
Implicit values may have a length of 15bits (s16) so we need to declare the proper size so we don't get undefined behaviour. This appears to be arch and compiler dependent. This commit is to keep the headers aligned between the firmware and kernel. UBSan discovered this bug in the firmware. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: mt6359: Fix regulator_dev_lookup() fails for id "LDO_VAUD18"" from Jiaxin Yu <jiaxin.yu@mediatek.com>: This series fixed "LDO_VAUD18-supply" regulator register fail. We can see the error log "mt6359-sound supply LDO_VAUD18 not found, using dummy regulator" when register the DAPM widget "LDO_VAUD18" Otherwise, the power can not be turned on correctly when recording. Jiaxin Yu (2): ASoC: mediatek: mt6359: Fix regulator_dev_lookup() fails for id "LDO_VAUD18" dt-bindings: mediatek: mt6359: remove unused property for mt6359 Documentation/devicetree/bindings/sound/mt6359.yaml | 9 --------- sound/soc/codecs/mt6359.c | 7 ++++--- 2 files changed, 4 insertions(+), 12 deletions(-) -- 2.18.0 -
Mark Brown authored
Merge series "ASoC: Intel/SOF: extend run-time driver selection to ACPI devices" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: The module snd-intel-dspcfg, suggested by Jaroslav last year, currently provide the means to select a PCI driver at run-time, based on quirks, recommendations or user selection via a kernel parameter. This capability removed a lot of confusions in distributions and removed the need for recompilations to select legacy HDaudio, SST or SOF drivers. This patchset extends the concept to ACPI devices. This was driven by the desire to at some point deprecate the Atom/SST driver for Baytrail and Cherrytrail, which is no longer maintained by Intel. By having the SOF driver enabled by distributions for Baytrail/Cherrytrail, we can enable more end-user tests and make the transition easier for distributions (likely in 2021 at this point). This patchset provides the same solution for Broadwell, mainly to have a single build for all Intel platforms. SOF on Broadwell remains an option not recommended for distributions, as long as the 'catpt' driver is maintained there is no burning desire to make SOF the default on the three Broadwell-based platforms with the DSP enabled. Pierre-Louis Bossart (14): ASoC: Intel: broadwell: add missing pm_ops ASoC: Intel: bdw-rt5677: add missing pm_ops ALSA: hda: intel-dsp-config: add helper for ACPI DSP driver selection ASoC: soc-acpi: add helper to identify parent driver. ASoC: Intel: boards: byt/cht: set card and driver name at run time ASoC: Intel: byt/cht: set pm ops dynamically ASoC: SOF: acpi: add dynamic selection of DSP driver ASoC: Intel: Atom: add dynamic selection of DSP driver ASoC: SOF: Intel: allow for coexistence between SOF and Atom/SST drivers ALSA: hda: intel-dsp-config: add Broadwell ACPI DSP driver selection ASoC: Intel: broadwell: set card and driver name dynamically ASoC: Intel: catpt: add dynamic selection of DSP driver ASoC: SOF: Intel: allow for coexistence between SOF and catpt drivers ALSA: hda: intel-dsp-config: ignore dsp_driver parameter for PCI legacy devices include/sound/intel-dsp-config.h | 7 ++ include/sound/soc-acpi.h | 6 + sound/hda/intel-dsp-config.c | 111 +++++++++++++++++++ sound/soc/intel/Kconfig | 2 + sound/soc/intel/atom/sst/sst_acpi.c | 8 ++ sound/soc/intel/boards/bdw-rt5650.c | 17 ++- sound/soc/intel/boards/bdw-rt5677.c | 18 ++- sound/soc/intel/boards/broadwell.c | 20 ++-- sound/soc/intel/boards/bytcht_cx2072x.c | 27 +++-- sound/soc/intel/boards/bytcht_da7213.c | 27 +++-- sound/soc/intel/boards/bytcht_es8316.c | 29 +++-- sound/soc/intel/boards/bytcr_rt5640.c | 30 +++-- sound/soc/intel/boards/bytcr_rt5651.c | 27 +++-- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 29 +++-- sound/soc/intel/boards/cht_bsw_nau8824.c | 29 +++-- sound/soc/intel/boards/cht_bsw_rt5645.c | 38 ++++--- sound/soc/intel/boards/cht_bsw_rt5672.c | 29 +++-- sound/soc/intel/catpt/device.c | 12 ++ sound/soc/sof/intel/Kconfig | 33 +++--- sound/soc/sof/sof-acpi-dev.c | 14 ++- 20 files changed, 392 insertions(+), 121 deletions(-) -- 2.25.1 -
Dmitry Baryshkov authored
Current code does not setup CPU dai (causing -EIO errors on playback) and does not pass SND_SOC_DAIFMT_I2S to codec fmt (causing i2s-hifi errors). Fix both errors to enable HDMI audio playback on SM8250. Tested on RB5 platform. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: aa2e2785 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201119123145.709891-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Kyle Russell authored
If hw params enables dual phase transmission, then the word length for the second phase should be set to match the sample format instead of remaining at the reset default. This matches the configuration already being done for the first phase. This driver already sets the phase two sample size, so this should complete the phase two configuration. Signed-off-by:
Kyle Russell <bkylerussell@gmail.com> Link: https://lore.kernel.org/r/20201119034106.1273906-1-bkylerussell@gmail.comSigned-off-by:
-
Srinivas Kandagatla authored
Fix module loading due by adding missing MODULE_DEVICE_TABLE. Fixes: 908e6b1d ("ASoC: codecs: lpass-va-macro: Add support to VA Macro") Signed-off-by:
-
Rob Herring authored
Commit e52f3f29 ("ASoC: audio-graph-card: Refactor schema") added an 'allOf' entry, but one is already present in the schema. Multiple keys is not valid and results in an error: ruamel.yaml.constructor.DuplicateKeyError: while constructing a mapping in "<unicode string>", line 4, column 1 found duplicate key "allOf" with value "[]" (original value: "[]") in "<unicode string>", line 262, column 1 Fixes: e52f3f29 ("ASoC: audio-graph-card: Refactor schema") Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Sameer Pujar <spujar@nvidia.com> Cc: alsa-devel@alsa-project.org Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201119161848.3379929-1-robh@kernel.orgSigned-off-by:
-
Jaska Uimonen authored
ASoC dapm controls currently don't support more than 2 channels. This is a problem for SOF-based devices where individual volume control cannot be provided on the 4 DMIC input path. If we want to provide controls for more than 2 channels, this patch suggests a simple solution based on an override of the info callback. For example, in the case with 4 channel DMIC PGAs, a sof_info callback would be used. Mono and stereo cases will keep using the existing dapm info callback. A longer-term solution would be to remove the limits to 2 channels in ASoC/DAPM/topology. This is a topic Intel is currently looking into, e.g. by removing the use of 'reg' and 'rreg' fields and use arrays instead. Such changes will be rather intrusive and touch multiple codec and platform drivers. Removing restrictions is the right thing to do, but this will need to be done in steps with lots of validation. Signed-off-by:
Jaska Uimonen <jaska.uimonen@linux.intel.com> Reviewed-by:
-
Jiaxin Yu authored
This reverts commit 08651373. ("dt-bindings: mediatek: mt6359: Add new property for mt6359") Remove unused property "LDO_VAUD18-supply" in mt6359codec. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1605841573-1442-3-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
Jiaxin Yu authored
Mt6359 platform device is instantiated by mfd_add_devices(). In the case, dev->of_node is NULL so that always fails to get the regulator_dev. Use regualator-name "vaud18" that in dts node instead of "LDO_VAUD19-supply". So that we can get regulator_dev through regulator_lookup_by_name() directly. Fixes: 64a70744 ("ASoC: Fix vaud18 power leakage of mt6359") Signed-off-by:
-
- 19 Nov, 2020 27 commits
-
-
Pierre-Louis Bossart authored
Now that we have all the support needed for coexistence between ACPI drivers for Broadwell, remove mutual exclusion in the Kconfig file. The selection is done by playing with the snd_intel_dspcfg module 'dsp_driver' parameter. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
On Haswell/Broadwell/Baytrail/Braswell, the DSP is not used for the HDMI/DP interface, and setting the dsp_driver parameter to a value > 1 has the side effect of preventing the HDaudio legacy driver from probing. The DSP driver selection should really only handle cases where a DSP is actually used. This patch traps all known PCI devices and makes sure the HDaudio driver can always be probed. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Pierre-Louis Bossart authored
Follow PCI example and stop the probe when another driver is desired for the same ACPI HID. Signed-off-by:
-
Pierre-Louis Bossart authored
Remove last hard-coded build-time dependency Signed-off-by:
-
Pierre-Louis Bossart authored
Add ACPI IDs for Broadwell (and Haswell for consistency). This addition is required for dynamic selection of drivers on those devices. Signed-off-by:
-
Pierre-Louis Bossart authored
Now that we have all the support needed for coexistence between ACPI drivers for Baytrail and Cherrytrail, remove mutual exclusion in the Kconfig file. The selection is done by playing with the snd_intel_dsp module parameter. Signed-off-by:
-
Pierre-Louis Bossart authored
Follow PCI example and stop the probe when another driver is desired for the same ACPI HID. Signed-off-by:
-
Pierre-Louis Bossart authored
Follow PCI example and stop the probe when another driver is desired for the same ACPI HID. Signed-off-by:
-
Pierre-Louis Bossart authored
The Atom/SST driver does not rely on ASoC power management, but the SOF driver does. Rather than using a hard-coded build-time assignment, we can set this pm_ops dynamically depending on what the parent is. That will remove the last build-time dependency and allow for coexistence of both SST and SOF drivers for Baytrail/Cherrytrail. Signed-off-by:
-
Pierre-Louis Bossart authored
To avoid hard-coded variations between SOF and SST drivers, set the card name and driver dynamically depending on the parent type. This is the first pass required to let distributions select which drivers to use with kernel parameters instead of build-time selection. Signed-off-by:
-
Pierre-Louis Bossart authored
Intel machine drivers are used by parent platform drivers based on closed-source firmware (Atom/SST and catpt) and SOF-based ones. In some cases for ACPI-based platforms, the behavior of machine drivers needs to be modified depending on the parent type, typically for card names and power management. An initial solution based on passing a boolean flag as a platform device parameter was tested earlier. Since it looked overkill, this patch suggests instead a simple string comparison to identify an SOF parent device/driver. Suggested-by:
-
Pierre-Louis Bossart authored
Mirror capabilities provided for PCI devices, so that distributions can select which ACPI driver is loaded at run-time with kernel parameters and DMI tables instead of forcing a build-time selection. The "legacy" option supported for HDaudio has no meaning here and will be ignored. The 'SST' driver based on closed-source firmware has the priority to avoid any impact on users, and the choice to use SOF is strictly opt-in. This may change at some point when the 'SST' driver is deprecated on Baytrail/Cherrytrail. Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: codecs: add support for LPASS Codec macros" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset adds support for two Codec Macro blocks( WSA and VA) available in Qualcomm LPASS (Low Power Audio SubSystem). There are WSA, VA, TX and RX Macros on LPASS IP, each of the Macro block has specific connectivity like WSA Macros are intended to connect to WSA Smart speaker codecs via SoundWire. VA Macro is intended for DMICs, and TX/RX for Analog codecs via SoundWire like other WCD Codecs to provide headphone/ear/lineout etc .. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. This patchset has been tested on support to Qualcomm Robotics RB5 Development Kit based on QRB5165 Robotics SoC. This board has 2 WSA881X smart speakers with onboard DMIC connected to internal LPASS codec via WSA and VA macros respectively. Thanks, srini -Changes since v2: - various unnecessary variable intializations removed, suggested by Pierre - fixed a static checker error - collected reviews for dt-bindings. - fixed licence headers as suggested by Pierre. Srinivas Kandagatla (6): ASoC: qcom: dt-bindings: add bindings for lpass wsa macro codec ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro ASoC: codecs: lpass-wsa-macro: add dapm widgets and route ASoC: qcom: dt-bindings: add bindings for lpass va macro codec ASoC: codecs: lpass-va-macro: Add support to VA Macro ASoC: codecs: lpass-va-macro: add dapm widgets and routes .../bindings/sound/qcom,lpass-va-macro.yaml | 67 + .../bindings/sound/qcom,lpass-wsa-macro.yaml | 69 + sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/lpass-va-macro.c | 1503 ++++++++++ sound/soc/codecs/lpass-wsa-macro.c | 2464 +++++++++++++++++ sound/soc/codecs/lpass-wsa-macro.h | 17 + 7 files changed, 4132 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml create mode 100644 sound/soc/codecs/lpass-va-macro.c create mode 100644 sound/soc/codecs/lpass-wsa-macro.c create mode 100644 sound/soc/codecs/lpass-wsa-macro.h -- 2.21.0
-
Ranjani Sridharan authored
Currently, the SND_SOC_DAPM_STREAM_START event is sent during pcm_prepare() but the SND_SOC_DAPM_STREAM_STOP event is sent only in dpcm_fe_dai_shutdown() after soc_pcm_close(). This results in an imbalance between when the DAPM widgets receive the PRE/POST_PMU/PMD events. So call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean() before the snd_soc_pcm_component_hw_free() to keep the stream_stop DAPM event balanced with the stream_start event in soc_pm_prepare(). Also, in order to prevent duplicate DAPM stream events, remove the call for DAPM STREAM_START event in dpcm_fe_dai_prepare() and the call for DAPM STREAM_STOP event in dpcm_fe_dai_shutdown(). Reviewed-by:
-
Kai Vehmanen authored
Part of PCM constraints are set based on DSP topology, but rest should be set based on hardware capabilities. Add PCM constraints for Intel platforms: - Add constraint for the period count to be integer. This avoids wrap-arounds of the DMA circular buffer in middle of a period. - Align period size to dword/32bit as per HDA spec. Both constraints are aligned with current implementation in snd-hda-intel driver. Signed-off-by:
-
Kai Vehmanen authored
Current SOF implementation limits period and buffer sizes to multiples of period_min. Period_min is defined in topology, but is in practise set to align with the SOF DSP timer tick (typically 1ms). While this approach helps user-space to avoid period sizes, which are not aligned to the DSP timer tick, it causes problems to applications which want to align data processing size to that of ALSA period size. One example is JACK audio server, which limits period sizes to power of two values. Other ALSA drivers where audio data transfer is driven by a timer tick, like USB, do not constraint period and buffer sizes to exact multiple of the timer tick. To align SOF to follow the same behaviour, drop the additional alignment constraints. As a side-effect, this patch can cause irregularity to period wakeup timing. This happens when application chooses settings which were previously forbidden. For example, if application configures period size to 2^14 bytes and audio config of S32_LE/2ch/48000Hz, one period represents 42.667ms of audio. Without this patch, this configuration is not allowed by SOF. With the patch applied, configuration is allowed but the wakeups are paced by the DSP timer tick, which is typically 1ms. Application will see period wakeups with a 42/43/42/43ms repeating pattern. Both approaches are valid within ALSA context, but relaxing the constraints is better aligned with existing applications and other ALSA drivers like USB audio. Signed-off-by:
-
Piotr Maziarz authored
Select WANT_DEV_COREDUMP for catpt driver. Signed-off-by:
Piotr Maziarz <piotrx.maziarz@linux.intel.com> Signed-off-by:
Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> -- Changes in v2: - change should be added to catpt only Acked-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20201117145223.21222-1-gustaw.lewandowski@linux.intel.comSigned-off-by:
-
Shengjiu Wang authored
On VF610, mclk0 = bus_clk; On i.MX6SX/6UL/6ULL/7D, mclk0 = mclk1; On i.MX7ULP, mclk0 = bus_clk; On i.MX8QM/8QXP, mclk0 = bus_clk; On i.MX8MQ/8MN/8MM/8MP, mclk0 = bus_clk; So add variable mclk0_is_mclk1 in fsl_sai_soc_data to distinguish these platforms. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1605768038-4582-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Krzysztof Kozlowski authored
COMMON_CLK is a user-selectable option with its own dependencies. The most important dependency is !HAVE_LEGACY_CLK. User-selectable drivers should not select COMMON_CLK because they will create a dependency cycle and build failures. For example on MIPS a configuration with COMMON_CLK (selected by SND_SUN8I_CODEC) and HAVE_LEGACY_CLK (selected by SOC_RT305X) is possible: WARNING: unmet direct dependencies detected for COMMON_CLK Depends on [n]: !HAVE_LEGACY_CLK [=y] Selected by [y]: - SND_SUN8I_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (ARCH_SUNXI || COMPILE_TEST [=y]) && OF [=y] && (MACH_SUN8I || ARM64 && ARCH_SUNXI || COMPILE_TEST [=y]) /usr/bin/mips-linux-gnu-ld: drivers/clk/clk.o: in function `clk_set_rate': (.text+0xaeb4): multiple definition of `clk_set_rate'; arch/mips/ralink/clk.o:(.text+0x88): first defined here Signed-off-by:Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20201118201420.4878-1-krzk@kernel.orgSigned-off-by:
-
Pierre-Louis Bossart authored
For some reason this ops is missing in 2 out of the 3 broadwell drivers. Add to make sure ASoC takes care of power management. Tested-by:
-
Pierre-Louis Bossart authored
For some reason this ops is missing in 2 out of the 3 broadwell drivers. Add to make sure ASoC takes care of power management. Tested-by:
-
Srinivas Kandagatla authored
Add dapm widgets and routes for this codec. Signed-off-by:
-
Srinivas Kandagatla authored
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec VA macro block which is used for connecting with DMICs. This patch adds support to the codec part of the VA Macro block Signed-off-by:
-
Srinivas Kandagatla authored
This binding is for LPASS has internal codec VA macro which is for connecting with DMICs. Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds dapm widgets and routes on this codec Signed-off-by:
-
Srinivas Kandagatla authored
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec WSA macro block which is used for connecting with WSA Smart speakers over soundwire. This patch adds support to the codec part of the WSA Macro block. Signed-off-by:
-
Srinivas Kandagatla authored
This binding is for LPASS has internal codec WSA macro which is for connecting with WSA Smart speakers. Signed-off-by:
-
- 18 Nov, 2020 2 commits
-
-
Mark Brown authored
Merge series "ASoC: soc-component: add snd_soc_component_xxx()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are v2 of snd_soc_component_compr_xxx() function patches. I think component related function should be implemented at soc-component.c, otherwise it is confusable to read. These are for it. v1 -> v2 - fixup function return timing on snd_soc_component_compr_get_params() snd_soc_component_compr_get_metadata() - use mutex at compr side on snd_soc_component_compr_get_caps() snd_soc_component_compr_get_codec_caps() snd_soc_component_compr_copy() Link: https://lore.kernel.org/r/878sb78ac4.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (12): ASoC: soc-component: add snd_soc_component_compr_open() ASoC: soc-component: add snd_soc_component_compr_free() ASoC: soc-component: add snd_soc_component_compr_trigger() ASoC: soc-component: add snd_soc_component_compr_set_params() ASoC: soc-component: add snd_soc_component_compr_get_params() ASoC: soc-component: add snd_soc_component_compr_get_caps() ASoC: soc-component: add snd_soc_component_compr_get_codec_caps() ASoC: soc-component: add snd_soc_component_compr_ack() ASoC: soc-component: add snd_soc_component_compr_pointer() ASoC: soc-component: add snd_soc_component_compr_copy() ASoC: soc-component: add snd_soc_component_compr_set_metadata() ASoC: soc-component: add snd_soc_component_compr_get_metadata() include/sound/soc-component.h | 22 +++ sound/soc/soc-component.c | 255 ++++++++++++++++++++++++++++++++ sound/soc/soc-compress.c | 263 ++++------------------------------ 3 files changed, 303 insertions(+), 237 deletions(-) -- 2.25.1
-
Mark Brown authored
This series updates Sameer's patch to repartition the graph card binding schema and incorporate the OF graph schema. The schema was also mixing card node and DAI node properties, so I've split the DAI part (the 'port' node) into a separate schema. There's another problem that 'frame-master' and 'bitclock-master' have inconsistent types of boolean and phandle. Having the properties just point to the local or remote endpoint within an endpoint node is kind of pointless. We should have gone with just boolean, but looks like we already have several users. MMP OLPC is the one platform using boolean, but it happens to work because the properties are effectively ignored and CPU DAI as the master is the default. Rob Rob Herring (3): ASoC: dt-bindings: Use OF graph schema ASoC: dt-bindings: marvell,mmp-sspa: Use audio-graph-port schema ASoC: dt-bindings: Refine 'frame-master' and 'bitclock-master' type Sameer Pujar (1): ASoC: audio-graph-card: Refactor schema .../bindings/sound/audio-graph-card.yaml | 106 +----------------- .../bindings/sound/audio-graph-port.yaml | 72 ++++++++++++ .../bindings/sound/audio-graph.yaml | 45 ++++++++ .../bindings/sound/marvell,mmp-sspa.yaml | 25 +---- .../bindings/sound/renesas,rsnd.yaml | 12 +- .../bindings/sound/simple-card.yaml | 6 +- 6 files changed, 132 insertions(+), 134 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-port.yaml create mode 100644 Documentation/devicetree/bindings/sound/audio-graph.yaml base-commit: e2e99930ec006c6fe1d62af339a765ade71a0d9a -- 2.25.1
-
