After successfully probed, ci->role_switch would only be NULL or a valid
pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap
it with IS_ERR, otherwise the logic is wrong.

Fixes: e1b5d2be ("usb: chipidea: core: handle usb role switch in a common way")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20221215055409.3760523-1-xu.yang_2@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB3 ports on xHC hosts may have retimers that cause too long
exit latency to work with native USB3 U1/U2 link power management states.

For now only use usb_acpi_port_lpm_incapable() to evaluate if port lpm
should be disabled while setting up the USB3 roothub.

Other ways to identify lpm incapable ports can be added here later if
ACPI _DSM does not exist.

Limit this to Intel hosts for now, this is to my knowledge only
an Intel issue.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-8-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a helper to evaluate ACPI usb device specific method (_DSM) provided
in case the USB3 port shouldn't enter U1 and U2 link states.

This _DSM was added as port specific retimer configuration may lead to
exit latencies growing beyond U1/U2 exit limits, and OS needs a way to
find which ports can't support U1/U2 link power management states.

This _DSM is also used by windows:
Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm-

Some patch issues found in testing resolved by Ron Lee

Cc: stable@vger.kernel.org
Tested-by: Ron Lee <ron.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One USB3 roothub port may support link power management, while another
root port on the same xHC can't due to different retimers used for
the ports.

This is the case with Intel Alder Lake, and possible future platforms
where retimers used for USB4 ports cause too long exit latecy to
enable native USB3 lpm U1 and U2 states.

Add a flag in the xhci port structure to indicate if the port is
lpm_incapable, and check it while calculating exit latency.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow PCI hosts to check and tune roothub and port settings
before the hub is up and running.

This override is needed to turn off U1 and U2 LPM for some ports
based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio
values for Intel xHC hosts.

Usb core calls the host update_hub_device once it creates a hub.

Entering U1 or U2 link power save state on ports with this limitation
will cause link to fail, turning the usb device unusable in that setup.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-5-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race
and cause null pointer dereference when host suddenly dies.

Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id]
virt device at the same time that xhci_kill_endpoint_urbs() tries to
loop through all the device's endpoints, checking if there are any
cancelled urbs left to give back.

hold the xhci spinlock while freeing the virt device

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the host controller is not responding, all URBs queued to all
endpoints need to be killed. This can cause a kernel panic if we
dereference an invalid endpoint.

Fix this by using xhci_get_virt_ep() helper to find the endpoint and
checking if the endpoint is valid before dereferencing it.

[233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead
[233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8

[233311.853964] pc : xhci_hc_died+0x10c/0x270
[233311.853971] lr : xhci_hc_died+0x1ac/0x270

[233311.854077] Call trace:
[233311.854085]  xhci_hc_died+0x10c/0x270
[233311.854093]  xhci_stop_endpoint_command_watchdog+0x100/0x1a4
[233311.854105]  call_timer_fn+0x50/0x2d4
[233311.854112]  expire_timers+0xac/0x2e4
[233311.854118]  run_timer_softirq+0x300/0xabc
[233311.854127]  __do_softirq+0x148/0x528
[233311.854135]  irq_exit+0x194/0x1a8
[233311.854143]  __handle_domain_irq+0x164/0x1d0
[233311.854149]  gic_handle_irq.22273+0x10c/0x188
[233311.854156]  el1_irq+0xfc/0x1a8
[233311.854175]  lpm_cpuidle_enter+0x25c/0x418 [msm_pm]
[233311.854185]  cpuidle_enter_state+0x1f0/0x764
[233311.854194]  do_idle+0x594/0x6ac
[233311.854201]  cpu_startup_entry+0x7c/0x80
[233311.854209]  secondary_start_kernel+0x170/0x198

Fixes: 50e8725e ("xhci: Refactor command watchdog and fix split string.")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow devices to have dma operations beyond 64K, and avoid warnings such
as:

xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536]

Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The commit e00b488e ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS")
blacklists UAS for all of RTL9210 enclosures.

The RTL9210 controller was advertised with UAS since its release back in
2019 and was shipped with a lot of enclosure products with different
firmware combinations.

Blacklist UAS only for HIKSEMI MD202.

This should hopefully be replaced with more robust method than just
comparing strings.  But with limited information [1] provided thus far
(dmesg when the device is plugged in, which includes manufacturer and
product, but no lsusb -v to compare against), this is the best we can do
for now.

[1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com

Fixes: e00b488e ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS")
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hongling Zeng <zenghongling@kylinos.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The syzbot fuzzer and Gerald Lee have identified a use-after-free bug
in the gadgetfs driver, involving processes concurrently mounting and
unmounting the gadgetfs filesystem.  In particular, gadgetfs_fill_super()
can race with gadgetfs_kill_sb(), causing the latter to deallocate
the_device while the former is using it.  The output from KASAN says,
in part:

BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline]
BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline]
BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline]
BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline]
BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline]
BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline]
BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086
Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689

CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
 <TASK>
...
 atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline]
 __refcount_sub_and_test include/linux/refcount.h:272 [inline]
 __refcount_dec_and_test include/linux/refcount.h:315 [inline]
 refcount_dec_and_test include/linux/refcount.h:333 [inline]
 put_dev drivers/usb/gadget/legacy/inode.c:159 [inline]
 gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086
 deactivate_locked_super+0xa7/0xf0 fs/super.c:332
 vfs_get_super fs/super.c:1190 [inline]
 get_tree_single+0xd0/0x160 fs/super.c:1207
 vfs_get_tree+0x88/0x270 fs/super.c:1531
 vfs_fsconfig_locked fs/fsopen.c:232 [inline]

The simplest solution is to ensure that gadgetfs_fill_super() and
gadgetfs_kill_sb() are serialized by making them both acquire a new
mutex.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+33d7ad66d65044b93f16@syzkaller.appspotmail.com
Reported-and-tested-by: Gerald Lee <sundaywind2004@gmail.com>
Link: https://lore.kernel.org/linux-usb/CAO3qeMVzXDP-JU6v1u5Ags6Q-bb35kg3=C6d04DjzA9ffa5x1g@mail.gmail.com/
Fixes: e5d82a73 ("vfs: Convert gadgetfs to use the new mount API")
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Y6XCPXBpn3tmjdCC@rowland.harvard.eduSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After doorbell DMA fetches the TRB. If during dequeuing request
driver changes NORMAL TRB to LINK TRB but doesn't delete it from
controller cache then controller will handle cached TRB and packet
can be lost.

The example scenario for this issue looks like:
1. queue request - set doorbell
2. dequeue request
3. send OUT data packet from host
4. Device will accept this packet which is unexpected
5. queue new request - set doorbell
6. Device lost the expected packet.

By setting DFLUSH controller clears DRDY bit and stop DMA transfer.

Fixes: 7733f6c3 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20221115100039.441295-1-pawell@cadence.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'thunderbolt-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:
  "thunderbolt: Fixes for v6.2-rc5
  This includes fixes for:
    - on-board retimer scan return value
    - runtime PM during tb_retimer_scan()
    - USB3 link rate calculation
    - XDomain lane bonding.
  All these have been in linux-next with no reported issues."

* tag 'thunderbolt-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Disable XDomain lane 1 only in software connection manager
  thunderbolt: Use correct function to calculate maximum USB3 link rate
  thunderbolt: Do not call PM runtime functions in tb_retimer_scan()
  thunderbolt: Do not report errors if on-board retimers are found

When firmware connection manager is in use we should not touch the lane
adapter (well or any) configuration space so do this only when we know
that the software connection manager is active.

Fixes: 8e1de704 ("thunderbolt: Add support for XDomain lane bonding")
Cc: stable@vger.kernel.org
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We need to take minimum of both sides of the USB3 link into consideration,
not just the downstream port. Fix this by calling tb_usb3_max_link_rate()
instead.

Fixes: 0bd680cd ("thunderbolt: Add USB3 bandwidth management")
Cc: stable@vger.kernel.org
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We cannot call PM runtime functions in tb_retimer_scan() because it will
also be called when retimers are scanned from userspace (happens when
there is no device connected on ChromeOS for instance) and at the same
USB4 port runtime resume hook. This leads to hang because neither can
proceed.

Fix this by runtime resuming USB4 ports in tb_scan_port() instead. This
makes sure the ports are runtime PM active when retimers are added under
it while avoiding the reported hang as well.
Reported-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Fixes: 1e56c88a ("thunderbolt: Runtime resume USB4 port when retimers are scanned")
Cc: stable@vger.kernel.org
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Pull powerpc fixes from Michael Ellerman:

 - Three fixes for various bogosity in our linker script, revealed
   by the recent commit which changed discard behaviour with some
   toolchains.

* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vmlinux.lds: Don't discard .comment
  powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
  powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT

Pull memblock fixes from Mike Rapoport:
 "Small fixes in kernel-doc and tests:

   - Fix kernel-doc for memblock_phys_free() to use correct names for
     the counterpart allocation methods

   - Fix compilation error in memblock tests"

* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Fix doc for memblock_phys_free
  memblock tests: Fix compilation error.

Pull NFS client fixes from Trond Myklebust:

 - Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls

 - Fix a broken coalescing test in the pNFS file layout driver

 - Ensure that the access cache rcu path also applies the login test

 - Fix up for a sparse warning

* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix up a sparse warning
  NFS: Judge the file access cache's timestamp in rcu path
  pNFS/filelayout: Fix coalescing test for single DS
  SUNRPC: ensure the matching upcall is in-flight upon downcall

Pull cifs fixes from Steve French:
 "cifs/smb3 client fixes:

   - two multichannel fixes

   - three reconnect fixes

   - unmap fix"

* tag '6.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix interface count calculation during refresh
  cifs: refcount only the selected iface during interface update
  cifs: protect access of TCP_Server_Info::{dstaddr,hostname}
  cifs: fix race in assemble_neg_contexts()
  cifs: ignore ipc reconnect failures during dfs failover
  cifs: Fix kmap_local_page() unmapping

Pull devicetree fixes from Rob Herring:

 - Fix DT memory scanning for some MIPS boards when memory is not
   specified in DT

 - Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
   attempt broke PS3 (and possibly other PPC platforms).

 - Fix constraints in QCom Soundwire schema

* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
  Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
  dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
  of/fdt: run soc memory setup when early_init_dt_scan_memory fails

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 6.2-rc3 that resolve some
  reported issues. They include:

   - of-reported ulpi problem, so the offending commit is reverted

   - dwc3 driver bugfixes for recent changes

   - fotg210 fixes

  Most of these have been in linux-next for a while, the last few were
  on the mailing list for a long time and passed all the 0-day bot
  testing so all should be fine with them as well"

* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Ignore End Transfer delay on teardown
  usb: dwc3: xilinx: include linux/gpio/consumer.h
  usb: fotg210-udc: fix error return code in fotg210_udc_probe()
  usb: fotg210: fix OTG-only build
  Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

Pull rdma fixes from Jason Gunthorpe:
 "Most noticeable is that Yishai found a big data corruption regression
  due to a change in the scatterlist:

   - Do not wrongly combine non-contiguous pages in scatterlist

   - Fix compilation warnings on gcc 13

   - Oops when using some mlx5 stats

   - Bad enforcement of atomic responder resources in mlx5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to merge contiguous pages into the last SG properly
  RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
  RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
  RDMA/srp: Move large values to a new enum for gcc13

Merge tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix single *.ko build

 - Fix module builds when vmlinux.o or Module.symver is missing

* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: readd -w option when vmlinux.o or Module.symver is missing
  kbuild: fix single *.ko build

Pull drm fixes from Daniel Vetter:
 "Still not much, but more than last week. Dave should be back next week
  from the beaching.

  drivers:
   - i915-gvt fixes
   - amdgpu/kfd fixes
   - panfrost bo refcounting fix
   - meson afbc corruption fix
   - imx plane width fix

  core:
   - drm/sched fixes
   - drm/mm kunit test fix
   - dma-buf export error handling fixes"

* tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/amd/display: Enable Freesync Video Mode by default"
  drm/i915/gvt: fix double free bug in split_2MB_gtt_entry
  drm/i915/gvt: use atomic operations to change the vGPU status
  drm/i915/gvt: fix vgpu debugfs clean in remove
  drm/i915/gvt: fix gvt debugfs destroy
  drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
  drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0
  drm/amdkfd: Fix kernel warning during topology setup
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/imx: ipuv3-plane: Fix overlay plane width
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/virtio: Fix memory leak in virtio_gpu_object_create()
  drm/meson: Reduce the FIFO lines held when AFBC is not used
  drm/tests: reduce drm_mm_test stack usage
  drm/panfrost: Fix GEM handle creation ref-counting
  drm/plane-helper: Add the missing declaration of drm_atomic_state
  dma-buf: fix dma_buf_export init order v2

TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:

  tpm tpm0: A TPM error (28) occurred continue selftest
  ...
  tpm tpm0: A TPM error (28) occurred attempting get random
  ...
  tpm tpm0: Error (28) sending savestate before suspend
  tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
  tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
  tpm_tis 00:08: PM: failed to suspend: error 28
  PM: Some devices failed to suspend, or early wake event detected

This issue was partially fixed by 23393c64 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.

In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.

Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.

The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is.  So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.

While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).

Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "The big change here is obviously the revert of the pktcdvd driver
  removal. Outside of that, just minor tweaks. In detail:

   - Re-instate the pktcdvd driver, which necessitates adding back
     bio_copy_data_iter() and the fops->devnode() hook for now (me)

   - Fix for splitting of a bio marked as NOWAIT, causing either nowait
     reads or writes to error with EAGAIN even if parts of the IO
     completed (me)

   - Fix for ublk, punting management commands to io-wq as they can all
     easily block for extended periods of time (Ming)

   - Removal of SRCU dependency for the block layer (Paul)"

* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
  block: Remove "select SRCU"
  Revert "pktcdvd: remove driver."
  Revert "block: remove devnode callback from struct block_device_operations"
  Revert "block: bio_copy_data_iter"
  ublk: honor IO_URING_F_NONBLOCK for handling control command
  block: don't allow splitting of a REQ_NOWAIT bio
  block: handle bio_split_to_limits() NULL return

Pull io_uring fixes from Jens Axboe:
 "A few minor fixes that should go into the 6.2 release:

   - Fix for a memory leak in io-wq worker creation, if we ultimately
     end up canceling the worker creation before it gets created (me)

   - lockdep annotations for the CQ locking (Pavel)

   - A regression fix for CQ timeout handling (Pavel)

   - Ring pinning around deferred task_work fix (Pavel)

   - A trivial member move in struct io_ring_ctx, saving us some memory
     (me)"

* tag 'io_uring-2023-01-06' of git://git.kernel.dk/linux:
  io_uring: fix CQ waiting timeout handling
  io_uring: move 'poll_multi_queue' bool in io_ring_ctx
  io_uring: lockdep annotate CQ locking
  io_uring: pin context while queueing deferred tw
  io_uring/io-wq: free worker if task_work creation is canceled

Pull arm TIF_NOTIFY_SIGNAL fixup from Jens Axboe:
 "Hui Tang reported a performance regressions with _TIF_WORK_MASK in
  newer kernels, which he tracked to a change that went into 5.11. After
  this change, we'll call do_work_pending() more often than we need to,
  because we're now testing bits 0..15 rather than just 0..7.

  Shuffle the bits around to avoid this"

* tag 'tif-notify-signal-2023-01-06' of git://git.kernel.dk/linux:
  ARM: renumber bits related to _TIF_WORK_MASK

Pull ceph fixes from Ilya Dryomov:
 "Two file locking fixes from Xiubo"

* tag 'ceph-for-6.2-rc3' of https://github.com/ceph/ceph-client:
  ceph: avoid use-after-free in ceph_fl_release_lock()
  ceph: switch to vfs_inode_has_locks() to fix file lock bug

Pull UDF fixes from Jan Kara:
 "Two fixups of the UDF changes that went into 6.2-rc1"

* tag 'fixes_for_v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: initialize newblock to 0
  udf: Fix extension of the last extent in the file

Pull btrfs fixes from David Sterba:
 "A few more regression and regular fixes:

   - regressions:
       - fix assertion condition using = instead of ==
       - fix false alert on bad tree level check
       - fix off-by-one error in delalloc search during lseek

   - fix compat ro feature check at read-write remount

   - handle case when read-repair happens with ongoing device replace

   - updated error messages"

* tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix compat_ro checks against remount
  btrfs: always report error in run_one_delayed_ref()
  btrfs: handle case when repair happens with dev-replace
  btrfs: fix off-by-one in delalloc search during lseek
  btrfs: fix false alert on bad tree level check
  btrfs: add error message for metadata level mismatch
  btrfs: fix ASSERT em->len condition in btrfs_get_extent

Pull RISC-V fixes from Palmer Dabbelt:

 - use the correct mask for c.jr/c.jalr when decoding instructions

 - build fix for get_user() to avoid a sparse warning

* tag 'riscv-for-linus-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: uaccess: fix type of 0 variable on error in get_user()
  riscv, kprobes: Stricter c.jr/c.jalr decoding

Merge tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix segfault when trying to process tracepoints present in a
   perf.data file and not linked with libtraceevent.

 - Fix build on uClibc systems by adding missing sys/types.h include,
   that was being obtained indirectly which stopped being the case when
   tools/lib/traceevent was removed.

 - Don't show commands in 'perf help' that depend on linking with
   libtraceevent when not building with that library, which is now a
   possibility since we no longer ship a copy in tools/lib/traceevent.

 - Fix failure in 'perf test' entry testing the combination of 'perf
   probe' user space function + 'perf record' + 'perf script' where it
   expects a backtrace leading to glibc's inet_pton() from 'ping' that
   now happens more than once with glibc 2.35 for IPv6 addreses.

 - Fix for the inet_pton perf test on s/390 where
   'text_to_binary_address' now appears on the backtrace.

 - Fix build error on riscv due to missing header for 'struct
   perf_sample'.

 - Fix 'make -C tools perf_install' install variant by not propagating
   the 'subdir' to submakes for the 'install_headers' targets.

 - Fix handling of unsupported cgroup events when using BPF counters in
   'perf stat'.

 - Count all cgroups, not just the last one when using 'perf stat' and
   combining --for-each-cgroup with --bpf-counters.

   This makes the output using BPF counters match the output without
   using it, which was the intention all along, the output should be the
   same using --bpf-counters or not.

 - Fix 'perf lock contention' core dump related to not finding the
   "__sched_text_end" symbol on s/390.

 - Fix build failure when HEAD is signed: exclude the signature from the
   version string.

 - Add missing closedir() calls to in perf_data__open_dir(), plugging a
   fd leak.

* tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Fix build on uClibc systems by adding missing sys/types.h include
  perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
  perf stat: Fix handling of unsupported cgroup events when using BPF counters
  perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
  perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
  perf build: Don't propagate subdir to submakes for install_headers
  perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
  perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
  perf tools: Don't include signature in version strings
  perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
  perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
  perf tools: Fix resources leak in perf_data__open_dir()

Pull perf fix from Ingo Molnar:
 "Intel RAPL updates for new model IDs"

* tag 'perf-urgent-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Add support for Intel Emerald Rapids
  perf/x86/rapl: Add support for Intel Meteor Lake
  perf/x86/rapl: Treat Tigerlake like Icelake

Pull crypto fixes from Herbert Xu:
 "This fixes a CFI crash in arm64/sm4 as well as a regression in the
  caam driver"

* tag 'v6.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/sm4 - fix possible crash with CFI enabled
  crypto: caam - fix CAAM io mem access in blob_gen

If we delay sending End Transfer for Setup TRB to be prepared, we need
to check if the End Transfer was in preparation for a driver
teardown/soft-disconnect. In those cases, just send the End Transfer
command without delay.

In the case of soft-disconnect, there's a very small chance the command
may not go through immediately. But should it happen, the Setup TRB will
be prepared during the polling of the controller halted state, allowing
the command to go through then.

In the case of disabling endpoint due to reconfiguration (e.g.
set_interface(alt-setting) or usb reset), then it's driven by the host.
Typically the host wouldn't immediately cancel the control request and
send another control transfer to trigger the End Transfer command
timeout.

Fixes: 4db0fbb6 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:

drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
  207 |         reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~
      |                      devm_clk_get_optional

Fixes: ca05b382 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (*err < 0)
            ^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.

Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com>