- 20 Mar, 2020 21 commits
-
-
Yuantian Tang authored
Cooling-maps doesn't have to be a required property because there may be no cooling device on system, or there are no enough cooling devices for each thermal zone in multiple thermal zone cases since cooling devices can't be shared. So make this property optional to remove such limitations. For thermal zones with no cooling-maps, there could be critic trips that can trigger CPU reset or shutdown. So they still can take actions. Signed-off-by:
Yuantian Tang <andy.tang@nxp.com> Reviewed-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200309045411.21859-1-andy.tang@nxp.com
-
Rob Herring authored
There's no need to specify 'maxItems' with the same value as the number of entries in 'items'. A meta-schema update will catch future cases. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Rob Herring authored
There's no need to specify 'maxItems' with the same value as the number of entries in 'items'. A meta-schema update will catch future cases. Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by:
Baolin Wang <baolin.wang7@gmail.com> Signed-off-by:
-
Anson Huang authored
imx_thermal_unregister_legacy_cooling() should be used for handling legacy cpufreq cooling cleanups in .remove callback instead of calling cpufreq_cooling_unregister() and cpufreq_cpu_put() directly, especially for !CONFIG_CPU_FREQ scenario, no operation needed for handling legacy cpufreq cooling cleanups at all. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
-
Anson Huang authored
Sort includes alphabetically for consistency, and take this chance to remove unused include of of_address.h. Signed-off-by:
-
Anson Huang authored
Use devm_add_action_or_reset() to handle all cleanups of failure in .probe and .remove, then .remove callback can be dropped. Signed-off-by:
-
Niklas Söderlund authored
With the ctemp value returned instead of cached in the private data structure their is no need to take the lock when translating ctemp into a temperature. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Niklas Söderlund authored
There is no need to cache the ctemp value in the private data structure as it's always prefetched before it's used. Remove it from the structure and have rcar_thermal_update_temp return the value instead of storing it. Signed-off-by:
-
Niklas Söderlund authored
Since commit a1ade565 ("thermal: rcar: check every rcar_thermal_update_temp() return value") the temperature is always read in rcar_thermal_get_current_temp() so comparing it before and after enabling interrupts have little effect. Remove the check and always update the thermal zone when we get an interrupt that the temperature have changed. Signed-off-by:
-
Amit Kucheria authored
IRQF_TRIGGER_HIGH is already specified through devicetree interrupts property. Remove it from code. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Amit Kucheria authored
Document ul_lock, threshold and control structure members and make the following kernel-doc invocation happy: $ scripts/kernel-doc -v -none drivers/thermal/qcom/* drivers/thermal/qcom/qcom-spmi-temp-alarm.c:105: info: Scanning doc for qpnp_tm_get_temp_stage drivers/thermal/qcom/tsens-common.c:18: info: Scanning doc for struct tsens_irq_data drivers/thermal/qcom/tsens-common.c:130: info: Scanning doc for tsens_hw_to_mC drivers/thermal/qcom/tsens-common.c:163: info: Scanning doc for tsens_mC_to_hw drivers/thermal/qcom/tsens-common.c:245: info: Scanning doc for tsens_set_interrupt drivers/thermal/qcom/tsens-common.c:268: info: Scanning doc for tsens_threshold_violated drivers/thermal/qcom/tsens-common.c:362: info: Scanning doc for tsens_critical_irq_thread drivers/thermal/qcom/tsens-common.c:438: info: Scanning doc for tsens_irq_thread drivers/thermal/qcom/tsens.h:41: info: Scanning doc for struct tsens_sensor drivers/thermal/qcom/tsens.h:59: info: Scanning doc for struct tsens_ops drivers/thermal/qcom/tsens.h:494: info: Scanning doc for struct tsens_features drivers/thermal/qcom/tsens.h:513: info: Scanning doc for struct tsens_plat_data drivers/thermal/qcom/tsens.h:529: info: Scanning doc for struct tsens_context Signed-off-by:
-
Amit Kucheria authored
TSENS IP v2.3 onwards adds support for a watchdog to detect if the TSENS HW FSM is stuck. Add support to detect and restart the FSM in the driver. The watchdog is configured by the bootloader, we just enable the watchdog bark as a debug feature in the kernel. Signed-off-by:
-
Amit Kucheria authored
TSENS IP v2.x adds critical threshold interrupt support for each sensor in addition to the upper/lower threshold interrupt. Add support in the driver. While the critical interrupts themselves aren't currently used by Linux, the HW line is also used by the TSENS watchdog. So this patch acts as infrastructure to enable watchdog functionality for the TSENS IP. Signed-off-by:
-
Amit Kucheria authored
We don't currently call put_device in case of successfully initialising the device. So we hold the reference and keep the device pinned forever. Allow control to fall through so we can use same code for success and error paths to put_device. As a part of this fixup, change devm_ioremap_resource to act on the same device pointer as that used to allocate regmap memory. That ensures that we are free to release op->dev after examining its resources. Signed-off-by:
-
Amit Kucheria authored
We already dereference the sensor and save it into a variable. Use the variable directly to make the code easier to read. Signed-off-by:
-
Amit Kucheria authored
All the sensor data is initialised at init time. Lock it down by passing it to functions as a constant. Signed-off-by:
-
Amit Kucheria authored
struct tsens_features is currently initialized as part of platform data at compile-time and not modifiable. We now have some usecases in feature detection across IP versions where it is more flexible to update the features after probing registers. Remove const qualifier from tsens_features and the encapsulating tsens_plat_data. Signed-off-by:
-
Niklas Söderlund authored
If the common register memory resource is not available the driver needs to fail gracefully to disable PM. Instead of returning the error directly store it in ret and use the already existing error path. Signed-off-by:
-
Anson Huang authored
Remove unused includes to simplify the code. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Thermal Sensor/Chip Internal Voltage Monitor in the R-Car M3-W+ (R8A77961) SoC. According to the R-Car Gen3 Hardware Manual Errata for Revision 2.00 of Jan 31, 2020, the thermal parameters for R-Car M3-W+ are the same as for R-Car M3-W. Signed-off-by:
-
Geert Uytterhoeven authored
Document R-Car M3-W+ (R8A77961) SoC bindings. Signed-off-by:
-
- 12 Mar, 2020 18 commits
-
-
Anson Huang authored
Add COMPILE_TEST support to i.MX8MM thermal driver for better compile testing coverage. Signed-off-by:
-
Yuantian Tang authored
Qoriq thermal driver is used by both PowerPC and ARM architecture. When built for PowerPC architecture, it reports error: undefined reference to `.__devm_regmap_init_mmio_clk' To fix it, select config REGMAP_MMIO. Fixes: 4316237b (thermal: qoriq: Convert driver to use regmap API) Signed-off-by:
-
Anson Huang authored
i.MX SCU thermal driver depends on IMX_SCU which does NOT have COMPILE_TEST enabled, so need to remove COMPILE_TEST for i.MX SCU thermal as well. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Anson Huang authored
Add "inline" to thermal_zone_of_get_sensor_id() function to avoid below build warning of !defined(CONFIG_THERMAL_OF). In file included from drivers/hwmon/hwmon.c:22: include/linux/thermal.h:382:12: warning: 'thermal_zone_of_get_sensor_id' defined but not used [-Wunused-function] 382 | static int thermal_zone_of_get_sensor_id(struct device_node *tz_np, Signed-off-by:
-
Anson Huang authored
Use __maybe_unused for power management related functions instead of #if CONFIG_PM_SLEEP to simplify the code. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Anson Huang authored
The i.MX SCU API strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs, use __packed __aligned(4) to avoid potential oopses. Signed-off-by:
-
Linus Walleij authored
This switches the TI SoC thermal driver to use GPIO descriptors instead of retrieveing a GPIO number from the device tree and requesting the GPIO separately. Cc: Keerthy <j-keerthy@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
The thermal subsystem may have relied on sysfs in 2008 when it was introduced, but these days the thermal zones will more often than not come from the hardware descriptions and not from sysfs. Drop the "Generic" phrases as well: there are no non-generic drivers that I know of, the thermal framework is by definition generic. Reword a bit and fix some grammar. [ Daniel Lezcano ] : fixed Randy's comment s/offers/offer/ Signed-off-by:
-
Anson Huang authored
i.MX8MM has a thermal monitoring unit(TMU) inside, it ONLY has one sensor for CPU, add support for reading immediate temperature of this sensor. Signed-off-by:
-
Anson Huang authored
Add thermal binding doc for Freescale's i.MX8MM Thermal Monitoring Unit. Signed-off-by:
-
Marek Szyprowski authored
Don't confuse user with meaningless warning about the failure of registering sensors in case of deferred probe. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Anson Huang authored
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller inside, the system controller is in charge of controlling power, clock and thermal sensors etc.. This patch adds i.MX system controller thermal driver support, Linux kernel has to communicate with system controller via MU (message unit) IPC to get each thermal sensor's temperature, it supports multiple sensors which are passed from device tree, please see the binding doc for details. Signed-off-by:
-
Anson Huang authored
This patch adds new API thermal_zone_of_get_sensor_id() to provide the feature of getting sensor ID from DT thermal zone's node. It's useful for thermal driver to register the specific thermal zone devices from DT in a common way. Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Anson Huang authored
NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system controller, the system controller is in charge of system power, clock and thermal sensors etc. management, Linux kernel has to communicate with system controller via MU (message unit) IPC to get temperature from thermal sensors, this patch adds binding doc for i.MX system controller thermal driver. Signed-off-by:
-
Freeman Liu authored
This patch adds the support for Spreadtrum thermal sensor controller, which can support maximum 8 sensors. Signed-off-by:
Freeman Liu <freeman.liu@unisoc.com> Co-developed-with: Baolin Wang <baolin.wang@unisoc.com> Signed-off-by:
-
Baolin Wang authored
Add the Spreadtrum thermal documentation. Signed-off-by:
Baolin Wang <baolin.wang@unisoc.com> Signed-off-by:
-
Niklas Söderlund authored
The desired behavior of the driver is to generate an interrupt and call thermal_zone_device_update() as soon as the temperature have changed more then one degree. When the set_trips operation was implemented it was believed that the trip window set by the framework would move around the current temperature and the hysteresis value described in devicetree. The behavior of the framework is however to set a window based on the trip points described in devicetree. Remove the set_trips operation which was not used correctly and update the temperatures that triggers interrupts directly from the interrupt handler. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
When devm_add_action() was turned into devm_add_action_or_reset() the curly brackets for the error case where kept but are not needed, remove them to match the style of the driver. Signed-off-by:
-
- 29 Feb, 2020 1 commit
-
-
Rajeshwari authored
Added configuration in dt-bindings for SC7180. Signed-off-by:
Rajeshwari <rkambl@codeaurora.org> Reviewed-by:
-
