Skip to content

L
linux
Switch branch/tag
  1. 22 Feb, 2017 2 commits
    • Aneesh Kumar K.V's avatar
      powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU · fda2d27d
      Aneesh Kumar K.V authored 
      We will set LPCR with correct value for radix during int. This make sure we
start with a sanitized value of LPCR. In case of kexec, cpus can have LPCR
value based on the previous translation mode we were running.

Fixes: fe036a06 ("powerpc/64/kexec: Fix MMU cleanup on radix")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: default avatarMichael Neuling <mikey@neuling.org>
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      fda2d27d
    • Naveen N. Rao's avatar
      powerpc/optprobes: Fix TOC handling in optprobes trampoline · f558b37b
      Naveen N. Rao authored 
      Optprobes on powerpc are limited to kernel text area. We decided to also
optimize kretprobe_trampoline since that is also in kernel text area.
However,we failed to take into consideration the fact that the same
trampoline is also used to catch function returns from kernel modules.
As an example:

  $ sudo modprobe kobject-example
  $ sudo bash -c "echo 'r foo_show+8' > /sys/kernel/debug/tracing/kprobe_events"
  $ sudo bash -c "echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable"
  $ sudo cat /sys/kernel/debug/kprobes/list
  c000000000041350  k  kretprobe_trampoline+0x0    [OPTIMIZED]
  d000000000e00200  r  foo_show+0x8  kobject_example
  $ cat /sys/kernel/kobject_example/foo
  Segmentation fault

With the below (trimmed) splat in dmesg:

  Unable to handle kernel paging request for data at address 0xfec40000
  Faulting instruction address: 0xc000000000041540
  Oops: Kernel access of bad area, sig: 11 [#1]
  ...
  NIP [c000000000041540] optimized_callback+0x70/0xe0
  LR [c000000000041e60] optinsn_slot+0xf8/0x10000
  Call Trace:
  [c0000000c7327850] [c000000000289af4] alloc_set_pte+0x1c4/0x860 (unreliable)
  [c0000000c7327890] [c000000000041e60] optinsn_slot+0xf8/0x10000
  --- interrupt: 700 at 0xc0000000c7327a80
	       LR = kretprobe_trampoline+0x0/0x10
  [c0000000c7327ba0] [c0000000003a30d4] sysfs_kf_seq_show+0x104/0x1d0
  [c0000000c7327bf0] [c0000000003a0bb4] kernfs_seq_show+0x44/0x60
  [c0000000c7327c10] [c000000000330578] seq_read+0xf8/0x560
  [c0000000c7327cb0] [c0000000003a1e64] kernfs_fop_read+0x194/0x260
  [c0000000c7327d00] [c0000000002f9954] __vfs_read+0x44/0x1a0
  [c0000000c7327d90] [c0000000002fb4cc] vfs_read+0xbc/0x1b0
  [c0000000c7327de0] [c0000000002fd138] SyS_read+0x68/0x110
  [c0000000c7327e30] [c00000000000b8e0] system_call+0x38/0xfc

Fix this by loading up the kernel TOC before calling into the kernel.
The original TOC gets restored as part of the usual pt_regs restore.

Fixes: 762df10b ("powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()")
Signed-off-by: default avatarNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      f558b37b
  3. 21 Feb, 2017 4 commits
    • Michael Roth's avatar
      powerpc/pseries: Advertise Hot Plug Event support to firmware · 3dbbaf20
      Michael Roth authored 
      With the inclusion of commit 333f7b76 ("powerpc/pseries: Implement
indexed-count hotplug memory add") and commit 75384347
("powerpc/pseries: Implement indexed-count hotplug memory remove"), we
now have complete handling of the RTAS hotplug event format as described
by PAPR via ACR "PAPR Changes for Hotplug RTAS Events".

This capability is indicated by byte 6, bit 2 (5 in IBM numbering) of
architecture option vector 5, and allows for greater control over
cpu/memory/pci hot plug/unplug operations.

Existing pseries kernels will utilize this capability based on the
existence of the /event-sources/hot-plug-events DT property, so we
only need to advertise it via CAS and do not need a corresponding
FW_FEATURE_* value to test for.
Signed-off-by: default avatarMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      3dbbaf20
    • Andrew Donnellan's avatar
      cxl: fix nested locking hang during EEH hotplug · 171ed0fc
      Andrew Donnellan authored 
      Commit 14a3ae34 ("cxl: Prevent read/write to AFU config space while AFU
not configured") introduced a rwsem to fix an invalid memory access that
occurred when someone attempts to access the config space of an AFU on a
vPHB whilst the AFU is deconfigured, such as during EEH recovery.

It turns out that it's possible to run into a nested locking issue when EEH
recovery fails and a full device hotplug is required.
cxl_pci_error_detected() deconfigures the AFU, taking a writer lock on
configured_rwsem. When EEH recovery fails, the EEH code calls
pci_hp_remove_devices() to remove the device, which in turn calls
cxl_remove() -> cxl_pci_remove_afu() -> pci_deconfigure_afu(), which tries
to grab the writer lock that's already held.

Standard rwsem semantics don't express what we really want to do here and
don't allow for nested locking. Fix this by replacing the rwsem with an
atomic_t which we can control more finely. Allow the AFU to be locked
multiple times so long as there are no readers.

Fixes: 14a3ae34 ("cxl: Prevent read/write to AFU config space while AFU not configured")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: default avatarAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: default avatarFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      171ed0fc
    • Douglas Miller's avatar
      powerpc/xmon: Dump memory in CPU endian format · 5e48dc0a
      Douglas Miller authored 
      Extend the dump command to allow display of 2, 4, and 8 byte words in
CPU endian format. Also adds dump command for "1 byte values" for the
sake of symmetry. New commands are:

  d1	dump 1 byte values
  d2	dump 2 byte values
  d4	dump 4 byte values
  d8	dump 8 byte values
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarDouglas Miller <dougmill@linux.vnet.ibm.com>
Acked-by: default avatarBalbir Singh <bsingharora@gmail.com>
      5e48dc0a
    • Nathan Fontenot's avatar
      powerpc/pseries: Revert 'Auto-online hotplugged memory' · 943db62c
      Nathan Fontenot authored 
      This reverts commit ec999072 ("powerpc/pseries: Auto-online
hotplugged memory"), and 9dc51281 ("powerpc: Fix unused function
warning 'lmb_to_memblock'").

Using the auto-online acpability does online added memory but does not
update the associated device struct to indicate that the memory is
online. This causes the pseries memory DLPAR code to fail when trying to
remove a LMB that was previously removed and added back. This happens
when validating that the LMB is removable.

This patch reverts to the previous behavior of calling device_online()
to online the LMB when it is DLPAR added and moves the lmb_to_memblock()
routine out of CONFIG_MEMORY_HOTREMOVE now that we call it for add.

Fixes: ec999072 ("powerpc/pseries: Auto-online hotplugged memory")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: default avatarNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      943db62c
  5. 20 Feb, 2017 1 commit
  7. 18 Feb, 2017 2 commits
    • Michael Ellerman's avatar
      Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next · 6c8f9ad5
      Michael Ellerman authored 
      Freescale updates from Scott:

"Highlights include 8xx breakpoints and perf, t1042rdb display support,
and board updates."
      6c8f9ad5
    • Nicholas Piggin's avatar
      powerpc/64: Implement clear_bit_unlock_is_negative_byte() · d11914b2
      Nicholas Piggin authored 
      Commit b91e1302 ("mm: optimize PageWaiters bit use for
unlock_page()") added a special bitop function to speed up
unlock_page(). Implement this for 64-bit powerpc.

This improves the unlock_page() core code from this:

	li	9,1
	lwsync
1:	ldarx	10,0,3,0
	andc	10,10,9
	stdcx.	10,0,3
	bne-	1b
	ori	2,2,0
	ld	9,0(3)
	andi.	10,9,0x80
	beqlr
	li	4,0
	b	wake_up_page_bit

To this:

	li	10,1
	lwsync
1:	ldarx	9,0,3,0
	andc	9,9,10
	stdcx.	9,0,3
	bne-	1b
	andi.	10,9,0x80
	beqlr
	li	4,0
	b	wake_up_page_bit

In a test of elapsed time for dd writing into 16GB of already-dirty
pagecache on a POWER8 with 4K pages, which has one unlock_page per 4kB
this patch reduced overhead by 1.1%:

    N           Min           Max        Median           Avg        Stddev
x  19         2.578         2.619         2.594         2.595         0.011
+  19         2.552         2.592         2.564         2.565         0.008
Difference at 95.0% confidence
	-0.030  +/- 0.006
	-1.142% +/- 0.243%
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
[mpe: Made 64-bit only until I can test it properly on 32-bit]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      d11914b2
  9. 17 Feb, 2017 17 commits
  11. 16 Feb, 2017 4 commits
  13. 15 Feb, 2017 10 commits
    • Rashmica Gupta's avatar
      powerpc/asm: Define STACK_PT_REGS_OFFSET macro in asm-offsets.c · 10d4cf18
      Rashmica Gupta authored 
      There are quite a few entries in asm-offests.c which look like:

  DEFINE(REG, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, reg));

So define a macro to do it once.
Signed-off-by: default avatarRashmica Gupta <rashmicy@gmail.com>
[mpe: Rename to STACK_PT_REGS_OFFSET for excruciating explicitness]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      10d4cf18
    • Rashmica Gupta's avatar
      powerpc/asm: Use OFFSET macro in asm-offsets.c · 45465615
      Rashmica Gupta authored 
      A lot of entries in asm-offests.c look like this:

  DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));

But there is a common macro, OFFSET, which makes this cleaner:

  OFFSET(TI_flags, thread_info, flags)

So use it.
Signed-off-by: default avatarRashmica Gupta <rashmicy@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      45465615
    • Al Viro's avatar
      powerpc/spufs: Get rid of broken fasync stuff · 7d7be3aa
      Al Viro authored 
      In all the years it's been in the tree it had never been used by
anything - it would instantly trigger BUG_ON() in fs/fcntl.c due to
bogus band argument (ie. POLLIN not POLL_IN) passed to kill_fasync().
Since nobody had ever used it in ten years, let's just rip it out and be
done with that.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      7d7be3aa
    • Michael Ellerman's avatar
      powerpc/64e: Fix bogus usage of WARN_ONCE() · 0d2b5cdc
      Michael Ellerman authored 
      WARN_ONCE() takes a condition and a format string. We were passing a
constant string as the condition, and the function name as the format
string. It would work, but the message would be just the function name.

Fix it by just using WARN_ONCE() directly instead of if (x) WARN_ONCE().
Noticed-by: default avatarGeliang Tang <geliangtang@163.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      0d2b5cdc
    • Gavin Shan's avatar
      drivers/pci/hotplug: Mask PDC interrupt if required · 454593e5
      Gavin Shan authored 
      We're supporting surprise hotplug on PCI slots behind root port
or PCIe switch downstream ports, which don't claim the capability
in hardware register (offset: PCIe cap + PCI_EXP_SLTCAP). PEX8718
is one of the examples. For those PCI slots, the PDC (Presence
Detection Change) event isn't reliable and the underly (skiboot)
firmware has best judgement.

This masks the PDC event when skiboot requests by "ibm,slot-broken-pdc"
property in PCI slot's device-tree node.
Reported-by: default avatarHank Chang <hankmax0000@gmail.com>
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: default avatarWillie Liauw <williel@supermicro.com.tw>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      454593e5
    • Gavin Shan's avatar
      drivers/pci/hotplug: Fix initial state for empty slot · d0c42497
      Gavin Shan authored 
      In PowerNV PCI hotplug driver, the initial PCI slot's state is set
to PNV_PHP_STATE_POPULATED if no PCI devices are connected to the
slot. The PCI devices that are hot added to the slot won't be probed
and populated because of the check in pnv_php_enable():

        /* Check if the slot has been configured */
        if (php_slot->state != PNV_PHP_STATE_REGISTERED)
                return 0;

This fixes the issue by leaving the slot in PNV_PHP_STATE_REGISTERED
state initially if nothing is connected to the slot.

Fixes: 360aebd8 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver")
Cc: stable@vger.kernel.org #v4.9+
Reported-by: default avatarHank Chang <hankmax0000@gmail.com>
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: default avatarWillie Liauw <williel@supermicro.com.tw>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      d0c42497
    • Gavin Shan's avatar
      drivers/pci/hotplug: Handle presence detection change properly · d7d55536
      Gavin Shan authored 
      The surprise hotplug is driven by interrupt in PowerNV PCI hotplug
driver. In the interrupt handler, pnv_php_interrupt(), we bail when
pnv_pci_get_presence_state() returns zero wrongly. It causes the
presence change event is always ignored incorrectly.

This fixes the issue by bailing on error (non-zero value) returned
from pnv_pci_get_presence_state().

Fixes: 360aebd8 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver")
Cc: stable@vger.kernel.org #v4.9+
Reported-by: default avatarHank Chang <hankmax0000@gmail.com>
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: default avatarWillie Liauw <williel@supermicro.com.tw>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      d7d55536
    • Balbir Singh's avatar
      powerpc/xmon: Enable disassembly files (compilation changes) · 5b102782
      Balbir Singh authored 
      After updating ppc-dis.c, ppc-opc.c and ppc.h the following changes were
made to enable compilation and working of xmon:

  1.  Remove all disassembler_info
  2.  Use xmon's printf/print_address to output data and addresses
      respectively.
  3.  All bfd_* types and casts have been removed.
  4.  Optimizations related to opcd_indices have been removed.
  5.  The dialect is set based on cpu features.
  6.  PPC_OPCODE_CLASSIC is no longer supported in the new
      disassembler.
  7.  VLE opcode parsing and printing has been stripped.
  8.  Coding style conventions used for those routines has
      been retained and it does not match our CodingStyle.
  9.  The highest supported dialect is POWER9.
  10. Defined ATTRIBUTE_UNUSED in ppc-dis.c.
  11. Defined _(x) in ppc-dis.c.

Finally, we remove the dependency on BROKEN so that XMON_DISASSEMBLY can
be enabled again.
Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      5b102782
    • Balbir Singh's avatar
      powerpc/xmon: Apply binutils changes to upgrade disassembly · 08d96e0b
      Balbir Singh authored 
      The following commit-ids from the binutils project were applied on the
xmon branch and relicensed with the permission of the authors under
GPLv2 for the following files:

  ppc-opc.c
  ppc-dis.c
  ppc.h

Working off of binutils commit 65b650b4c746 we have now moved up to
binutils commit a5721ba270dd.

Some commit logs have been taken verbatim, some are summarized for ease
of understanding.

Here is a summary of the commits:

 33e8d5ac613d PPC7450 New.  (powerpc_opcodes): Use it in dcba.
 c3d65c1ced61 New opcodes and mask
 8dbcd839b1bb Instruction Sorting
 91eb7075e370 (powerpc_opcodes): Fix the first two operands of dquaiq.
 548b1dcfcbab ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix.
 930bb4cfae30 Support optional L form mtmsr.
 de866fccd87d (powerpc_opcodes): Order and format.
 19a6653ce8c6 ppc e500mc support
 fa452fa6833c (ppc_cpu_t): New typedef.
 c8187e1509b2 (parse_cpu): Handle -m464.
 081ba1b3c08b Define. (PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI)
 9b4e57660d38 Rename altivec_or_spe to retain_flags. Handle -mvsx and -mpower7.
 899d85beadd0 (powerpc_opcodes): Enable rfci, mfpmr, mtpmr for e300.
 e1c93c699b7d (extract_sprg): Correct operand range check.
 2f3bb96af796 (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
 1cb0a7674666 (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test
 21169fcfadfa (print_insn_powerpc): Skip insn if it is deprecated
 80890a619b85 ("dcbt", "dcbtst")
 0e55be1624c2 ("lfdepx", "stfdepx")
 066be9f7bd8e (parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
 c72ab5f2c55d (powerpc_opcodes): Reorder the opcode table so that instructions
 69fe9ce501f5 (ppc_parse_cpu): New function. 	(powerpc_init_dialect)
 e401b04ca7cd (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and E500MC entries.
 70dc4e324b9a (powerpc_init_dialect): Do not choose a default dialect due to -many/-Many.
 858d7a6db20b (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", "tlbilx"
 bdc7fcfe59f1 (powerpc_macros <extrdi>): Allow n+b of 64
 e0d602ecffb0 (md_show_usage): Document -mpcca2
 b961e85b6ebe (ppc_cpu_t): Typedef to uint64_t
 8765b5569284 (powerpc_opcodes): Remove support for the the "lxsdux", "lxvd2ux"
 634b50f2a623 Rename "ppca2" to "a2"
 9fe54b1ca1c0 (md_show_usage): Document -m476
 0dc9305793c8 Add bfd_mach_ppc_e500mc64
 ce3d2015b21b Define. bfd/ 	* archures.c (bfd_mach_ppc_titan)
 cdc51b0748c4 Add -mpwr4, -mpwr5, -mpwr5x, -mpwr6 and -mpwr7
 63d0fa4e9e57 Add PPC_OPCODE_E500MC for "e500mc64"
 cee62821d472 New Define. ("dccci"): Enable for PPCA2
 85d4ac0b3c0b Correct wclr encoding.
 51b5d4a8c5e5 (powerpc_opcodes): Enable divdeu, devweu, divde, divwe, divdeuo
 e01d869a3be2 (md_assemble): Emit APUinfo section for PPC_OPCODE_E500
 09a8ad8d8f56 (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf and mtocrf on EFS.
 f2bae120dcef (PPC_OPCODE_COMMON): Expand comment.
 81a0b7e2ae09 (PPCPWR2): Add PPC_OPCODE_COMMON. (powerpc_opcodes): Add "subc"
 bdc70b4a03fd (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC)
 7102e95e4943 (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t before inverting
 f383de6633cb (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate on E500 and E500MC
 6b069ee70de3 Remove PPC_OPCODE_PPCPS
 2f7f77101279 (powerpc_opcodes): Enable icswx for POWER7
 989993d80a97 (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX, RBX)
 a08fc94222d1 <drrndq, drrndq., dtstexq, dctqpq, dctqpq., dctfixq, dctfixq.
 8ebac3aae962 (ISA_V2): Define and use for relevant BO field tests
 aea77599d0db Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR
 b240011aba98 (disassemble_init_for_target): Handle ppc init.
 d668828207c2 (powerpc_opcd_indices): Bump array size
 b9c361e0ad33 Add support for PowerPC VLE.
 e1dad58d73dc (has_tls_reloc, has_tls_get_addr_call, has_vle_insns, is_ppc_vle)
 df7b86aa4cb6 Add check that sysdep.h has been included before
 98c76446ea6b (extract_sprg): Use ALLOW8_SPRG to include VLE.
 a4ebc835cbcb (powerpc_macros): Add entries for e_extlwi to e_clrlslwi
 94caa966375d (has_vle_insns, is_ppc_vle): Delete
 c7a8dbf91f37 Change RA to RA0
 d908c8af5a1d Add necessary casts for printing integer values
 03edbe3bfb93 Add/remove PPCVLE for some 32-bit insns
 9f6a6cc022e1 <xnop, yield, mdoio, mdoom>: New extended mnemonics
 588925d06545 <RSQ, RTQ>: Use PPC_OPERAND_GPR
 8baf7b78b5d9 <"lswx">: Use RAX for the second and RBX for the third operand
 e67ed0e885d6 Changed opcode for vabsdub, vabsduh, vabsduw, mviwsplt
 fb048c26f19f (UIMM4, UIMM3, UIMM2, VXVA_MASK, VXVB_MASK, VXVAVB_MASK, VXVDVA_MASK
 382c72e90441 (VXASHB_MASK): New define
 c7a5aa9c64fc (ppc_opts) <altivec>: Use PPC_OPCODE_ALTIVEC2
 ab4437c3224f <vcfpsxws>: Fix opcode spelling
 62082a42b9cd "lfdp" and "stfdp" use DS offset.
 776fc41826bb (ppc_parse_cpu): Update prototype
 943d398f4c52 (insert_sci8, extract_sci8): Rewrite.
 5817ffd1f81c New define (PPC_OPCODE_HTM/POWER8)
 9f0682fe89d9 (extract_vlesi): Properly sign extend
 c0637f3af686 (powerpc_init_dialect): Set default dialect to power8.
 58ae08f29af8 (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu
 4f6ffcd38d90 (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect
 4b95cf5c0c75 Update copyright years
 a47622ac1bad Allow both signed and unsigned fields in PowerPC cmpli insn
 12e87fac5c76 ppc: enable msgclr and msgsnd on Power8
 8514e4db84cc Don't deprecate powerpc mftb insn
 db76a70026ab Power4 should treat mftb as extended mfspr mnemonic
 b90efa5b79ac ChangeLog rotatation and copyright year update
 c4e676f19656 powerpc: Add slbfee. instruction
 27c49e9a8fc0 powerpc: Only initialise opcode indices once
 4fff86c517ab DCBT_EO): New define
 4bc0608a8b69 Fix some PPC assembler errors
 dc302c00611b Add hwsync extended mnemonic
 99a2c5612124 Remove unused MTMSRD_L macro and re-add accidentally deleted comment
 11a0cf2ec0ed Allow for optional operands with non-zero default values
 7b9341139a69 PPC sync instruction accepts invalid and incompatible operands
 ef5a96d564a2 Remove ppc860, ppc750cl, ppc7450 insns from common ppc
 43e65147c07b Remove trailing spaces in opcodes
 6dca4fd141fd Add dscr and ctrl SPR mnemonics
 b6518b387185 Fix compile time warnings generated when compiling with clang
 36f7a9411dcd Patches for illegal ppc 500 instructions
 a680de9a980e Add assembler, disassembler and linker support for power9
 dd2887fc3de4 Reorder some power9 insns
 b817670b52b7 Enable 2 operand form of powerpc mfcr with -many
 6f2750feaf28 Copyright update for binutils
 afa8d4054b8e Delete opcodes that have been removed from ISA 3.0
 1178da445ad5 Accept valid one byte signed and unsigned values for the IMM8 operand
 e43de63c8fd1 Fix powerpc subis range
 514e58b72633 Correct "Fix powerpc subis range"
 19dfcc89e8d9 Add support for new POWER ISA 3.0 instructions
 1fe0971e41a4 add more extern C
 026122a67044 Re-add support for lbarx, lharx, stbcx. and sthcx. insns back to the E6500 cpu
 14b57c7c6a53 PowerPC VLE
 6fd3a02da554 Add support for yet some more new ISA 3.0 instructions
 dfdaec14b0db Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions
 fd486b633e87 Modify POWER9 support to match final ISA 3.0 documentation
 a5721ba270dd Disallow 3-operand cmp[l][i] for ppc64

This updates the disassembly capabilities to add support for newer
processors.
Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
[mpe: Reformat commit list for brevity]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      08d96e0b
    • Balbir Singh's avatar
      powerpc/xmon: Update ppc-dis/opc.c and ppc.h · cc7639ce
      Balbir Singh authored 
      Upgrade ppc-opc.c, ppc-dis.c and ppc.h to the versions belonging to the
following binutils commit:

  65b650b4c7463f4508bed523c24ab0031a5ae5cd
  * ppc-dis.c (print_insn_powerpc): Don't skip all operands after
    setting skip_optional.

That is the last version of those files that were licensed under GPLv2.

This leaves the code in a state that does not compile, because the
binutils code needs to be tweaked to work in the kernel. We don't fix
that in this commit, because we want to import more binutils changes in
subsequent commits. So for now we mark XMON_DISASSEMBLY as BROKEN, so it
can't be built.
Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      cc7639ce
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7