- 27 Mar, 2020 1 commit
-
-
Linus Walleij authored
I renamed the dsi-nodes from dsi@ to dsi-controller@ so that the schema check would kick in, but missed to rename it in a few places. Link: https://lore.kernel.org/r/20200326222536.86441-1-linus.walleij@linaro.orgSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- 26 Mar, 2020 6 commits
-
-
Arnd Bergmann authored
I accidentally merged this after requesting a different solution, reverting now. Link: https://patchwork.kernel.org/patch/11431397/ Fixes: 2cedfe12 ("arm64: dts: specify console via command line") Signed-off-by:
-
Andre Przywara authored
Rob sees little point in maintaining the Calxeda architecture (early ARM 32-bit server) anymore. Since I have a machine sitting under my desk, change the maintainership to not lose support for that platform. Link: https://lore.kernel.org/r/20200228135106.220620-6-andre.przywara@arm.comSigned-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Andre Przywara authored
For proper bindings checks we need to properly group the port-phys and sgpio-gpio items, so that they match the expected number of items. Link: https://lore.kernel.org/r/20200228135106.220620-5-andre.przywara@arm.comSigned-off-by:
-
Andre Przywara authored
Currently multiple interrupts for some devices are written as one array instead of using the DT grouping notation (<0 42 4>, <0 23 4>). This ends up in the same binary representation in the .dtb, but is semantically not equivalent. The yaml schema checks will stumble over this, so lets fix that first. I refrained from using the symbolic names for GIC_SPI/GIC_PPI and IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the original DTS files and the mainline versions, so it's just additional churn. Link: https://lore.kernel.org/r/20200228135106.220620-4-andre.przywara@arm.comSigned-off-by:
-
Andre Przywara authored
The PL011 UART binding requires two clocks to be named in a node. Add the second clock, which is the bus gate, that just gets enabled. Since this is a fixed clock anyway, it doesn't make any difference. Link: https://lore.kernel.org/r/20200228135106.220620-3-andre.przywara@arm.comSigned-off-by:
-
Andre Przywara authored
The .dts files for the Calxeda machines are quite old, so carry some sloppy mistakes that the DT schema checker will complain about. Fix those issues, they should not have any effect on functionality. Link: https://lore.kernel.org/r/20200228135106.220620-2-andre.przywara@arm.comSigned-off-by:
-
- 25 Mar, 2020 33 commits
-
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.7 This adds Bluetooth support on Nexus 5, USB on Xperia Z1 and defines gpio-ranges throughout the various gpio-controllers. * tag 'qcom-dts-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add gpio-ranges property ARM: dts: qcom: msm8974-hammerhead: add support for bluetooth ARM: dts: qcom: msm8974: add blsp2_uart10 ARM: dts: qcom: msm8974-honami: Add USB node. Link: https://lore.kernel.org/r/20200318044305.GE470201@yogaSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_update_for_v5.7_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7, part 2 - Add ptp_ref clock to ethernet nodes for Arria10 * tag 'socfpga_dts_update_for_v5.7_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes Link: https://lore.kernel.org/r/20200325160745.793-1-dinguyen@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.7 (round 2) - G12[ab]: add SPI support, enable on odroid-n2 * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node arm64: dts: meson-g12: add the SPIFC nodes arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width arm64: dts: meson-g12-common: add spicc controller nodes dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs dt-bindings: clk: meson: add the gxl internal dac gate Link: https://lore.kernel.org/r/7hftdyhfq4.fsf@baylibre.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxArnd Bergmann authored
AT91 DT for 5.7 - Enable watchdog on sam9x60 - Correct sama5d4/2 RTC compatibles - Add i2c gpio pinctrl to allow i2c recovery * tag 'at91-5.7-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: at91: sama5d2: add i2c gpio pinctrl ARM: dts: at91: sama5d4: add i2c gpio pinctrl ARM: dts: at91: sama5d3: add i2c gpio pinctrl ARM: dts: at91: sama5d4: use correct rtc compatible ARM: dts: at91: sama5d2: use correct rtc compatible ARM: dts: at91: sam9x60ek: enable watchdog node ARM: dts: at91: sam9x60: add watchdog node ARM: dts: at91: Kill off "simple-panel" compatibles Link: https://lore.kernel.org/r/20200322085931.GA208770@piout.netSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'gemini-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini DTS changes for v5.7: - Rename the IDE nodes to match the YAML schema - Add a temperature zone to the DIR-685, use hard drive as sensor and cool the case using the fan. * tag 'gemini-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes Link: https://lore.kernel.org/r/CACRpkdbvgqCVuoMCHJrCZ0J+3NrwdrBnwBz+BJrSE=hqYh2j+Q@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.6-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt - Rename scpsys nodes to power-controller. - Add PWM node to MT7629 SoC * tag 'v5.6-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: ARM: dts: mediatek: add mt7629 pwm support ARM: dts: mediatek: rename scpsys nodes to power-controller Link: https://lore.kernel.org/r/b454c6b2-656e-2261-7688-f7f2773189cf@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt2712: - add real time clock node mt8173: - mark arch timer invalid in suspend mt8183: - add CPU idle states - add watchdog node - add dynamic power coefficient and cooling cells for all CPUs mt8516: - add basic support for the SoC - add basic support for the pumpkin board * tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: add RTC nodes for MT2712 arm64: dts: mediatek: add pumpkin board dts arm64: dts: mediatek: add dtsi for MT8516 arm64: dts: mt8183: Add #cooling-cells to CPU nodes arm64: dts: mt8183: add/update dynamic power coefficients arm64: dts: mediatek: rename scpsys nodes to power-controller amr64: dts: mt8183: Add watchdog node arm64: dts: mt8173: add arm,no-tick-in-suspend in timer arm64: dts: mt8183: Enable CPU idle-states Link: https://lore.kernel.org/r/c512b5cb-e639-1429-64db-9c1a53378c49@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC family changes for v5.7 - Add missing clocks to dwc3 nodes on am65x (fixes USB) - Add DMA entries for main_spi0 on am65x - Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet support) - Add DMA entries for ADC for both am65x and j721e - Add MCU system control module on j721e (needed by phy-gmii-sel) * tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes Link: https://lore.kernel.org/r/4b6b7804-4bcb-07ba-5e76-6a411e1f457f@ti.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7 - Increase NAND boot partition for Arria10 - Increase QSPI partition for Stratix10 and Agilex * tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: increase the QSPI reg address for Stratix10 and Agilex ARM: dts: socfpga: arria10: Increase boot partition size for NAND Link: https://lore.kernel.org/r/20200318145957.30338-1-dinguyen@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 DTS update for 5.7: - New support for Kontron LS1028A based boards and NXP i.MX8MP EVK. - Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board. - Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board. - Add SNVS clock description to pwrkey device for i.MX8 SoCs. - A number of updates on librem5-devkit board to add audio, proximity sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD devices as well. - A series of patches from Anson Huang to update i.MX8 EVK boards for support of I2C PCA6416, thermal, GPIO LED, OPP table etc. - Add PCIe device nodes for LX2160A and LS1028A SoC. - Add FSPI deivce support for LX2160A evaluation boards. - Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board. - Other small and random updates on LS1028A and i.MX8 support. * tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits) arm64: dts: ls1028a: disable the felix switch by default arm64: dts: imx8mp: Add snvs clock to powerkey arm64: dts: imx8mn: Add snvs clock to powerkey arm64: dts: ls1028a: Add PCIe controller DT nodes arm64: dts: ls1028a: sl28: add support for variant 2 arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS arm64: dts: ls1028a: sl28: fix on-board EEPROMS arm64: dts: freescale: sl28: add SPI flash arm64: dts: imx8m: fix aips dts node arm64: dts: imx8mn: Add CPU thermal zone support arm64: dts: imx8mm: Add thermal zone support arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration arm64: dts: enable fspi in imx8mm dts arm64: dts: imx8mn: align name for crypto child nodes arm64: dts: lx2160aqds: Add FSPI node properties arm64: dts: lx2160ardb: Update FSPI node properties arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support arm64: dts: layerscape: add iommu-map property to pci nodes arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus arm64: dts: imx8mp-evk: Add i2c3 support ... Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxArnd Bergmann authored
i.MX arm DTS changes for 5.7: - New support for i.MX6/7 based PICO devices and Toradex i.MX7 based Aster boards. - Add voltage monitor device node for vf610-zii boards. - Improve UART pins macro defines for i.MX6SX SoC and switch related boards to use the new names. - Use generic node name for devices like GPT, KPP, CCM, WDOG, OCOTP and IOMUXC in i.MX DTS files. - Switch imx6ul-pico device tree to DRM bindings. - Use SPDX-License-Identifier for all Toradex i.MX6/7 based boards. - Add proper rgmii PHY description for imx6dl-riotboard and imx6q-marsboard. - Add capture-subsystem device support for i.MX51. - Kill off "simple-panel" compatibles which has never been an accepted as an upstream compatible string. - Random device addition to various boards. * tag 'imx-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits) ARM: dts: imx6q-marsboard: properly define rgmii PHY ARM: dts: imx6dl-riotboard: properly define rgmii PHY ARM: dts: imx51-zii-rdu1: set name prefix for TPA6130A2 ARM: dts: imx6: RDU2: assign video PLL as input to LDB ARM: dts: vf: toradex: SPDX tags and copyright cleanup ARM: dts: imx7: toradex: use SPDX-License-Identifier ARM: dts: imx6: toradex: use SPDX-License-Identifier ARM: dts: imx51: add capture-subsystem device ARM: dts: imx: add nvmem property for cpu0 ARM: dts: imx6qdl: Add imx6qdl-pico support ARM: dts: imx6ul-pico: Add support for the dwarf baseboard ARM: dts: imx7d-pico: Add support for the nymph baseboard ARM: dts: imx7d-pico: Add support for the dwarf baseboard ARM: dts: imx23: introduce mmc0_sck_cfg ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7 ARM: dts: imx: align name for crypto node and child nodes ARM: dts: imx6qdl-gw5910: add CC1352 UART ARM: dts: imx6qdl-sr-som-ti: indicate powering off wifi is safe ARM: dts: imx6: phycore-som: add da9062 gpio support ARM: dts: imx6: phycore-som: explicit disable pmic watchdog during suspend ... Link: https://lore.kernel.org/r/20200318051918.32579-4-shawnguo@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-bindings-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.7: - Add compatibles for TechNexion i.MX6/7, Kontron LS1028A, Toradex i.MX7, NXP i.MX8MP EVK, and LS1028A evaluation boards. - Improve NXP crypto binding examples to use generic node name. * tag 'imx-bindings-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add TechNexion boards dt-bindings: crypto: caam: use generic node name dt-bindings: crypto: dcp: use generic node name dt-bindings: crypto: sahara: use generic node name dt-bindings: arm: fsl: add nxp based toradex colibri-imx7 bindings dt-bindings: arm: imx: Add the i.MX8MP EVK board dt-bindings: arm: fsl: add Kontron sl28 boards dt-bindings: arm: fsl: add LS1028A based boards Link: https://lore.kernel.org/r/20200318051918.32579-3-shawnguo@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'uniphier-dt64-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.7 - Rename nodes to avoid dt-schema warnings - Enable SPI for PXs3 reference board - Enable thermal monitor for PXs3 SoC - Fix clock and reset of SPI nodes * tag 'uniphier-dt64-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: Set SCSSI clock and reset IDs for each channel arm64: dts: uniphier: Add nodes of thermal monitor and thermal zone for PXs3 arm64: dts: uniphier: Enable spi node for PXs3 reference board arm64: dts: uniphier: rename NAND node names to follow json-schema arm64: dts: uniphier: rename aidet node names to follow json-schema arm64: dts: uniphier: change SD/eMMC node names to follow json-schema Link: https://lore.kernel.org/r/CAK7LNASMD-zqNfG02WhU1LeAJevnjBv=oT2N_7y6C8w7kryotQ@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'uniphier-dt-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM SoC DT updates for v5.7 - Rename nodes to avoid dt-schema warnings - Add a generic compatible to EEPROM so that it matches OF table - Add USB controller nodes to Pro5 SoC - Fix clock and reset of SPI nodes * tag 'uniphier-dt-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: Set SCSSI clock and reset IDs for each channel ARM: dts: uniphier: Add USB3 controller nodes for Pro5 ARM: dts: uniphier: Add one more generic compatible string for I2C EEPROM ARM: dts: uniphier: rename cache controller nodes to follow json-schema ARM: dts: uniphier: rename NAND node names to follow json-schema ARM: dts: uniphier: rename aidet node names to follow json-schema ARM: dts: uniphier: change SD/eMMC node names to follow json-schema Link: https://lore.kernel.org/r/CAK7LNAQ-AOTyqpV1E_S-hksjqexHfVauwGV9rrfDvjRVnu8-UQ@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.7 - sound, bluetooth, thermal updates - A1: add secure power domain nodes - misc. cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add thermal zones to meson gx devices arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi arm64: dts: meson-g12b: fix N2/VIM3 audio card model names arm64: dts: meson-gxbb-vega-s95: fix bluetooth node arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson: sei510: fix sound card codec node arm64: dts: meson: s400: fix sound card codec nodes arm64: dts: meson: add pdm reset line arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller arm64: dts: amlogic: add rc-videostrong-kii-pro keymap arm64: dts: meson: a1: add secure power domain controller Link: https://lore.kernel.org/r/7hlfo0ugnj.fsf@baylibre.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Support for the rk3399-based Pinebook Pro, eDP support and power-tree for the rk3399 evaluation board, a big number of fixes for issues found by checking against the new yaml dt-bindings. And on the smaller side, fixes for network transfers, the mute gpio on rk3328 gets actually described and one lvds fix on the px30 and the rk3399-hugsun board gets IR and power led. * tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits) arm64: dts: rockchip: Add Hugsun X99 power led arm64: dts: rockchip: Add Hugsun X99 IR receiver arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator arm64: dts: add bus to rockchip amba nodenames arm64: dts: rockchip: replace clock-freq-min-max by max-frequency arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30 arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99 arm64: dts: rockchip: fix compatible property for rk3399-evb arm64: dts: rockchip: Add initial support for Pinebook Pro dt-bindings: Add doc for Pine64 Pinebook Pro arm64: dts: rockchip: Enable eDP display on rk3399 evb arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb arm64: dts: rockchip: Add pmic dt tree for rk3399 evb arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb arm64: dts: rockchip: fix px30 lvds ports arm64: dts: rockchip: Add txpbl node for RK3399/RK3328 ... Link: https://lore.kernel.org/r/27799037.pT45f1LVdF@philSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Improvements for the rk3288-vyasa board and a lot of cleanups from verifying devicetrees against new yaml bindings. * tag 'v5.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits) ARM: dts: rockchip: remove #address-cells and #size-cells from i2s nodes ARM: dts: rockchip: swap clocks and clock-names values for i2s nodes ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodes ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes ARM: dts: rockchip: swap clocks and clock-names values for spdif nodes ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot ARM: dts: rockchip: remove clock-frequency from saradc node rv1108 ARM: dts: rockchip: fix vref-supply for &saradc node rk3288 firefly reload ARM: dts: rockchip: use DMA channels for UARTs for RK3288 ARM: dts: rockchip: rk3xxx: fix L2 cache-controller nodename ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc ARM: dts: add bus to rockchip amba nodenames ARM: dts: rockchip: remove #dma-cells from dma client nodes for rv1108 ARM: dts: rockchip: fix rockchip,default-sample-phase property names ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc dt-bindings: arm: add Rockchip rk3036-evb board dt-bindings: arm: fix Rockchip Kylin board bindings ARM: dts: rockchip: add missing model properties ARM: dts: rockchip: Add vcc50_hdmi for rk3288-vyasa ARM: dts: rockchip: Fix ddc-i2c-bus for rk3288-vyasa ... Link: https://lore.kernel.org/r/7846023.TtVhTo4ACP@philSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Samsung DTS ARM changes for v5.7 1. Various fixes: - Reboot of some Odroid Exynos4412-based boards, - MMC regulators on Arndale5250, - Memory mapping on Artik5, - GPU power domain on Exynos542x boards, - LCD SPI polarity on UniversalC210, 2. Add thermal cooling of GPU on Odroid XU3/XU4 family, 3. Add dynamic-power-coefficient to Exynos5422 for energy model. * tag 'samsung-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix polarity of the LCD SPI bus on UniversalC210 board ARM: dts: exynos: Fix G3D power domain supply on Arndale Octa boards ARM: dts: exynos: Fix G3D power domain supply on Odroid XU3/XU4/HC1 boards ARM: dts: exynos: Fix memory on Artik5 evaluation boards ARM: dts: exynos: Make fixed regulators always-on on Arndale5250 ARM: dts: exynos: Fix MMC regulator on Arndale5250 board ARM: dts: exynos: Add dynamic-power-coefficient to Exynos5422 CPUs ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1 ARM: dts: exynos: Fix broken reboot on some Odroid U2/X2/U3 boards Link: https://lore.kernel.org/r/20200316175652.5604-3-krzk@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS updates for the v5.7 kernel: - Fix some DSI nodes - Add GT-S7710 DTS file * tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Add devicetree for Samsung GT-S7710 ARM: dts: ux500: Fix up DSI controller nodes Link: https://lore.kernel.org/r/CACRpkdb8T9CZYvYEFYnQTOMoXGsn43N8TgKfvoJZjTwRHW6zhQ@mail.gmail.comSigned-off-by:
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
mvebu dt64 for 5.7 (part 1) Improve network support on two Armada 8040 based board: Clearfog GT 8 and Macchiatobin. Add ethernet alias on Espressobin for U-Boot support. Fix various dt compilation issue or warning. * tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: Fix cpu compatible for AP807-quad arm64: dts: marvell: fix non-existed cpu referrence in armada-ap806-dual.dtsi arm64: dts: marvell: build ESPRESSObin variants arm64: dts: marvell: espressobin: indicate dts version arm64: dts: marvell: espressobin: add ethernet alias arm64: dts: mcbin: support 2W SFP modules arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay Link: https://lore.kernel.org/r/87h7yqx7w2.fsf@FE-laptopSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.7-rc1 These changes add support for the XUSB pad controller, as well as the XUSB controller on Tegra194. Furthermore, USB device mode is supported across Tegra210 and Tegra186 boards. PCIe endpoint mode support is added for the Jetson AGX Xavier platform. Various minor fixes eliminate warnings on boot related to missing power supplies for some devices. * tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add support for PCIe endpoint mode in P2972-0000 platform arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194 arm64: tegra: Add ethernet alias on Jetson TX1 arm64: tegra: Populate LP8557 backlight regulator arm64: tegra: Fix Tegra186 SOR supply arm64: tegra: Add EEPROM supplies arm64: tegra: Enable I2C controller for EEPROM arm64: tegra: smaug: Change clk_out_2 provider to PMC arm64: tegra: Add clock-cells property to Tegra PMC node arm64: tegra: Enable XUDC node on Jetson Nano arm64: tegra: Update OTG port entries for Jetson Nano arm64: tegra: Enable XUDC node on Jetson TX2 arm64: tegra: Add XUDC node for Tegra186 arm64: tegra: Enable XUDC on Jetson TX1 arm64: tegra: Add XUDC node for Tegra210 arm64: tegra: Update OTG port entries for Jetson TX2 arm64: tegra: Update OTG port entries for Jetson TX1 arm64: tegra: Enable XUSB host in P2972-0000 board arm64: tegra: Add XUSB and pad controller on Tegra194 arm64: tegra: Fix Tegra194 PCIe compatible string Link: https://lore.kernel.org/r/20200313165848.2915133-8-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.7-rc1 Minor fixes and additions for 32-bit Tegra SoC device trees. * tag 'tegra-for-5.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Update sound node clocks in device tree ARM: tegra: Add clock-cells property to PMC ARM: tegra: Remove USB 2-0 port from Jetson TK1 padctl Link: https://lore.kernel.org/r/20200313165848.2915133-6-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.7-rc1 New IDs are added for clocks that are controlled by the PMC. This replaces older IDs that were erroneously provided by the clock and reset controller. This also adds device tree bindings for XUSB pad controller support on Tegra194 as well as USB role switching on NVIDIA Tegra SoCs. * tag 'tegra-for-5.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding dt-bindings: phy: tegra-xusb: Add usb-role-switch dt-bindings: phy: tegra: Add Tegra194 support dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings dt-bindings: tegra: Convert Tegra PMC bindings to YAML dt-bindings: clock: tegra: Add IDs for OSC clocks Link: https://lore.kernel.org/r/20200313165848.2915133-1-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.3, round 1 Highlights: ---------- - Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. It is based on stm32mp157c SoC. - Add OTG full support on stm32mp15. - Fix issues seen during yaml validation on stpmic and stmfx. - Add i2c power/wakeup support on stm32mp15. - Add card detect on sdcard on stm32mp boards * tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits) ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board ARM: dts: stm32: Correct stmfx node name on stm32746g-eval board ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 ARM: dts: stm32: add USB OTG full support on stm32mp151 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board ... Link: https://lore.kernel.org/r/ded09d01-df47-9572-4679-34669bff8916@st.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-dt-bindings-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.7 - Document support for the M3ULCB board with R-Car M3-W+. * tag 'renesas-dt-bindings-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: arm: renesas: Add M3ULCB with R-Car M3-W+ Link: https://lore.kernel.org/r/20200313154304.1636-4-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 (take two) - Thermal support for R-Car M3-W+, - Support for the M3ULCB board with R-Car M3-W+, - CPUIdle support for R-Car M3-N and E3, - Display support for the HiHope RZ/G2M board, - A minor fix. * tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+ arm64: dts: renesas: r8a77961: Add thermal nodes Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 (take two) - LCD/touchscreen support for the iwg22d-sodimm board. * tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg22d-sodimm: Enable touchscreen ARM: dts: iwg22d-sodimm: Enable LCD panel Link: https://lore.kernel.org/r/20200313154304.1636-2-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner Device Tree Changes for v5.7 A fairly large set of changes for v5.7, including some new devices. SoC specific changes: - SPI on H6 SoC enabled - Thermal sensor on R40 SoC enabled - Deinterlace core hardware on A64 SoC enabled - Redundant assigned-clocks properties removed - required clock rates are now enforced by drivers - LVDS panel support on A20 SoC enabled - PMU compatible fixed for H5 and H6 SoCs - Thermal trip points added for A83T and H5 SoCs - (Image) Rotation core hardware on A83T and A64 SoCs enabled Device specific changes: - Pine64 PineTab and PinePhone added - Various cleanups and improvements for Pine64 PineBook - GPIO pin bank regulator supplies added for A64-OlinXino - eMMC enabled on Orange Pi 3 - PocketBook Touch Lux 3 added - Linutronix Testbox v2 added - Ethernet enabled on Orange Pi One Plus - HDMI enabled on H6-based Orange Pi boards * tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits) arm64: dts: allwinner: a64: add node for rotation core ARM: dts: sun8i: a83t: Add device node for rotation core arm64: dts: allwinner: a64: Fix display clock register range ARM: dts: sunxi: Fix DE2 clocks register range arm64: dts: allwinner: h6: orangepi: Enable HDMI arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet arm64: dts: allwinner: h6: Move ext. oscillator to board DTs arm64: dts: allwinner: Add initial support for Pine64 PinePhone dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings arm64: dts: sun50i-a64: Add i2c2 pins ARM: dts: sunxi: h3/h5: add r_pwm node arm64: allwinner: a64: enable LCD-related hardware for Pinebook ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps ARM: dts: sun8i-h3: Add thermal trip points/cooling maps arm64: dts: allwinner: h6: Fix PMU compatible arm64: dts: allwinner: h5: Fix PMU compatible ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator ARM: dts: sun5i: Add PocketBook Touch Lux 3 support dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3 ... Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.orgSigned-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.7, please pull the following: - Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS - Nicolas moves the eMMC2 controller into its separate node in order for platform firmware to perform the necessary "dma-ranges" property patching based on the chip revision since the eMMC controller has different addressing constraints. - Florian convers a whole bunch of Broadcom boards bindings from text to YAML. * tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux: dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg' dt-bindings: arm: bcm: Convert Vulcan to YAML dt-bindings: arm: bcm: Convert BCM11351 to YAML dt-bindings: arm: bcm: Convert BCM4708 to YAML dt-bindings: arm: bcm: Convert BCM23550 to YAML dt-bindings: arm: bcm: Convert BCM21664 to YAML dt-bindings: arm: bcm: Convert Stingray to YAML dt-bindings: arm: bcm: Convert Northstar 2 to YAML dt-bindings: arm: bcm: Convert Northstar Plus to YAML dt-bindings: arm: bcm: Convert Hurricane 2 to YAML dt-bindings: arm: bcm: Convert Cygnus to YAML ARM: dts: bcm2711: Move emmc2 into its own bus ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels Link: https://lore.kernel.org/r/20200311212012.9418-2-f.fainelli@gmail.comSigned-off-by:
-
Chunyan Zhang authored
The SPRD serial driver need to know which serial port would be used as console in an early period during initialization, otherwise console init would fail since we added this feature[1]. So this patch add console to command line via devicetree. [1] https://lore.kernel.org/lkml/20190826072929.7696-4-zhang.lyra@gmail.com/ Link: https://lore.kernel.org/r/20200311112120.30890-1-zhang.lyra@gmail.comSigned-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.7 merge window Few device tree changes for omaps for v5.7 to configure omap5 AESS module and to add idle_states for am335x and am437x cpuidle. * tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Add idle_states for cpuidle ARM: dts: am33xx: Add idle_states for cpuidle ARM: dts: Configure omap5 AESS Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-4Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.7 series take one: - Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. * tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/arm64: dts: Rename SMB bus to just bus dt-bindings: arm: Drop the non-YAML bindings dt-bindings: arm: Add Versatile Express and Juno YAML schema dt-bindings: arm: Add RealView YAML schema dt-bindings: arm: Add Versatile YAML schema dt-bindings: arm: Add Integrator YAML schema ARM: dts: RealView: Fix the name of the SoC node ARM: dts: Versatile: Use syscon as node name for IB2 ARM: dts: integratorap: Remove top level dma-ranges Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.7 - CryptoCell support for R-Car M3-W, M3-W+, M3-N, E3, and D3, - Miscellaneous fixes and improvements. * tag 'renesas-arm64-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg2: Add reset control properties for display arm64: dts: renesas: rcar-gen3: Add reset control properties for display arm64: dts: renesas: Remove use of ARCH_R8A7795 arm64: dts: renesas: rcar-gen3: Add CCREE nodes arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps" arm: dts: renesas: r8a77980: Remove r8a77970 DU compatible Link: https://lore.kernel.org/r/20200226110221.19288-5-geert+renesas@glider.beSigned-off-by:
-
