As the iterator will be reading a live buffer, and if the event being read
is on a page that a writer crosses, it will fail and try again, the
condition in rb_iter_peek() that only allows a retry to happen three times
is no longer valid. Allow rb_iter_peek() to retry more than three times
without killing the ring buffer, but only if rb_iter_head_event() had failed
at least once.

Link: http://lkml.kernel.org/r/20200317213416.452888193@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Have the ring_buffer_iter structure have a place to store an event, such
that it can not be overwritten by a writer, and load it in such a way via
rb_iter_head_event() that it will return NULL and reset the iter to the
start of the current page if a writer updated the page.

Link: http://lkml.kernel.org/r/20200317213416.306959216@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Have the ring_buffer_iter structure contain a page_stamp, such that it can
be used to see if the writer entered the page the iterator is on. When going
to a new page, the iterator will record the time stamp of that page. When
reading events, it can copy the event to an internal buffer on the iterator
(to be implemented later), then check the page's time stamp with its own to
see if the writer entered the page. If so, it will need to try to read the
event again.

Link: http://lkml.kernel.org/r/20200317213416.163549674@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

When the ring buffer was first created, the iterator followed the normal
producer/consumer operations where it had both a peek() operation, that just
returned the event at the current location, and a read(), that would return
the event at the current location and also increment the iterator such that
the next peek() or read() will return the next event.

The only use of the ring_buffer_read() is currently to move the iterator to
the next location and nothing now actually reads the event it returns.
Rename this function to its actual use case to ring_buffer_iter_advance(),
which also adds the "iter" part to the name, which is more meaningful. As
the timestamp returned by ring_buffer_read() was never used, there's no
reason that this new version should bother having returning it. It will also
become a void function.

Link: http://lkml.kernel.org/r/20200317213416.018928618@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

It was complained about that when the trace file is read, that the tracing
is disabled, as the iterator expects writing to the buffer it reads is not
updated. Several steps are needed to make the iterator handle a writer,
by testing if things have changed as it reads.

This step is to make ring_buffer_empty() expect the buffer to be changing.
Note if the current location of the iterator is overwritten, then it will
return false as new data is being added. Note, that this means that data
will be skipped.

Link: http://lkml.kernel.org/r/20200317213415.870741809@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In order to have the iterator read the buffer even when it's still updating,
it requires that the ring buffer iterator saves each event in a separate
location outside the ring buffer such that its use is immutable.

There's one use case that saves off the event returned from the ring buffer
interator and calls it again to look at the next event, before going back to
use the first event. As the ring buffer iterator will only have a single
copy, this use case will no longer be supported.

Instead, have the one use case create its own buffer to store the first
event when looking at the next event. This way, when looking at the first
event again, it wont be corrupted by the second read.

Link: http://lkml.kernel.org/r/20200317213415.722539921@goodmis.orgSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The ftrace selftest "ftrace - test for function traceon/off triggers"
enables all events and reads the trace file. Now that the trace file does
not disable tracing, and will attempt to continually read new data that is
added, the selftest gets stuck reading the trace file. This is because the
data added to the trace file will fill up quicker than the reading of it.

By only enabling scheduling events, the read can keep up with the writes.
Instead of enabling all events, only enable the scheduler events.

Link: http://lkml.kernel.org/r/20200318111345.0516642e@gandalf.local.home

Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Clang warns:

../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
        if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
                                       ^
1 warning generated.

These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).

Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com

Link: https://github.com/ClangBuiltLinux/linux/issues/893Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This change adds the below gpu memory tracepoint:
gpu_mem/gpu_mem_total: track global or proc gpu memory total usages

Per process tracking of total gpu memory usage in the gem layer is not
appropriate and hard to implement with trivial overhead. So for the gfx
device driver layer to track total gpu memory usage both globally and
per process in an easy and uniform way is to integrate the tracepoint in
this patch to the underlying varied implementations of gpu memory
tracking system from vendors.

Putting this tracepoint in the common trace events can not only help
wean the gfx drivers off of debugfs but also greatly help the downstream
Android gpu vendors because debugfs is to be deprecated in the upcoming
Android release. Then the gpu memory tracking of both Android kernel and
the upstream linux kernel can stay closely, which can benefit the whole
kernel eco-system in the long term.

Link: http://lkml.kernel.org/r/20200302235044.59163-1-zzyiwei@google.comAcked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yiwei Zhang <zzyiwei@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Show line and column when we got a parse error in bootconfig tool.
Current lib/bootconfig shows the parse error with byte offset, but
that is not human readable.
This makes xbc_init() not showing error message itself but able to
pass the error message and position to caller, so that the caller
can decode it and show the error message with line number and columns.

With this patch, bootconfig tool shows an error with line:column as
below.

  $ cat samples/bad-dotword.bconf
  # do not start keyword with .
  key {
    .word = 1
  }
  $ ./bootconfig -a samples/bad-dotword.bconf initrd
  Parse Error: Invalid keyword at 3:3

Link: http://lkml.kernel.org/r/158323469002.10560.4023923847704522760.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Support O=<builddir> option to build bootconfig tool in
the other directory. As same as other tools, if you specify
O=<builddir>, bootconfig command is build under <builddir>.

Link: http://lkml.kernel.org/r/158323468033.10560.14661631369326294355.stgit@devnote2Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Commit 567cd4da ("ring-buffer: User context bit recursion checking")
added the TRACE_BUFFER bits to be used in the current task's trace_recursion
field. But the final submission of the logic removed the use of those bits,
but never removed the bits themselves (they were never used in upstream
Linux). These can be safely removed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The hwlat tracer runs a loop of width time during a given window. It then
reports the max latency over a given threshold and records a timestamp. But
this timestamp is the time after the width has finished, and not the time it
actually triggered.

Record the actual time when the latency was greater than the threshold as
well as the number of times it was greater in a given width per window.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull ext4 fixes from Ted Ts'o:
 "Two more bug fixes (including a regression) for 5.6"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
  jbd2: fix data races at struct journal_head

Pull KVM fixes from Paolo Bonzini:
 "More bugfixes, including a few remaining "make W=1" issues such as too
  large frame sizes on some configurations.

  On the ARM side, the compiler was messing up shadow stacks between EL1
  and EL2 code, which is easily fixed with __always_inline"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: check descriptor table exits on instruction emulation
  kvm: x86: Limit the number of "kvm: disabled by bios" messages
  KVM: x86: avoid useless copy of cpufreq policy
  KVM: allow disabling -Werror
  KVM: x86: allow compiling as non-module with W=1
  KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
  KVM: Introduce pv check helpers
  KVM: let declaration of kvm_get_running_vcpus match implementation
  KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
  arm64: Ask the compiler to __always_inline functions used by KVM at HYP
  KVM: arm64: Define our own swab32() to avoid a uapi static inline
  KVM: arm64: Ask the compiler to __always_inline functions used at HYP
  kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
  KVM: arm/arm64: Fix up includes for trace.h

KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.

Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.

Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull i2c fixes from Wolfram Sang:
 "I2C has three driver bugfixes for you. We agreed on the Mac regression
  to go in via I2C"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  macintosh: therm_windtunnel: fix regression when instantiating devices
  i2c: altera: Fix potential integer overflow
  i2c: jz4780: silence log flood on txabrt

If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+

journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  Three are in drivers for fairly obvious bugs. The fourth is a set of
  regressions introduced by the compat_ioctl changes because some of the
  compat updates wrongly replaced .ioctl instead of .compat_ioctl"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
  scsi: zfcp: fix wrong data and display format of SFP+ temperature
  scsi: sd_sbc: Fix sd_zbc_report_zones()
  scsi: libfc: free response frame from GPN_ID

Pull PCI fixes from Bjorn Helgaas:

 - Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski)

 - Update MAINTAINERS for recent Cadence driver file move (Lukas
   Bulwahn)

* tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Correct Cadence PCI driver path
  PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers

Pull block fixes from Jens Axboe:

 - Passthrough insertion fix (Ming)

 - Kill off some unused arguments (John)

 - blktrace RCU fix (Jan)

 - Dead fields removal for null_blk (Dongli)

 - NVMe polled IO fix (Bijan)

* tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  nvme-pci: Hold cq_poll_lock while completing CQEs
  blk-mq: Remove some unused function arguments
  null_blk: remove unused fields in 'nullb_cmd'
  blktrace: Protect q->blk_trace with RCU
  blk-mq: insert passthrough request into hctx->dispatch directly

Pull io_uring fixes from Jens Axboe:

 - Fix for a race with IOPOLL used with SQPOLL (Xiaoguang)

 - Only show ->fdinfo if procfs is enabled (Tobias)

 - Fix for a chain with multiple personalities in the SQEs

 - Fix for a missing free of personality idr on exit

 - Removal of the spin-for-work optimization

 - Fix for next work lookup on request completion

 - Fix for non-vec read/write result progation in case of links

 - Fix for a fileset references on switch

 - Fix for a recvmsg/sendmsg 32-bit compatability mode

* tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  io_uring: fix 32-bit compatability with sendmsg/recvmsg
  io_uring: define and set show_fdinfo only if procfs is enabled
  io_uring: drop file set ref put/get on switch
  io_uring: import_single_range() returns 0/-ERROR
  io_uring: pick up link work on submit reference drop
  io-wq: ensure work->task_pid is cleared on init
  io-wq: remove spin-for-work optimization
  io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL
  io_uring: fix personality idr leak
  io_uring: handle multiple personalities in link chains

Pull NVMe fix from Keith.

* 'nvme-5.6-rc4' of git://git.infradead.org/nvme:
  nvme-pci: Hold cq_poll_lock while completing CQEs

Pull ACPI fixes from Rafael Wysocki:
 "Fix a couple of configuration issues in the ACPI watchdog (WDAT)
  driver (Mika Westerberg) and make it possible to disable that driver
  at boot time in case it still does not work as expected (Jean
  Delvare)"

* tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: watchdog: Set default timeout in probe
  ACPI: watchdog: Fix gas->access_width usage
  ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
  ACPI: watchdog: Allow disabling WDAT at boot

Pull power management fixes from Rafael Wysocki:
 "Fix a recent cpufreq initialization regression (Rafael Wysocki),
  revert a devfreq commit that made incompatible changes and broke user
  land on some systems (Orson Zhai), drop a stale reference to a
  document that has gone away recently (Jonathan Neuschäfer), and fix a
  typo in a hibernation code comment (Alexandre Belloni)"

* tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Fix policy initialization for internal governor drivers
  Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
  PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
  Documentation: power: Drop reference to interface.rst

Pull zonefs fixes from Damien Le Moal:
 "Two fixes in here:

   - Revert the initial decision to silently ignore IOCB_NOWAIT for
     asynchronous direct IOs to sequential zone files. Instead, return
     an error to the user to signal that the feature is not supported
     (from Christoph)

   - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures
     if no other file system already selected this option (from
     Johannes)"

* tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: select FS_IOMAP
  zonefs: fix IOCB_NOWAIT handling

Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.6, take #1

- Fix compilation on 32bit
- Move  VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline

In older version of systemd(219), at boot time, udevadm is called with :
	/usr/bin/udevadm trigger --type=devices --action=add"

This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent,
leading to the "kvm: disabled by bios" message in case of your Bios disabled
the virtualization extensions.

On a modern system running up to 256 CPU threads, this pollutes the Kernel logs.

This patch offers to ratelimit this message to avoid any userspace program triggering
this uevent printing this message too often.

This patch is only a workaround but greatly reduce the pollution without
breaking the current behavior of printing a message if some try to instantiate
KVM on a system that doesn't support it.

Note that recent versions of systemd (>239) do not have trigger this behavior.

This patch will be useful at least for some using older systemd with recent Kernels.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

* pm-sleep:
  PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
  Documentation: power: Drop reference to interface.rst

* pm-devfreq:
  Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"

struct cpufreq_policy is quite big and it is not a good idea
to allocate one on the stack.  Just use cpufreq_cpu_get and
cpufreq_cpu_put which is even simpler.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Restrict -Werror to well-tested configurations and allow disabling it
via Kconfig.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Compile error with CONFIG_KVM_INTEL=y and W=1:

  CC      arch/x86/kvm/vmx/vmx.o
arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=]
   68 | static const struct x86_cpu_id vmx_cpu_id[] = {
      |                                ^~~~~~~~~~
cc1: all warnings being treated as errors

When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a
reference to the structure (or any code at all).  This makes W=1 compiles
unhappy.

Wrap both in a #ifdef to avoid the issue.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
[Do the same for CONFIG_KVM_AMD. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Nick Desaulniers Reported:

  When building with:
  $ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000
  The following warning is observed:
  arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in
  function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=]
  static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int
  vector)
              ^
  Debugging with:
  https://github.com/ClangBuiltLinux/frame-larger-than
  via:
  $ python3 frame_larger_than.py arch/x86/kernel/kvm.o \
    kvm_send_ipi_mask_allbutself
  points to the stack allocated `struct cpumask newmask` in
  `kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is
  potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for
  the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as
  8192, making a single instance of a `struct cpumask` 1024 B.

This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for
both pv tlb and pv ipis..
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Introduce some pv check helpers for consistency.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Sparse notices that declaration and implementation do not match:
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: warning: incorrect type in return expression (different address spaces)
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17:    expected struct kvm_vcpu [noderef] <asn:3> **
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17:    got struct kvm_vcpu *[noderef] <asn:3> *
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Even if APICv is disabled at startup, the backing page and ir_list need
to be initialized in case they are needed later.  The only case in
which this can be skipped is for userspace irqchip, and that must be
done because avic_init_backing_page dereferences vcpu->arch.apic
(which is NULL for userspace irqchip).

Tested-by: rmuncrief@humanavance.com
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull drm fixes from Dave Airlie:
 "Just some fixes for this week: amdgpu, radeon and i915.

  The main i915 one is a regression Gen7 (Ivybridge/Haswell), this moves
  them back from trying to use the full-ppgtt support to the aliasing
  version it used to use due to gpu hangs. Otherwise it's pretty quiet.

  amdgpu:
   - Drop DRIVER_USE_AGP
   - Fix memory leak in GPU reset
   - Resume fix for raven

  radeon:
   - Drop DRIVER_USE_AGP

  i915:
   - downgrade gen7 back to aliasing-ppgtt to avoid GPU hangs
   - shrinker fix
   - pmu leak and double free fixes
   - gvt user after free and virtual display reset fixes
   - randconfig build fix"

* tag 'drm-fixes-2020-02-28' of git://anongit.freedesktop.org/drm/drm:
  drm/radeon: Inline drm_get_pci_dev
  drm/amdgpu: Drop DRIVER_USE_AGP
  drm/i915: Avoid recursing onto active vma from the shrinker
  drm/i915/pmu: Avoid using globals for PMU events
  drm/i915/pmu: Avoid using globals for CPU hotplug state
  drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt
  drm/i915: fix header test with GCOV
  amdgpu/gmc_v9: save/restore sdpif regs during S3
  drm/amdgpu: fix memory leak during TDR test(v2)
  drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetime
  drm/i915/gvt: Separate display reset from ALL_ENGINES reset