- 30 Jan, 2019 2 commits
-
-
Jérome Perrin authored
- don't install pycodestyle (just because it complains when indenting with 2 spaces) - add mypy and typeshed (not used, but makes sense to also have) - add isort (not used, but makes sense to also have) - update pyls and other packages for latest fixes. Get pyls from git to get fixes for yapf config lookup
-
Jérome Perrin authored
-
- 24 Jan, 2019 1 commit
-
-
Alain Takoudjou authored
If qemu use physical disk device instead of created qemu image disk, we skip this promise. /reviewed-on nexedi/slapos!507
-
- 23 Jan, 2019 1 commit
-
-
Alain Takoudjou authored
-
- 22 Jan, 2019 9 commits
-
-
Kirill Smelkov authored
While helping @romain to review my current work we tried to build helloworld and found that it is completely broken. It was first minimally fixed to pin eggs and the like. Then I've added Go1.11 to our stack, so that recent-enough compiler/stdlib could be used. A note goes here that currently our lab uses go1.9 which is outdated and not supported by upstream, and other bits are still using go1.10.3 while go1.10.7 was already released some time ago with bug and security fixes. I did not touched neither go1.10 / nor go1.9, but imho it makes sense for infrastructure people to look into appropriate upgrades. Finally component/helloweb/ is switched to use gowork infrastructure (see 1b540151 for gowork introduction). Today gowork is used to build eveything go-related, so building go bits manually via cmmi as example is a bit misleading. Gowork is also required in case we'll need to use any third-party or our package a helloweb-go. /cc @luke, @alain.takoudjou /reviewed-by @jerome, @tomo /reviewed-on nexedi/slapos!505
-
Jérome Perrin authored
-
Jérome Perrin authored
-
Kirill Smelkov authored
- it is gowork that is now used by Go-related bits in SlapOS, so using gowork is preferred as example. Besides we need gowork to be able to use any third-party Go package. - other languages can use helloweb repository from under gowork/ tree as well. The hash of helloweb.git is changed, becuase its layout had to be too adjusted to match gowork mode: nexedi/helloweb@a072af78...8bfedac6
-
Kirill Smelkov authored
To pick up Python3 support. helloweb@39fd89a3...a072af78
-
Kirill Smelkov authored
Don't drop support for Go1.9, as, even though Go1.9 is no longer supported, software/gitlab depends on it. Our Go1.10.X is also too outdated, but I'm not touching it here neither. /cc @alain.takoudjou, @luke
-
Kirill Smelkov authored
2019-01-21 17:56:18 slapos[13553] INFO While: 2019-01-21 17:56:18 slapos[13553] INFO Installing. 2019-01-21 17:56:18 slapos[13553] INFO Getting section instance-profile. 2019-01-21 17:56:18 slapos[13553] INFO Initializing section instance-profile. 2019-01-21 17:56:18 slapos[13553] INFO Installing recipe slapos.recipe.template. 2019-01-21 17:56:18 slapos[13553] INFO Getting distribution for 'slapos.recipe.template'. 2019-01-21 17:56:18 slapos[13553] INFO Error: Picked: slapos.recipe.template = 4.3 2019-01-21 17:56:19 slapos[13553] ERROR Failed to run buildout profile in directory '/srv/slapgrid/slappart7/srv/runner/software/19771f7b751ffc2a88162b15750c6069' 2019-01-21 18:01:21 slapos[26771] INFO While: 2019-01-21 18:01:21 slapos[26771] INFO Installing. 2019-01-21 18:01:21 slapos[26771] INFO Getting section helloweb-ruby. 2019-01-21 18:01:21 slapos[26771] INFO Initializing section helloweb-ruby. 2019-01-21 18:01:21 slapos[26771] INFO Getting option helloweb-ruby:input. 2019-01-21 18:01:21 slapos[26771] INFO Getting section helloweb-ruby-bundle. 2019-01-21 18:01:21 slapos[26771] INFO Initializing section helloweb-ruby-bundle. 2019-01-21 18:01:21 slapos[26771] INFO Getting option helloweb-ruby-bundle:make-targets. 2019-01-21 18:01:21 slapos[26771] INFO Getting section bundler. 2019-01-21 18:01:21 slapos[26771] INFO Initializing section bundler. 2019-01-21 18:01:21 slapos[26771] INFO Installing recipe rubygemsrecipe. 2019-01-21 18:01:21 slapos[26771] INFO Getting distribution for 'rubygemsrecipe'. 2019-01-21 18:01:21 slapos[26771] INFO Error: Picked: rubygemsrecipe = 0.2.2+slapos001 Ruby stuff was failing to download at all -> let's use the versions that are the same as currently used in software/gitlab. Based on patch by @romain. Helped by @jerome.
-
Jérome Perrin authored
openss1.1 caused problems with bundler: Unable to require openssl, install OpenSSL and rebuild ruby (preferred) or use non-HTTPS sources
-
Jérome Perrin authored
/reviewed-on nexedi/slapos!504
-
- 21 Jan, 2019 1 commit
-
-
Thomas Gambier authored
They are dependencies of slapos.toolbox and we already agreed to put slapos.toolbox version in a shared file. /cc @jerome @jm /reviewed-on nexedi/slapos!502
-
- 18 Jan, 2019 1 commit
-
-
Alain Takoudjou authored
-
- 17 Jan, 2019 1 commit
-
-
Łukasz Nowak authored
One of solutions for random 502 errors from caddy is to fully disable HTTP2 protocol ( https://github.com/mholt/caddy/issues/1080 ) We run Caddy with HTTP2 enabled by default, as we can enable/disable it per each slave, but in some environments it might be just better to fully avoid HTTP2 codepaths in Caddy. /reviewed-on !495
-
- 16 Jan, 2019 4 commits
-
-
Łukasz Nowak authored
The IP used by frontend can be different than the real endpoint, and unknown for the frontend itself, so make it catch-all to allow access. /reviewed-on !497
-
Łukasz Nowak authored
Because of misleading tests (Accept-Encoding with gzip was always set by requests, fixed in "caddy-frontend/test: Workaround requests issue with Accept-Encoding") the original commit "Fix/caddy frontend prefer gzip type zope" did not really fixed the issue for type:zope backend.
-
Łukasz Nowak authored
requests set Accept-Encoding header, but in the testr environment we want to have full control over its behaviour, thus not setting any header if not really wanted. As there is not known way to avoid setting the header (skip_accept_encoding is internal to httplib) set dummy Accept-Encoding header, which is enough for our environment.
-
Jérome Perrin authored
Hopefully fix the random failure with: ``` test_connect (test.TestSSHServer) ... /srv/slapgrid/slappart3/srv/testnode/byx/soft/a452c8ac557f7eaea3c20f6cc373c390/eggs/paramiko-2.4.2-py2.7.egg/paramiko/client.py:822: UserWarning: Unknown ecdsa-sha2-nistp521 host key for [2001:67c:1254:e:4a::7bd5]:22222: 22c41f5090433152d1e5395a85d6cb4f key.get_name(), hostname, hexlify(key.get_fingerprint()) FAIL ====================================================================== FAIL: test_connect (test.TestSSHServer) ---------------------------------------------------------------------- Traceback (most recent call last): File "/srv/slapgrid/slappart3/srv/testnode/byx/soft/a452c8ac557f7eaea3c20f6cc373c390/parts/slapos-repository/software/seleniumserver/test/test.py", line 357, in test_connect self.assertIn("Welcome to SlapOS Selenium Server.", channel.recv(100)) AssertionError: 'Welcome to SlapOS Selenium Server.' not found in 'Attempt to write login records by non-root user (aborting)\r\r\n' ---------------------------------------------------------------------- ``` Also publish the fingerprint of the server ssh key, which addresses this warning in the correct way (I feel) and since we can publish the fingerprint, why not. /reviewed-on nexedi/slapos!492
-
- 14 Jan, 2019 1 commit
-
-
Łukasz Nowak authored
Since "stack/monitor: Add auto-restart on certificate-authority section" certificate authority is correctly exposed in supervisor with its hash.
-
- 11 Jan, 2019 7 commits
-
-
Alain Takoudjou authored
-
Guillaume Hervier authored
/reviewed-on nexedi/slapos!500
-
Guillaume Hervier authored
/reviewed-on nexedi/slapos!499
-
Alain Takoudjou authored
-
Alain Takoudjou authored
-
Xiaowu Zhang authored
-
Xiaowu Zhang authored
-
- 10 Jan, 2019 7 commits
-
-
Alain Takoudjou authored
-
Thomas Gambier authored
-
Thomas Gambier authored
Remove all references to deprecated directories. The promises inside monitor-directory:promises directory are not run anymore by slapgrid. The scripts inside monitor-directory:reports are not run either. In this PR, we just update the directory location: * promise directory is now etc/promise (${directory:promise}) * reports directory is now bin (${directory:bin}) /cc @alain.takoudjou @rafael /reviewed-on nexedi/slapos!490
-
Thomas Gambier authored
-
Thomas Gambier authored
-
Thomas Gambier authored
-
Thomas Gambier authored
-
- 09 Jan, 2019 3 commits
-
-
Thomas Gambier authored
-
Rafael Monnerat authored
-
Jérome Perrin authored
so that on first connection clients can check the fingerprint key instead of blindly accepting it.
-
- 08 Jan, 2019 2 commits
-
-
Jérome Perrin authored
This seem to be needed "sometimes", apparently on the first connection after server is started, but this was not investigated much.
-
Jérome Perrin authored
In "direct zope access" ports, the shared frontend is not used, so the argument that long timeout consume resources on shared server does not apply here. A timeout of one hour was choosen arbitrarily, a value that should be large enough for normal requests and more than the default 60s timeout that we hit in the "wait for activities" step when running zelenium tests.
-