This has security implications

https://gitlab.com/gitlab-org/gitlab-foss/-/issues/9079

This test also segfaults on v7.0.1 (before Nexedi patches) with both go
1.12 and also go 1.18.

My understanding of this test is that this emulates a proxy which
delegates service the blob to workhorse and writes a wrong blob content
(GNU Licence) and we expect that the actual blob content (MIT Licence)
is served, regardless of what the proxy have written, so it does not
seem so important to simulate the proxy writing something wrong, as
long as we assert that the actual received content is correct.

@rafael approached me and asked why URLs like

	https://gitlab-ci-token:XXX@hostname/group/project/raw/master/file

work in CURL, but not in Chrome under AJAX requests.

After investigation it turned out they neither work in WGET and give 302
redirect to http://localhost:8080/users/sign_in:

	kirr@deco:~$ wget https://gitlab-ci-token:XXX@lab.nexedi.com/kirr/test/raw/master/hello.txt
	--2018-06-04 13:14:04--  https://gitlab-ci-token:*password*@lab.nexedi.com/kirr/test/raw/master/hello.txt
	Resolving lab.nexedi.com (lab.nexedi.com)... 176.31.129.213, 85.118.38.162
	Connecting to lab.nexedi.com (lab.nexedi.com)|176.31.129.213|:443... connected.
	HTTP request sent, awaiting response... 302 Found
	Location: http://localhost:8080/users/sign_in [following]
	--2018-06-04 13:14:04--  http://localhost:8080/users/sign_in
	Resolving localhost (localhost)... 127.0.0.1, ::1
	Connecting to localhost (localhost)|127.0.0.1|:8080... failed: Connection refused.
	Connecting to localhost (localhost)|::1|:8080... failed: Connection refused.

This turned out to be due to most clients (in fine accordance with RFC2617 /
RFC7617) first send request without Authorization header set and retry it with
that header only if server challenges it to(*), and our authorization code was
only trying to handle HTTP basic auth if Authorization header was provided
without issuing any challenge on server side.

Fix it by checking Rails backend reply for 302, which it gives for
unauthorized non-raw requests, and on our side convert it HTTP Basic
auth challenge if raw request does not contain any token. This way it
now works with user:password in URLs for both WGET and Chrome.

If any tokens were provided we leave Rails auth response as is because
we handle user/password only for that "no token provided at all" case.

(*) see https://en.wikipedia.org/wiki/Basic_access_authentication for overview.
/cc @alain.takoudjou, @jerome

/reviewed-on nexedi/gitlab-workhorse!2

Adjust the test because download-archive format has been changed (see
fixup to first patch in nxd series), while `git fetch` expects the old
way.

[ Not sent upstream.

  The patch was not sent upstream, because previous 2 raw blob patches
  were not accepted (see details there).

  OTOH it is very handy in SlapOS environment to use CI token auth for
  raw downloading, so just carry with us as NXD. ]

There are cases when using user:password for /raw/... access is handy:

- when using query for auth (private_token) is not convenient for some
  reason (e.g. client processing software does not handle queries well
  when generating URLs)

- when we do not want to organize many artificial users and use their
  tokens, but instead just use per-project automatically setup

    gitlab-ci-token : <ci-token>

  artificial user & "password" which are already handled by auth backend
  for `git fetch` requests.

Handling is easy: if main auth backend rejects access, and there is
user:password in original request, we retry asking auth backend the way
as `git fetch` would do.

Access is granted if any of two ways to ask auth backend succeeds. This
way both private tokens / cookies and HTTP auth are supported.

[ Sent upstream: https://gitlab.com/gitlab-org/gitlab-workhorse/merge_requests/17

  This patch was sent upstream but was not accepted for "complexity"
  reason of auth cache, despite that provides more than an order of magnitude
  speedup. Just carry it with us as NXD ]

In previous patch we added code to serve blob content via running `git cat-file
...` directly, but for every such request a request to slow RoR-based auth
backend is made, which is bad for performance.

Let's cache auth backend reply for small period of time, e.g. 30 seconds, which
will change the situation dramatically:

If we have a lot of requests to the same repository, we query auth backend only
for every Nth request and with e.g. 100 raw blob request/s N=3000 which means
that previous load to RoR code essentially goes away.

On the other hand as we query auth backend only once in a while and refresh the
cache, we will not miss potential changes in project settings. I mean potential
e.g. 25 seconds delay for a project to become public, or vise versa to become
private does no real harm.

The cache is done with the idea to allow the read side codepath to execute in
parallel and to be not blocked by eventual cache updates.

Overall this improves performance a lot:

  (on a 8-CPU i7-3770S with 16GB of RAM, 2001:67c:1254:e:8b::c776 is on localhost)

  # request is handled by gitlab-workhorse, but without auth caching
  $ ./wrk -c40 -d10 -t1 --latency http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
  Running 10s test @ http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
    1 threads and 40 connections
    Thread Stats   Avg      Stdev     Max   +/- Stdev
      Latency   458.42ms   66.26ms 766.12ms   84.76%
      Req/Sec    85.38     16.59   120.00     82.00%
    Latency Distribution
       50%  459.26ms
       75%  490.09ms
       90%  523.95ms
       99%  611.33ms
    853 requests in 10.01s, 1.51MB read
  Requests/sec:     85.18
  Transfer/sec:    154.90KB

  # request goes to gitlab-workhorse with auth caching (this patch)
  $ ./wrk -c40 -d10 -t1 --latency http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
  Running 10s test @ http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
    1 threads and 40 connections
    Thread Stats   Avg      Stdev     Max   +/- Stdev
      Latency    34.52ms   19.28ms 288.63ms   74.74%
      Req/Sec     1.20k   127.21     1.39k    85.00%
    Latency Distribution
       50%   32.67ms
       75%   42.73ms
       90%   56.26ms
       99%   99.86ms
    11961 requests in 10.01s, 21.24MB read
  Requests/sec:   1194.51
  Transfer/sec:      2.12MB

i.e. it is ~ 14x improvement.

During 0.6.4..0.6.5 upstream reworked the way request about downloading
archive is replied. Before it was json in body, after it is json in
headers handled via so-called "senddata" workhorse mechanism:

    https://gitlab.com/gitlab-org/gitlab-workhorse/commit/153527fb

Adjust our patch accordingly about requesting whether it is ok to
download from repository or not.

[ Sent upstream: https://gitlab.com/gitlab-org/gitlab-workhorse/merge_requests/17

  This patch was sent upstream but was not accepted for "complexity"
  reason of auth cache (next patch), despite that provides more than an
  order of magnitude speedup. Just carry it with us as NXD ]

Currently GitLab serves requests to get raw blobs via Ruby-on-Rails code and
Unicorn. Because RoR/Unicorn is relatively heavyweight, in environment where
there are a lot of simultaneous requests to get raw blobs, this works very slow
and server is constantly overloaded.

On the other hand, to get raw blob content, we do not need anything from RoR
framework - we only need to have access to project git repository on filesystem,
and knowing whether access for getting data from there should be granted or
not. That means it is possible to handle '.../raw/....' request directly
in more lightweight and performant gitlab-workhorse.

As gitlab-workhorse is written in Go, and Go has good concurrency/parallelism
support and is generally much faster than Ruby, moving raw blob serving task to
it makes sense and should be a net win.

In this patch: we add infrastructure to process GET request for '/raw/...':

- extract project / ref and path from URL
- query auth backend for whether download access should be granted or not
- emit blob content via spawning external `git cat-file`

I've tried to mimic the output to be as close as the one emitted by RoR code,
with the idea that for users the change should be transparent.

As in this patch we do auth backend query for every request to get a blob, RoR
code is still loaded very much, so essentially there is no speedup yet:

  (on a 8-CPU i7-3770S with 16GB of RAM, 2001:67c:1254:e:8b::c776 is on localhost)

  # without patch: request eventually goes to unicorn  (9 unicorn workers)
  $ ./wrk -c40 -d10 -t1 --latency http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
  Running 10s test @ http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
    1 threads and 40 connections
    Thread Stats   Avg      Stdev     Max   +/- Stdev
      Latency   461.16ms   63.44ms 809.80ms   84.18%
      Req/Sec    84.84     17.02   131.00     80.00%
    Latency Distribution
       50%  460.21ms
       75%  492.83ms
       90%  524.67ms
       99%  636.49ms
    847 requests in 10.01s, 1.57MB read
  Requests/sec:     84.64
  Transfer/sec:    161.10KB

  # with this patch: request handled by gitlab-workhorse
  $ ./wrk -c40 -d10 -t1 --latency http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
  Running 10s test @ http://[2001:67c:1254:e:8b::c776]:7777/nexedi/slapos/raw/master/software/wendelin/software.cfg
    1 threads and 40 connections
    Thread Stats   Avg      Stdev     Max   +/- Stdev
      Latency   458.42ms   66.26ms 766.12ms   84.76%
      Req/Sec    85.38     16.59   120.00     82.00%
    Latency Distribution
       50%  459.26ms
       75%  490.09ms
       90%  523.95ms
       99%  611.33ms
    853 requests in 10.01s, 1.51MB read
  Requests/sec:     85.18
  Transfer/sec:    154.90KB

In the next patch we'll cache requests to auth backend and that will improve
performance dramatically.

NOTE 20160228: there is internal/git/blob.go trying to get raw data via
    gitlab-workhorse, but still asking Unicorn about blob->sha1 mapping
    etc. That work started in

        86aaa133 (Prototype blobs via workhorse, @jacobvosmaer)

    and was inspired by this patch. It goes out of line compared to what
    we can do if we serve all blob data just by gitlab-workhorse (see
    next patch), so we just avoid git/blob.go and put our stuff into
    git/xblob.go and tweak routes, essentially deactivating git/blob.go
    code.

Set content-length when sending git blobs

This gives the HTTP client receiving the blob a way to detect some
transmission failures.

See merge request !41

This gives the HTTP client receiving the blob a way to detect some
transmission failures.

Handle "git archive" via headers

Companion to https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/2675

See merge request !36

Unset Content-Length for raw Git blobs

Fixes https://gitlab.com/gitlab-org/gitlab-workhorse/merge_requests/30#note_3560130

Failure to get raw Git blob via /api/v3 with error:

error: SendBlob: copy git cat-file stdout: Conn.Write wrote more than the declared Content-Length

See merge request !37

Blobs via workhorse

Works together with https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/2451

See merge request !30

This is meant as an extra layer of defense against untrusted user
input.

Fixed typo



See merge request !35