Merge tag 'imx-dt64-5.5' of...

Merge tag 'imx-dt64-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.5:
 - Add the initial support for a new arm64 family SoC from NXP:
   S32V234 ("Treerunner") vision microprocessors which are targeted for
   high-performance, computationally intensive vision and sensor fusion
   applications that require automotive safety levels.
 - New board support: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri and
   S32V234 EVB.
 - A series of patch from Andrey Smirnov to improve zii-ultra support by
   fixing regulator and adding accelerometer, switch watchdog.
 - Add system counter device and enable cpuidle support for i.MX8MN.
 - Move usdhc clocks assignment from SoC to board level DTS for
   i.MX8 based boards.
 - Add PCA6416 on I2C3 bus for imx8mm-evk, and enable SCU key for
   imx8qxp-mek board.
 - Enable GPU passive throttling on i.MX8MQ SoC, and add DDR PMU device
   for i.MX8MN.
 - A series from Fabio Estevam to fix DTC W=1 warnings for LS1028A device.
 - Update the clock providers for the Mali DP500 and '#clock-cells' of
   DPCLK node for LS1028A SoC.
 - Misc small updates on various boards.

* tag 'imx-dt64-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
  arm64: dts: imx8mn-evk: Remove invalid Atheros properties
  arm64: dts: freescale: add initial support for colibri imx8x
  arm64: dts: ls1028a: Fix tmu unit address
  arm64: dts: ls1028a: Move thermal-zone out of SoC
  arm64: dts: ls1028a-qds: Remove unnecessary #address-cells/#size-cells
  arm64: dts: imx8mn: Remove duplicated machine compatible
  arm64: dts: imx8mm: Remove duplicated machine compatible
  arm64: dts: imx8mq-evk: Add remote control
  arm64: dts: imx8mn: Add LPDDR4 EVK board support
  arm64: dts: imx8mn: Create EVK dtsi file for common use
  arm64: dts: imx8mn: Move usdhc clocks assignment to board DT
  arm64: dts: imx8mm: Move usdhc clocks assignment to board DT
  arm64: dts: imx8mq: Move usdhc clocks assignment to board DT
  arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT
  arm64: dts: fsl: Add device tree for S32V234-EVB
  arm64: dts: imx8mm-evk: Assigned clocks for audio plls
  arm64: dts: zii-ultra: Add node for switch watchdog
  arm64: dts: zii-ultra: Add node for accelerometer
  arm64: dts: zii-ultra: Fix regulator-3p3-main's name
  arm64: dts: zii-ultra: Fix regulator-vsd-3v3's vin-supply
  ...

Link: https://lore.kernel.org/r/20191105150315.15477-5-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/freescale/Makefile

@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
@@ -31,4 +32,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+
+dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts

@@ -194,8 +194,6 @@ sgtl5000: audio-codec@a {
 	};
 
 	fpga@66 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c",
 			     "simple-mfd";
 		reg = <0x66>;

arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts

@@ -184,3 +184,7 @@ &sai4 {
 &sata {
 	status = "okay";
 };
+
+&usb1 {
+	dr_mode = "otg";
+};

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -82,22 +82,8 @@ osc_27m: clock-osc-27m {
 	dpclk: clock-controller@f1f0000 {
 		compatible = "fsl,ls1028a-plldig";
 		reg = <0x0 0xf1f0000 0x0 0xffff>;
-		#clock-cells = <1>;
-		clocks = <&osc_27m>;
-	};
-
-	aclk: clock-axi {
-		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <650000000>;
-		clock-output-names= "aclk";
-	};
-
-	pclk: clock-apb {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <650000000>;
-		clock-output-names= "pclk";
+		clocks = <&osc_27m>;
 	};
 
 	reboot {
@@ -142,6 +128,37 @@ its: gic-its@6020000 {
 		};
 	};
 
+	thermal-zones {
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -542,7 +559,7 @@ sai4: audio-controller@f130000 {
 			status = "disabled";
 		};
 
-		tmu: tmu@1f00000 {
+		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
@@ -594,37 +611,6 @@ tmu: tmu@1f00000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			core-cluster {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					core_cluster_alert: core-cluster-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					core_cluster_crit: core-cluster-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&core_cluster_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 			compatible = "pci-host-ecam-generic";
 			reg = <0x01 0xf0000000 0x0 0x100000>;
@@ -679,7 +665,8 @@ malidp0: display@f080000 {
 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "DE", "SE";
-		clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>;
+		clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
+			 <&clockgen 2 2>;
 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
 		arm,malidp-arqos-value = <0xd000d000>;

arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts

@@ -122,6 +122,10 @@ qflash1: flash@1 {
 	};
 };
 
+&usb1 {
+	dr_mode = "otg";
+};
+
 #include "fsl-ls1046-post.dtsi"
 
 &fman0 {

arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts

@@ -95,5 +95,6 @@ &usb0 {
 };
 
 &usb1 {
+	dr_mode = "otg";
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

@@ -586,6 +586,7 @@ esdhc0: esdhc@2140000 {
 			reg = <0x0 0x2140000 0x0 0x10000>;
 			interrupts = <0 28 0x4>; /* Level high type */
 			clocks = <&clockgen 4 1>;
+			dma-coherent;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			little-endian;
@@ -598,6 +599,7 @@ esdhc1: esdhc@2150000 {
 			reg = <0x0 0x2150000 0x0 0x10000>;
 			interrupts = <0 63 0x4>; /* Level high type */
 			clocks = <&clockgen 4 1>;
+			dma-coherent;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			broken-cd;

arch/arm64/boot/dts/freescale/imx8mm-evk.dts

@@ -62,6 +62,8 @@ sound-wm8524 {
 
 		cpudai: simple-audio-card,cpu {
 			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
 		};
 
 		simple-audio-card,codec {
@@ -94,68 +96,6 @@ ethphy0: ethernet-phy@0 {
 	};
 };
 
-&sai3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <24576000>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart2 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-	usb-role-switch;
-	status = "okay";
-
-	port {
-		usb1_drd_sw: endpoint {
-			remote-endpoint = <&typec1_dr_sw>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -306,6 +246,86 @@ typec1_con: connector {
 	};
 };
 
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 
@@ -355,6 +375,13 @@ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
 		>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
 	pinctrl_pmic: pmicirq {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -12,7 +12,6 @@
 #include "imx8mm-pinfunc.h"
 
 / {
-	compatible = "fsl,imx8mm";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -426,7 +425,7 @@ gpr: iomuxc-gpr@30340000 {
 			};
 
 			ocotp: ocotp-ctrl@30350000 {
-				compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon";
+				compatible = "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
 				/* For nvmem subnodes */
@@ -479,14 +478,18 @@ clk: clock-controller@30380000 {
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>;
+						<&clk IMX8MM_VIDEO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL2>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
 							 <&clk IMX8MM_SYS_PLL1_800M>;
 				assigned-clock-rates = <0>,
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>;
+							<594000000>,
+							<393216000>,
+							<361267200>;
 			};
 
 			src: reset-controller@30390000 {
@@ -698,8 +701,6 @@ usdhc1: mmc@30b40000 {
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
-				assigned-clock-rates = <400000000>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step= <2>;
 				bus-width = <4>;
@@ -728,8 +729,6 @@ usdhc3: mmc@30b60000 {
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
-				assigned-clock-rates = <400000000>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step= <2>;
 				bus-width = <4>;

arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts

@@ -6,205 +6,18 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
 
 / {
 	model = "NXP i.MX8MNano DDR4 EVK board";
 	compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	reg_usdhc2_vmmc: regulator-usdhc2 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &A53_0 {
 	cpu-supply = <&buck2_reg>;
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_fec1: fec1grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
-			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
-			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
-			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
-			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
-			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
-			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
-			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
-			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
-			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
-			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
-			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
-			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
-			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
-		>;
-	};
-
-	pinctrl_pmic: pmicirq {
-		fsl,pins = <
-			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
-		>;
-	};
-
-	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
-			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2grpgpio {
-		fsl,pins = <
-			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
-			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
-			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
-			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
-			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
-			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
-			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
-			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
-			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
-			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
-			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
-			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
-			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
-			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
-			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
-			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
-			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
-			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
-			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
-			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
-			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
-			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
-			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
-			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
-			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
-			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
-			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
-			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
-			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
-			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
-			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
-			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
-			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
-			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
-			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
-			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
-			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
-			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
-			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
-			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
-			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
-			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
-			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
-			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
-			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
-			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
-			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
-			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
-			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
-		>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			at803x,led-act-blind-workaround;
-			at803x,eee-disabled;
-			at803x,vddio-1p8v;
-		};
-	};
-};
-
 &i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
@@ -309,40 +122,10 @@ ldo6_reg: LDO6 {
 	};
 };
 
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart2 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
+&iomuxc {
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
 };

arch/arm64/boot/dts/freescale/imx8mn-evk.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+
+/ {
+	model = "NXP i.MX8MNano EVK board";
+	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	/delete-property/operating-points-v2;
+};
+
+&A53_1 {
+	/delete-property/operating-points-v2;
+};
+
+&A53_2 {
+	/delete-property/operating-points-v2;
+};
+
+&A53_3 {
+	/delete-property/operating-points-v2;
+};

arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -11,7 +11,6 @@
 #include "imx8mn-pinfunc.h"
 
 / {
-	compatible = "fsl,imx8mn";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -43,6 +42,19 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
 		A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
@@ -54,6 +66,7 @@ A53_0: cpu@0 {
 			operating-points-v2 = <&a53_opp_table>;
 			nvmem-cells = <&cpu_speed_grade>;
 			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_1: cpu@1 {
@@ -65,6 +78,7 @@ A53_1: cpu@1 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_2: cpu@2 {
@@ -76,6 +90,7 @@ A53_2: cpu@2 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_3: cpu@3 {
@@ -87,6 +102,7 @@ A53_3: cpu@3 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -320,7 +336,7 @@ gpr: iomuxc-gpr@30340000 {
 			};
 
 			ocotp: ocotp-ctrl@30350000 {
-				compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon";
+				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
 				#address-cells = <1>;
@@ -371,7 +387,7 @@ clk: clock-controller@30380000 {
 			};
 
 			src: reset-controller@30390000 {
-				compatible = "fsl,imx8mn-src", "syscon";
+				compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon";
 				reg = <0x30390000 0x10000>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
@@ -428,6 +444,14 @@ pwm4: pwm@30690000 {
 				#pwm-cells = <2>;
 				status = "disabled";
 			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -573,8 +597,6 @@ usdhc1: mmc@30b40000 {
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX8MN_CLK_USDHC1>;
-				assigned-clock-rates = <400000000>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step= <2>;
 				bus-width = <4>;
@@ -603,8 +625,6 @@ usdhc3: mmc@30b60000 {
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
-				assigned-clock-rates = <400000000>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step= <2>;
 				bus-width = <4>;
@@ -738,6 +758,12 @@ gic: interrupt-controller@38800000 {
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	usbphynop1: usbphynop1 {

arch/arm64/boot/dts/freescale/imx8mq-evk.dts

@@ -48,6 +48,15 @@ buck2_reg: regulator-buck2 {
 		gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		states = <1000000 0x0
 			  900000 0x1>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
 	};
 
 	wm8524: audio-codec {
@@ -115,15 +124,6 @@ ethphy0: ethernet-phy@0 {
 	};
 };
 
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
-	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wifi_reset>;
@@ -242,6 +242,29 @@ &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };
 
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	n25q256a: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -261,21 +284,9 @@ &usb_dwc3_1 {
 	status = "okay";
 };
 
-&qspi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
-	n25q256a: flash@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-	};
-};
-
 &usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -289,6 +300,8 @@ &usdhc1 {
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
@@ -340,6 +353,12 @@ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
 		>;
 	};
 
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x4f
+		>;
+	};
+
 	pinctrl_pcie0: pcie0grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76

arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts

@@ -110,6 +110,8 @@ &uart3 { /* Mikrobus */
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;

arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts

@@ -780,6 +780,8 @@ &usb_dwc3_1 {
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -790,6 +792,8 @@ &usdhc1 {
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;

arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts

@@ -191,6 +191,8 @@ &uart2 {
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;

arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts

@@ -207,6 +207,8 @@ &uart1 { /* console */
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -217,6 +219,8 @@ &usdhc1 {
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;

arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi

@@ -170,6 +170,8 @@ &uart4 { /* ublox BT */
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi

@@ -62,7 +62,16 @@ reg_5p0_main: regulator-5p0-main {
 	reg_3p3_main: regulator-3p3-main {
 		compatible = "regulator-fixed";
 		vin-supply = <&reg_12p0_main>;
-		regulator-name = "3V3V_MAIN";
+		regulator-name = "3V3_MAIN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_gen_3p3: regulator-gen-3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_3p3_main>;
+		regulator-name = "GEN_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
@@ -72,7 +81,7 @@ reg_usdhc2_vmmc: regulator-vsd-3v3 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_usdhc2>;
 		compatible = "regulator-fixed";
-		vin-supply = <&reg_3p3_main>;
+		vin-supply = <&reg_gen_3p3>;
 		regulator-name = "3V3_SD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -253,6 +262,18 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x1c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT2";
+		vdd-supply = <&reg_gen_3p3>;
+		vddio-supply = <&reg_gen_3p3>;
+	};
+
 	ucs1002: charger@32 {
 		compatible = "microchip,ucs1002";
 		pinctrl-names = "default";
@@ -379,6 +400,11 @@ usbhub: usbhub@2c {
 		reg = <0x2c>;
 		reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	};
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
 };
 
 &i2c4 {
@@ -486,6 +512,8 @@ &pgc_vpu {
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -499,6 +527,8 @@ &usdhc1 {
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
@@ -513,6 +543,12 @@ &snvs_rtc {
 };
 
 &iomuxc {
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -235,12 +235,26 @@ gpu-thermal {
 			thermal-sensors = <&tmu 1>;
 
 			trips {
+				gpu_alert: gpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
 				gpu-crit {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		vpu-thermal {
@@ -854,8 +868,6 @@ usdhc1: mmc@30b40000 {
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
-				assigned-clock-rates = <400000000>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step = <2>;
 				bus-width = <4>;
@@ -949,6 +961,7 @@ gpu: gpu@38000000 {
 			         <&clk IMX8MQ_CLK_GPU_AXI>,
 			         <&clk IMX8MQ_CLK_GPU_AHB>;
 			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
 			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
 			                  <&clk IMX8MQ_CLK_GPU_AXI>,

arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts

@@ -133,6 +133,8 @@ ethphy0: ethernet-phy@0 {
 &usdhc1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
+	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
@@ -149,6 +151,8 @@ brcmf: wifi@1 {
 
 /* SD */
 &usdhc2 {
+	assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;

arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts

+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8qxp-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx8x-eval-v3",
+		     "toradex,colibri-imx8x", "fsl,imx8qxp";
+};

arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi

+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+#include "dt-bindings/input/linux-event-codes.h"
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+};
+
+&adma_i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* Colibri UART_B */
+&adma_lpuart0 {
+	status= "okay";
+};
+
+/* Colibri UART_C */
+&adma_lpuart2 {
+	status= "okay";
+};
+
+/* Colibri UART_A */
+&adma_lpuart3 {
+	status= "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};

arch/arm64/boot/dts/freescale/imx8qxp-mek.dts

@@ -137,6 +137,8 @@ light-sensor@44 {
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <8>;
@@ -147,6 +149,8 @@ &usdhc1 {
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
@@ -234,3 +238,7 @@ IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
 &adma_dsp {
 	status = "okay";
 };
+
+&scu_key {
+	status = "okay";
+};

arch/arm64/boot/dts/freescale/imx8qxp.dtsi

@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qxp.h>
 
@@ -174,6 +175,12 @@ pd: imx8qx-pd {
 			#power-domain-cells = <1>;
 		};
 
+		scu_key: scu-key {
+			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			status = "disabled";
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
@@ -361,8 +368,6 @@ usdhc1: mmc@5b010000 {
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
 			clock-names = "ipg", "per", "ahb";
-			assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
-			assigned-clock-rates = <200000000>;
 			power-domains = <&pd IMX_SC_R_SDHC_0>;
 			status = "disabled";
 		};
@@ -376,8 +381,6 @@ usdhc2: mmc@5b020000 {
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
 			clock-names = "ipg", "per", "ahb";
-			assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
-			assigned-clock-rates = <200000000>;
 			power-domains = <&pd IMX_SC_R_SDHC_1>;
 			fsl,tuning-start-tap = <20>;
 			fsl,tuning-step= <2>;
@@ -393,8 +396,6 @@ usdhc3: mmc@5b030000 {
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
 			clock-names = "ipg", "per", "ahb";
-			assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>;
-			assigned-clock-rates = <200000000>;
 			power-domains = <&pd IMX_SC_R_SDHC_2>;
 			status = "disabled";
 		};

arch/arm64/boot/dts/freescale/s32v234-evb.dts

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ */
+
+/dts-v1/;
+#include "s32v234.dtsi"
+
+/ {
+	model = "NXP S32V234-EVB2 Board";
+	compatible = "fsl,s32v234-evb", "fsl,s32v234";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};

arch/arm64/boot/dts/freescale/s32v234.dtsi

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2018 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	compatible = "fsl,s32v234";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster0_l2_cache>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster0_l2_cache>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster1_l2_cache>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster1_l2_cache>;
+		};
+
+		cluster0_l2_cache: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2_cache: l2-cache1 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		/* clock-frequency might be modified by u-boot, depending on the
+		 * chip version.
+		 */
+		clock-frequency = <10000000>;
+	};
+
+	gic: interrupt-controller@7d001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x7d001000 0 0x1000>,
+		      <0 0x7d002000 0 0x2000>,
+		      <0 0x7d004000 0 0x2000>,
+		      <0 0x7d006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		aips0: aips-bus@40000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			reg = <0x0 0x40000000 0x0 0x7d000>;
+			ranges;
+
+			uart0: serial@40053000 {
+				compatible = "fsl,s32v234-linflexuart";
+				reg = <0x0 0x40053000 0x0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		aips1: aips-bus@40080000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			reg = <0x0 0x40080000 0x0 0x70000>;
+			ranges;
+
+			uart1: serial@400bc000 {
+				compatible = "fsl,s32v234-linflexuart";
+				reg = <0x0 0x400bc000 0x0 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+	};
+};