arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file

As an example, Armada 70x0 and 80x0 SoC 0xf9000000 region points to
RUNIT/SPICS0 while it is referenced in the DT as PCIe I/O memory
range. This shows that I/O memory has never been used/working on the
old SoCs despite the region being advertised. As PCIe I/O ranges will
not be supported in newer SoCs using CP11x co-processors, let's
simply drop them. It is not harmful in any case as PCIe device drivers
can do it all with the regular mapped memory anyway.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm64/boot/dts/marvell/armada-70x0.dtsi

@@ -19,7 +19,6 @@ aliases {
  */
 #define CP11X_NAME		cp0
 #define CP11X_BASE		f2000000
-#define CP11X_PCIE_IO_BASE	0xf9000000
 #define CP11X_PCIE_MEM_BASE	0xf6000000
 #define CP11X_PCIE0_BASE	f2600000
 #define CP11X_PCIE1_BASE	f2620000
@@ -29,7 +28,6 @@ aliases {
 
 #undef CP11X_NAME
 #undef CP11X_BASE
-#undef CP11X_PCIE_IO_BASE
 #undef CP11X_PCIE_MEM_BASE
 #undef CP11X_PCIE0_BASE
 #undef CP11X_PCIE1_BASE

arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi

@@ -179,8 +179,7 @@ &cp0_pcie0 {
 	num-lanes = <4>;
 	num-viewport = <8>;
 	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
-	ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
-		  0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
 	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
 	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
 	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",

arch/arm64/boot/dts/marvell/armada-80x0.dtsi

@@ -21,7 +21,6 @@ aliases {
  */
 #define CP11X_NAME		cp0
 #define CP11X_BASE		f2000000
-#define CP11X_PCIE_IO_BASE	0xf9000000
 #define CP11X_PCIE_MEM_BASE	0xf6000000
 #define CP11X_PCIE0_BASE	f2600000
 #define CP11X_PCIE1_BASE	f2620000
@@ -31,7 +30,6 @@ aliases {
 
 #undef CP11X_NAME
 #undef CP11X_BASE
-#undef CP11X_PCIE_IO_BASE
 #undef CP11X_PCIE_MEM_BASE
 #undef CP11X_PCIE0_BASE
 #undef CP11X_PCIE1_BASE
@@ -42,7 +40,6 @@ aliases {
  */
 #define CP11X_NAME		cp1
 #define CP11X_BASE		f4000000
-#define CP11X_PCIE_IO_BASE	0xfd000000
 #define CP11X_PCIE_MEM_BASE	0xfa000000
 #define CP11X_PCIE0_BASE	f4600000
 #define CP11X_PCIE1_BASE	f4620000
@@ -52,7 +49,6 @@ aliases {
 
 #undef CP11X_NAME
 #undef CP11X_BASE
-#undef CP11X_PCIE_IO_BASE
 #undef CP11X_PCIE_MEM_BASE
 #undef CP11X_PCIE0_BASE
 #undef CP11X_PCIE1_BASE

arch/arm64/boot/dts/marvell/armada-cp11x.dtsi

@@ -10,7 +10,6 @@
 
 #include "armada-common.dtsi"
 
-#define CP11X_PCIEx_IO_BASE(iface)	(CP11X_PCIE_IO_BASE + (iface *  0x10000))
 #define CP11X_PCIEx_MEM_BASE(iface)	(CP11X_PCIE_MEM_BASE + (iface *  0x1000000))
 #define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
 
@@ -507,11 +506,8 @@ CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
 		msi-parent = <&gic_v2m0>;
 
 		bus-range = <0 0xff>;
-		ranges =
-		/* downstream I/O */
-		<0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0  CP11X_PCIEx_IO_BASE(0) 0 0x10000
 		/* non-prefetchable memory */
-		0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
@@ -534,11 +530,8 @@ CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
 		msi-parent = <&gic_v2m0>;
 
 		bus-range = <0 0xff>;
-		ranges =
-		/* downstream I/O */
-		<0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0  CP11X_PCIEx_IO_BASE(1) 0 0x10000
 		/* non-prefetchable memory */
-		0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
@@ -562,11 +555,8 @@ CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
 		msi-parent = <&gic_v2m0>;
 
 		bus-range = <0 0xff>;
-		ranges =
-		/* downstream I/O */
-		<0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0  CP11X_PCIEx_IO_BASE(2) 0 0x10000
 		/* non-prefetchable memory */
-		0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;