Merge branch 'next-s5pv310' into for-next

Conflicts:
	arch/arm/mach-s5pv310/Kconfig
	arch/arm/mach-s5pv310/Makefile
	arch/arm/mach-s5pv310/mach-smdkc210.c
	arch/arm/mach-s5pv310/mach-smdkv310.c
	arch/arm/plat-samsung/include/plat/devs.h

arch/arm/mach-s5pv310/Kconfig

@@ -15,6 +15,11 @@ config CPU_S5PV310
 	help
 	  Enable S5PV310 CPU support
 
+config S5PV310_DEV_PD
+	bool
+	help
+	  Compile in platform device definitions for Power Domain
+
 config S5PV310_SETUP_I2C1
 	bool
 	help
@@ -75,6 +80,7 @@ config MACH_SMDKC210
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S5PV310_DEV_PD
 	select S5PV310_SETUP_I2C1
 	select S5PV310_SETUP_SDHCI
 	help
@@ -85,6 +91,10 @@ config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_S5PV310
 	select S5P_DEV_ONENAND
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S5PV310_SETUP_SDHCI
 	select S3C_DEV_I2C1
 	select S5PV310_SETUP_I2C1
 	help
@@ -105,6 +115,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S5PV310_DEV_PD
 	select S5PV310_SETUP_I2C1
 	select S5PV310_SETUP_SDHCI
 	help

arch/arm/mach-s5pv310/Makefile

@@ -27,7 +27,9 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 
 # device support
 
-obj-y += dev-audio.o
+obj-y					+= dev-audio.o
+obj-$(CONFIG_S5PV310_DEV_PD)		+= dev-pd.o
+
 obj-$(CONFIG_S5PV310_SETUP_I2C1)	+= setup-i2c1.o
 obj-$(CONFIG_S5PV310_SETUP_I2C2)	+= setup-i2c2.o
 obj-$(CONFIG_S5PV310_SETUP_I2C3)	+= setup-i2c3.o

arch/arm/mach-s5pv310/cpu.c

@@ -42,6 +42,11 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
 		.length		= SZ_128K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_PMU,
+		.pfn		= __phys_to_pfn(S5PV310_PA_PMU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
 		.pfn		= __phys_to_pfn(S5PV310_PA_COMBINER),
@@ -127,6 +132,15 @@ void __init s5pv310_init_irq(void)
 	gic_cpu_init(0, S5P_VA_GIC_CPU);
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+		/*
+		 * From SPI(0) to SPI(39) and SPI(51), SPI(53) are
+		 * connected to the interrupt combiner. These irqs
+		 * should be initialized to support cascade interrupt.
+		 */
+		if ((irq >= 40) && !(irq == 51) && !(irq == 53))
+			continue;
+
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
 				COMBINER_IRQ(irq, 0));
 		combiner_cascade_irq(irq, IRQ_SPI(irq));
@@ -168,7 +182,7 @@ static int __init s5pv310_l2x0_cache_init(void)
 	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
 		     S5P_VA_L2CC + L2X0_POWER_CTRL);
 
-	l2x0_init(S5P_VA_L2CC, 0x7C070001, 0xC200ffff);
+	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
 
 	return 0;
 }

arch/arm/mach-s5pv310/dev-pd.c

+/* linux/arch/arm/mach-s5pv310/dev-pd.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - Power Domain support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <mach/regs-pmu.h>
+
+#include <plat/pd.h>
+
+static int s5pv310_pd_enable(struct device *dev)
+{
+	struct samsung_pd_info *pdata =  dev->platform_data;
+	u32 timeout;
+
+	__raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base);
+
+	/* Wait max 1ms */
+	timeout = 10;
+	while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN)
+		!= S5P_INT_LOCAL_PWR_EN) {
+		if (timeout == 0) {
+			printk(KERN_ERR "Power domain %s enable failed.\n",
+				dev_name(dev));
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		udelay(100);
+	}
+
+	return 0;
+}
+
+static int s5pv310_pd_disable(struct device *dev)
+{
+	struct samsung_pd_info *pdata =  dev->platform_data;
+	u32 timeout;
+
+	__raw_writel(0, pdata->base);
+
+	/* Wait max 1ms */
+	timeout = 10;
+	while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) {
+		if (timeout == 0) {
+			printk(KERN_ERR "Power domain %s disable failed.\n",
+				dev_name(dev));
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		udelay(100);
+	}
+
+	return 0;
+}
+
+struct platform_device s5pv310_device_pd[] = {
+	{
+		.name		= "samsung-pd",
+		.id		= 0,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_MFC_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 1,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_G3D_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 2,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_LCD0_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 3,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_LCD1_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 4,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_TV_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 5,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_CAM_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 6,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_GPS_CONF,
+			},
+		},
+	},
+};

arch/arm/mach-s5pv310/include/mach/irqs.h

@@ -25,6 +25,8 @@
 
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
 
+#define IRQ_MCT1		IRQ_SPI(35)
+
 #define IRQ_EINT0		IRQ_SPI(40)
 #define IRQ_EINT1		IRQ_SPI(41)
 #define IRQ_EINT2		IRQ_SPI(42)
@@ -36,9 +38,8 @@
 #define IRQ_JPEG		IRQ_SPI(48)
 #define IRQ_2D			IRQ_SPI(49)
 #define IRQ_PCIE		IRQ_SPI(50)
-#define IRQ_SYSTEM_TIMER	IRQ_SPI(51)
+#define IRQ_MCT0		IRQ_SPI(51)
 #define IRQ_MFC			IRQ_SPI(52)
-#define IRQ_WDT			IRQ_SPI(53)
 #define IRQ_AUDIO_SS		IRQ_SPI(54)
 #define IRQ_AC97		IRQ_SPI(55)
 #define IRQ_SPDIF		IRQ_SPI(56)
@@ -91,6 +92,8 @@
 
 #define IRQ_ONENAND_AUDI	COMBINER_IRQ(34, 0)
 
+#define IRQ_MCT_L1		COMBINER_IRQ(35, 3)
+
 #define IRQ_EINT4		COMBINER_IRQ(37, 0)
 #define IRQ_EINT5		COMBINER_IRQ(37, 1)
 #define IRQ_EINT6		COMBINER_IRQ(37, 2)
@@ -107,7 +110,11 @@
 
 #define IRQ_EINT16_31		COMBINER_IRQ(39, 0)
 
-#define MAX_COMBINER_NR		40
+#define IRQ_MCT_L0		COMBINER_IRQ(51, 0)
+
+#define IRQ_WDT			COMBINER_IRQ(53, 0)
+
+#define MAX_COMBINER_NR		54
 
 #define S5P_IRQ_EINT_BASE	COMBINER_IRQ(MAX_COMBINER_NR, 0)
 

arch/arm/mach-s5pv310/include/mach/map.h

@@ -39,6 +39,8 @@
 #define S5PV310_PA_SYSCON		(0x10010000)
 #define S5P_PA_SYSCON			S5PV310_PA_SYSCON
 
+#define S5PV310_PA_PMU			(0x10020000)
+
 #define S5PV310_PA_CMU			(0x10030000)
 
 #define S5PV310_PA_WATCHDOG		(0x10060000)

arch/arm/mach-s5pv310/include/mach/regs-pmu.h

+/* linux/arch/arm/mach-s5pv310/include/mach/regs-pmu.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - Power management unit definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_PMU_H
+#define __ASM_ARCH_REGS_PMU_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_PMUREG(x)			(S5P_VA_PMU + (x))
+
+#define S5P_PMU_CAM_CONF		S5P_PMUREG(0x3C00)
+#define S5P_PMU_TV_CONF		S5P_PMUREG(0x3C20)
+#define S5P_PMU_MFC_CONF		S5P_PMUREG(0x3C40)
+#define S5P_PMU_G3D_CONF		S5P_PMUREG(0x3C60)
+#define S5P_PMU_LCD0_CONF		S5P_PMUREG(0x3C80)
+#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
+#define S5P_PMU_GPS_CONF		S5P_PMUREG(0x3CE0)
+
+#define S5P_INT_LOCAL_PWR_EN		0x7
+
+#endif /* __ASM_ARCH_REGS_PMU_H */

arch/arm/mach-s5pv310/irq-combiner.c

@@ -24,6 +24,7 @@ static DEFINE_SPINLOCK(irq_controller_lock);
 
 struct combiner_chip_data {
 	unsigned int irq_offset;
+	unsigned int irq_mask;
 	void __iomem *base;
 };
 
@@ -62,6 +63,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	spin_lock(&irq_controller_lock);
 	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
 	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
 
 	if (status == 0)
 		goto out;
@@ -104,10 +106,12 @@ void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
 
 	combiner_data[combiner_nr].base = base;
 	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
 
 	/* Disable all interrupts */
 
-	__raw_writel(0xffffffff, base + COMBINER_ENABLE_CLEAR);
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
 
 	/* Setup the Linux IRQ subsystem */
 

arch/arm/mach-s5pv310/mach-smdkc210.c

@@ -26,6 +26,7 @@
 #include <plat/devs.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
+#include <plat/pd.h>
 
 #include <mach/map.h>
 
@@ -146,16 +147,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 };
 
 static struct platform_device *smdkc210_devices[] __initdata = {
-	&s3c_device_i2c1,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c1,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
-	&smdkc210_smsc911x,
 	&s5pv310_device_ac97,
 	&s5pv310_device_i2s0,
+	&s5pv310_device_pd[PD_MFC],
+	&s5pv310_device_pd[PD_G3D],
+	&s5pv310_device_pd[PD_LCD0],
+	&s5pv310_device_pd[PD_LCD1],
+	&s5pv310_device_pd[PD_CAM],
+	&s5pv310_device_pd[PD_TV],
+	&s5pv310_device_pd[PD_GPS],
+	&smdkc210_smsc911x,
 };
 
 static void __init smdkc210_smsc911x_init(void)

arch/arm/mach-s5pv310/mach-smdkv310.c

@@ -26,6 +26,7 @@
 #include <plat/devs.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
+#include <plat/pd.h>
 
 #include <mach/map.h>
 
@@ -146,16 +147,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 };
 
 static struct platform_device *smdkv310_devices[] __initdata = {
-	&s3c_device_i2c1,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c1,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
-	&smdkv310_smsc911x,
 	&s5pv310_device_ac97,
 	&s5pv310_device_i2s0,
+	&s5pv310_device_pd[PD_MFC],
+	&s5pv310_device_pd[PD_G3D],
+	&s5pv310_device_pd[PD_LCD0],
+	&s5pv310_device_pd[PD_LCD1],
+	&s5pv310_device_pd[PD_CAM],
+	&s5pv310_device_pd[PD_TV],
+	&s5pv310_device_pd[PD_GPS],
+	&smdkv310_smsc911x,
 };
 
 static void __init smdkv310_smsc911x_init(void)

arch/arm/mach-s5pv310/mach-universal_c210.c

@@ -13,6 +13,9 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -21,6 +24,7 @@
 #include <plat/s5pv310.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/sdhci.h>
 
 #include <mach/map.h>
 
@@ -116,6 +120,73 @@ static struct platform_device universal_gpio_keys = {
 	},
 };
 
+/* eMMC */
+static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
+	.max_width		= 8,
+	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE),
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply mmc0_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
+static struct regulator_init_data mmc0_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "VMEM_VDD_2.8V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(mmc0_supplies),
+	.consumer_supplies	= mmc0_supplies,
+};
+
+static struct fixed_voltage_config mmc0_fixed_voltage_config = {
+	.supply_name		= "MASSMEMORY_EN",
+	.microvolts		= 2800000,
+	.gpio			= S5PV310_GPE1(3),
+	.enable_high		= true,
+	.init_data		= &mmc0_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc0_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &mmc0_fixed_voltage_config,
+	},
+};
+
+/* SD */
+static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.host_caps		= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE,
+	.ext_cd_gpio		= S5PV310_GPX3(4),      /* XEINT_28 */
+	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* WiFi */
+static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
+	.max_width		= 4,
+	.host_caps		= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+};
+
+static void __init universal_sdhci_init(void)
+{
+	s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
+	s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
+	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
+}
+
 /* I2C0 */
 static struct i2c_board_info i2c0_devs[] __initdata = {
 	/* Camera, To be updated */
@@ -127,6 +198,13 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 };
 
 static struct platform_device *universal_devices[] __initdata = {
+	/* Samsung Platform Devices */
+	&mmc0_fixed_voltage,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+
+	/* Universal Devices */
 	&universal_gpio_keys,
 	&s5p_device_onenand,
 };
@@ -140,6 +218,8 @@ static void __init universal_map_io(void)
 
 static void __init universal_machine_init(void)
 {
+	universal_sdhci_init();
+
 	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 

arch/arm/plat-s5p/include/plat/map-s5p.h

@@ -15,6 +15,7 @@
 
 #define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
 #define S5P_VA_CMU		S3C_ADDR(0x02100000)
+#define S5P_VA_PMU		S3C_ADDR(0x02180000)
 #define S5P_VA_GPIO		S3C_ADDR(0x02200000)
 #define S5P_VA_GPIO1		S5P_VA_GPIO
 #define S5P_VA_GPIO2		S3C_ADDR(0x02240000)

arch/arm/plat-samsung/include/plat/devs.h

@@ -104,6 +104,7 @@ extern struct platform_device s5pv310_device_i2s0;
 extern struct platform_device s5pv310_device_i2s1;
 extern struct platform_device s5pv310_device_i2s2;
 extern struct platform_device s5pv310_device_spdif;
+extern struct platform_device s5pv310_device_pd[];
 
 extern struct platform_device s5p6442_device_pcm0;
 extern struct platform_device s5p6442_device_pcm1;