Commit 2a2c74b2 authored by Alistair Popple's avatar Alistair Popple Committed by Benjamin Herrenschmidt

IBM Akebono: Add the Akebono platform

This patch adds support for the IBM Akebono board.
Signed-off-by: default avatarAlistair Popple <alistair@popple.id.au>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 6b11930f
IBM Akebono board device tree
=============================
The IBM Akebono board is a development board for the PPC476GTR SoC.
0) The root node
Required properties:
- model : "ibm,akebono".
- compatible : "ibm,akebono" , "ibm,476gtr".
1.a) The Secure Digital Host Controller Interface (SDHCI) node
Represent the Secure Digital Host Controller Interfaces.
Required properties:
- compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
- reg : should contain the SDHCI registers location and length.
- interrupt-parent : a phandle for the interrupt controller.
- interrupts : should contain the SDHCI interrupt.
1.b) The Advanced Host Controller Interface (AHCI) SATA node
Represents the advanced host controller SATA interface.
Required properties:
- compatible : should be "ibm,476gtr-ahci".
- reg : should contain the AHCI registers location and length.
- interrupt-parent : a phandle for the interrupt controller.
- interrupts : should contain the AHCI interrupt.
1.c) The FPGA node
The Akebono board stores some board information such as the revision
number in an FPGA which is represented by this node.
Required properties:
- compatible : should be "ibm,akebono-fpga".
- reg : should contain the FPGA registers location and length.
1.d) The AVR node
The Akebono board has an Atmel AVR microprocessor attached to the I2C
bus as a power controller for the board.
Required properties:
- compatible : should be "ibm,akebono-avr".
- reg : should contain the I2C bus address for the AVR.
......@@ -53,6 +53,7 @@ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
......@@ -92,6 +93,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
cuboot-taishan.c cuboot-katmai.c \
cuboot-warp.c cuboot-yosemite.c \
treeboot-iss4xx.c treeboot-currituck.c \
treeboot-akebono.c \
simpleboot.c fixed-head.S virtex.c
src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
......@@ -250,6 +252,7 @@ image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic
image-$(CONFIG_CURRITUCK) += treeImage.currituck
image-$(CONFIG_AKEBONO) += treeImage.akebono
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
......
......@@ -15,6 +15,10 @@
asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
rval; \
})
#define mtdcrx(rn, val) \
({ \
asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \
})
/* 440GP/440GX SDRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010
......
This diff is collapsed.
/*
* Copyright © 2013 Tony Breeds IBM Corporation
* Copyright © 2013 Alistair Popple IBM Corporation
*
* Based on earlier code:
* Copyright (C) Paul Mackerras 1997.
*
* Matt Porter <mporter@kernel.crashing.org>
* Copyright 2002-2005 MontaVista Software Inc.
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
*
* Copyright 2007 David Gibson, IBM Corporation.
* Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
* Copyright © 2011 David Kleikamp IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stdarg.h>
#include <stddef.h>
#include "types.h"
#include "elf.h"
#include "string.h"
#include "stdlib.h"
#include "stdio.h"
#include "page.h"
#include "ops.h"
#include "reg.h"
#include "io.h"
#include "dcr.h"
#include "4xx.h"
#include "44x.h"
#include "libfdt.h"
BSS_STACK(4096);
#define SPRN_PIR 0x11E /* Processor Indentification Register */
#define USERDATA_LEN 256 /* Length of userdata passed in by PIBS */
#define MAX_RANKS 0x4
#define DDR3_MR0CF 0x80010011U
#define CCTL0_MCO2 0x8000080FU
#define CCTL0_MCO3 0x80000810U
#define CCTL0_MCO4 0x80000811U
#define CCTL0_MCO5 0x80000812U
#define CCTL0_MCO6 0x80000813U
static unsigned long long ibm_akebono_memsize;
static long long unsigned mac_addr;
static unsigned long long ibm_akebono_detect_memsize(void)
{
u32 reg;
unsigned i;
unsigned long long memsize = 0;
for (i = 0; i < MAX_RANKS; i++) {
reg = mfdcrx(DDR3_MR0CF + i);
if (!(reg & 1))
continue;
reg &= 0x0000f000;
reg >>= 12;
memsize += (0x800000ULL << reg);
}
return memsize;
}
static void ibm_akebono_fixups(void)
{
void *emac;
u32 reg;
void *devp = finddevice("/");
u32 dma_ranges[7];
dt_fixup_memory(0x0ULL, ibm_akebono_memsize);
while ((devp = find_node_by_devtype(devp, "pci"))) {
if (getprop(devp, "dma-ranges", dma_ranges,
sizeof(dma_ranges)) < 0) {
printf("%s: Failed to get dma-ranges\r\n", __func__);
continue;
}
dma_ranges[5] = ibm_akebono_memsize >> 32;
dma_ranges[6] = ibm_akebono_memsize & 0xffffffffUL;
setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges));
}
/* Fixup the SD timeout frequency */
mtdcrx(CCTL0_MCO4, 0x1);
/* Disable SD high-speed mode (which seems to be broken) */
reg = mfdcrx(CCTL0_MCO2) & ~0x2;
mtdcrx(CCTL0_MCO2, reg);
/* Set the MAC address */
emac = finddevice("/plb/opb/ethernet");
if (emac > 0) {
if (mac_addr)
setprop(emac, "local-mac-address",
((u8 *) &mac_addr) + 2 , 6);
}
}
void platform_init(char *userdata)
{
unsigned long end_of_ram, avail_ram;
u32 pir_reg;
int node, size;
const u32 *timebase;
int len, i, userdata_len;
char *end;
userdata[USERDATA_LEN - 1] = '\0';
userdata_len = strlen(userdata);
for (i = 0; i < userdata_len - 15; i++) {
if (strncmp(&userdata[i], "local-mac-addr=", 15) == 0) {
if (i > 0 && userdata[i - 1] != ' ') {
/* We've only found a substring ending
* with local-mac-addr so this isn't
* our mac address. */
continue;
}
mac_addr = strtoull(&userdata[i + 15], &end, 16);
/* Remove the "local-mac-addr=<...>" from the kernel
* command line, including the tailing space if
* present. */
if (*end == ' ')
end++;
len = ((int) end) - ((int) &userdata[i]);
memmove(&userdata[i], end,
userdata_len - (len + i) + 1);
break;
}
}
loader_info.cmdline = userdata;
loader_info.cmdline_len = 256;
ibm_akebono_memsize = ibm_akebono_detect_memsize();
if (ibm_akebono_memsize >> 32)
end_of_ram = ~0UL;
else
end_of_ram = ibm_akebono_memsize;
avail_ram = end_of_ram - (unsigned long)_end;
simple_alloc_init(_end, avail_ram, 128, 64);
platform_ops.fixups = ibm_akebono_fixups;
platform_ops.exit = ibm44x_dbcr_reset;
pir_reg = mfspr(SPRN_PIR);
/* Make sure FDT blob is sane */
if (fdt_check_header(_dtb_start) != 0)
fatal("Invalid device tree blob\n");
node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
"cpu", sizeof("cpu"));
if (!node)
fatal("Cannot find cpu node\n");
timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
if (timebase && (size == 4))
timebase_period_ns = 1000000000 / *timebase;
fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
fdt_init(_dtb_start);
serial_console_init();
}
......@@ -270,6 +270,9 @@ gamecube|wii)
treeboot-currituck)
link_address='0x1000000'
;;
treeboot-akebono)
link_address='0x1000000'
;;
treeboot-iss4xx-mpic)
platformo="$object/treeboot-iss4xx.o"
;;
......
CONFIG_44x=y
CONFIG_SMP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_POWERNV_MSI is not set
CONFIG_PPC_47x=y
# CONFIG_EBONY is not set
CONFIG_AKEBONO=y
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_COMPACTION is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_SUSPEND is not set
CONFIG_PCI_MSI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SATA_PMP is not set
# CONFIG_ATA_SFF is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_IBM_EMAC=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS_DEFAULT="n"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00010000
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x33f
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1_PPC=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
......@@ -199,6 +199,32 @@ config CURRITUCK
help
This option enables support for the IBM Currituck (476fpe) evaluation board
config AKEBONO
bool "IBM Akebono (476gtr) Support"
depends on PPC_47x
default n
select SWIOTLB
select 476FPE
select PPC4xx_PCI_EXPRESS
select I2C
select I2C_IBM_IIC
select NETDEVICES
select ETHERNET
select NET_VENDOR_IBM
select IBM_EMAC_EMAC4
select IBM_EMAC_RGMII_WOL
select USB
select USB_OHCI_HCD_PLATFORM
select USB_EHCI_HCD_PLATFORM
select MMC_SDHCI
select MMC_SDHCI_PLTFM
select MMC_SDHCI_OF_476GTR
select ATA
select SATA_AHCI_PLATFORM
help
This option enables support for the IBM Akebono (476gtr) evaluation board
config ICON
bool "Icon"
depends on 44x
......
......@@ -11,3 +11,4 @@ obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx) += iss4xx.o
obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
obj-$(CONFIG_CURRITUCK) += ppc476.o
obj-$(CONFIG_AKEBONO) += ppc476.o
/*
* PowerPC 476FPE board specific routines
*
* Copyright © 2011 Tony Breeds IBM Corporation
* Copyright © 2013 Tony Breeds IBM Corporation
* Copyright © 2013 Alistair Popple IBM Corporation
*
* Based on earlier code:
* Matt Porter <mporter@kernel.crashing.org>
......@@ -35,6 +36,7 @@
#include <asm/mmu.h>
#include <linux/pci.h>
#include <linux/i2c.h>
static struct of_device_id ppc47x_of_bus[] __initdata = {
{ .compatible = "ibm,plb4", },
......@@ -55,15 +57,69 @@ static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
/* Akebono has an AVR microcontroller attached to the I2C bus
* which is used to power off/reset the system. */
/* AVR I2C Commands */
#define AVR_PWRCTL_CMD (0x26)
/* Flags for the power control I2C commands */
#define AVR_PWRCTL_PWROFF (0x01)
#define AVR_PWRCTL_RESET (0x02)
static struct i2c_client *avr_i2c_client;
static void avr_halt_system(int pwrctl_flags)
{
/* Request the AVR to reset the system */
i2c_smbus_write_byte_data(avr_i2c_client,
AVR_PWRCTL_CMD, pwrctl_flags);
/* Wait for system to be reset */
while (1)
;
}
static void avr_power_off_system(void)
{
avr_halt_system(AVR_PWRCTL_PWROFF);
}
static void avr_reset_system(char *cmd)
{
avr_halt_system(AVR_PWRCTL_RESET);
}
static int avr_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
avr_i2c_client = client;
ppc_md.restart = avr_reset_system;
ppc_md.power_off = avr_power_off_system;
return 0;
}
static const struct i2c_device_id avr_id[] = {
{ "akebono-avr", 0 },
{ }
};
static struct i2c_driver avr_driver = {
.driver = {
.name = "akebono-avr",
},
.probe = avr_probe,
.id_table = avr_id,
};
static int __init ppc47x_device_probe(void)
{
i2c_add_driver(&avr_driver);
of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
return 0;
}
machine_device_initcall(ppc47x, ppc47x_device_probe);
/* We can have either UICs or MPICs */
static void __init ppc47x_init_irq(void)
{
struct device_node *np;
......@@ -163,37 +219,30 @@ static void __init ppc47x_setup_arch(void)
ppc47x_smp_init();
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init ppc47x_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
return 0;
return 1;
}
static int board_rev = -1;
static int __init ppc47x_get_board_rev(void)
{
u8 fpga_reg0;
void *fpga;
struct device_node *np;
int reg;
u8 *fpga;
struct device_node *np = NULL;
if (of_machine_is_compatible("ibm,currituck")) {
np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
reg = 0;
} else if (of_machine_is_compatible("ibm,akebono")) {
np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga");
reg = 2;
}
np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
if (!np)
goto fail;
fpga = of_iomap(np, 0);
fpga = (u8 *) of_iomap(np, 0);
of_node_put(np);
if (!fpga)
goto fail;
fpga_reg0 = ioread8(fpga);
board_rev = fpga_reg0 & 0x03;
board_rev = ioread8(fpga + reg) & 0x03;
pr_info("%s: Found board revision %d\n", __func__, board_rev);
iounmap(fpga);
return 0;
......@@ -221,13 +270,30 @@ static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
}
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init ppc47x_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "ibm,akebono"))
return 1;
if (of_flat_dt_is_compatible(root, "ibm,currituck")) {
ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup;
return 1;
}
return 0;
}
define_machine(ppc47x) {
.name = "PowerPC 47x",
.probe = ppc47x_probe,
.progress = udbg_progress,
.init_IRQ = ppc47x_init_irq,
.setup_arch = ppc47x_setup_arch,
.pci_irq_fixup = ppc47x_pci_irq_fixup,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -1440,7 +1440,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
#endif
#ifdef CONFIG_476FPE
if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe"))
if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")
|| of_device_is_compatible(np, "ibm,plb-pciex-476gtr"))
ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
#endif
if (ppc4xx_pciex_hwops == NULL) {
......@@ -1751,7 +1752,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port,
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
| DCRO_PEGPL_OMRxMSKL_VAL);
else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
else if (of_device_is_compatible(
port->node, "ibm,plb-pciex-476fpe") ||
of_device_is_compatible(
port->node, "ibm,plb-pciex-476gtr"))
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
| DCRO_PEGPL_OMRxMSKL_VAL);
......@@ -1881,7 +1885,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
of_device_is_compatible(
port->node, "ibm,plb-pciex-476fpe") ||
of_device_is_compatible(
port->node, "ibm,plb-pciex-476gtr"))
sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment