Commit 2a322749 authored by Maksim Krasnyanskiy's avatar Maksim Krasnyanskiy

Merge qualcomm.com:/usr/src/bt-2.5 into qualcomm.com:/usr/src/linux-2.5

parents dc223510 709cacfe
menu "Bluetooth device drivers"
depends on BT!=n
depends on BT
config BT_HCIUSB
tristate "HCI USB driver"
......@@ -52,11 +52,19 @@ config BT_HCIUART_BCSP
help
BCSP (BlueCore Serial Protocol) is serial protocol for communication
between Bluetooth device and host. This protocol is required for non
USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
CF cards.
Say Y here to compile support for HCI BCSP protocol.
config BT_HCIUART_BCSP_TXCRC
bool "Transmit CRC with every BCSP packet"
depends on BT_HCIUART_BCSP
help
If you say Y here, a 16-bit CRC checksum will be transmitted along with
every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip.
This increases reliability, but slightly reduces efficiency.
config BT_HCIDTL1
tristate "HCI DTL1 (PC Card) driver"
depends on PCMCIA && BT
......@@ -64,8 +72,8 @@ config BT_HCIDTL1
Bluetooth HCI DTL1 (PC Card) driver.
This driver provides support for Bluetooth PCMCIA devices with
Nokia DTL1 interface:
Nokia Bluetooth Card
Socket Bluetooth CF Card
Nokia Bluetooth Card
Socket Bluetooth CF Card
Say Y here to compile support for HCI DTL1 devices into the
kernel or say M to compile it as module (dtl1_cs.o).
......@@ -73,12 +81,12 @@ config BT_HCIDTL1
config BT_HCIBT3C
tristate "HCI BT3C (PC Card) driver"
depends on PCMCIA && BT
---help---
help
Bluetooth HCI BT3C (PC Card) driver.
This driver provides support for Bluetooth PCMCIA devices with
3Com BT3C interface:
3Com Bluetooth Card (3CRWB6096)
HP Bluetooth Card
3Com Bluetooth Card (3CRWB6096)
HP Bluetooth Card
The HCI BT3C driver uses external firmware loader program provided in
the BlueFW package. For more information, see <http://bluez.sf.net>.
......@@ -92,9 +100,9 @@ config BT_HCIBLUECARD
help
Bluetooth HCI BlueCard (PC Card) driver.
This driver provides support for Bluetooth PCMCIA devices with
Anycom BlueCard interface:
Anycom Bluetooth PC Card
Anycom Bluetooth CF Card
Anycom BlueCard interface:
Anycom Bluetooth PC Card
Anycom Bluetooth CF Card
Say Y here to compile support for HCI BlueCard devices into the
kernel or say M to compile it as module (bluecard_cs.o).
......
......@@ -7,7 +7,7 @@ menu "Bluetooth support"
config BT
tristate "Bluetooth subsystem support"
---help---
help
Bluetooth is low-cost, low-power, short-range wireless technology.
It was designed as a replacement for cables and other short-range
technologies like IrDA. Bluetooth operates in personal area range
......@@ -15,12 +15,12 @@ config BT
Bluetooth can be found at <http://www.bluetooth.com/>.
Linux Bluetooth subsystem consist of several layers:
Bluetooth Core (HCI device and connection manager, scheduler)
HCI Device drivers (interface to the hardware)
L2CAP Module (L2CAP protocol)
SCO Module (SCO links)
RFCOMM Module (RFCOMM protocol)
BNEP Module (BNEP protocol)
Bluetooth Core (HCI device and connection manager, scheduler)
HCI Device drivers (interface to the hardware)
L2CAP Module (L2CAP protocol)
SCO Module (SCO links)
RFCOMM Module (RFCOMM protocol)
BNEP Module (BNEP protocol)
Say Y here to enable Linux Bluetooth support and to build Bluetooth Core
layer.
......
config BT_BNEP
tristate "BNEP protocol support"
depends on BT_L2CAP
---help---
depends on BT && BT_L2CAP
help
BNEP (Bluetooth Network Encapsulation Protocol) is Ethernet
emulation layer on top of Bluetooth. BNEP is required for Bluetooth
PAN (Personal Area Network).
......
config BT_RFCOMM
tristate "RFCOMM protocol support"
depends on BT_L2CAP
depends on BT && BT_L2CAP
help
RFCOMM provides connection oriented stream transport. RFCOMM
support is required for Dialup Networking, OBEX and other Bluetooth
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment