Merge qualcomm.com:/usr/src/bt-2.5 into qualcomm.com:/usr/src/linux-2.5

drivers/bluetooth/Kconfig

 
 menu "Bluetooth device drivers"
-	depends on BT!=n
+	depends on BT
 
 config BT_HCIUSB
 	tristate "HCI USB driver"
@@ -52,11 +52,19 @@ config BT_HCIUART_BCSP
 	help
 	  BCSP (BlueCore Serial Protocol) is serial protocol for communication 
 	  between Bluetooth device and host. This protocol is required for non
-	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and 
+	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
 	  CF cards.
 
 	  Say Y here to compile support for HCI BCSP protocol.
 
+config BT_HCIUART_BCSP_TXCRC
+        bool "Transmit CRC with every BCSP packet"
+        depends on BT_HCIUART_BCSP
+        help
+	  If you say Y here, a 16-bit CRC checksum will be transmitted along with
+	  every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip.
+	  This increases reliability, but slightly reduces efficiency.
+
 config BT_HCIDTL1
 	tristate "HCI DTL1 (PC Card) driver"
 	depends on PCMCIA && BT
@@ -64,8 +72,8 @@ config BT_HCIDTL1
 	  Bluetooth HCI DTL1 (PC Card) driver.
 	  This driver provides support for Bluetooth PCMCIA devices with
 	  Nokia DTL1 interface:
-	  Nokia Bluetooth Card
-	  Socket Bluetooth CF Card
+	     Nokia Bluetooth Card
+	     Socket Bluetooth CF Card
 
 	  Say Y here to compile support for HCI DTL1 devices into the
 	  kernel or say M to compile it as module (dtl1_cs.o).
@@ -73,12 +81,12 @@ config BT_HCIDTL1
 config BT_HCIBT3C
 	tristate "HCI BT3C (PC Card) driver"
 	depends on PCMCIA && BT
-	---help---
+	help
 	  Bluetooth HCI BT3C (PC Card) driver.
 	  This driver provides support for Bluetooth PCMCIA devices with
 	  3Com BT3C interface:
-	  3Com Bluetooth Card (3CRWB6096)
-	  HP Bluetooth Card
+	     3Com Bluetooth Card (3CRWB6096)
+	     HP Bluetooth Card
 
 	  The HCI BT3C driver uses external firmware loader program provided in
 	  the BlueFW package. For more information, see <http://bluez.sf.net>.
@@ -92,9 +100,9 @@ config BT_HCIBLUECARD
 	help
 	  Bluetooth HCI BlueCard (PC Card) driver.
 	  This driver provides support for Bluetooth PCMCIA devices with
-	  Anycom BlueCard interface:
-	  Anycom Bluetooth PC Card
-	  Anycom Bluetooth CF Card
+	     Anycom BlueCard interface:
+	     Anycom Bluetooth PC Card
+	     Anycom Bluetooth CF Card
 
 	  Say Y here to compile support for HCI BlueCard devices into the
 	  kernel or say M to compile it as module (bluecard_cs.o).

net/bluetooth/Kconfig

@@ -7,7 +7,7 @@ menu "Bluetooth support"
 
 config BT
 	tristate "Bluetooth subsystem support"
-	---help---
+	help
 	  Bluetooth is low-cost, low-power, short-range wireless technology.
 	  It was designed as a replacement for cables and other short-range
 	  technologies like IrDA.  Bluetooth operates in personal area range
@@ -15,12 +15,12 @@ config BT
 	  Bluetooth can be found at <http://www.bluetooth.com/>.
 
 	  Linux Bluetooth subsystem consist of several layers:
-	  Bluetooth Core (HCI device and connection manager, scheduler)
-	  HCI Device drivers (interface to the hardware)
-	  L2CAP Module (L2CAP protocol)
-	  SCO Module (SCO links)
-	  RFCOMM Module (RFCOMM protocol)  
-	  BNEP Module (BNEP protocol)
+	     Bluetooth Core (HCI device and connection manager, scheduler)
+	     HCI Device drivers (interface to the hardware)
+	     L2CAP Module (L2CAP protocol)
+	     SCO Module (SCO links)
+	     RFCOMM Module (RFCOMM protocol)  
+	     BNEP Module (BNEP protocol)
 
 	  Say Y here to enable Linux Bluetooth support and to build Bluetooth Core
 	  layer.

net/bluetooth/bnep/Kconfig

 config BT_BNEP
 	tristate "BNEP protocol support"
-	depends on BT_L2CAP
-	---help---
+	depends on BT && BT_L2CAP
+	help
 	  BNEP (Bluetooth Network Encapsulation Protocol) is Ethernet
 	  emulation layer on top of Bluetooth. BNEP is required for Bluetooth
 	  PAN (Personal Area Network).

net/bluetooth/rfcomm/Kconfig

 config BT_RFCOMM
 	tristate "RFCOMM protocol support"
-	depends on BT_L2CAP
+	depends on BT && BT_L2CAP
 	help
 	  RFCOMM provides connection oriented stream transport. RFCOMM
 	  support is required for Dialup Networking, OBEX and other Bluetooth