Commit 6dc30fc2 authored by Linus Torvalds's avatar Linus Torvalds

Merge ppc970.osdl.org:/home/torvalds/v2.5/mips

into ppc970.osdl.org:/home/torvalds/v2.5/linux
parents 05de55a4 1d50e5e7
This diff is collapsed.
This diff is collapsed.
...@@ -16,8 +16,6 @@ ...@@ -16,8 +16,6 @@
#undef DEBUG_CMDLINE #undef DEBUG_CMDLINE
char arcs_cmdline[CL_SIZE];
char * __init prom_getcmdline(void) char * __init prom_getcmdline(void)
{ {
return arcs_cmdline; return arcs_cmdline;
......
...@@ -63,7 +63,7 @@ static struct smatch mach_table[] = { ...@@ -63,7 +63,7 @@ static struct smatch mach_table[] = {
"SNI RM200_PCI", "SNI RM200_PCI",
MACH_GROUP_SNI_RM, MACH_GROUP_SNI_RM,
MACH_SNI_RM200_PCI, MACH_SNI_RM200_PCI,
0 PROM_FLAG_DONT_FREE_TEMP
} }
}; };
......
...@@ -10,6 +10,7 @@ ...@@ -10,6 +10,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/sgialib.h> #include <asm/sgialib.h>
#undef DEBUG_PROM_INIT #undef DEBUG_PROM_INIT
...@@ -19,13 +20,13 @@ struct linux_romvec *romvec; ...@@ -19,13 +20,13 @@ struct linux_romvec *romvec;
int prom_argc; int prom_argc;
LONG *_prom_argv, *_prom_envp; LONG *_prom_argv, *_prom_envp;
void __init prom_init(int argc, char **argv, char **envp, int *prom_vec) void __init prom_init(void)
{ {
PSYSTEM_PARAMETER_BLOCK pb = PROMBLOCK; PSYSTEM_PARAMETER_BLOCK pb = PROMBLOCK;
romvec = ROMVECTOR; romvec = ROMVECTOR;
prom_argc = argc; prom_argc = fw_arg0;
_prom_argv = (LONG *) argv; _prom_argv = (LONG *) fw_arg1;
_prom_envp = (LONG *) envp; _prom_envp = (LONG *) fw_arg2;
if (pb->magic != 0x53435241) { if (pb->magic != 0x53435241) {
prom_printf("Aieee, bad prom vector magic %08lx\n", pb->magic); prom_printf("Aieee, bad prom vector magic %08lx\n", pb->magic);
......
...@@ -26,6 +26,12 @@ ...@@ -26,6 +26,12 @@
#undef DEBUG #undef DEBUG
/*
* For ARC firmware memory functions the unit of meassuring memory is always
* a 4k page of memory
*/
#define ARC_PAGE_SHIFT 12
struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current) struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
{ {
return (struct linux_mdesc *) ARC_CALL1(get_mdesc, Current); return (struct linux_mdesc *) ARC_CALL1(get_mdesc, Current);
...@@ -127,20 +133,23 @@ void __init prom_meminit(void) ...@@ -127,20 +133,23 @@ void __init prom_meminit(void)
unsigned long base, size; unsigned long base, size;
long type; long type;
base = p->base << PAGE_SHIFT; base = p->base << ARC_PAGE_SHIFT;
size = p->pages << PAGE_SHIFT; size = p->pages << ARC_PAGE_SHIFT;
type = prom_memtype_classify(p->type); type = prom_memtype_classify(p->type);
add_memory_region(base, size, type); add_memory_region(base, size, type);
} }
} }
void __init prom_free_prom_memory (void) unsigned long __init prom_free_prom_memory(void)
{ {
unsigned long freed = 0; unsigned long freed = 0;
unsigned long addr; unsigned long addr;
int i; int i;
if (prom_flags & PROM_FLAG_DONT_FREE_TEMP)
return 0;
for (i = 0; i < boot_mem_map.nr_map; i++) { for (i = 0; i < boot_mem_map.nr_map; i++) {
if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
continue; continue;
...@@ -156,4 +165,6 @@ void __init prom_free_prom_memory (void) ...@@ -156,4 +165,6 @@ void __init prom_free_prom_memory (void)
} }
} }
printk(KERN_INFO "Freeing prom memory: %ldkb freed\n", freed >> 10); printk(KERN_INFO "Freeing prom memory: %ldkb freed\n", freed >> 10);
return freed;
} }
...@@ -101,3 +101,8 @@ ArcFlushAllCaches(VOID) ...@@ -101,3 +101,8 @@ ArcFlushAllCaches(VOID)
{ {
ARC_CALL0(cache_flush); ARC_CALL0(cache_flush);
} }
DISPLAY_STATUS * __init ArcGetDisplayStatus(ULONG FileID)
{
return ARC_CALL1(GetDisplayStatus, FileID);
}
...@@ -5,14 +5,11 @@ ...@@ -5,14 +5,11 @@
# #
# Makefile for the Alchemy Au1000 CPU, generic files. # Makefile for the Alchemy Au1000 CPU, generic files.
# #
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
obj-y += prom.o int-handler.o dma.o irq.o puts.o \ obj-y += prom.o int-handler.o dma.o irq.o puts.o \
time.o reset.o clocks.o power.o time.o reset.o clocks.o power.o setup.o \
sleeper.o
obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_RTC) += rtc.o obj-$(CONFIG_PCI) += pci.o
...@@ -28,7 +28,7 @@ ...@@ -28,7 +28,7 @@
*/ */
#include <linux/module.h> #include <linux/module.h>
#include <asm/au1000.h> #include <asm/mach-au1x00/au1000.h>
static unsigned int au1x00_clock; // Hz static unsigned int au1x00_clock; // Hz
static unsigned int lcd_clock; // KHz static unsigned int lcd_clock; // KHz
...@@ -85,8 +85,7 @@ void set_au1x00_lcd_clock(void) ...@@ -85,8 +85,7 @@ void set_au1x00_lcd_clock(void)
lcd_clock = sys_busclk / 4; lcd_clock = sys_busclk / 4;
if (lcd_clock > 50000) /* Epson MAX */ if (lcd_clock > 50000) /* Epson MAX */
printk("%s: warning: LCD clock too high (%d KHz)\n", printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
__FUNCTION__, lcd_clock);
} }
unsigned int get_au1x00_lcd_clock(void) unsigned int get_au1x00_lcd_clock(void)
......
#include <linux/config.h> #include <linux/config.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/au1000.h> #include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_KGDB #ifdef CONFIG_KGDB
......
...@@ -36,12 +36,12 @@ ...@@ -36,12 +36,12 @@
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <asm/au1000.h> #include <linux/interrupt.h>
#include <asm/au1000_dma.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
/* /*
* A note on resource allocation: * A note on resource allocation:
* *
...@@ -95,7 +95,6 @@ static const struct { ...@@ -95,7 +95,6 @@ static const struct {
{I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC}
}; };
int au1000_dma_read_proc(char *buf, char **start, off_t fpos, int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
int length, int *eof, void *data) int length, int *eof, void *data)
{ {
...@@ -152,7 +151,7 @@ void dump_au1000_dma_channel(unsigned int dmanr) ...@@ -152,7 +151,7 @@ void dump_au1000_dma_channel(unsigned int dmanr)
* Requests the DMA done IRQ if irqhandler != NULL. * Requests the DMA done IRQ if irqhandler != NULL.
*/ */
int request_au1000_dma(int dev_id, const char *dev_str, int request_au1000_dma(int dev_id, const char *dev_str,
void (*irqhandler)(int, void *, struct pt_regs *), irqreturn_t (*irqhandler)(int, void *, struct pt_regs *),
unsigned long irqflags, unsigned long irqflags,
void *irq_dev_id) void *irq_dev_id)
{ {
...@@ -198,7 +197,6 @@ int request_au1000_dma(int dev_id, const char *dev_str, ...@@ -198,7 +197,6 @@ int request_au1000_dma(int dev_id, const char *dev_str,
return i; return i;
} }
void free_au1000_dma(unsigned int dmanr) void free_au1000_dma(unsigned int dmanr)
{ {
struct dma_chan *chan = get_dma_chan(dmanr); struct dma_chan *chan = get_dma_chan(dmanr);
...@@ -215,3 +213,4 @@ void free_au1000_dma(unsigned int dmanr) ...@@ -215,3 +213,4 @@ void free_au1000_dma(unsigned int dmanr)
chan->irq_dev = NULL; chan->irq_dev = NULL;
chan->dev_id = -1; chan->dev_id = -1;
} }
#endif // AU1000 AU1500 AU1100
This diff is collapsed.
/*
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 pci support.
*
* Copyright 2001,2002,2003 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* Support for all devices (greater than 16) added by David Gathright.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
//#include <asm/pb1500.h>
#ifdef CONFIG_MIPS_PB1000
#include <asm/mach-pb1x00/pb1000.h>
#endif
#include <asm/pci_channel.h>
/* TBD */
static struct resource pci_io_resource = {
"pci IO space",
(u32)PCI_IO_START,
(u32)PCI_IO_END,
IORESOURCE_IO
};
static struct resource pci_mem_resource = {
"pci memory space",
(u32)PCI_MEM_START,
(u32)PCI_MEM_END,
IORESOURCE_MEM
};
extern struct pci_ops au1x_pci_ops;
static struct pci_controller au1x_controller = {
.pci_ops = &au1x_pci_ops,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
};
#ifdef CONFIG_SOC_AU1500
static unsigned long virt_io_addr;
#endif
static int __init au1x_pci_setup(void)
{
#ifdef CONFIG_SOC_AU1500
int i;
struct pci_dev *dev;
virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
if (!virt_io_addr) {
printk(KERN_ERR "Unable to ioremap pci space\n");
return;
}
#ifdef CONFIG_DMA_NONCOHERENT
/*
* Set the NC bit in controller for pre-AC silicon
*/
au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG);
printk("Non-coherent PCI accesses enabled\n");
#endif
set_io_port_base(virt_io_addr);
#endif
#ifdef CONFIG_MIPS_PB1000 /* This is truly board specific */
unsigned long pci_mem_start = (unsigned long) PCI_MEM_START;
au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
au_writel(0, SDRAM_MBAR); // set mbar to 0
au_writel(0x2, SDRAM_CMD); // enable memory accesses
au_sync_delay(1);
// set extend byte to mbar of ext slot
au_writel(((pci_mem_start >> 24) & 0xff) |
(1 << 8 | 1 << 9 | 1 << 10 | 1 << 27), PCI_BRIDGE_CONFIG);
#endif
register_pci_controller(&au1x_controller);
}
arch_initcall(au1x_pci_setup);
...@@ -39,7 +39,9 @@ ...@@ -39,7 +39,9 @@
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/au1000.h> #include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_PM
#define DEBUG 1 #define DEBUG 1
#ifdef DEBUG #ifdef DEBUG
...@@ -48,13 +50,12 @@ ...@@ -48,13 +50,12 @@
# define DPRINTK(fmt, args...) # define DPRINTK(fmt, args...)
#endif #endif
extern void au1k_wait(void);
static void calibrate_delay(void); static void calibrate_delay(void);
extern void set_au1000_speed(unsigned int new_freq); extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1000_speed(void); extern unsigned int get_au1x00_speed(void);
extern unsigned long get_au1000_uart_baud_base(void); extern unsigned long get_au1x00_uart_baud_base(void);
extern void set_au1000_uart_baud_base(unsigned long new_baud_base); extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
extern unsigned long save_local_and_disable(int controller); extern unsigned long save_local_and_disable(int controller);
extern void restore_local_and_enable(int controller, unsigned long mask); extern void restore_local_and_enable(int controller, unsigned long mask);
extern void local_enable_irq(unsigned int irq_nr); extern void local_enable_irq(unsigned int irq_nr);
...@@ -64,10 +65,144 @@ extern void local_enable_irq(unsigned int irq_nr); ...@@ -64,10 +65,144 @@ extern void local_enable_irq(unsigned int irq_nr);
#define ACPI_S1_SLP_TYP 19 #define ACPI_S1_SLP_TYP 19
#define ACPI_SLEEP 21 #define ACPI_SLEEP 21
#ifdef CONFIG_PM
static spinlock_t pm_lock = SPIN_LOCK_UNLOCKED; static spinlock_t pm_lock = SPIN_LOCK_UNLOCKED;
/* We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
* If reading a register doesn't provide a proper result for a
* later restore, we have to provide a function for loading that
* register and save a copy.
*
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
static uint sleep_aux_pll_cntrl;
static uint sleep_cpu_pll_cntrl;
static uint sleep_pin_function;
static uint sleep_uart0_inten;
static uint sleep_uart0_fifoctl;
static uint sleep_uart0_linectl;
static uint sleep_uart0_clkdiv;
static uint sleep_uart0_enable;
static uint sleep_usbhost_enable;
static uint sleep_usbdev_enable;
static uint sleep_static_memctlr[4][3];
/* Define this to cause the value you write to /proc/sys/pm/sleep to
* set the TOY timer for the amount of time you want to sleep.
* This is done mainly for testing, but may be useful in other cases.
* The value is number of 32KHz ticks to sleep.
*/
#define SLEEP_TEST_TIMEOUT 1
#ifdef SLEEP_TEST_TIMEOUT
static int sleep_ticks;
void wakeup_counter0_set(int ticks);
#endif
static void
save_core_regs(void)
{
extern void save_au1xxx_intctl(void);
extern void pm_eth0_shutdown(void);
/* Do the serial ports.....these really should be a pm_*
* registered function by the driver......but of course the
* standard serial driver doesn't understand our Au1xxx
* unique registers.
*/
sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
/* Shutdown USB host/device.
*/
sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
/* There appears to be some undocumented reset register....
*/
au_writel(0, 0xb0100004); au_sync();
au_writel(0, USB_HOST_CONFIG); au_sync();
sleep_usbdev_enable = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE); au_sync();
/* Save interrupt controller state.
*/
save_au1xxx_intctl();
/* Clocks and PLLs.
*/
sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
/* We don't really need to do this one, but unless we
* write it again it won't have a valid value if we
* happen to read it.
*/
sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);
sleep_pin_function = au_readl(SYS_PINFUNC);
/* Save the static memory controller configuration.
*/
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1);
sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1);
sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1);
sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2);
sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2);
sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2);
sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
}
static void
restore_core_regs(void)
{
extern void restore_au1xxx_intctl(void);
extern void wakeup_counter0_adjust(void);
au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
/* Restore the static memory controller configuration.
*/
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
au_writel(sleep_static_memctlr[1][0], MEM_STCFG1);
au_writel(sleep_static_memctlr[1][1], MEM_STTIME1);
au_writel(sleep_static_memctlr[1][2], MEM_STADDR1);
au_writel(sleep_static_memctlr[2][0], MEM_STCFG2);
au_writel(sleep_static_memctlr[2][1], MEM_STTIME2);
au_writel(sleep_static_memctlr[2][2], MEM_STADDR2);
au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
/* Enable the UART if it was enabled before sleep.
* I guess I should define module control bits........
*/
if (sleep_uart0_enable & 0x02) {
au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
}
restore_au1xxx_intctl();
wakeup_counter0_adjust();
}
unsigned long suspend_mode; unsigned long suspend_mode;
void wakeup_from_suspend(void) void wakeup_from_suspend(void)
...@@ -78,33 +213,48 @@ void wakeup_from_suspend(void) ...@@ -78,33 +213,48 @@ void wakeup_from_suspend(void)
int au_sleep(void) int au_sleep(void)
{ {
unsigned long wakeup, flags; unsigned long wakeup, flags;
extern void save_and_sleep(void);
spin_lock_irqsave(&pm_lock,flags); spin_lock_irqsave(&pm_lock,flags);
save_core_regs();
flush_cache_all(); flush_cache_all();
/* pin 6 is gpio */
/** The code below is all system dependent and we should probably
** have a function call out of here to set this up. You need
** to configure the GPIO or timer interrupts that will bring
** you out of sleep.
** For testing, the TOY counter wakeup is useful.
**/
#if 0
au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
/* gpio 6 can cause a wake up event */ /* gpio 6 can cause a wake up event */
wakeup = au_readl(SYS_WAKEMSK); wakeup = au_readl(SYS_WAKEMSK);
wakeup &= ~(1 << 8); /* turn off match20 wakeup */ wakeup &= ~(1 << 8); /* turn off match20 wakeup */
wakeup |= 1 << 6; /* turn on gpio 6 wakeup */ wakeup |= 1 << 6; /* turn on gpio 6 wakeup */
au_writel(wakeup, SYS_WAKEMSK); #else
/* For testing, allow match20 to wake us up.
*/
#ifdef SLEEP_TEST_TIMEOUT
wakeup_counter0_set(sleep_ticks);
#endif
wakeup = 1 << 8; /* turn on match20 wakeup */
wakeup = 0;
#endif
au_writel(1, SYS_WAKESRC); /* clear cause */ au_writel(1, SYS_WAKESRC); /* clear cause */
au_writel(1, SYS_SLPPWR); /* prepare to sleep */ au_sync();
au_writel(wakeup, SYS_WAKEMSK);
au_sync();
__asm__("la $4, 1f\n\t" save_and_sleep();
"lui $5, 0xb190\n\t"
"ori $5, 0x18\n\t"
"sw $4, 0($5)\n\t"
"li $4, 1\n\t"
"lui $5, 0xb190\n\t"
"ori $5, 0x7c\n\t"
"sw $4, 0($5)\n\t" "sync\n\t" "1:\t\n\t" "nop\n\t");
/* after a wakeup, the cpu vectors back to 0x1fc00000 so /* after a wakeup, the cpu vectors back to 0x1fc00000 so
* it's up to the boot code to get us back here. * it's up to the boot code to get us back here.
*/ */
restore_core_regs();
spin_unlock_irqrestore(&pm_lock, flags); spin_unlock_irqrestore(&pm_lock, flags);
return 0; return 0;
} }
...@@ -113,11 +263,27 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file, ...@@ -113,11 +263,27 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
void *buffer, size_t * len) void *buffer, size_t * len)
{ {
int retval = 0; int retval = 0;
#ifdef SLEEP_TEST_TIMEOUT
#define TMPBUFLEN2 16
char buf[TMPBUFLEN2], *p;
#endif
if (!write) { if (!write) {
*len = 0; *len = 0;
} else { } else {
#ifdef SLEEP_TEST_TIMEOUT
if (*len > TMPBUFLEN2 - 1) {
return -EFAULT;
}
if (copy_from_user(buf, buffer, *len)) {
return -EFAULT;
}
buf[*len] = 0;
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
#endif
retval = pm_send_all(PM_SUSPEND, (void *) 2); retval = pm_send_all(PM_SUSPEND, (void *) 2);
if (retval) if (retval)
return retval; return retval;
...@@ -131,6 +297,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file, ...@@ -131,6 +297,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
void *buffer, size_t * len) void *buffer, size_t * len)
{ {
int retval = 0; int retval = 0;
void au1k_wait(void);
if (!write) { if (!write) {
*len = 0; *len = 0;
...@@ -187,13 +354,13 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, ...@@ -187,13 +354,13 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
return -EFAULT; return -EFAULT;
} }
old_baud_base = get_au1000_uart_baud_base(); old_baud_base = get_au1x00_uart_baud_base();
old_cpu_freq = get_au1000_speed(); old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000; new_cpu_freq = pll * 12 * 1000000;
new_baud_base = (new_cpu_freq / 4) / 16; new_baud_base = (new_cpu_freq / 4) / 16;
set_au1000_speed(new_cpu_freq); set_au1x00_speed(new_cpu_freq);
set_au1000_uart_baud_base(new_baud_base); set_au1x00_uart_baud_base(new_baud_base);
old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
new_refresh = new_refresh =
...@@ -323,10 +490,4 @@ static void calibrate_delay(void) ...@@ -323,10 +490,4 @@ static void calibrate_delay(void)
loops_per_jiffy &= ~loopbit; loops_per_jiffy &= ~loopbit;
} }
} }
void au1k_wait(void)
{
__asm__("nop\n\t" "nop\n\t");
}
#endif /* CONFIG_PM */ #endif /* CONFIG_PM */
...@@ -44,7 +44,6 @@ ...@@ -44,7 +44,6 @@
/* #define DEBUG_CMDLINE */ /* #define DEBUG_CMDLINE */
char arcs_cmdline[CL_SIZE];
extern int prom_argc; extern int prom_argc;
extern char **prom_argv, **prom_envp; extern char **prom_argv, **prom_envp;
...@@ -153,6 +152,11 @@ int get_ethernet_addr(char *ethernet_addr) ...@@ -153,6 +152,11 @@ int get_ethernet_addr(char *ethernet_addr)
return 0; return 0;
} }
void prom_free_prom_memory (void) {} unsigned long __init prom_free_prom_memory(void)
{
return 0;
}
EXPORT_SYMBOL(prom_getcmdline); EXPORT_SYMBOL(prom_getcmdline);
EXPORT_SYMBOL(get_ethernet_addr); EXPORT_SYMBOL(get_ethernet_addr);
EXPORT_SYMBOL(str2eaddr);
...@@ -29,7 +29,7 @@ ...@@ -29,7 +29,7 @@
*/ */
#include <linux/types.h> #include <linux/types.h>
#include <asm/au1000.h> #include <asm/mach-au1x00/au1000.h>
#define SERIAL_BASE UART_BASE #define SERIAL_BASE UART_BASE
#define SER_CMD 0x7 #define SER_CMD 0x7
...@@ -40,11 +40,11 @@ ...@@ -40,11 +40,11 @@
#define SLOW_DOWN #define SLOW_DOWN
static const char digits[16] = "0123456789abcdef"; static const char digits[16] = "0123456789abcdef";
static volatile unsigned long * const com1 = (unsigned char *)SERIAL_BASE; static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
#ifdef SLOW_DOWN #ifdef SLOW_DOWN
static inline void slow_down() static inline void slow_down(void)
{ {
int k; int k;
for (k=0; k<10000; k++); for (k=0; k<10000; k++);
......
...@@ -35,9 +35,10 @@ ...@@ -35,9 +35,10 @@
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/reboot.h> #include <asm/reboot.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/au1000.h> #include <asm/mach-au1x00/au1000.h>
extern int au_sleep(void); extern int au_sleep(void);
extern void (*flush_cache_all)(void);
void au1000_restart(char *command) void au1000_restart(char *command)
{ {
...@@ -54,6 +55,10 @@ void au1000_restart(char *command) ...@@ -54,6 +55,10 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb017fffc); /* usbh_enable */ au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */ au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb0300040); /* ir_enable */ au_writel(0x00, 0xb0300040); /* ir_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb0520000); /* macen0 */ au_writel(0x00, 0xb0520000); /* macen0 */
au_writel(0x00, 0xb0520004); /* macen1 */ au_writel(0x00, 0xb0520004); /* macen1 */
au_writel(0x00, 0xb1000008); /* i2s_enable */ au_writel(0x00, 0xb1000008); /* i2s_enable */
...@@ -66,6 +71,8 @@ void au1000_restart(char *command) ...@@ -66,6 +71,8 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */ au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */ au_writel(0x00, 0xb1900100); /* sys_pininputen */
break; break;
case 0x01000000: /* Au1500 */ case 0x01000000: /* Au1500 */
...@@ -74,6 +81,10 @@ void au1000_restart(char *command) ...@@ -74,6 +81,10 @@ void au1000_restart(char *command)
asm("sync"); asm("sync");
au_writel(0x00, 0xb017fffc); /* usbh_enable */ au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */ au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb1520000); /* macen0 */ au_writel(0x00, 0xb1520000); /* macen0 */
au_writel(0x00, 0xb1520004); /* macen1 */ au_writel(0x00, 0xb1520004); /* macen1 */
au_writel(0x00, 0xb1100100); /* uart0_enable */ au_writel(0x00, 0xb1100100); /* uart0_enable */
...@@ -81,6 +92,8 @@ void au1000_restart(char *command) ...@@ -81,6 +92,8 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */ au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */ au_writel(0x00, 0xb1900100); /* sys_pininputen */
break; break;
case 0x02000000: /* Au1100 */ case 0x02000000: /* Au1100 */
...@@ -90,6 +103,10 @@ void au1000_restart(char *command) ...@@ -90,6 +103,10 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb017fffc); /* usbh_enable */ au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */ au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb0300040); /* ir_enable */ au_writel(0x00, 0xb0300040); /* ir_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb0520000); /* macen0 */ au_writel(0x00, 0xb0520000); /* macen0 */
au_writel(0x00, 0xb1000008); /* i2s_enable */ au_writel(0x00, 0xb1000008); /* i2s_enable */
au_writel(0x00, 0xb1100100); /* uart0_enable */ au_writel(0x00, 0xb1100100); /* uart0_enable */
...@@ -100,6 +117,8 @@ void au1000_restart(char *command) ...@@ -100,6 +117,8 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */ au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */ au_writel(0x00, 0xb1900100); /* sys_pininputen */
break; break;
......
/* /*
*
* BRIEF MODULE DESCRIPTION
* Alchemy Db1000 board setup.
*
* Copyright 2000 MontaVista Software Inc. * Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc. * Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com * ppopov@mvista.com or source@mvista.com
...@@ -32,55 +28,53 @@ ...@@ -32,55 +28,53 @@
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/interrupt.h>
#include <asm/cpu.h> #include <asm/cpu.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/mipsregs.h> #include <asm/mipsregs.h>
#include <asm/reboot.h> #include <asm/reboot.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/au1000.h> #include <asm/mach-au1x00/au1000.h>
#include <asm/db1x00.h> #include <asm/time.h>
#ifdef CONFIG_BLK_DEV_INITRD #ifdef CONFIG_BLK_DEV_INITRD
extern unsigned long initrd_start, initrd_end; extern unsigned long initrd_start, initrd_end;
extern void * __rd_start, * __rd_end; extern void * __rd_start, * __rd_end;
#endif #endif
#ifdef CONFIG_BLK_DEV_IDE
extern struct ide_ops std_ide_ops;
extern struct ide_ops *ide_ops;
#endif
extern struct rtc_ops no_rtc_ops;
extern char * __init prom_getcmdline(void); extern char * __init prom_getcmdline(void);
extern void __init board_setup(void);
extern void au1000_restart(char *); extern void au1000_restart(char *);
extern void au1000_halt(void); extern void au1000_halt(void);
extern void au1000_power_off(void); extern void au1000_power_off(void);
extern struct resource ioport_resource; extern struct resource ioport_resource;
extern struct resource iomem_resource; extern struct resource iomem_resource;
extern void (*board_time_init)(void);
extern void au1x_time_init(void);
extern void (*board_timer_setup)(struct irqaction *irq);
extern void au1x_timer_setup(struct irqaction *irq);
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500) #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
extern phys_t (*fixup_bigphys_addr)(phys_t phys_addr, phys_t size); extern phys_t (*fixup_bigphys_addr)(phys_t phys_addr, phys_t size);
static phys_t db_fixup_bigphys_addr(phys_t phys_addr, phys_t size); static phys_t au1500_fixup_bigphys_addr(phys_t phys_addr, phys_t size);
#endif #endif
extern void au1xxx_time_init(void);
extern void au1xxx_timer_setup(struct irqaction *irq);
void __init au1x00_setup(void) static int __init au1x00_setup(void)
{ {
char *argptr; char *argptr;
u32 pin_func, static_cfg0;
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
argptr = prom_getcmdline();
/* Various early Au1000 Errata corrected by this */ /* Various early Au1000 Errata corrected by this */
set_c0_config(1<<19); /* Config[OD] */ set_c0_config(1<<19); /* Config[OD] */
#ifdef CONFIG_AU1X00_SERIAL_CONSOLE board_setup(); /* board specific setup */
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
if ((argptr = strstr(argptr, "console=")) == NULL) { if ((argptr = strstr(argptr, "console=")) == NULL) {
argptr = prom_getcmdline(); argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200"); strcat(argptr, " console=ttyS0,115200");
...@@ -91,36 +85,53 @@ void __init au1x00_setup(void) ...@@ -91,36 +85,53 @@ void __init au1x00_setup(void)
if ((argptr = strstr(argptr, "video=")) == NULL) { if ((argptr = strstr(argptr, "video=")) == NULL) {
argptr = prom_getcmdline(); argptr = prom_getcmdline();
/* default panel */ /* default panel */
//strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16"); /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
#ifdef CONFIG_MIPS_HYDROGEN3
strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
#else
strcat(argptr, " video=au1100fb:panel:s10,nohwcursor"); strcat(argptr, " video=au1100fb:panel:s10,nohwcursor");
#endif
} }
#endif #endif
#ifdef CONFIG_FB_E1356
if ((argptr = strstr(argptr, "video=")) == NULL) {
argptr = prom_getcmdline();
#ifdef CONFIG_MIPS_PB1000
strcat(argptr, " video=e1356fb:system:pb1000,mmunalign:1");
#else
strcat(argptr, " video=e1356fb:system:pb1500");
#endif
}
#endif
#ifdef CONFIG_FB_XPERT98
if ((argptr = strstr(argptr, "video=")) == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " video=atyfb:1024x768-8@70");
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) #if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
// au1000 does not support vra, au1500 and au1100 do /* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra"); strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline(); argptr = prom_getcmdline();
#endif #endif
rtc_ops = &no_rtc_ops;
_machine_restart = au1000_restart; _machine_restart = au1000_restart;
_machine_halt = au1000_halt; _machine_halt = au1000_halt;
_machine_power_off = au1000_power_off; _machine_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
board_timer_setup = au1xxx_timer_setup;
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500) #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
fixup_bigphys_addr = db_fixup_bigphys_addr; fixup_bigphys_addr = au1500_fixup_bigphys_addr;
#endif #endif
// IO/MEM resources. /* IO/MEM resources. */
set_io_port_base(0); set_io_port_base(0);
#ifdef CONFIG_SOC_AU1500 ioport_resource.start = IOPORT_RESOURCE_START;
ioport_resource.start = 0x00000000; ioport_resource.end = IOPORT_RESOURCE_END;
#else iomem_resource.start = IOMEM_RESOURCE_START;
/* don't allow any legacy ports probing */ iomem_resource.end = IOMEM_RESOURCE_END;
ioport_resource.start = 0x10000000;
#endif
ioport_resource.end = 0xffffffff;
iomem_resource.start = 0x10000000;
iomem_resource.end = 0xffffffff;
#ifdef CONFIG_BLK_DEV_INITRD #ifdef CONFIG_BLK_DEV_INITRD
ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
...@@ -128,14 +139,6 @@ void __init au1x00_setup(void) ...@@ -128,14 +139,6 @@ void __init au1x00_setup(void)
initrd_end = (unsigned long)&__rd_end; initrd_end = (unsigned long)&__rd_end;
#endif #endif
//
// NOTE:
//
// YAMON (specifically reset_db1500.s) enables 32khz osc
// YAMON (specifically reset_db1x00.s) setups all clocking and GPIOs
// YAMON (specifically reset_db1500.s) setups all PCI
//
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) #if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_USB_OHCI #ifdef CONFIG_USB_OHCI
if ((argptr = strstr(argptr, "usb_ohci=")) == NULL) { if ((argptr = strstr(argptr, "usb_ohci=")) == NULL) {
...@@ -149,69 +152,30 @@ void __init au1x00_setup(void) ...@@ -149,69 +152,30 @@ void __init au1x00_setup(void)
#endif #endif
#ifdef CONFIG_USB_OHCI #ifdef CONFIG_USB_OHCI
// enable host controller and wait for reset done /* enable host controller and wait for reset done */
au_writel(0x08, USB_HOST_CONFIG); au_writel(0x08, USB_HOST_CONFIG);
udelay(1000); udelay(1000);
au_writel(0x0E, USB_HOST_CONFIG); au_writel(0x0E, USB_HOST_CONFIG);
udelay(1000); udelay(1000);
au_readl(USB_HOST_CONFIG); // throw away first read au_readl(USB_HOST_CONFIG); /* throw away first read */
while (!(au_readl(USB_HOST_CONFIG) & 0x10)) while (!(au_readl(USB_HOST_CONFIG) & 0x10))
au_readl(USB_HOST_CONFIG); au_readl(USB_HOST_CONFIG);
#endif #endif
#endif /* defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) */
#ifdef CONFIG_AU1X00_USB_DEVICE while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
// 2nd USB port is USB device au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); au_sync();
au_writel(pin_func, SYS_PINFUNC); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
#endif au_writel(0, SYS_TOYTRIM);
return 0;
#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_FB
// Needed if PCI video card in use
conswitchp = &dummy_con;
#endif
#ifndef CONFIG_SERIAL_NONSTANDARD
/* don't touch the default serial console */
au_writel(0, UART_ADDR + UART_CLK);
#endif
//au_writel(0, UART3_ADDR + UART_CLK);
#ifdef CONFIG_BLK_DEV_IDE
ide_ops = &std_ide_ops;
#endif
#if 0
//// FIX!!! must be valid for au1000, au1500 and au1100
/* Enable Au1000 BCLK switching */
switch (prid & 0x000000FF)
{
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
break;
default: /* HC and newer */
au_writel(0x00000060, 0xb190003c);
break;
}
#endif
au_writel(0, 0xAE000010); /* turn off pcmcia power */
#ifdef CONFIG_MIPS_DB1000
printk("AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
printk("AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
printk("AMD Alchemy Au1100/Db1100 Board\n");
#endif
} }
early_initcall(au1x00_setup);
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500) #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
static phys_t db_fixup_bigphys_addr(phys_t phys_addr, phys_t size) /* This routine should be valid for all Au1500 based boards */
static phys_t au1500_fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{ {
u32 pci_start = (u32)Au1500_PCI_MEM_START; u32 pci_start = (u32)Au1500_PCI_MEM_START;
u32 pci_end = (u32)Au1500_PCI_MEM_END; u32 pci_end = (u32)Au1500_PCI_MEM_END;
......
/*
* Copyright 2002 Embedded Edge, LLC
* Author: dan@embeddededge.com
*
* Sleep helper for Au1xxx sleep mode.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
.text
.set macro
.set noat
.align 5
/* Save all of the processor general registers and go to sleep.
* A wakeup condition will get us back here to restore the registers.
*/
LEAF(save_and_sleep)
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
sw $3, PT_R3(sp)
sw $4, PT_R4(sp)
sw $5, PT_R5(sp)
sw $6, PT_R6(sp)
sw $7, PT_R7(sp)
sw $8, PT_R8(sp)
sw $9, PT_R9(sp)
sw $10, PT_R10(sp)
sw $11, PT_R11(sp)
sw $12, PT_R12(sp)
sw $13, PT_R13(sp)
sw $14, PT_R14(sp)
sw $15, PT_R15(sp)
sw $16, PT_R16(sp)
sw $17, PT_R17(sp)
sw $18, PT_R18(sp)
sw $19, PT_R19(sp)
sw $20, PT_R20(sp)
sw $21, PT_R21(sp)
sw $22, PT_R22(sp)
sw $23, PT_R23(sp)
sw $24, PT_R24(sp)
sw $25, PT_R25(sp)
sw $26, PT_R26(sp)
sw $27, PT_R27(sp)
sw $28, PT_R28(sp)
sw $29, PT_R29(sp)
sw $30, PT_R30(sp)
sw $31, PT_R31(sp)
mfc0 k0, CP0_STATUS
sw k0, 0x20(sp)
mfc0 k0, CP0_CONTEXT
sw k0, 0x1c(sp)
mfc0 k0, CP0_PAGEMASK
sw k0, 0x18(sp)
mfc0 k0, CP0_CONFIG
sw k0, 0x14(sp)
/* Now set up the scratch registers so the boot rom will
* return to this point upon wakeup.
*/
la k0, 1f
lui k1, 0xb190
ori k1, 0x18
sw sp, 0(k1)
ori k1, 0x1c
sw k0, 0(k1)
/* Put SDRAM into self refresh. Preload instructions into cache,
* issue a precharge, then auto refresh, then sleep commands to it.
*/
la t0, sdsleep
.set mips3
cache 0x14, 0(t0)
cache 0x14, 32(t0)
cache 0x14, 64(t0)
cache 0x14, 96(t0)
.set mips0
sdsleep:
lui k0, 0xb400
sw zero, 0x001c(k0) /* Precharge */
sw zero, 0x0020(k0) /* Auto refresh */
sw zero, 0x0030(k0) /* SDRAM sleep */
sync
lui k1, 0xb190
sw zero, 0x0078(k1) /* get ready to sleep */
sync
sw zero, 0x007c(k1) /* Put processor to sleep */
sync
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
1: nop
lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
lw k0, 0x18(sp)
mtc0 k0, CP0_PAGEMASK
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
lw $4, PT_R4(sp)
lw $5, PT_R5(sp)
lw $6, PT_R6(sp)
lw $7, PT_R7(sp)
lw $8, PT_R8(sp)
lw $9, PT_R9(sp)
lw $10, PT_R10(sp)
lw $11, PT_R11(sp)
lw $12, PT_R12(sp)
lw $13, PT_R13(sp)
lw $14, PT_R14(sp)
lw $15, PT_R15(sp)
lw $16, PT_R16(sp)
lw $17, PT_R17(sp)
lw $18, PT_R18(sp)
lw $19, PT_R19(sp)
lw $20, PT_R20(sp)
lw $21, PT_R21(sp)
lw $22, PT_R22(sp)
lw $23, PT_R23(sp)
lw $24, PT_R24(sp)
lw $25, PT_R25(sp)
lw $26, PT_R26(sp)
lw $27, PT_R27(sp)
lw $28, PT_R28(sp)
lw $29, PT_R29(sp)
lw $30, PT_R30(sp)
lw $31, PT_R31(sp)
addiu sp, PT_SIZE
jr ra
END(save_and_sleep)
This diff is collapsed.
...@@ -26,8 +26,6 @@ ...@@ -26,8 +26,6 @@
* with this program; if not, write to the Free Software Foundation, Inc., * with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA. * 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include <linux/config.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/sched.h> #include <linux/sched.h>
......
#
# Copyright 2002 Cogent Computer Systems
# dan@embeddededge.com
#
# Makefile for the Cogent CSB250 Au1500 board. Copied from Pb1500.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
USE_STANDARD_AS_RULE := true
O_TARGET := csb250.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
/*
*
* BRIEF MODULE DESCRIPTION
* Cogent CSB250 board setup.
*
* Copyright 2002 Cogent Computer Systems, Inc.
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/csb250.h>
#ifdef CONFIG_USB_OHCI
// Enable the workaround for the OHCI DoneHead
// register corruption problem.
#define CONFIG_AU1000_OHCI_FIX
#endif
#ifdef CONFIG_RTC
extern struct rtc_ops csb250_rtc_ops;
#endif
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int csb250_pci_idsel(unsigned int devsel, int assert);
void __init board_setup(void)
{
u32 pin_func, pin_val;
u32 sys_freqctrl, sys_clksrc;
// set AUX clock to 12MHz * 8 = 96 MHz
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
/* zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0;
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0;
// FREQ2 = aux/2 = 48 MHz
sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
#ifdef CONFIG_USB_OHCI
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
#ifdef CONFIG_AU1X00_USB_DEVICE
sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
#endif
au_writel(sys_clksrc, SYS_CLKSRC);
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
#ifndef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB host
pin_func |= 0x8000;
#endif
au_writel(pin_func, SYS_PINFUNC);
#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
/* Configure GPIO2....it's used by PCI among other things.
*/
/* Make everything but GP200 (PCI RST) an input until we get
* the pins set correctly.
*/
au_writel(0x00000001, GPIO2_DIR);
/* Set the pins used for output.
* A zero bit will leave PCI reset, LEDs off, power up USB,
* IDSEL disabled.
*/
pin_val = ((3 << 30) | (7 << 19) | (1 << 17) | (1 << 16));
au_writel(pin_val, GPIO2_OUTPUT);
/* Set the output direction.
*/
pin_val = ((3 << 14) | (7 << 3) | (1 << 1) | (1 << 0));
au_writel(pin_val, GPIO2_DIR);
#ifdef CONFIG_PCI
/* Use FREQ1 for the PCI output clock. We use the
* CPU clock of 384 MHz divided by 12 to get 32 MHz PCI.
* If Michael changes the CPU speed, we need to adjust
* that here as well :-).
*/
/* zero and disable FREQ1
*/
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0x000ffc00;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable PCI clock
*/
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x000f8000;
au_writel(sys_clksrc, SYS_CLKSRC);
/* Get current values (which really should match above).
*/
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0x000ffc00;
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x000f8000;
/* FREQ1 = cpu/12 = 32 MHz
*/
sys_freqctrl |= ((5<<12) | (1<<11) | (0<<10));
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* Just connect the clock without further dividing.
*/
sys_clksrc |= ((3<<17) | (0<<16) | (0<<15));
au_writel(sys_clksrc, SYS_CLKSRC);
udelay(1);
/* Now that clocks should be running, take PCI out of reset.
*/
pin_val = au_readl(GPIO2_OUTPUT);
pin_val |= ((1 << 16) | 1);
au_writel(pin_val, GPIO2_OUTPUT);
// Setup PCI bus controller
au_writel(0, Au1500_PCI_CMEM);
au_writel(0x00003fff, Au1500_CFG_BASE);
/* We run big endian without any of the software byte swapping,
* so configure the PCI bridge to help us out.
*/
au_writel(0xf | (2<<6) | (1<<5) | (1<<4), Au1500_PCI_CFG);
au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
au_writel(0x02a00356, Au1500_PCI_STATCMD);
au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
au_writel(0x00000008, Au1500_PCI_MBAR);
au_sync();
board_pci_idsel = csb250_pci_idsel;
#endif
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
#ifdef CONFIG_RTC
rtc_ops = &csb250_rtc_ops;
// Enable the RTC if not already enabled
if (!(au_readl(0xac000028) & 0x20)) {
printk("enabling clock ...\n");
au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
}
// Put the clock in BCD mode
if (readl(0xac00002C) & 0x4) { /* reg B */
au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
au_sync();
}
#endif
}
/* The IDSEL is selected in the GPIO2 register. We will make device
* 12 appear in slot 0 and device 13 appear in slot 1.
*/
int
csb250_pci_idsel(unsigned int devsel, int assert)
{
int retval;
unsigned int gpio2_pins;
retval = 1;
/* First, disable both selects, then assert the one requested.
*/
au_writel(0xc000c000, GPIO2_OUTPUT);
au_sync();
if (assert) {
if (devsel == 12)
gpio2_pins = 0x40000000;
else if (devsel == 13)
gpio2_pins = 0x80000000;
else {
gpio2_pins = 0xc000c000;
retval = 0;
}
au_writel(gpio2_pins, GPIO2_OUTPUT);
}
au_sync();
return retval;
}
/*
*
* BRIEF MODULE DESCRIPTION
* Cogent CSB250 board setup
*
* Copyright 2002 Cogent Computer Systems, Inc.
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
extern char *prom_getenv(char *envname);
/* When we get initrd working someday.........
*/
int my_initrd_start, my_initrd_size;
/* Start arguments and environment.
*/
static char *csb_env[2];
static char *csb_arg[4];
static char *arg1 = "console=ttyS3,38400";
static char *arg2 = "root=/dev/nfs rw ip=any";
static char *env1 = "ethaddr=00:30:23:50:00:00";
const char *get_system_type(void)
{
return "Cogent CSB250";
}
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
{
unsigned char *memsize_str;
unsigned long memsize;
/* We use a0 and a1 to pass initrd start and size.
*/
if (((uint) argc > 0) && ((uint)argv > 0)) {
my_initrd_start = (uint)argc;
my_initrd_size = (uint)argv;
}
/* First argv is ignored.
*/
prom_argc = 3;
prom_argv = csb_arg;
prom_envp = csb_env;
csb_arg[1] = arg1;
csb_arg[2] = arg2;
csb_env[0] = env1;
mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_CSB250;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
memsize = 0x02000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
return 0;
}
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <asm/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
...@@ -3,18 +3,6 @@ ...@@ -3,18 +3,6 @@
# Author: MontaVista Software, Inc. # Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com # ppopov@mvista.com or source@mvista.com
# #
# Makefile for the Alchemy Semiconductor PB1000 board. # Makefile for the Alchemy Semiconductor Db1x00 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
.S.s:
$(CPP) $(CFLAGS) $< -o $*.s
.S.o:
$(CC) $(CFLAGS) -c $< -o $*.o
O_TARGET := db1x00.o
obj-y := init.o setup.o lib-y := init.o board_setup.o irqmap.o
/*
*
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
static BCSR * const bcsr = (BCSR *)0xAE000000;
void __init board_setup(void)
{
u32 pin_func;
pin_func = 0;
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
au_writel(pin_func, SYS_PINFUNC);
#endif
#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
/* set IRFIRSEL instead of GPIO15 */
pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
au_writel(pin_func, SYS_PINFUNC);
/* power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
au_writel(0, 0xAE000010); /* turn off pcmcia power */
#ifdef CONFIG_MIPS_DB1000
printk("AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
printk("AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
printk("AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
printk("AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
printk("AMD Alchemy Mirage Board\n");
#endif
}
/* /*
*
* BRIEF MODULE DESCRIPTION * BRIEF MODULE DESCRIPTION
* PB1000 board setup * PB1000 board setup
* *
...@@ -37,7 +36,6 @@ ...@@ -37,7 +36,6 @@
#include <linux/config.h> #include <linux/config.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc; int prom_argc;
char **prom_argv, **prom_envp; char **prom_argv, **prom_envp;
...@@ -46,28 +44,31 @@ extern char *prom_getenv(char *envname); ...@@ -46,28 +44,31 @@ extern char *prom_getenv(char *envname);
const char *get_system_type(void) const char *get_system_type(void)
{ {
return "Alchemy Db1000"; #ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
#else
return "Alchemy Db1x00";
#endif
} }
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) void __init prom_init(void)
{ {
unsigned char *memsize_str; unsigned char *memsize_str;
unsigned long memsize; unsigned long memsize;
prom_argc = argc; prom_argc = fw_arg0;
prom_argv = argv; prom_argv = (char **) fw_arg1;
prom_envp = envp; prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY; mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_DB1000; /* set the platform # */ mips_machtype = MACH_DB1000; /* set the platform # */
prom_init_cmdline(); prom_init_cmdline();
memsize_str = prom_getenv("memsize"); memsize_str = prom_getenv("memsize");
if (!memsize_str) { if (!memsize_str)
memsize = 0x04000000; memsize = 0x04000000;
} else { else
memsize = simple_strtol(memsize_str, NULL, 0); memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM); add_memory_region(0, memsize, BOOT_MEM_RAM);
return 0;
} }
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <asm/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_MIRAGE)
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#endif
#ifndef CONFIG_MIPS_MIRAGE
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
#endif
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
#ifdef CONFIG_SOC_AU1500
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
#endif
#ifdef CONFIG_MIPS_DB1500
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
#endif
#ifndef CONFIG_MIPS_MIRAGE
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 Fully_Interted#
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG#
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 Fully_Interted#
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 STSCHG#
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
#endif
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
#
# Copyright 2000 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
#
# Makefile for the Alchemy Semiconductor PB1000 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
.S.s:
$(CPP) $(CFLAGS) $< -o $*.s
.S.o:
$(CC) $(CFLAGS) -c $< -o $*.o
O_TARGET := hydrogen3.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
/*
*
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/db1x00.h>
extern struct rtc_ops no_rtc_ops;
void __init board_setup(void)
{
u32 pin_func;
rtc_ops = &no_rtc_ops;
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
au_writel(pin_func, SYS_PINFUNC);
#endif
#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
/* set IRFIRSEL instead of GPIO15 */
pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
au_writel(pin_func, SYS_PINFUNC);
au_sync();
#endif
printk("AMD Alchemy Hydrogen3 Board\n");
}
/*
*
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
#ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
#else
return "Alchemy Db1x00";
#endif
}
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = argc;
prom_argv = argv;
prom_envp = envp;
mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_DB1000; /* set the platform # */
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
memsize = 0x04000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
return 0;
}
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <asm/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
// { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
#
# Copyright 2003 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
# Bruno Randolf <bruno.randolf@4g-systems.biz>
#
# Makefile for 4G Systems MTX-1 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
lib-y := init.o board_setup.o irqmap.o
/*
*
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup.
*
* Copyright 2003 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
extern struct rtc_ops no_rtc_ops;
void __init board_setup(void)
{
rtc_ops = &no_rtc_ops;
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
au_writel(au_readl(SYS_PINFUNC) & (u32)(~0x8000), SYS_PINFUNC);
#endif
// enable USB power switch
au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
au_writel( 0x100000, GPIO2_OUTPUT );
#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1000_USB_DEVICE)
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
#endif
// initialize sys_pinfunc:
// disable second ethernet port (SYS_PF_NI2)
// set U3/GPIO23 to GPIO23 (SYS_PF_U3)
au_writel( SYS_PF_NI2 | SYS_PF_U3, SYS_PINFUNC );
// initialize GPIO
au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
// enable LED and set it to green
au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
au_writel( 0x18000800, GPIO2_OUTPUT );
printk("4G Systems MTX-1 Board\n");
}
/*
*
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup
*
* Copyright 2003 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
return "MTX-1";
}
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = argc;
prom_argv = argv;
prom_envp = envp;
mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_MTX1; /* set the platform # */
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
memsize = 0x04000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
return 0;
}
This diff is collapsed.
...@@ -4,14 +4,5 @@ ...@@ -4,14 +4,5 @@
# ppopov@mvista.com or source@mvista.com # ppopov@mvista.com or source@mvista.com
# #
# Makefile for the Alchemy Semiconductor PB1000 board. # Makefile for the Alchemy Semiconductor PB1000 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
USE_STANDARD_AS_RULE := true
O_TARGET := pb1000.o
obj-y := init.o setup.o lib-y := init.o board_setup.o irqmap.o
/* /*
*
* BRIEF MODULE DESCRIPTION * BRIEF MODULE DESCRIPTION
* PB1000 board setup * PB1000 board setup
* *
...@@ -35,7 +34,6 @@ ...@@ -35,7 +34,6 @@
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc; int prom_argc;
char **prom_argv, **prom_envp; char **prom_argv, **prom_envp;
...@@ -47,14 +45,14 @@ const char *get_system_type(void) ...@@ -47,14 +45,14 @@ const char *get_system_type(void)
return "Alchemy Pb1000"; return "Alchemy Pb1000";
} }
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) void __init prom_init(void)
{ {
unsigned char *memsize_str; unsigned char *memsize_str;
unsigned long memsize; unsigned long memsize;
prom_argc = argc; prom_argc = (int) fw_arg0;
prom_argv = argv; prom_argv = (char **) fw_arg1;
prom_envp = envp; prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY; mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1000; mips_machtype = MACH_PB1000;
......
This diff is collapsed.
...@@ -4,14 +4,5 @@ ...@@ -4,14 +4,5 @@
# ppopov@mvista.com or source@mvista.com # ppopov@mvista.com or source@mvista.com
# #
# Makefile for the Alchemy Semiconductor Pb1100 board. # Makefile for the Alchemy Semiconductor Pb1100 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
USE_STANDARD_AS_RULE := true
O_TARGET := pb1100.o
obj-y := init.o setup.o lib-y := init.o board_setup.o irqmap.o
This diff is collapsed.
This diff is collapsed.
...@@ -4,10 +4,5 @@ ...@@ -4,10 +4,5 @@
# ppopov@mvista.com or source@mvista.com # ppopov@mvista.com or source@mvista.com
# #
# Makefile for the Alchemy Semiconductor Pb1500 board. # Makefile for the Alchemy Semiconductor Pb1500 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
lib-y := init.o setup.o lib-y := init.o board_setup.o irqmap.o
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -2,6 +2,6 @@ ...@@ -2,6 +2,6 @@
# Makefile for the Cobalt micro systems family specific parts of the kernel # Makefile for the Cobalt micro systems family specific parts of the kernel
# #
obj-y := irq.o int-handler.o reset.o setup.o via.o promcon.o obj-y := irq.o int-handler.o reset.o setup.o promcon.o
EXTRA_AFLAGS := $(CFLAGS) EXTRA_AFLAGS := $(CFLAGS)
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment