Commit 79946723 authored by Lyude Paul's avatar Lyude Paul Committed by Jani Nikula

drm/i915: Assume 100% brightness when not in DPCD control mode

Currently we always determine the initial panel brightness level by
simply reading the value from DP_EDP_BACKLIGHT_BRIGHTNESS_MSB/LSB. This
seems wrong though, because if the panel is not currently in DPCD
control mode there's not really any reason why there would be any
brightness value programmed in the first place.

This appears to be the case on the Lenovo ThinkPad X1 Extreme 2nd
Generation, where the default value in these registers is always 0 on
boot despite the fact the panel runs at max brightness by default.
Getting the initial brightness value correct here is important as well,
since the panel on this laptop doesn't behave well if it's ever put into
DPCD control mode while the brightness level is programmed to 0.

So, let's fix this by checking what the current backlight control mode
is before reading the brightness level. If it's in DPCD control mode, we
return the programmed brightness level. Otherwise we assume 100%
brightness and return the highest possible brightness level. This also
prevents us from accidentally programming a brightness level of 0.

This is one of the many fixes that gets backlight controls working on
the ThinkPad X1 Extreme 2nd Generation with optional 4K AMOLED screen.

Changes since v1:
* s/DP_EDP_DISPLAY_CONTROL_REGISTER/DP_EDP_BACKLIGHT_MODE_SET_REGISTER/
  - Jani
Tested-by: default avatarAceLan Kao <acelan.kao@canonical.com>
Tested-by: default avatarPerry Yuan <pyuan@redhat.com>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-3-lyude@redhat.com
parent fde7266f
...@@ -59,8 +59,25 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector) ...@@ -59,8 +59,25 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
{ {
struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
u8 read_val[2] = { 0x0 }; u8 read_val[2] = { 0x0 };
u8 mode_reg;
u16 level = 0; u16 level = 0;
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
&mode_reg) != 1) {
DRM_DEBUG_KMS("Failed to read the DPCD register 0x%x\n",
DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
return 0;
}
/*
* If we're not in DPCD control mode yet, the programmed brightness
* value is meaningless and we should assume max brightness
*/
if ((mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) !=
DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD)
return connector->panel.backlight.max;
if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
&read_val, sizeof(read_val)) < 0) { &read_val, sizeof(read_val)) < 0) {
DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment