Commit 7e9d2850 authored by Lee Jones's avatar Lee Jones Committed by Patrice Chotard

ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)

The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs.  If this clock isn't handled correctly by ST's EHCI/OHCI
drivers, their hub won't be found, the following error be shown and the
result will be non-working USB:

  [   97.221963] hub 2-1:1.0: hub_ext_port_status failed (err = -110)

Cc: stable@vger.kernel.org
Tested-by: default avatarPeter Griffin <peter.griffin@linaro.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Acked-by: default avatarPatrice Chotard <patrice.chotard@st.com>
parent 29b4817d
...@@ -41,7 +41,8 @@ ohci0: usb@9a03c00 { ...@@ -41,7 +41,8 @@ ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x"; compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>; reg = <0x9a03c00 0x100>;
interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>; <&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset"; reset-names = "power", "softreset";
...@@ -57,7 +58,8 @@ ehci0: usb@9a03e00 { ...@@ -57,7 +58,8 @@ ehci0: usb@9a03e00 {
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>; pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>; <&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset"; reset-names = "power", "softreset";
...@@ -71,7 +73,8 @@ ohci1: usb@9a83c00 { ...@@ -71,7 +73,8 @@ ohci1: usb@9a83c00 {
compatible = "st,st-ohci-300x"; compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>; reg = <0x9a83c00 0x100>;
interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>; <&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset"; reset-names = "power", "softreset";
...@@ -87,7 +90,8 @@ ehci1: usb@9a83e00 { ...@@ -87,7 +90,8 @@ ehci1: usb@9a83e00 {
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>; pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>; <&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset"; reset-names = "power", "softreset";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment