Commit 9d036904 authored by David S. Miller's avatar David S. Miller

Merge nuts.ninka.net:/home/davem/src/BK/sparc-sound-2.5

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5
parents 94eda096 581c1c1a
...@@ -70,7 +70,6 @@ source drivers/mtd/Config.in ...@@ -70,7 +70,6 @@ source drivers/mtd/Config.in
source drivers/serial/Config.in source drivers/serial/Config.in
if [ "$CONFIG_SUN4" != "y" ]; then if [ "$CONFIG_SUN4" != "y" ]; then
source drivers/sbus/char/Config.in source drivers/sbus/char/Config.in
source drivers/sbus/audio/Config.in
fi fi
mainmenu_option next_comment mainmenu_option next_comment
...@@ -223,9 +222,15 @@ source drivers/input/Config.in ...@@ -223,9 +222,15 @@ source drivers/input/Config.in
source fs/Config.in source fs/Config.in
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate 'Sound card support' CONFIG_SOUND
source net/bluetooth/Config.in if [ "$CONFIG_SOUND" != "n" ]; then
source sound/Config.in
fi fi
endmenu
source drivers/usb/Config.in
source net/bluetooth/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'Watchdog' comment 'Watchdog'
......
...@@ -78,7 +78,6 @@ endmenu ...@@ -78,7 +78,6 @@ endmenu
source drivers/serial/Config.in source drivers/serial/Config.in
source drivers/sbus/char/Config.in source drivers/sbus/char/Config.in
source drivers/sbus/audio/Config.in
source drivers/mtd/Config.in source drivers/mtd/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'Block devices' comment 'Block devices'
......
...@@ -159,13 +159,6 @@ CONFIG_OBP_FLASH=m ...@@ -159,13 +159,6 @@ CONFIG_OBP_FLASH=m
# CONFIG_SUN_VIDEOPIX is not set # CONFIG_SUN_VIDEOPIX is not set
CONFIG_SUN_AURORA=m CONFIG_SUN_AURORA=m
#
# Linux/SPARC audio subsystem (EXPERIMENTAL)
#
CONFIG_SPARCAUDIO=m
CONFIG_SPARCAUDIO_CS4231=m
# CONFIG_SPARCAUDIO_DUMMY is not set
# #
# Memory Technology Devices (MTD) # Memory Technology Devices (MTD)
# #
...@@ -497,6 +490,7 @@ CONFIG_8139TOO=m ...@@ -497,6 +490,7 @@ CONFIG_8139TOO=m
CONFIG_SIS900=m CONFIG_SIS900=m
CONFIG_EPIC100=m CONFIG_EPIC100=m
CONFIG_SUNDANCE=m CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not set # CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set # CONFIG_VIA_RHINE_MMIO is not set
...@@ -842,7 +836,64 @@ CONFIG_SOUND=m ...@@ -842,7 +836,64 @@ CONFIG_SOUND=m
# #
# Advanced Linux Sound Architecture # Advanced Linux Sound Architecture
# #
# CONFIG_SND is not set CONFIG_SND=m
CONFIG_SND_BIT32_EMUL=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DEBUG_MEMORY is not set
# CONFIG_SND_DEBUG_DETECT is not set
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_ALI5451=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_ACCEPT_VALID=y
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_KORG1212=m
CONFIG_SND_NM256=m
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
CONFIG_SND_ICE1712=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA686=m
CONFIG_SND_VIA8233=m
#
# ALSA Sparc devices
#
CONFIG_SND_SUN_AMD7930=m
CONFIG_SND_SUN_CS4231=m
# #
# USB support # USB support
......
CONFIG_SPARCAUDIO
This driver provides support for the build-in sound devices on most
Sun machines. If you want to be able to use this, select this option
and one or more of the lowlevel drivers below. See
<http://www.dementia.org/~shadow/sparcaudio.html> for more
information.
CONFIG_SPARCAUDIO_AMD7930
This driver supports the AMD 7930 chip found on sun4c, 4/6xx, and
SparcClassic systems.
CONFIG_SPARCAUDIO_CS4231
This driver supports the Crystal Semiconductor CS4231 chip found on
the SS4, SS5, and Ultras.
CONFIG_SPARCAUDIO_DBRI
This driver supports the DBRI audio interface found on the SS10,
SS20, Sparcbook 3, and Voyager systems.
CONFIG_SPARCAUDIO_DUMMY
This is a pseudo-driver used for debugging and testing the
sparcaudio subsystem. Say N unless you want to work on this
subsystem.
#
# Configuration script for sparcaudio subsystem
#
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
mainmenu_option next_comment
comment 'Linux/SPARC audio subsystem (EXPERIMENTAL)'
tristate 'Audio support (EXPERIMENTAL)' CONFIG_SPARCAUDIO
if [ "$CONFIG_SPARC64" != "y" ]; then
dep_tristate ' AMD7930 Lowlevel Driver' CONFIG_SPARCAUDIO_AMD7930 $CONFIG_SPARCAUDIO
dep_tristate ' DBRI Lowlevel Driver' CONFIG_SPARCAUDIO_DBRI $CONFIG_SPARCAUDIO
fi
dep_tristate ' CS4231 Lowlevel Driver' CONFIG_SPARCAUDIO_CS4231 $CONFIG_SPARCAUDIO
dep_tristate ' Dummy Lowlevel Driver' CONFIG_SPARCAUDIO_DUMMY $CONFIG_SPARCAUDIO
endmenu
fi
#
# Makefile for the kernel SPARC audio drivers.
#
# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
# Rewritten to use lists instead of if-statements.
#
export-objs := audio.o amd7930.o dbri.o
obj-$(CONFIG_SPARCAUDIO) += audio.o
obj-$(CONFIG_SPARCAUDIO_AMD7930) += amd7930.o
obj-$(CONFIG_SPARCAUDIO_DBRI) += dbri.o
obj-$(CONFIG_SPARCAUDIO_CS4231) += cs4231.o
obj-$(CONFIG_SPARCAUDIO_DUMMY) += dmy.o
include $(TOPDIR)/Rules.make
This diff is collapsed.
/* $Id: amd7930.h,v 1.8 1999/09/21 14:37:10 davem Exp $
* drivers/sbus/audio/amd7930.h
*
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
*
* Definitions for the AMD79C30 Digital Subscriber Controller which is
* used as an audio chip in sun4c architecture machines. The
* information in this file is based on Advanced Micro Devices
* Publication 09893, Rev G, Amendment /0, Final (a.k.a. the data
* sheet).
*/
#ifndef _AMD7930_H_
#define _AMD7930_H_
#include <linux/types.h>
#include <linux/version.h>
/* Register interface presented to the CPU by the amd7930. */
#define CR 0x00UL /* Command Register (W) */
#define IR CR /* Interrupt Register (R) */
#define DR 0x01UL /* Data Register (R/W) */
#define DSR1 0x02UL /* D-channel Status Register 1 (R) */
#define DER 0x03UL /* D-channel Error Register (R) */
#define DCTB 0x04UL /* D-channel Transmit Buffer (W) */
#define DCRB DCTB /* D-channel Receive Buffer (R) */
#define BBTB 0x05UL /* Bb-channel Transmit Buffer (W) */
#define BBRB BBTB /* Bb-channel Receive Buffer (R) */
#define BCTB 0x06UL /* Bc-channel Transmit Buffer (W) */
#define BCRB BCTB /* Bc-channel Receive Buffer (R) */
#define DSR2 0x07UL /* D-channel Status Register 2 (R) */
/* Indirect registers in the Main Audio Processor. */
struct amd7930_map {
__u16 x[8];
__u16 r[8];
__u16 gx;
__u16 gr;
__u16 ger;
__u16 stgr;
__u16 ftgr;
__u16 atgr;
__u8 mmr1;
__u8 mmr2;
};
/* After an amd7930 interrupt, reading the Interrupt Register (ir)
* clears the interrupt and returns a bitmask indicated which
* interrupt source(s) require service
*/
#define AMR_IR_DTTHRSH 0x01 /* D-channel xmit threshold */
#define AMR_IR_DRTHRSH 0x02 /* D-channel recv threshold */
#define AMR_IR_DSRI 0x04 /* D-channel packet status */
#define AMR_IR_DERI 0x08 /* D-channel error */
#define AMR_IR_BBUF 0x10 /* B-channel data xfer */
#define AMR_IR_LSRI 0x20 /* LIU status */
#define AMR_IR_DSR2I 0x40 /* D-channel buffer status */
#define AMR_IR_MLTFRMI 0x80 /* multiframe or PP */
/* The amd7930 has "indirect registers" which are accessed by writing
* the register number into the Command Register and then reading or
* writing values from the Data Register as appropriate. We define the
* AMR_* macros to be the indirect register numbers and AM_* macros to
* be bits in whatever register is referred to.
*/
/* Initialization */
#define AMR_INIT 0x21
#define AM_INIT_ACTIVE 0x01
#define AM_INIT_DATAONLY 0x02
#define AM_INIT_POWERDOWN 0x03
#define AM_INIT_DISABLE_INTS 0x04
#define AMR_INIT2 0x20
#define AM_INIT2_ENABLE_POWERDOWN 0x20
#define AM_INIT2_ENABLE_MULTIFRAME 0x10
/* Line Interface Unit */
#define AMR_LIU_LSR 0xA1
#define AM_LIU_LSR_STATE 0x07
#define AM_LIU_LSR_F3 0x08
#define AM_LIU_LSR_F7 0x10
#define AM_LIU_LSR_F8 0x20
#define AM_LIU_LSR_HSW 0x40
#define AM_LIU_LSR_HSW_CHG 0x80
#define AMR_LIU_LPR 0xA2
#define AMR_LIU_LMR1 0xA3
#define AM_LIU_LMR1_B1_ENABL 0x01
#define AM_LIU_LMR1_B2_ENABL 0x02
#define AM_LIU_LMR1_F_DISABL 0x04
#define AM_LIU_LMR1_FA_DISABL 0x08
#define AM_LIU_LMR1_REQ_ACTIV 0x10
#define AM_LIU_LMR1_F8_F3 0x20
#define AM_LIU_LMR1_LIU_ENABL 0x40
#define AMR_LIU_LMR2 0xA4
#define AM_LIU_LMR2_DECHO 0x01
#define AM_LIU_LMR2_DLOOP 0x02
#define AM_LIU_LMR2_DBACKOFF 0x04
#define AM_LIU_LMR2_EN_F3_INT 0x08
#define AM_LIU_LMR2_EN_F8_INT 0x10
#define AM_LIU_LMR2_EN_HSW_INT 0x20
#define AM_LIU_LMR2_EN_F7_INT 0x40
#define AMR_LIU_2_4 0xA5
#define AMR_LIU_MF 0xA6
#define AMR_LIU_MFSB 0xA7
#define AMR_LIU_MFQB 0xA8
/* Multiplexor */
#define AMR_MUX_MCR1 0x41
#define AMR_MUX_MCR2 0x42
#define AMR_MUX_MCR3 0x43
#define AM_MUX_CHANNEL_B1 0x01
#define AM_MUX_CHANNEL_B2 0x02
#define AM_MUX_CHANNEL_Ba 0x03
#define AM_MUX_CHANNEL_Bb 0x04
#define AM_MUX_CHANNEL_Bc 0x05
#define AM_MUX_CHANNEL_Bd 0x06
#define AM_MUX_CHANNEL_Be 0x07
#define AM_MUX_CHANNEL_Bf 0x08
#define AMR_MUX_MCR4 0x44
#define AM_MUX_MCR4_ENABLE_INTS 0x08
#define AM_MUX_MCR4_REVERSE_Bb 0x10
#define AM_MUX_MCR4_REVERSE_Bc 0x20
#define AMR_MUX_1_4 0x45
/* Main Audio Processor */
#define AMR_MAP_X 0x61
#define AMR_MAP_R 0x62
#define AMR_MAP_GX 0x63
#define AMR_MAP_GR 0x64
#define AMR_MAP_GER 0x65
#define AMR_MAP_STGR 0x66
#define AMR_MAP_FTGR_1_2 0x67
#define AMR_MAP_ATGR_1_2 0x68
#define AMR_MAP_MMR1 0x69
#define AM_MAP_MMR1_ALAW 0x01
#define AM_MAP_MMR1_GX 0x02
#define AM_MAP_MMR1_GR 0x04
#define AM_MAP_MMR1_GER 0x08
#define AM_MAP_MMR1_X 0x10
#define AM_MAP_MMR1_R 0x20
#define AM_MAP_MMR1_STG 0x40
#define AM_MAP_MMR1_LOOPBACK 0x80
#define AMR_MAP_MMR2 0x6A
#define AM_MAP_MMR2_AINB 0x01
#define AM_MAP_MMR2_LS 0x02
#define AM_MAP_MMR2_ENABLE_DTMF 0x04
#define AM_MAP_MMR2_ENABLE_TONEGEN 0x08
#define AM_MAP_MMR2_ENABLE_TONERING 0x10
#define AM_MAP_MMR2_DISABLE_HIGHPASS 0x20
#define AM_MAP_MMR2_DISABLE_AUTOZERO 0x40
#define AMR_MAP_1_10 0x6B
#define AMR_MAP_MMR3 0x6C
#define AMR_MAP_STRA 0x6D
#define AMR_MAP_STRF 0x6E
#define AMR_MAP_PEAKX 0x70
#define AMR_MAP_PEAKR 0x71
#define AMR_MAP_15_16 0x72
/* Data Link Controller */
#define AMR_DLC_FRAR_1_2_3 0x81
#define AMR_DLC_SRAR_1_2_3 0x82
#define AMR_DLC_TAR 0x83
#define AMR_DLC_DRLR 0x84
#define AMR_DLC_DTCR 0x85
#define AMR_DLC_DMR1 0x86
#define AMR_DLC_DMR1_DTTHRSH_INT 0x01
#define AMR_DLC_DMR1_DRTHRSH_INT 0x02
#define AMR_DLC_DMR1_TAR_ENABL 0x04
#define AMR_DLC_DMR1_EORP_INT 0x08
#define AMR_DLC_DMR1_EN_ADDR1 0x10
#define AMR_DLC_DMR1_EN_ADDR2 0x20
#define AMR_DLC_DMR1_EN_ADDR3 0x40
#define AMR_DLC_DMR1_EN_ADDR4 0x80
#define AMR_DLC_DMR1_EN_ADDRS 0xf0
#define AMR_DLC_DMR2 0x87
#define AMR_DLC_DMR2_RABRT_INT 0x01
#define AMR_DLC_DMR2_RESID_INT 0x02
#define AMR_DLC_DMR2_COLL_INT 0x04
#define AMR_DLC_DMR2_FCS_INT 0x08
#define AMR_DLC_DMR2_OVFL_INT 0x10
#define AMR_DLC_DMR2_UNFL_INT 0x20
#define AMR_DLC_DMR2_OVRN_INT 0x40
#define AMR_DLC_DMR2_UNRN_INT 0x80
#define AMR_DLC_1_7 0x88
#define AMR_DLC_DRCR 0x89
#define AMR_DLC_RNGR1 0x8A
#define AMR_DLC_RNGR2 0x8B
#define AMR_DLC_FRAR4 0x8C
#define AMR_DLC_SRAR4 0x8D
#define AMR_DLC_DMR3 0x8E
#define AMR_DLC_DMR3_VA_INT 0x01
#define AMR_DLC_DMR3_EOTP_INT 0x02
#define AMR_DLC_DMR3_LBRP_INT 0x04
#define AMR_DLC_DMR3_RBA_INT 0x08
#define AMR_DLC_DMR3_LBT_INT 0x10
#define AMR_DLC_DMR3_TBE_INT 0x20
#define AMR_DLC_DMR3_RPLOST_INT 0x40
#define AMR_DLC_DMR3_KEEP_FCS 0x80
#define AMR_DLC_DMR4 0x8F
#define AMR_DLC_DMR4_RCV_1 0x00
#define AMR_DLC_DMR4_RCV_2 0x01
#define AMR_DLC_DMR4_RCV_4 0x02
#define AMR_DLC_DMR4_RCV_8 0x03
#define AMR_DLC_DMR4_RCV_16 0x01
#define AMR_DLC_DMR4_RCV_24 0x02
#define AMR_DLC_DMR4_RCV_30 0x03
#define AMR_DLC_DMR4_XMT_1 0x00
#define AMR_DLC_DMR4_XMT_2 0x04
#define AMR_DLC_DMR4_XMT_4 0x08
#define AMR_DLC_DMR4_XMT_8 0x0c
#define AMR_DLC_DMR4_XMT_10 0x08
#define AMR_DLC_DMR4_XMT_14 0x0c
#define AMR_DLC_DMR4_IDLE_MARK 0x00
#define AMR_DLC_DMR4_IDLE_FLAG 0x10
#define AMR_DLC_DMR4_ADDR_BOTH 0x00
#define AMR_DLC_DMR4_ADDR_1ST 0x20
#define AMR_DLC_DMR4_ADDR_2ND 0xa0
#define AMR_DLC_DMR4_CR_ENABLE 0x40
#define AMR_DLC_12_15 0x90
#define AMR_DLC_ASR 0x91
#define AMR_DLC_EFCR 0x92
#define AMR_DLC_EFCR_EXTEND_FIFO 0x01
#define AMR_DLC_EFCR_SEC_PKT_INT 0x02
#define AMR_DSR1_VADDR 0x01
#define AMR_DSR1_EORP 0x02
#define AMR_DSR1_PKT_IP 0x04
#define AMR_DSR1_DECHO_ON 0x08
#define AMR_DSR1_DLOOP_ON 0x10
#define AMR_DSR1_DBACK_OFF 0x20
#define AMR_DSR1_EOTP 0x40
#define AMR_DSR1_CXMT_ABRT 0x80
#define AMR_DSR2_LBRP 0x01
#define AMR_DSR2_RBA 0x02
#define AMR_DSR2_RPLOST 0x04
#define AMR_DSR2_LAST_BYTE 0x08
#define AMR_DSR2_TBE 0x10
#define AMR_DSR2_MARK_IDLE 0x20
#define AMR_DSR2_FLAG_IDLE 0x40
#define AMR_DSR2_SECOND_PKT 0x80
#define AMR_DER_RABRT 0x01
#define AMR_DER_RFRAME 0x02
#define AMR_DER_COLLISION 0x04
#define AMR_DER_FCS 0x08
#define AMR_DER_OVFL 0x10
#define AMR_DER_UNFL 0x20
#define AMR_DER_OVRN 0x40
#define AMR_DER_UNRN 0x80
/* Peripheral Port */
#define AMR_PP_PPCR1 0xC0
#define AMR_PP_PPSR 0xC1
#define AMR_PP_PPIER 0xC2
#define AMR_PP_MTDR 0xC3
#define AMR_PP_MRDR 0xC3
#define AMR_PP_CITDR0 0xC4
#define AMR_PP_CIRDR0 0xC4
#define AMR_PP_CITDR1 0xC5
#define AMR_PP_CIRDR1 0xC5
#define AMR_PP_PPCR2 0xC8
#define AMR_PP_PPCR3 0xC9
/* Give this chip a "default" sample rate */
#define AMD7930_RATE (8000)
#endif /* _AMD7930_H_ */
This source diff could not be displayed because it is too large. You can view the blob instead.
/* $Id: cs4215.h,v 1.8 2000/10/27 07:01:38 uzi Exp $
* drivers/sbus/audio/cs4215.h
*
* Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de)
* Used with dbri.h
*/
#ifndef _CS4215_H_
#define _CS4215_H_
struct cs4215 {
__u8 data[4]; /* Data mode: Time slots 5-8 */
__u8 ctrl[4]; /* Ctrl mode: Time slots 1-4 */
__u8 onboard;
__u8 offset; /* Bit offset from frame sync to time slot 1 */
volatile __u32 status;
volatile __u32 version;
};
/*
* Control mode first
*/
/* Time Slot 1, Status register */
#define CS4215_CLB (1<<2) /* Control Latch Bit */
#define CS4215_OLB (1<<3) /* 1: line: 2.0V, speaker 4V */
/* 0: line: 2.8V, speaker 8V */
#define CS4215_MLB (1<<4) /* 1: Microphone: 20dB gain disabled */
#define CS4215_RSRVD_1 (1<<5)
/* Time Slot 2, Data Format Register */
#define CS4215_DFR_LINEAR16 0
#define CS4215_DFR_ULAW 1
#define CS4215_DFR_ALAW 2
#define CS4215_DFR_LINEAR8 3
#define CS4215_DFR_STEREO (1<<2)
static struct {
unsigned short freq;
unsigned char xtal;
unsigned char csval;
} CS4215_FREQ[] = {
{ 8000, (1<<4), (0<<3) },
{ 16000, (1<<4), (1<<3) },
{ 27429, (1<<4), (2<<3) }, /* Actually 24428.57 */
{ 32000, (1<<4), (3<<3) },
/* { NA, (1<<4), (4<<3) }, */
/* { NA, (1<<4), (5<<3) }, */
{ 48000, (1<<4), (6<<3) },
{ 9600, (1<<4), (7<<3) },
{ 5513, (2<<4), (0<<3) }, /* Actually 5512.5 */
{ 11025, (2<<4), (1<<3) },
{ 18900, (2<<4), (2<<3) },
{ 22050, (2<<4), (3<<3) },
{ 37800, (2<<4), (4<<3) },
{ 44100, (2<<4), (5<<3) },
{ 33075, (2<<4), (6<<3) },
{ 6615, (2<<4), (7<<3) },
{ 0, 0, 0 }
};
#define CS4215_HPF (1<<7) /* High Pass Filter, 1: Enabled */
#define CS4215_12_MASK 0xfcbf /* Mask off reserved bits in slot 1 & 2 */
/* Time Slot 3, Serial Port Control register */
#define CS4215_XEN (1<<0) /* 0: Enable serial output */
#define CS4215_XCLK (1<<1) /* 1: Master mode: Generate SCLK */
#define CS4215_BSEL_64 (0<<2) /* Bitrate: 64 bits per frame */
#define CS4215_BSEL_128 (1<<2)
#define CS4215_BSEL_256 (2<<2)
#define CS4215_MCK_MAST (0<<4) /* Master clock */
#define CS4215_MCK_XTL1 (1<<4) /* 24.576 MHz clock source */
#define CS4215_MCK_XTL2 (2<<4) /* 16.9344 MHz clock source */
#define CS4215_MCK_CLK1 (3<<4) /* Clockin, 256 x Fs */
#define CS4215_MCK_CLK2 (4<<4) /* Clockin, see DFR */
/* Time Slot 4, Test Register */
#define CS4215_DAD (1<<0) /* 0:Digital-Dig loop, 1:Dig-Analog-Dig loop */
#define CS4215_ENL (1<<1) /* Enable Loopback Testing */
/* Time Slot 5, Parallel Port Register */
/* Read only here and the same as the in data mode */
/* Time Slot 6, Reserved */
/* Time Slot 7, Version Register */
#define CS4215_VERSION_MASK 0xf /* Known versions 0/C, 1/D, 2/E */
/* Time Slot 8, Reserved */
/*
* Data mode
*/
/* Time Slot 1-2: Left Channel Data, 2-3: Right Channel Data */
/* Time Slot 5, Output Setting */
#define CS4215_LO(v) v /* Left Output Attenuation 0x3f: -94.5 dB */
#define CS4215_LE (1<<6) /* Line Out Enable */
#define CS4215_HE (1<<7) /* Headphone Enable */
/* Time Slot 6, Output Setting */
#define CS4215_RO(v) v /* Right Output Attenuation 0x3f: -94.5 dB */
#define CS4215_SE (1<<6) /* Speaker Enable */
#define CS4215_ADI (1<<7) /* A/D Data Invalid: Busy in calibration */
/* Time Slot 7, Input Setting */
#define CS4215_LG(v) v /* Left Gain Setting 0xf: 22.5 dB */
#define CS4215_IS (1<<4) /* Input Select: 1=Microphone, 0=Line */
#define CS4215_OVR (1<<5) /* 1: Overrange condition occurred */
#define CS4215_PIO0 (1<<6) /* Parallel I/O 0 */
#define CS4215_PIO1 (1<<7)
/* Time Slot 8, Input Setting */
#define CS4215_RG(v) v /* Right Gain Setting 0xf: 22.5 dB */
#define CS4215_MA(v) (v<<4) /* Monitor Path Attenuation 0xf: mute */
#endif /* _CS4215_H_ */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
/* $Id: dummy.h,v 1.3 1999/09/21 14:37:41 davem Exp $
* drivers/sbus/audio/dummy.h
*
* Copyright (C) 1998 Derrick J. Brashear (shadow@dementia.org)
*/
#ifndef _DUMMY_H_
#define _DUMMY_H_
#include <linux/types.h>
#include <linux/tqueue.h>
#define DUMMY_OUTFILE "/usr/tmp/dummy.au"
/* Our structure for each chip */
struct dummy_chip {
struct audio_info perchip_info;
unsigned int playlen;
struct tq_struct tqueue;
};
#define DUMMY_MIN_ATEN (0)
#define DUMMY_MAX_ATEN (31)
#define DUMMY_MAX_DEV_ATEN (63)
#define DUMMY_MON_MIN_ATEN (0)
#define DUMMY_MON_MAX_ATEN (63)
#define DUMMY_DEFAULT_PLAYGAIN (132)
#define DUMMY_DEFAULT_RECGAIN (126)
#define DUMMY_MIN_GAIN (0)
#define DUMMY_MAX_GAIN (15)
#define DUMMY_PRECISION (8) /* # of bits/sample */
#define DUMMY_CHANNELS (1) /* channels/sample */
#define DUMMY_RATE (8000) /* default sample rate */
#endif /* _DUMMY_H_ */
This diff is collapsed.
This diff is collapsed.
...@@ -22,9 +22,8 @@ ...@@ -22,9 +22,8 @@
* *
*/ */
#ifdef CONFIG_PM #include <linux/sched.h> /* wake_up() */
#include <linux/sched.h> /* wake_up() and struct semaphore */ #include <asm/semaphore.h> /* struct semaphore */
#endif
/* Typedef's */ /* Typedef's */
typedef struct timeval snd_timestamp_t; typedef struct timeval snd_timestamp_t;
...@@ -38,6 +37,9 @@ typedef struct sndrv_xferv snd_xferv_t; ...@@ -38,6 +37,9 @@ typedef struct sndrv_xferv snd_xferv_t;
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
struct pci_dev; struct pci_dev;
#endif #endif
#ifdef CONFIG_SBUS
struct sbus_dev;
#endif
/* device allocation stuff */ /* device allocation stuff */
...@@ -256,6 +258,11 @@ void *snd_malloc_pci_pages(struct pci_dev *pci, unsigned long size, dma_addr_t * ...@@ -256,6 +258,11 @@ void *snd_malloc_pci_pages(struct pci_dev *pci, unsigned long size, dma_addr_t *
void *snd_malloc_pci_pages_fallback(struct pci_dev *pci, unsigned long size, dma_addr_t *dma_addr, unsigned long *res_size); void *snd_malloc_pci_pages_fallback(struct pci_dev *pci, unsigned long size, dma_addr_t *dma_addr, unsigned long *res_size);
void snd_free_pci_pages(struct pci_dev *pci, unsigned long size, void *ptr, dma_addr_t dma_addr); void snd_free_pci_pages(struct pci_dev *pci, unsigned long size, void *ptr, dma_addr_t dma_addr);
#endif #endif
#ifdef CONFIG_SBUS
void *snd_malloc_sbus_pages(struct sbus_dev *sdev, unsigned long size, dma_addr_t *dma_addr);
void *snd_malloc_sbus_pages_fallback(struct sbus_dev *sdev, unsigned long size, dma_addr_t *dma_addr, unsigned long *res_size);
void snd_free_sbus_pages(struct sbus_dev *sdev, unsigned long size, void *ptr, dma_addr_t dma_addr);
#endif
#ifdef CONFIG_ISA #ifdef CONFIG_ISA
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
#define snd_malloc_isa_pages(size, dma_addr) snd_malloc_pci_pages(NULL, size, dma_addr) #define snd_malloc_isa_pages(size, dma_addr) snd_malloc_pci_pages(NULL, size, dma_addr)
......
This diff is collapsed.
...@@ -23,6 +23,9 @@ ...@@ -23,6 +23,9 @@
*/ */
#include <sound/asound.h> #include <sound/asound.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <asm/semaphore.h>
#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE) #if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
#include "seq_device.h" #include "seq_device.h"
......
This diff is collapsed.
...@@ -5,7 +5,7 @@ export-objs := sound_core.o ...@@ -5,7 +5,7 @@ export-objs := sound_core.o
obj-$(CONFIG_SOUND) += soundcore.o obj-$(CONFIG_SOUND) += soundcore.o
obj-$(CONFIG_SOUND_PRIME) += oss/ obj-$(CONFIG_SOUND_PRIME) += oss/
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ sparc/
ifeq ($(CONFIG_SND),y) ifeq ($(CONFIG_SND),y)
obj-y += last.o obj-y += last.o
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment